And move the event_t methods to the perf_event__ too.

No code changes, just namespace consistency.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Making the namespace more uniform.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I.e. stash the overwrite mode in struct perf_evlist and act accordingly
in perf_evlist__read_on_cpu, not checking for overwrites and touching
the tail after consuming one event, like perf record does, for instance.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Right now this function is only used by perf top, that uses PROT_READ
only, i.e. overwrite mode, so no PERF_RECORD_LOST events are generated,
but don't forget those events.

The patch that moved this out of perf top was made so that this routine
could be used by 'perf probe' in the uprobes patchset, so perhaps there
they need to check for LOST events and warn the user, as will be done in
the following patches that will switch 'perf top' to non overwrite mode
(mmap with PROT_READ|PROT_WRITE).

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add filters support for available function list.

Default filter is "!_*" for filtering out local-purpose symbols.

e.g.:
 # perf probe --filter="add*" -F
add_disk
add_disk_randomness
add_input_randomness
add_interrupt_randomness
add_memory
add_page_to_unevictable_list
add_page_wait_queue
...

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110120141545.25915.85930.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add filters support for available variable list.

Default filter is "!__k???tab_*&!__crc_*" for filtering out
automatically generated symbols.

The format of filter rule is "[!]GLOBPATTERN", so you can use wild
cards. If the filter rule starts with '!', matched variables are filter
out.

e.g.:
 # perf probe -V schedule --externs --filter=cpu*
Available variables at schedule
        @<schedule+0>
                cpumask_var_t   cpu_callout_mask
                cpumask_var_t   cpu_core_map
                cpumask_var_t   cpu_isolated_map
                cpumask_var_t   cpu_sibling_map
                int     cpu_number
                long unsigned int*      cpu_bit_bitmap
		...

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110120141539.25915.43401.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ committer note: Removed the elf.h include as it was fixed up in e80711ca]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add strfilter for general purpose string filter.

Every filter rules are descrived by glob matching pattern and '!' prefix
which means Logical NOT.

A strfilter consists of those filter rules connected with '&' and '|'.

A set of rules can be folded by using '(' and ')'.

It also accepts spaces around rules and those operators.

Format:
<rule> ::= <glob-exp> | "!" <rule> | <rule> <op> <rule> | "(" <rule> ")"
<op> ::= "&" | "|"

e.g.:

 "(add* | del*) & *timer" filter rules pass strings which start with add
 or del and end with timer.

This will be used by perf probe --filter.

Changes in V2:
 - Fix to check result of strdup() and strfilter__alloc().
 - Encapsulate and simplify interfaces as like regex(3).

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110120141530.25915.12673.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Out of the {con,des}structor, as in interpreted language bindings we will
need to go back from the wrapper object to the real thing. In that case
using container_of will save us to have an extra pointer in the perf_evsel
struct.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To avoid linking more stuff in the python binding I'm working on, future
csets will make the sample type be taken from the evsel itself, but for
that we need to first have one file per cpu and per sample_type, not a
single perf.data file.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To untangle it from struct thread handling, that is tied to symbols, etc.

Right now in the python bindings I'm working on I need just a subset of
the util/ files, untangling it allows me to do that.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is needed because it will call parse_event for each tracepoint
name that matches, and we pass the perf_evlist via opt->value.

Problem introduced in 4503fdd where my assumption about opt being
always non NULL made me not look at callers of parse_events outside
builtin-*.c.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add --funcs to show available functions in symtab.

Originally this feature came from Srikar's uprobes patches
( http://lkml.org/lkml/2010/8/27/244 )

e.g.
...
__ablkcipher_walk_complete
__absent_pages_in_range
__account_scheduler_latency
__add_pages
__alloc_pages_nodemask
__alloc_percpu
__alloc_reserved_percpu
__alloc_skb
__alloc_workqueue_key
__any_online_cpu
__ata_ehi_push_desc
...

This also supports symbols in module, e.g.

...
cleanup_module
cpuid_maxphyaddr
emulate_clts
emulate_instruction
emulate_int_real
emulate_invlpg
emulator_get_dr
emulator_set_dr
emulator_task_switch
emulator_write_emulated
emulator_write_phys
fx_init
...

Original-patch-from: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110113124611.22426.10835.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ committer note: Add missing elf.h for STB_GLOBAL that broke a RHEL4 build ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enable to put probe inline function call site. This will increase line-based
probe-ability.

