It is now possible to assign options to AS and CC
on the command line - which is only used for built-in code.

{A,C}FLAGS_KERNEL was used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC without overriding
the original value.

Introduce a new set of variables KBUILD_{A,C}FLAGS_KERNEL
that is used by arch specific files and free up
{A,C}FLAGS_KERNEL so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

It is now possible to assign options to AS, CC and LD
on the command line - which is only used when building modules.

{A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC, LD when building modules
without overriding the original value.

Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE
that is used by arch specific files and free up
{A,C,LD}FLAGS_MODULE so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.

Note: Previously we had a MODFLAGS variable for both
AS and CC. But in favour of consistency this was dropped.
So in some cases arch Makefile has one assignmnet replaced by
two assignmnets.

Note2: MODFLAGS was not documented and is dropped
without any notice. I do not expect much/any breakage
from this.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Newer gcc has a -femit-struct-debug-baseonly option that dramatically
reduces the size of object files with debug info. What it does
is to only emit type information for structures when the structures
are defined in the same file or in a header file.

This means the type information for most headers are not included.
This is not good when the type information is actually
needed (e.g. with kgdb or systemtap)

But often kernel hackers only care about line numbers and don't
need all the type information anyways. In this case setting
the option can be a big win:

A build dir for a specific x86-64 configuration with gcc 4.5
shrunk from 2.3G to 1.2G. The compilation was also nearly a minute
faster.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
[mmarek: reformatted help text]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

After commit 85a256d8, 'make kernelrelease'
doesn't show the correct full kernel version. This patch fixes it,
'make kernelrelease' will show the same version name with the one
you finally get.

Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAmerigo Wang <amwang@redhat.com>
[mmarek: merged with 09155120 and added dependency on
include/config/kernel.release]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Now that we run scripts/setlocalversion during every build, it makes
sense to move all the localversion logic there. This cleans up the
toplevel Makefile and also makes sure that the script is called only
once in 'make prepare' (previously, it would be called every time due to
a variable expansion in an ifneq statement). No user-visible change is
intended, unless one runs the setlocalversion script directly.
Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

I'm looking Makefile in the -mm branch (dated 2010-04-28-16-53) and
seeing what looks like a bug in the checking of scm-identifier.  The
"ifneq ($scm-identifier)" seems to always execute "ifeq
($(LOCALVERSION,)) ...".  This patch fixes the checking of
scm-identifier.
Signed-off-by: NGreg Thelen <gthelen@google.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The previous approach didn't work if one did
make modules && make modules_install
Add modules.builtin as dependency of _modinst_, which is the target that
actually needs the file.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Only regenerate it if the configuration has changed. Also, do this after
the modules build to fix errors with some weird Makefiles that are
generated during build.
Reported-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Better dwarf2 unwind information is a good thing, it allows better
debugging with kgdb and crash and helps systemtap.

Commit 00308649 ("Build with
-fno-dwarf2-cfi-asm") disabled some CFI information globally to work
around a module loader bug on powerpc.

But this disables the better unwind tables for all architectures, not just
powerpc.  Move the workaround to powerpc and also add a suitable comment
that's it really a workaround.

This improves dwarf2 unwind tables on x86 at least.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The LOCALVERSION= string passed to "make" will now always be appended to
the kernel version after CONFIG_LOCALVERSION, if it exists, regardless of
whether CONFIG_LOCALVERSION_AUTO is set or not.  This allows users to
uniquely identify their kernel builds with a string.

If CONFIG_LOCALVERSION_AUTO is enabled, the unique SCM tag reported by
setlocalversion (or .scmversion) is appended to the kernel version, if it
exists.  When CONFIG_LOCALVERSION_AUTO is not enabled, a `+' is appended
to the kernel version to represent that the kernel has been revised since
the last release unless "make LOCALVERSION=" was used to uniquely identify
the build.

The end result is this:

 - when LOCALVERSION= is passed to "make", it is appended to the kernel
   version,

 - when CONFIG_LOCALVERSION_AUTO is enabled, a unique SCM identifier is
   appended if the respository has been revised beyond a tagged commit,
   and

 - when CONFIG_LOCALVERSION_AUTO is disabled, a `+' is appended if the
   repository has been revised beyond a tagged commit and LOCALVERSION=
   was not passed to "make".

Examples:

With CONFIG_LOCALVERSION_AUTO: "make" results in
v2.6.32-rc4-00149-ga3ccf63e.  If there are uncommited changes to the
respository, it results in v2.6.32-rc4-00149-ga3ccf63e-dirty.  If
"make LOCALVERSION=kbuild" were used, it results in
v2.6.32-rc4-kbuild-00149-ga3ccf63e-dirty.

Without CONFIG_LOCALVERSION_AUTO, "make" results in v2.6.32-rc4+
unless the repository is at the Linux v2.6.32-rc4 commit (in which
case the version would be v2.6.32-rc4).  If "make LOCALVERSION=kbuild"
were used, it results in v2.6.32-rc4-kbuild.

