- 14 2月, 2018 11 次提交
-
-
由 Arnd Bergmann 提交于
Building with link time optimizations produces a false-positive section mismatch warning: WARNING: vmlinux.o(.data+0xf7e8): Section mismatch in reference from the variable driver_template.lto_priv.6914 to the function .init.text:NCR53c406a_detect() The variable driver_template.lto_priv.6914 references the function __init NCR53c406a_detect() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console The ->detect callback is always entered from the init_this_scsi_driver() init function, but apparently LTO turns the optimized direct function call into an indirect call through a non-__initdata pointer. All drivers using init_this_scsi_driver() are for ancient hardware, and most don't mark the detect() callback as __init(), so I'm just removing the annotation here to kill off the warning instead of doing a larger rework. [mkp: typo] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Raghava Aditya Renukunta 提交于
During sync command processing, if legacy INTx status indicates command is not completed, sample the MSIx register and check if it indicates command completion, set controller MSIx enabled flag. Signed-off-by: NPrasad B Munirathnam <prasad.munirathnam@microsemi.com> Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: NDave Carroll <david.carroll@microsemi.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Raghava Aditya Renukunta 提交于
Preserve the current MSIX mode value in the OMR before rewriting the OMR to initiate the IOP or Soft Reset. Signed-off-by: NPrasad B Munirathnam <prasad.munirathnam@microsemi.com> Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: NDave Carroll <david.carroll@microsemi.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Raghava Aditya Renukunta 提交于
IOP_RESET takes a long time to complete. If controller is in a state where we can bring it back with init struct, send a DropIO sync command instead. - If controller is faulted perform standard IOP_RESET in aac_srcv_init. - If controller is not faulted get adapter properties and extended properties. - Update the sa_firmware variable and determine if DropIO request is supported. - Issue DropIO request, and get the number of outstanding commands. - If all commands are complete with success (CT_OK), consider IOP_RESET is complete. - If any commands timeout, Perform the IOP_RESET. Signed-off-by: NPrasad B Munirathnam <prasad.munirathnam@microsemi.com> Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: NDave Carroll <david.carroll@microsemi.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Arnd Bergmann 提交于
gcc-8 warns during link-time optimization that the strncpy() call passes the size of the source buffer rather than the destination: drivers/scsi/qedf/qedf_dbg.c: In function 'qedf_uevent_emit': include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=] This changes it to strscpy() with the correct length, guaranteeing a properly nul-terminated string of the right size. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NChad Dupuis <chad.dupuis@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Arnd Bergmann 提交于
The prototype for qedf_dbg_fops/qedf_debugfs_ops doesn't match the definition, which causes the final link to fail with link-time optimizations: drivers/scsi/qedf/qedf_main.c:34: error: type of 'qedf_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch] extern struct file_operations qedf_dbg_fops; drivers/scsi/qedf/qedf_debugfs.c:443: note: 'qedf_dbg_fops' was previously declared here const struct file_operations qedf_dbg_fops[] = { drivers/scsi/qedf/qedf_main.c:33: error: type of 'qedf_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch] extern struct qedf_debugfs_ops qedf_debugfs_ops; drivers/scsi/qedf/qedf_debugfs.c:102: note: 'qedf_debugfs_ops' was previously declared here struct qedf_debugfs_ops qedf_debugfs_ops[] = { This corrects the prototype and moves it into a shared header file where it belongs. The file operations can also be marked 'const' like the qedf_debugfs_ops. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NChad Dupuis <chad.dupuis@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Colin Ian King 提交于
Pointer disc is being intializated a value that is never read and then re-assigned the same value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/scsi/libfc/fc_disc.c:734:18: warning: Value stored to 'disc' during its initialization is never read Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NJohannes Thumshirn <jth@kernel.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Colin Ian King 提交于
Pointer fcport is initialized with a value that is never read, it is re-assigned a new value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/scsi/qedf/qedf_io.c:920:21: warning: Value stored to 'fcport' during its initialization is never read Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NChad Dupuis <chad.dupuis@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Arnd Bergmann 提交于