<Without this patch>
$ ./perf probe -L schedule:48
<schedule:48>
                pre_schedule(rq, prev);

     50         if (unlikely(!rq->nr_running))
                        idle_balance(cpu, rq);

                put_prev_task(rq, prev);
                next = pick_next_task(rq);

     56         if (likely(prev != next)) {
                        sched_info_switch(prev, next);
                        trace_sched_switch_out(prev, next);
                        perf_event_task_sched_out(prev, next);

<With this patch>
$ ./perf probe -L schedule:48
<schedule:48>
     48         pre_schedule(rq, prev);

     50         if (unlikely(!rq->nr_running))
     51                 idle_balance(cpu, rq);

     53         put_prev_task(rq, prev);
     54         next = pick_next_task(rq);

     56         if (likely(prev != next)) {
     57                 sched_info_switch(prev, next);
     58                 trace_sched_switch_out(prev, next);
     59                 perf_event_task_sched_out(prev, next);

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110113124604.22426.48873.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introduce die_walk_lines() for walking on the line list of given die, and use
it in line_range finder and probe point finder.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110113124558.22426.48170.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ committer note: s/%ld/%zd/ for a size_t nlines var that broke f14 x86 build]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some little callchain tree nodes shyly asked me if they can have
sisters.

How cute!

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To make the callchain API naming more consistent.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That makes the callchain API naming more consistent and
reduce potential naming clashes.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The callchains are fed with an array of a fixed size.
As a result we iterate over each callchains three times:

- 1st to resolve symbols
- 2nd to filter out context boundaries
- 3rd for the insertion into the tree

This also involves some pairs of memory allocation/deallocation
everytime we insert a callchain, for the filtered out array of
addresses and for the array of symbols that comes along.

Instead, feed the callchains through a linked list with persistent
allocations. It brings several pros like:

- Merge the 1st and 2nd iterations in one. That was possible before
but in a way that would involve allocating an array slightly taller
than necessary because we don't know in advance the number of context
boundaries to filter out.

- Much lesser allocations/deallocations. The linked list keeps
persistent empty entries for the next usages and is extendable at
will.

- Makes it easier for multiple sources of callchains to feed a
stacktrace together. This is deemed to pave the way for cfi based
callchains wherein traditional frame pointer based kernel
stacktraces will precede cfi based user ones, producing an overall
callchain which size is hardly predictable. This requirement
makes the static array obsolete and makes a linked list based
iterator a much more flexible fit.

Basic testing on a big perf file containing callchains (~ 176 MB)
has shown a throughput gain of about 11% with perf report.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294977121-5700-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used in the upcoming 'perf test' entry for the evlist mmap
routines.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adopting the new model used in 'perf record', where we don't have a map
per thread per cpu, instead we have an mmap per cpu, established on the
first fd for that cpu and ask the kernel using the
PERF_EVENT_IOC_SET_OUTPUT ioctl to send events for the other fds on that
cpu for the one with the mmap.

The methods moved from perf_evsel to perf_evlist, but for easing review
they were modified in place, in evsel.c, the next patch will move the
migrated methods to evlist.c.

With this 'perf top' now uses the same mmap model used by 'perf record'
and the next patches will make 'perf record' use these new routines,
establishing a common codebase for both tools.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Out of the code in 'perf top'. Record is next in line.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As this is a per-cpu attribute, we can't set it up in advance and use it
for all the calls.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf_evsel__open now have an extra boolean argument specifying if
event grouping is desired.

The first file descriptor created on a CPU becomes the group leader.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allocating just the space needed for nr_cpus * nr_threads * nr_evsels,
not the MAX_NR_CPUS and counters.

LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Killing two more perf wide global variables: nr_counters and evsel_list
as a list_head.

There are more operations that will need more fields in perf_evlist,
like the pollfd for polling all the fds in a list of evsel instances.

Use option->value to pass the evsel_list to parse_{events,filters}.

LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's enough to include the local "debug.h" file to trigger it.

man time reveals this is already declared in glibc:

time - get time in seconds
-> rename the variable.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: arjan@infradead.org
LPU-Reference: <1295620209-13859-2-git-send-email-trenn@suse.de>
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

[acme@localhost linux]$ make O=~acme/git/build/perf -C tools/perf
make: Entering directory `/home/acme/git/linux/tools/perf'
Makefile:526: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev
Makefile:582: newt not found, disables TUI support. Please install newt-devel or libnewt-dev
    CC /home/acme/git/build/perf/builtin-annotate.o
In file included from builtin-annotate.c:23:
util/parse-events.h:26: warning: declaration of 'evsel_list' shadows a global declaration
util/parse-events.h:12: warning: shadowed declaration is here
make: *** [/home/acme/git/build/perf/builtin-annotate.o] Error 1
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@localhost linux]$ gcc --version | head -1
gcc (GCC) 3.4.6 20060404 (Red Hat 3.4.6-11)
[acme@localhost linux]$

Fix it by renaming the parameter to evlist.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We need the definiton for __always_inline in bitops.h to fix the build
on distros where it isn't available or compiler.h doesn't get included
indirectly.

