- 20 11月, 2011 14 次提交
-
-
由 Simon Wunderlich 提交于
if hash_add() fails, we should remove the structure to avoid memory leaks. Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
The tt_local_reset_flags() is actually used for one use case only. It is not generalised enough to be used indifferent situations. This patch make it general enough in order to let other code use it whenever a flag set is requested over the whole hash table (passed as parameter). The function is now called tt_set_flags() Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
Several functions in the translation table management code assume that the tt_global_entry and tt_local_entry structures have the same initial fields such as 'addr' and 'hash_entry'. To improve the code readability and to avoid mistakes in later changes, a common substructure that substitute the shared fields has been introduced (struct tt_common_entry). Thanks to this modification, it has also been possible to slightly reduce the code length by merging some functions like compare_ltt/gtt() and tt_local/global_hash_find() Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Marek Lindner 提交于
Reported-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Simon Wunderlich 提交于
The check for new packets in the future used a wrong binary operator, which makes the check expression always true and accepting too many packets. Reported-by: NThomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
Before accessing the TT_RESPONSE packet payload, the node has to ensure that the packet is long enough as it would expect to be. Reported-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
The TT_RESPONSE skb has to be linearised only if the node plans to access the packet payload (so only if the message is directed to that node). In all the other cases the node can avoid this memory operation Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Simon Wunderlich 提交于
When the translation tables (global and local) are written for debugfs, it is not neccesary to allocate a buffer, we can directly use seq_printf() to print them out. This might actually be safer if the table changes between size calculation and traversal, and we can't estimate the required size wrong. Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
There are two reasons for this fix: - the result of choose_orig() and vis_choose() is an index and therefore it can't be negative. Hence it is correct to make the return type unsigned too. - sizeof(int) may not be the same on ALL the architectures. Since we plan to use choose_orig() as DHT hash function, we need to guarantee that, given the same argument, the result is the same. Then it is correct to explicitly express the size of the return type (and the second argument). Since the expected length is currently 4, uint32_t is the most convenient choice. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
get_orig_node() tries to retrieve an orig_node object based on a mac address and creates it if not present. This is not the wanted behaviour in the translation table code as we don't want to create new orig_code objects but expect a NULL pointer if the object does not exist. Reported-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
strict_strto<foo> is obsolete since v3.1-rc8-8466-g14acc55 and should be replaced with kstrto<foo>. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
When deleting the entries, tt_global_del_orig() has to print the message passed as argument instead of a static one. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 08 11月, 2011 1 次提交
-
-
由 Richard Weinberger 提交于
The BKL is gone, these annotations are useless. Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2011 4 次提交
-
-
由 Olof Johansson 提交于
This popped some compiler errors due to mismatched prototypes. Just remove most manual inlines, the compiler should be able to figure out what makes sense to inline and not. net/packet/af_packet.c:252: warning: 'prb_curr_blk_in_use' declared inline after being called net/packet/af_packet.c:252: warning: previous declaration of 'prb_curr_blk_in_use' was here net/packet/af_packet.c:258: warning: 'prb_queue_frozen' declared inline after being called net/packet/af_packet.c:258: warning: previous declaration of 'prb_queue_frozen' was here net/packet/af_packet.c:248: warning: 'packet_previous_frame' declared inline after being called net/packet/af_packet.c:248: warning: previous declaration of 'packet_previous_frame' was here net/packet/af_packet.c:251: warning: 'packet_increment_head' declared inline after being called net/packet/af_packet.c:251: warning: previous declaration of 'packet_increment_head' was here Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Chetan Loke <loke.chetan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
