This patch fixes some minor bugs introduced by the previous patch (remove
old syscalls).  Both patches remove the obsolete syscalls.  The changes in
this patch were suggested by Arnd Bergmann.  The vmlinux.lds.S changes are
required for the latest gcc/binutils.
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a fairly serious tlb flushing bug that makes aio use under
uml very unreliable -- SEGVs, Oops and panic()s occur as a result of stale
tlb entires being used by uml when aio switches mms due to the fact that
uml does not implement the activate_mm() hook.  This patch introduces a
simple but correct approach (read: hammer) for implementing activate_mm()
in uml by doing a force_flush_all() if the new mm is different from old.
With this patch in place, uml is able to succeed at the aio test case that
was randomly faulting for me before.

Cc: Jeff Dike <jdike@addtoit.com>
Cc: <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

make clean ARCH=um does not remove the generated file
arch/um/include/user_constants.h, fix this.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mm/filemap_xip.c: In function `__xip_unmap':
mm/filemap_xip.c:194: request for member `pte' in something not a structure or union

Apparently pte_pfn() takes a pte_t, not a pointer to a pte_t.  From looking
at asm/page.h, it seems to be the same on ia32 or ppc (iff
STRICT_MM_TYPECHECKS is enabled, which is disabled by default on ppc).
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current CardBus window allocation code in yenta_socket is unable to handle
the transparent PCI-bridge handling update in 2.6.13.  We need to check _all_
resources of a given type to find the best one suitable for CardBus windows,
not just the first one.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/pci/setup-bus.c enumerates the CardBus windows (bus->resources[])
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update PCMCIA driver changes for patches merged in 2.6.13
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the CardBus windows were pre-configured and the CardBus bridge is behind a
transparent PCI-PCI bridge, pci_find_parent_resource() might return a
different resource than the real parent if it is called before the window is
determined.  Therefore, move that call around.

Also fix return of value in void function.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix pcmcia-cs compilation with recent pcmcia kernel changes.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the second time this has happened: inserting a new section requires
that we adjust the arithmetic which is used to calculate the vsyscall page's
offset.

Cc: Christoph Lameter <christoph@lameter.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bug symptoms
~~~~~~~~~~~~
For the same inode VFS calls read_inode() twice and doesn't call
clear_inode() between the two read_inode() invocations.

Bug description
~~~~~~~~~~~~~~~
Suppose we have an inode which has zero reference count but is still in
the inode cache. Suppose kswapd invokes shrink_icache_memory() to free
some RAM. In prune_icache() inodes are removed from i_hash. prune_icache
() is then going to call clear_inode(), but drops the inode_lock
spinlock before this. If in this moment another task calls iget() for an
inode which was just removed from i_hash by prune_icache(), then iget()
invokes read_inode() for this inode, because it is *already removed*
from i_hash.

The end result is: we call iget(#N) then iput(#N); inode #N has zero
i_count now and is in the inode cache; kswapd starts. kswapd removes the
inode #N from i_hash ans is preempted; we call iget(#N) again;
read_inode() is invoked as the result; but we expect clear_inode()
before.