One of the fixes needed to build perf on RHEL4 systems, for instance.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using %L[uxd] has issues in some architectures, like on ppc64.  Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.

Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: NDenis Kirjanov <dkirjanov@kernel.org>
Tested-by: NDenis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In ARM's Thumb mode the bottom bit of the symbol address is set to mark
the function as Thumb; the instructions are in reality 2 or 4 byte on 2
byte alignments, and when the +1 address is used in annotate it causes
objdump to disassemble invalid instructions.

The patch removes that bottom bit during symbol loading.

Many thinks to Dave Martin for comments on an initial version of the
patch.

(For reference this corresponds to this bug
https://bugs.launchpad.net/linux-linaro/+bug/677547 )

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <20110121163922.GA31398@davesworkthinkpad>
Signed-off-by: NDr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It was broken by f006d25a that passed just the event name, not the complete
sys:event that it expected to open the /sys/.../sys/sys:event/id file to get
the id.

Fix it by moving it to after parse_events in cmd_record, as at that point
we can just traverse the evsel_list and use evsel->attr.config +
event_name(evsel) instead of re-opening the /id file.
Reported-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20110117202801.GG2085@ghostprotocols.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It wasn't accounting the ':' when consuming bytes in the the event
selector string, so parse_events() would fail in this test:

                if (!(*str == 0 || *str == ',' || isspace(*str)))
                        return -1;

as *str would be pointing to '*', the last character in the '-e' arg in:

$ perf record -q -a -D -e sched:sched_* | perf script -i - -s perf-script.py

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In this if statement:

        if (head + event->header.size >= mmap_size) {
                if (mmaps[map_idx]) {
                        munmap(mmaps[map_idx], mmap_size);
                        mmaps[map_idx] = NULL;
                }

                page_offset = page_size * (head / page_size);
                file_offset += page_offset;
                head -= page_offset;
                goto remap;
        }

With, for instance, these values:

head=2992
event->header.size=48
mmap_size=3040

We end up endlessly looping back to remap. Off by one.

Problem introduced in 55b4462.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: NIngo Molnar <mingo@elte.hu>
Reported-by: NDavid Ahern <daahern@cisco.com>
Bisected-by: NDavid Ahern <daahern@cisco.com>
Tested-by: NDavid Ahern <daahern@cisco.com>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

And a test for it:

[acme@felicio linux]$ perf test
 1: vmlinux symtab matches kallsyms: Ok
 2: detect open syscall event: Ok
 3: detect open syscall event on all cpus: Ok
[acme@felicio linux]$

Translating C the test does:

1. generates different number of open syscalls on each CPU
   by using sched_setaffinity
2. Verifies that the expected number of events is generated
   on each CPU

It works as expected.

LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.

For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I found when specifying all tracepoints with -e to one of subcommand,
such as 'stat', the program will trigger a buffer overflow error, like
this:

*** buffer overflow detected ***: ./perf terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7]
....

The tracepoints are separated by comma, something like this:

$ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`

The root reason of this problem is that store_event_type() is called for all
events, and will overflow the 'filename' at:

    strncat(filename, orgname, strlen(orgname));

This patch fixes it by calling store_event_type() only when the event name has
been found.

LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com>
Signed-off-by: NHan Pingtian <phan@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just like we do at __perf_session__process_events

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes the usage of the perf_event.h header file
between command modules and the supporting code in util.

It is necessary to ensure that ALL files use the SAME
perf_event.h header from the kernel source tree.

There were a couple of #include <linux/perf_event.h> mixed
with #include "../../perf_event.h".

This caused issues on some distros because of mismatch
in the layout of struct perf_event_attr. That eventually
led perf stat to segfault.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

builtin-timechart must only pass -e power:xy events if they are supported by
the running kernel, otherwise try to fetch the old power:power{start,end}
events.

For this I added the tiny helper function:

   int is_valid_tracepoint(const char *event_string)

to parse-events.[hc], which could be more generic as an interface and support
hardware/software/... events, not only tracepoints, but someone else could
extend that if needed...
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NJean Pihet <j-pihet@ti.com>
LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>