Commit 87fb4b7b (net: more accurate skb truesize) changed the alignment of size. This can cause problems at least on some machines with NFS root: Unhandled fault: alignment exception (0x801) at 0xc183a43a Internal error: : 801 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.1.0-08784-g5eeee4a #733) pc : [<c02fbba0>] lr : [<c02fbb9c>] psr: 60000013 sp : c180fef8 ip : 00000000 fp : c181f580 r10: 00000000 r9 : c044b28c r8 : 00000001 r7 : c183a3a0 r6 : c1835be0 r5 : c183a412 r4 : 000001f2 r3 : 00000000 r2 : 00000000 r1 : ffffffe6 r0 : c183a43a Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: 10004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc180e270) Stack: (0xc180fef8 to 0xc1810000) fee0: 00000024 00000000 ff00: 00000000 c183b9c0 c183b8e0 c044b28c c0507ccc c019dfc4 c180ff2c c0503cf8 ff20: c180ff4c c180ff4c 00000000 c1835420 c182c740 c18349c0 c05233c0 00000000 ff40: 00000000 c00e6bb8 c180e000 00000000 c04dd82c c0507e7c c050cc18 c183b9c0 ff60: c05233c0 00000000 00000000 c01f34f4 c0430d70 c019d364 c04dd898 c04dd898 ff80: c04dd82c c0507e7c c180e000 00000000 c04c584c c01f4918 c04dd898 c04dd82c ffa0: c04ddd28 c180e000 00000000 c0008758 c181fa60 3231d82c 00000037 00000000 ffc0: 00000000 c04dd898 c04dd82c c04ddd28 00000013 00000000 00000000 00000000 ffe0: 00000000 c04b2224 00000000 c04b21a0 c001056c c001056c 00000000 00000000 Function entered at [<c02fbba0>] from [<c019dfc4>] Function entered at [<c019dfc4>] from [<c01f34f4>] Function entered at [<c01f34f4>] from [<c01f4918>] Function entered at [<c01f4918>] from [<c0008758>] Function entered at [<c0008758>] from [<c04b2224>] Function entered at [<c04b2224>] from [<c001056c>] Code: e1a00005 e3a01028 ebfa7cb0 e35a0000 (e5858028) Here PC is at __alloc_skb and &shinfo->dataref is unaligned because skb->end can be unaligned without this patch. As explained by Eric Dumazet <eric.dumazet@gmail.com>, this happens only with SLOB, and not with SLAB or SLUB: * Eric Dumazet <eric.dumazet@gmail.com> [111102 15:56]: > > Your patch is absolutely needed, I completely forgot about SLOB :( > > since, kmalloc(386) on SLOB gives exactly ksize=386 bytes, not nearest > power of two. > > [ 60.305763] malloc(size=385)->ffff880112c11e38 ksize=386 -> nsize=2 > [ 60.305921] malloc(size=385)->ffff88007c92ce28 ksize=386 -> nsize=2 > [ 60.306898] malloc(size=656)->ffff88007c44ad28 ksize=656 -> nsize=272 > [ 60.325385] malloc(size=656)->ffff88007c575868 ksize=656 -> nsize=272 > [ 60.325531] malloc(size=656)->ffff88011c777230 ksize=656 -> nsize=272 > [ 60.325701] malloc(size=656)->ffff880114011008 ksize=656 -> nsize=272 > [ 60.346716] malloc(size=385)->ffff880114142008 ksize=386 -> nsize=2 > [ 60.346900] malloc(size=385)->ffff88011c777690 ksize=386 -> nsize=2 Signed-off-by: NTony Lindgren <tony@atomide.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Simon Kirby reported lockdep warnings and following messages : [104661.897577] huh, entered softirq 3 NET_RX ffffffff81613740 preempt_count 00000101, exited with 00000102? [104661.923653] huh, entered softirq 3 NET_RX ffffffff81613740 preempt_count 00000101, exited with 00000102? Problem comes from commit 0e734419 (ipv4: Use inet_csk_route_child_sock() in DCCP and TCP.) If inet_csk_route_child_sock() returns NULL, we should release socket lock before freeing it. Another lock imbalance exists if __inet_inherit_port() returns an error since commit 093d2823 ( tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()) a backport is also needed for >= 2.6.37 kernels. Reported-by: NSimon Kirby <sim@hostway.ca> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Tested-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Balazs Scheidler <bazsi@balabit.hu> CC: KOVACS Krisztian <hidden@balabit.hu> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NSimon Kirby <sim@hostway.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Misha Labjuk reported panics occurring in l2tp_recv_dequeue() If we release reorder_q.lock, we must not keep a dangling pointer (tmp), since another thread could manipulate reorder_q. Instead we must restart the scan at beginning of list. Reported-by: NMisha Labjuk <spiked.yar@gmail.com> Tested-by: NMisha Labjuk <spiked.yar@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 11月, 2011 4 次提交