When link-time optimizations are enabled, qedi fails to build because of mismatched prototypes: drivers/scsi/qedi/qedi_gbl.h:27:37: error: type of 'qedi_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch] extern const struct file_operations qedi_dbg_fops; ^ drivers/scsi/qedi/qedi_debugfs.c:239:30: note: 'qedi_dbg_fops' was previously declared here const struct file_operations qedi_dbg_fops[] = { ^ drivers/scsi/qedi/qedi_gbl.h:26:32: error: type of 'qedi_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch] extern struct qedi_debugfs_ops qedi_debugfs_ops; ^ drivers/scsi/qedi/qedi_debugfs.c:102:25: note: 'qedi_debugfs_ops' was previously declared here struct qedi_debugfs_ops qedi_debugfs_ops[] = { This changes the declaration to match the definition, and adapts the users as necessary. Since both array can be constant here, I'm adding the 'const' everywhere for consistency. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NManish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Laurence Oberman 提交于
This patch adds two new parameters to the scsi_debug driver. During various fault injection scenarios it would be useful to be able to pick a specific starting sector and number of follow on sectors where a MEDIUM ERROR for reads would be returned against a scsi-debug device. Right now this only works against sector 0x1234 and OPT_MEDIUM_ERR_NUM follow on sectors. However during testing of md-raid and other scenarios I wanted more flexibility. The idea is add 2 new parameters: medium_error_start medium_error_count If medium_error_start is set then we don't use the default of OPT_MEDIUM_ERR_ADDR, but use that set value. If medium_error_count is set we use that value otherwise default to OPT_MEDIUM_ERR_NUM. Signed-off-by: NLaurence Oberman <loberman@redhat.com> Acked-by: NDouglas Gilbert <dgilbert@interlog.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
Since commit 64d513ac ("scsi: use host wide tags by default") all SCSI requests have a tag, whether or not scsi-mq is enabled. Additionally, it is safe to use blk_mq_unique_tag() and blk_mq_unique_tag_to_hwq() for legacy SCSI queues. Since this means that the sdebug_mq_active variable is superfluous, remove it. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Acked-by: NDouglas Gilbert <dgilbert@interlog.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 13 2月, 2018 25 次提交
-
-
由 Hannes Reinecke 提交于
Not a real RAID level, but some HBAs support JBOD in addition to the 'classical' RAID levels. Signed-off-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
Bring the kernel-doc headers in sync with the function argument lists. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
This patch does not change any functionality but slightly reduces the size of the compiled kernel module. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
Remove a few preprocessor macros that are not used anywhere. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
Remove a few preprocessor macros that are not used anywhere. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
Using %p instead of %lx to print a pointer allows to remove a cast. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Updated Copyright in files updated 11.4.0.7 Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Update the driver version to 11.4.0.7 Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
In a test that is doing large numbers of cable swaps on the target, the nvme controllers wouldn't reconnect. During the cable swaps, the targets n_port_id would change. This information was passed to the nvme-fc transport, in the new remoteport registration. However, the nvme-fc transport didn't update the n_port_id value in the remoteport struct when it reused an existing structure. Later, when a new association was attempted on the remoteport, the driver's NVME LS routine would use the stale n_port_id from the remoteport struct to address the LS. As the device is no longer at that address, the LS would go into never never land. Separately, the nvme-fc transport will be corrected to update the n_port_id value on a re-registration. However, for now, there's no reason to use the transports values. The private pointer points to the drivers node structure and the node structure is up to date. Therefore, revise the LS routine to use the drivers data structures for the LS. Augmented the debug message for better debugging in the future. Also removed a duplicate if check that seems to have slipped in. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Currently, write underruns (mismatch of amount transferred vs scsi status and its residual) detected by the adapter are not being flagged as an error. Its expected the target controls the data transfer and would appropriately set the RSP values. Only read underruns are treated as errors. Revise the SCSI error handling to treat write underruns as an error as well. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
The driver was inappropriately pulling in the nvme host's nvme.h header. What it really needed was the standard <linux/nvme.h> header. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
When using the special option to suppress the response iu, ensure the adapter fully supports the feature by checking feature flags from the adapter and validating the support when formatting the WQE. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