Also renames variables such as localver-auto and _localver-auto to more
accurately describe what they represent: localver-extra and
scm-identifier, respectively.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This adds CROSS_COMPILE as a kconfig string so you can store it in
.config.  Then you can use plain "make" in the configured kernel build
directory to do the right cross compilation without setting the
command-line or environment variable every time.

With this, you can set up different build directories for different kernel
configurations, whether native or cross-builds, and then use the simple:

	make -C /build/dir M=module-source-dir

idiom to build modules for any given target kernel, indicating which one
by nothing but the build directory chosen.

I tried a version that defaults the string with env="CROSS_COMPILE" so
that in a "make oldconfig" with CROSS_COMPILE in the environment you can
just hit return to store the way you're building it.  But the kconfig
prompt for strings doesn't give you any way to say you want an empty
string instead of the default, so I punted that.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Setting LC_CTYPE=C breaks localized messages in some setups. With only
LC_COLLATE=C and LC_NUMERIC=C, we get almost all we need, except for not
so defined character classes and tolower()/toupper(). The former is not
a big issue, because we can assume that e.g. [:alpha:] will always
include a-zA-Z and we only ever process ASCII input. The latter seems
only affect arch/sh/tools/gen-mach-types, which we can handle separately.

So after this patch the meaning of ranges like [a-z], the behavior of
sort and join, etc. should be the same everywhere and at the same time
gcc should be able to print localized waring and error messages.
LC_NUMERIC=C might not be necessary, but setting it doesn't hurt.
Reported-by: NSimon Horman <horms@verge.net.au>
Reported-by: NSergei Trofimovich <slyfox@inbox.ru>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Tested-by: NSimon Horman <horms@verge.net.au>
Tested-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Apparently not all versions of glibc and utilities treat an empty
LC_ALL as nonexistent, causing error messages to be garbled.  Instead,
explicitly unexport it from the environment.
Reported-and-tested-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <4B2AC394.4030108@redhat.com>
Cc: Michal Marek <mmarek@sues.cz>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Sam Ravnborg <sam@ravnborg.org>

There are a number of common Unix constructs like character ranges in
grep/sed/awk which don't work as expected with LC_COLLATE set to other
than C.  Similarly, set LC_CTYPE and LC_NUMERIC to C to avoid other
nasty surprises.

In order to make sure these actually take effect we also have to
clear LC_ALL.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: NMichal Marek <mmarek@sues.cz>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NRoland Dreier <rdreier@cisco.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <4B2A1761.4070904@suse.cz>

Fix typo / thinko in commit bc081dd6.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The toplevel Makefile creates the directory if it runs silentoldconfig
automatically, but if run manually, it fails:

  $ make mrproper
  $ make defconfig && make silentoldconfig
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  scripts/kconfig/conf -s arch/x86/Kconfig

  *** Error during update of the kernel configuration.
  ...

Move the mkdir command to the silentoldconfig target to make it work.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Drop Module.markers from cleaning list since marker
is removed.
Signed-off-by: NWenji Huang <wenji.huang@oracle.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Fix up all users of utsrelease.h
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

We no longer use this directory for generated files and
all architectures has moved their header files so no
symlink tricks are needed either.

Drop the symlink and drop the ARCH check.

If we really need to check that the SRCARCH has not changed
when we build a kernel we can add this check back - but then we will
find a more convenient way to store the info.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

No architectures uses include/asm-$ARCH now.
So drop check for location of include files
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

There is no longer any use of the include2/ directory.
The generated files has moved to include/generated.

Drop all references to said directory.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The simplest method was to add an extra asm-offsets.h
file in arch/$ARCH/include/asm that references the generated file.

We can now migrate the architectures one-by-one to reference
the generated file direct - and when done we can delete the
temporary arch/$ARCH/include/asm/asm-offsets.h file.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The namespace used in arch/$ARCH/include is different from
what is used in include/ except for the include/asm directory.

This patch gives the arch/$ARCH/include/asm directory priority
over include/asm.

When we add asm-offsets.h to arch/$ARCH/include/asm/ this
patch makes sure we pick up the arch specific version
and not the one we have in include/asm.

The situation with an asm-offsets.h file located in
both include/asm _and_ arch/$ARCH/include/asm will happen
when we move more files over to include/generated.

This happens because in some cases it is not practical
to rename all users so we simply add a file
in arch/$ARCH/include/asm that includes the generated version.

This is the solution we use for asm-offsets.h as an example.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

If the user has an older version of objcopy, that can not handle
converting local symbols to global and vice versa, then some
functions will not be part of the dynamic function tracer. The current
code in recordmcount.pl will print a warning in this case. Unfortunately,
there exists lots of files that may have this issue with older objcopys
and this will cause a warning for every file compiled with this
issue.

This patch solves this overwhelming output by creating a
.tmp_quiet_recordmcount file on the first instance the warning is
encountered. The warning will not print if this file exists.

The temp file is deleted at the beginning of the compile to ensure that
the warning will happen once again on new compiles (because the issue
is still present).
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now that all host programs use static for all private functions and
forward prototypes for all extern functions, add -Wmissing-prototypes to
HOSTCFLAGS in the hopes of keeping it that way.

All versions of GCC supported by the kernel handle -Wmissing-prototypes.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>