-
-
由 Johannes Berg 提交于
Only AID values 1-2007 are valid, but some APs have been found to send random bogus values, in the reported case an AP that was sending the AID field value 0xffff, an AID of 0x3fff (16383). There isn't much we can do but disable powersave since there's no way it can work properly in this case. Cc: stable@vger.kernel.org Reported-by: NBill C Riemers <briemers@redhat.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
We need to verify whether the command is successful before allocating the station entry to avoid extra processing. This also fixes a memory leak on the error path. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eliad Peller 提交于
When going back on-channel, we should reconfigure the hw iff the hardware is not already configured to the operational channel. Signed-off-by: NEliad Peller <eliad@wizery.com> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eliad Peller 提交于
The offchannel code is currently broken - we should remain_off_channel if the work was started, and the work's channel and channel_type are the same as local->tmp_channel and local->tmp_channel_type. However, if wk->chan_type and local->tmp_channel_type coexist (e.g. have the same channel type), we won't remain_off_channel. This behavior was introduced by commit da2fd1f0 ("mac80211: Allow work items to use existing channel type.") Tested-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 02 11月, 2011 5 次提交
-
-
由 Eric Dumazet 提交于
udp_queue_rcv_skb() has a possible race in encap_rcv handling, since this pointer can be changed anytime. We should use ACCESS_ONCE() to close the race. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
commit cb101ed2 in 3.0 introduced a bug in x25_recvmsg() When passed bogus junk from userspace, x25->neighbour can be NULL, as shown in this oops.. BUG: unable to handle kernel NULL pointer dereference at 000000000000001c IP: [<ffffffffa05482bd>] x25_recvmsg+0x4d/0x280 [x25] PGD 1015f3067 PUD 105072067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 27928, comm: iknowthis Not tainted 3.1.0+ #2 Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H RIP: 0010:[<ffffffffa05482bd>] [<ffffffffa05482bd>] x25_recvmsg+0x4d/0x280 [x25] RSP: 0018:ffff88010c0b7cc8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88010c0b7d78 RCX: 0000000000000c02 RDX: ffff88010c0b7d78 RSI: ffff88011c93dc00 RDI: ffff880103f667b0 RBP: ffff88010c0b7d18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880103f667b0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f479ce7f700(0000) GS:ffff88012a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000001c CR3: 000000010529e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process iknowthis (pid: 27928, threadinfo ffff88010c0b6000, task ffff880103faa4f0) Stack: 0000000000000c02 0000000000000c02 ffff88010c0b7d18 ffffff958153cb37 ffffffff8153cb60 0000000000000c02 ffff88011c93dc00 0000000000000000 0000000000000c02 ffff88010c0b7e10 ffff88010c0b7de8 ffffffff815372c2 Call Trace: [<ffffffff8153cb60>] ? sock_update_classid+0xb0/0x180 [<ffffffff815372c2>] sock_aio_read.part.10+0x142/0x150 [<ffffffff812d6752>] ? inode_has_perm+0x62/0xa0 [<ffffffff815372fd>] sock_aio_read+0x2d/0x40 [<ffffffff811b05e2>] do_sync_read+0xd2/0x110 [<ffffffff812d3796>] ? security_file_permission+0x96/0xb0 [<ffffffff811b0a91>] ? rw_verify_area+0x61/0x100 [<ffffffff811b103d>] vfs_read+0x16d/0x180 [<ffffffff811b109d>] sys_read+0x4d/0x90 [<ffffffff81657282>] system_call_fastpath+0x16/0x1b Code: 8b 66 20 4c 8b 32 48 89 d3 48 89 4d b8 45 89 c7 c7 45 cc 95 ff ff ff 4d 85 e4 0f 84 ed 01 00 00 49 8b 84 24 18 05 00 00 4c 89 e7 78 1c 01 45 19 ed 31 f6 e8 d5 37 ff e0 41 0f b6 44 24 0e 41 Signed-off-by: NDave Jones <davej@redhat.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arjan van de Ven 提交于