During SCSI error handling escalation to host reset, the SCSI io routines were moved off the txcmplq, but the individual io's ON_CMPLQ flag wasn't cleared. Thus, a background thread saw the io and attempted to access it as if on the txcmplq. Clear the flag upon removal. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Revise the NVME PRLI to indicate CONF support. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
The driver ignored checks on whether the link should be kept administratively down after a link bounce. Correct the checks. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
During link bounce testing in a point-to-point topology, the host may enter a soft lockup on the lpfc_worker thread: Call Trace: lpfc_work_done+0x1f3/0x1390 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 The driver was simultaneously setting a combination of flags that caused lpfc_do_work()to effectively spin between slow path work and new event data, causing the lockup. Ensure in the typical wq completions, that new event data flags are set if the slow path flag is running. The slow path will eventually reschedule the wq handling. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Make the attribute writeable. Remove the ramp up to logic as its unnecessary, simply set depth. Add debug message if depth changed, possibly reducing limit, yet our outstanding count has yet to catch up with it. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
When nvme target deferred receive logic waits for exchange resources, the corresponding receive buffer is not replenished with the hardware. This can result in a lack of asynchronous receive buffer resources in the hardware, resulting in a "2885 Port Status Event: ... error 1=0x52004a01 ..." message. Correct by replenishing the buffer whenenver the deferred logic kicks in. Update corresponding debug messages and statistics as well. [mkp: applied by hand] Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
A stress test repeatedly resetting the adapter while performing io would eventually report I/O failures and missing nvme namespaces. The driver was setting the nvmefc_fcp_req->private pointer to NULL during the IO completion routine before upcalling done(). If the transport was also running an abort for that IO, the driver would fail the abort with message 6140. Failing the abort is not allowed by the nvme-fc transport, as it mandates that the io must be returned back to the transport. As that does not happen, the transport controller delete has an outstanding reference and can't complete teardown. The NULL-ing of the private pointer should be done only when the io is considered complete. It's complete when the adapter returns the exchange with the "exchange busy" flag clear. Move the NULL'ing of the structure to the done case. This leaves the io contexts set while it is busy and until the subsequent XRI_ABORTED completion which returns the exchange is received. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
The lpfc driver does not discover a target when the topology changes from switched-fabric to direct-connect. The target rejects the PRLI from the initiator in direct-connect as the driver is using the old S_ID from the switched topology. The driver was inappropriately clearing the VP bit to register the VPI, which is what is associated with the S_ID. Fix by leaving the VP bit set (it was set earlier) and as the VFI is being re-registered, set the UPDT bit. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
I/O conditions on the nvme target may have the driver submitting to a full hardware wq. The hardware wq is a shared resource among all nvme controllers. When the driver hit a full wq, it failed the io posting back to the nvme-fc transport, which then escalated it into errors. Correct by maintaining a sideband queue within the driver that is added to when the WQ full condition is hit, and drained from as soon as new WQ space opens up. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Existing code was using the wrong field for the completion status when comparing whether to increment abort statistics Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Ensure nvme localports/targetports are torn down before dismantling the adapter sli interface on driver detachment. This aids leaving interfaces live while nvme may be making callbacks to abort it. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Increased CQ and WQ sizes for SCSI FCP, matching those used for NVMe development. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
The driver controls when the hardware sends completions that communicate consumption of elements from the WQ. This is done by setting a WQEC bit on a WQE. The current driver sets it on every Nth WQE posting. However, the driver isn't clearing the bit if the WQE is reused. Thus, if the queue depth isn't evenly divisible by N, with enough time, it can be set on every element, creating a lot of overhead and risking CQ full conditions. Correct by clearing the bit when not setting it on an Nth element. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 12 2月, 2018 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-