Fix
~~~~~~~
To fix the bug I remove inodes from i_hash later, when clear_inode() is
actually called. I remove them from i_hash under spinlock protection.
Since the i_state is set to I_FREEING, it is safe to do this. The others
will sleep waiting for the inode state change.

I also postpone removing inodes from i_sb_list. It is not compulsory to
do so but I do it for readability reasons. Inodes are added/removed to
the lists together everywhere in the code and there is no point to
change this rule. This is harmless because the only user of i_sb_list
which somehow may interfere with me (invalidate_list()) is excluded by
the iprune_sem mutex.

The same race is possible in invalidate_list() so I do the same for it.
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes queer behavior in __wait_on_freeing_inode().

If I_LOCK was not set it called yield(), effectively busy waiting for the
removal of the inode from the hash.  This change was introduced within
"[PATCH] eliminate inode waitqueue hashtable" Changeset 1.1938.166.16 last
october by wli.

The solution is to restore the old behavior, of unconditionally waiting on
the waitqueue.  It doesn't matter if I_LOCK is not set initally, the task
will go to sleep, and wake up when wake_up_inode() is called from
generic_delete_inode() after removing the inode from the hash chain.

Comment is also updated to better reflect current behavior.

This condition is very hard to trigger normally (simultaneous clear_inode()
with iget()) so probably only heavy stress testing can reveal any change of
behavior.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

dup_mmap of a VM_DONTCOPY vma forgot to lower the child's total_vm.  (But
no way does this account for the recent report of total_vm seen too low.)
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This shuts up a potential uninitialized variable warning.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kernel/power/disk.c needs a declaration of name_to_dev_t() in scope.  mount.h
seems like an appropriate choice.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

OK, I can see what's happening here. eth0 doesn't detect link-up until
after a few seconds, so when the vlan interface is opened immediately
after eth0 has been opened, it inherits the link-down state. Subsequently
the vlan interface is never properly activated and are thus unable to
transmit any packets.

dev->state bits are not supposed to be manipulated directly. Something
similar is probably needed for the netif_device_present() bit, although
I don't know how this is meant to work for a virtual device.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

arch/sparc64/kernel/smp.c:48: error: parse error before "__attribute__"
arch/sparc64/kernel/smp.c:49: error: parse error before "__attribute__"
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tr_type_trans(), hippi_type_trans() left as-is.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Revert the nf_reset change that caused so much trouble, drop conntrack
references manually before packets are queued to packet sockets.
Signed-off-by: NPhil Oester <kernel@linuxace.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following driver provides complete interrupt-in and interrupt-out
reports (raw data) to a user program. Until now it uses the
HIDIOCGDEVINFO ioctl call, because I don't know better :-(. Perhaps, it
will be ok for you - and I will be happy, if you assign 8 minor numbers.

I have tested it in several environments and it works very well for me.
However, it has a problem with two or more devices at the same hub, if
the two or more devices need 1 ms interrupt-in transfers. Unfortunately
more than one interrupt-in transfer every ms isn't possible (ehci
driver?). This is why the min_interrupt_in_interval and
min_interrupt_out_interval are increased to 2 ms (see the corresponding
module parameters). This way, I can use two devices simultaneously at
the same hub.
Signed-off-by: NMichael Hund <mhund@ld-didactic.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This increases the reference count on the usb cdc acm control interface
which is referred to by the tty interface provided by the driver. This
allows the deferred removal of the tty after the physical device is
disconnected if the tty is held open at the time of disconnection.

Signed-off-by: brian@murphy.dk
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Export usb_get_intf and usb_put_intf so that modules can increase
usb interface reference counts.

Signed-off-by: brian@murphy.dk
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds another CDC descriptor type to <linux/usb_cdc.h>; the main claim
to fame for this is that some Motorola phones include it.  It's not currently
needed by any driver code; included for completeness.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A patch re-organizing some parts of root hub initialization deleted the
code initializing the bus-neutral reboot/shutdown notifier for OHCI.
This patch just restores that deleted code.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The recent "pm_message_t" changes removed functionality from the Linux
PM framework.  This patch removes it from the OMAP OHCI too, removing
the distinction between (previous) PM_SUSPEND_MEM and PM_SUSPEND_DISK
state transitions ... now the only suspend semantics supportable are
what was previously PM_SUSPEND_DISK (4) and is now "PMSG_SUSPEND" (3).

From: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Minor OMAP updates that somehow got dropped from previous patches.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I also needed the following on 2.6.13-rc1 without CONFIG_USB_ETH_RNDIS,
symbol fs_status_desc isn't available in that case on PXA255.

This builds both with and without ETH_RNDIS, but I haven't actually
tested either.
Signed-off-by: NIan Campbell <icampbell@arcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NIan Campbell <icampbell@arcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

SN9C10x driver updates.

Changes: + new, - removed, * cleanup, @ bugfix

@ Remove bad get_ctrl()'s
* Documentation updates
+ Add 0x0c45/0x602d to the list of SN9C10x based devices
+ Add support for OV7630 image sensors
Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

below you will find one patch to hid-core.c, which lets usbhid ignore
our HID devices. It would be nice, if you can apply it.
Signed-off-by: NMichael Hund <mhund@ld-didactic.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The length of the array desc->bitmap is 3, and not 4:

Definitions involved:

In drivers/usb/core/hcd.h

464  	#define bitmap 	DeviceRemovable

In drivers/usb/host/ohci-hub.c

395  		struct usb_hub_descriptor	*desc

In drivers/usb/core/hub.h

130  	struct usb_hub_descriptor {
131  		__u8  bDescLength;
132  		__u8  bDescriptorType;
133  		__u8  bNbrPorts;
134  		__u16 wHubCharacteristics;
135  		__u8  bPwrOn2PwrGood;
136  		__u8  bHubContrCurrent;
137  		    	/* add 1 bit for hub status change; round to bytes */
138  		__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
139  		__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
140  	} __attribute__ ((packed));

In include/linux/usb.h

306  	#define USB_MAXCHILDREN		(16)

This defect was found automatically by Coverity Prevent, a static analysis
tool.

(akpm: this code should be shot.  Field `bitmap' doesn't exist in struct
usb_hub_descriptor.  And this .c file is #included in
drivers/usb/host/ohci-hcd.c, and someone somewhere #defines `bitmap' to
`DeviceRemovable'.

>From a maintainability POV it would be better to memset the whole array
beforehand - I changed the patch to do that)
Signed-off-by: NZaur Kambarov <zkambarov@coverity.com>
Cc: <linux-usb-devel@lists.sourceforge.net?
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver is a basic keypress input driver for the Keyspan Digital
Remote with part number UIA-11.  Currently there is an older remote with
part number UIA-10 which isn't supported by this driver.  Support for
the older UIA-10 could be added but a binary file is required to be
download to the device, and I don't have that file.  I also don't have a
UIA-10 device so I wouldn't be able to test any of the changes.
Signed-off-by: NMichael Downey <downey@zymeta.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/net2280.c: In function 'show_registers':
drivers/usb/gadget/net2280.c:1501: warning: assignment discards qualifiers from pointer target type
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Greg,

This patch fixes the kmalloc() flags argument type in USB
subsystem; hopefully all of its occurences. The patch was
made against patch-2.6.12-git2 from Jun 20.

Cleanup of flags for kmalloc() in USB subsystem.
Signed-off-by: NOlav Kongas <ok@artecdesign.ee>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Sorry that it took so long. Here comes a cleanup patch that
addresses the remarks by Alexey Dobriyan about
gregkh-usb-usb-isp116x-hcd-add.patch EXCEPT the remark about
the typecasting of mem_flags argument for kcalloc; this will
be addressed in a later patch.

OlavCleanup of isp116x-hcd.

Signed off by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>