- 27 5月, 2006 17 次提交
-
-
由 Auke Kok 提交于
Someone was waaay too aggressive and removed e1000's reboot notifier instead of porting it to the new way of the shutdown handler. This change broke wake on lan. Add the shutdown handler back in using the same method as e100 uses. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> (cherry picked from c653e635 commit)
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: dev.c comment fixes [IPV6] ROUTE: Don't try less preferred routes for on-link routes. [IRDA]: *_DONGLE should depend on IRTTY_SIR [MAINTAINERS]: Add entry for netem
-
由 Stephen Hemminger 提交于
Noticed that dev_alloc_name() comment was incorrect, and more spellung errors. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
In addition to the real on-link routes, NONEXTHOP routes should be considered on-link. Problem reported by Meelis Roos <mroos@linux.ee>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix section mismatch warnings: WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:arlan_probe from .text between 'init_module' (at offset 0x3526) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:init_arlan_proc from .text between 'init_module' (at offset 0x3539) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .exit.text:cleanup_arlan_proc from .text between 'cleanup_module' (at offset 0x356c) and 'arlan_diagnostic_info_string' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
Fix section mismatch warning: WARNING: drivers/net/wireless/wavelan.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x371e) and 'cleanup_module' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kylene Jo Hall 提交于
The TPM chip on the ThinkPad T60 and Z60 machines is returning 0xFFFF for the vendor ID which is a check the driver made to double check it was actually talking to the memory mapped space of a TPM. This patch removes the check since it isn't absolutely necessary and was causing device discovery to fail on these machines. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
WARNING: drivers/i2c/busses/scx200_acb.o - Section mismatch: reference to .init.text: from .text after 'scx200_add_cs553x' (at offset 0x528) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Dooks 提交于
Fix compile bug with the S3C24XX SPI driver when CONFIG_PM is set. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Berg 提交于
For a very long time, echoing 'standby' or 'mem' into /sys/power/state has killed the machine on powerpc. This patch fixes that. This patch adds the .valid callback to pm_ops on PowerMac so that only the suspend to disk state can be entered. Note that just returning 0 would suffice since the upper layers don't pass PM_SUSPEND_DISK down, but we handle it there regardless just in case that changes. Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Florin Malita 提交于
If affs_bread() fails, the exit path calls mark_buffer_dirty_inode() with a NULL argument. Coverity CID: 312. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
This improves accuracy of the touchscreen and hwmon sensor readings, addressing an issue noted by Imre Deak: there's an extra bit written before the sample (12 bits) gets written out. It also catches up to various comments, and makes the /proc/interrupts entry sensible again. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Imre Deak <imre.deak@nokia.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
Some driver wants to use CMSPAR, but it was missing on alpha and powerpc. This adds it, with the same value as every other architecture uses. (akpm: fixes the build of an upcoming gregkh USB patch) Signed-off-by: NPaul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Neil Brown 提交于
otherwise we get nasty messages about locks not being released. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Fix posting lists of 256 receive requests to SRQ for Tavor
-
- 26 5月, 2006 3 次提交
-
-
由 Samuel Ortiz 提交于
If a SIR dongle is built in the kernel while IRTTY_SIR is built as a module, kernel compilation will fail. Thus, the SIR dongle config should depend on the IRTTY_SIR. Closes kernel bug# 6512 (http://bugzilla.kernel.org/show_bug.cgi?id=6512) Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
It gets enough reports, that there ought to be a MAINTAINER entry. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Schwidefsky 提交于
Add missing parentheses for type cast to u64. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 5月, 2006 3 次提交
-
-
由 Linus Torvalds 提交于
-
由 Jean Delvare 提交于
Mixing "depends on I2C" and "select I2C" within the media subsystem leads to the following problem: Warning! Found recursive dependency: I2C DVB_BUDGET DVB_BUDGET_PATCH DVB_AV7110 VIDEO_SAA7146_VV VIDEO_SAA7146 I2C Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NManu Abraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael S. Tsirkin 提交于
If we post a list of length exactly a multiple of 256, nreq in doorbell gets set to 256 which is wrong: it should be encoded by 0. This is because we only zero it out on the next WR, which may not be there. The solution is to ring the doorbell after posting a WQE, not before posting the next one. This is the same bug that we just fixed for QPs with non-shared RQ. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 24 5月, 2006 17 次提交
-