the tcp and udp code creates a set of struct file_operations at runtime while it can also be done at compile time, with the added benefit of then having these file operations be const. the trickiest part was to get the "THIS_MODULE" reference right; the naive method of declaring a struct in the place of registration would not work for this reason. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthijs Kooijman 提交于
When (de)configuring a vlan interface, the IFF_ALLMULTI ans IFF_PROMISC flags are cleared or set on the underlying interface. So, if these flags are changed on a vlan interface that is not up, the flags underlying interface might be set or cleared twice. Only propagating flag changes when a device is up makes sure this does not happen. It also makes sure that an underlying device is not set to promiscuous or allmulti mode for a vlan device that is down. Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Whatever situations make this state legitimate when SMP also would be legitimate when !SMP and f.e. preemption is enabled. This is dubious enough that we should just delete it entirely. If we want to add debugging for neigh timer races, better more thorough mechanisms are needed. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2011 12 次提交
-
-
由 Florian Westphal 提交于
commit f1585086 (netfilter: nfnetlink_queue: return error number to caller) erronously assigns the return value of nf_queue() to the "ret" value. This can cause bogus return values if we encounter QUEUE verdict when bypassing is enabled, the listener does not exist and the next hook returns NF_STOLEN. In this case nf_hook_slow returned -ESRCH instead of 0. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
Several callers (h323 conntrack, xt_addrtype) assume that the returned **dst only needs to be released if the function returns 0. This is true for the ipv4 implementation, but not for the ipv6 one. Instead of changing the users, change the ipv6 implementation to behave like the ipv4 version by only providing the dst_entry result in the success case. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Krzysztof Wilczynski 提交于
This is to address the following warning during compilation time: net/netfilter/ipvs/ip_vs_core.c: In function ‘ip_vs_leave’: net/netfilter/ipvs/ip_vs_core.c:532: warning: unused variable ‘cs’ This variable is indeed no longer in use. Signed-off-by: NKrzysztof Wilczynski <krzysztof.wilczynski@linux.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
由 Joe Perches 提交于
Site specific OOM messages are duplications of a generic MM out of memory message and aren't really useful, so just delete them. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Simon Horman 提交于
ipvs is not used in ip_vs_genl_set_cmd() or ip_vs_genl_get_cmd() Acked-by: NJulian Anastasov <ja@ssi.bg> Acked-by Hans Schillstrom <hans@schillstrom.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Simon Horman 提交于
Acked-by: NJulian Anastasov <ja@ssi.bg> Acked-by Hans Schillstrom <hans@schillstrom.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Simon Horman 提交于
Acked-by: NJulian Anastasov <ja@ssi.bg> Acked-by Hans Schillstrom <hans@schillstrom.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Krzysztof Wilczynski 提交于
This is to expose "ports" parameter via sysfs so it can be read at any time in order to determine what port or ports were passed to the module at the point when it was loaded. Signed-off-by: NKrzysztof Wilczynski <krzysztof.wilczynski@linux.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Joe Perches 提交于
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: NJoe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
To fix this, once the implicit presence of module.h is removed: net/bridge/br_stp_if.c: In function ‘br_stp_start’: net/bridge/br_stp_if.c:131: error: implicit declaration of function ‘call_usermodehelper’ net/bridge/br_stp_if.c:131: error: ‘UMH_WAIT_PROC’ undeclared (first use in this function) Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
These files were getting access to these two via the implicit presence of module.h everywhere. They aren't modules, so they don't need the full module.h inclusion though. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-