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: deref correct pointer when using kernel SMA IB/ipath: fix null deref during rdma ops IB/ipath: register as IB device owner IB/ipath: enable PE800 receive interrupts on user ports IB/ipath: enable GPIO interrupt on HT-460 IB/ipath: fix NULL dereference during cleanup IB/ipath: replace uses of LIST_POISON IB/ipath: fix reporting of driver version to userspace IB/ipath: don't modify QP if changes fail IB/ipath: fix spinlock recursion bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: Fix multiple errors in metapage_releasepage
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: add pio flush for via atapi (was: Re: TR: ASUS A8V Deluxe, x86_64)
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] sky2: fix jumbo packet support
-
由 Pierre Ossman 提交于
md->disk was being used in a debug message before it was allocated. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Kleikamp 提交于
It looks like metapage_releasepage was making in invalid assumption that the releasepage method would not be called on a dirty page. Instead of issuing a warning and releasing the metapage, it should return 0, indicating that the private data for the page cannot be released. I also realized that metapage_releasepage had the return code all wrong. If it is successful in releasing the private data, it should return 1, otherwise it needs to return 0. Lastly, there is no need to call wait_on_page_writeback, since try_to_release_page will not call us with a page in writback state. Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
-
由 Albert Lee 提交于
Backport the "pio flush" from the libata major update to 2.6.17 for via atapi. Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
The truncate threshold calculation to prevent receiver from getting stuck was incorrect, and it didn't take into account the upper limit on bits in the register so the jumbo packet support was broken. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Bridge will OOPS on removal if other application has the SAP open. The bridge SAP might be shared with other usages, so need to do reference counting on module removal rather than explicit close/delete. Since packet might arrive after or during removal, need to clear the receive function handle, so LLC only hands it to user (if any). Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Wright 提交于
If kmalloc fails, error path leaks data allocated from asn1_oid_decode(). Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When parsing unknown sequence extensions the "son"-pointer points behind the last known extension for this type, don't try to interpret it. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The condition "> H323_ERROR_STOP" can never be true since H323_ERROR_STOP is positive and is the highest possible return code, while real errors are negative, fix the checks. Also only abort on real errors in some spots that were just interpreting any return value != 0 as error. Fixes crashes caused by use of stale data after a parsing error occured: BUG: unable to handle kernel paging request at virtual address bfffffff printing eip: c01aa0f8 *pde = 1a801067 *pte = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: ip_nat_h323 ip_conntrack_h323 nfsd exportfs sch_sfq sch_red cls_fw sch_hfsc xt_length ipt_owner xt_MARK iptable_mangle nfs lockd sunrpc pppoe pppoxx CPU: 0 EIP: 0060:[<c01aa0f8>] Not tainted VLI EFLAGS: 00210646 (2.6.17-rc4 #8) EIP is at memmove+0x19/0x22 eax: d77264e9 ebx: d77264e9 ecx: e88d9b17 edx: d77264e9 esi: bfffffff edi: bfffffff ebp: de6a7680 esp: c0349db8 ds: 007b es: 007b ss: 0068 Process asterisk (pid: 3765, threadinfo=c0349000 task=da068540) Stack: <0>00000006 c0349e5e d77264e3 e09a2b4e e09a38a0 d7726052 d7726124 00000491 00000006 00000006 00000006 00000491 de6a7680 d772601e d7726032 c0349f74 e09a2dc2 00000006 c0349e5e 00000006 00000000 d76dda28 00000491 c0349f74 Call Trace: [<e09a2b4e>] mangle_contents+0x62/0xfe [ip_nat] [<e09a2dc2>] ip_nat_mangle_tcp_packet+0xa1/0x191 [ip_nat] [<e0a2712d>] set_addr+0x74/0x14c [ip_nat_h323] [<e0ad531e>] process_setup+0x11b/0x29e [ip_conntrack_h323] [<e0ad534f>] process_setup+0x14c/0x29e [ip_conntrack_h323] [<e0ad57bd>] process_q931+0x3c/0x142 [ip_conntrack_h323] [<e0ad5dff>] q931_help+0xe0/0x144 [ip_conntrack_h323] ... Found by the PROTOS c07-h2250v4 testsuite. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bryan O'Sullivan 提交于
At this point, the core QP structure hasn't been initialized, so what's in there isn't valid. Get the same information elsewhere. Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
The problem was that node A's sending thread, which handles sending RDMA read response data, would write the trigger word, the last packet would be sent, node B would send a new RDMA read request, node A's interrupt handler would initialize s_rdma_sge, then node A's sending thread would update s_rdma_sge. This didn't happen very often naturally but was more frequent with 1 byte RDMA reads. Rather than adding more locking or increasing the QP structure size and copying sge data, I modified the copy routine to update the pointers before writing the trigger word to avoid the update race. Signed-off-by: NRalph Campbell <ralphc@pathscale.com> Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
This fixes an oops. Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
Fixed so it works on the PE-800. It had not previously been updated to match PE-800 receive interrupt differences from HT-400. Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
This is required for even semi-decent performance on OpenIB. Signed-off-by: NBryan O'Sullivan <bos@pathscale.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-