- 28 2月, 2010 8 次提交
-
-
由 Finn Thain 提交于
Remove the old 68k Mac serial port code and a lot of related cruft. Add new SCC platform devices to mac 68k platform. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Finn Thain 提交于
Add platform driver support to the pmac-zilog driver, for m68k macs. Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Finn Thain 提交于
Adjust the platform device code to conform with the code style used in the rest of this patch series. No need to name resources nor to register devices which are not applicable. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Finn Thain 提交于
Cleanup whitespace and comments. Remove some dead code. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Julia Lawall 提交于
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Philippe De Muyter 提交于
Remove the comments referring to a function map_chunk that no longer exists. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Philippe De Muyter 提交于
The test in __ioremap to reject memory ranges crossing the 0 boundary rejects also memory ranges ending at the end of the memory. Fix that. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Maxim Kuvyrkov 提交于
Make asm/swab.h compatible with ColdFire ISA_B CPUs. Signed-off-by: NMaxim Kuvyrkov <maxim@codesourcery.com> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 27 2月, 2010 4 次提交
-
-
由 Murali Karicheri 提交于
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NMurali Karicheri <mkaricheri@gmail.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or even to request GPIOs to be used by the camera *sensor*. These initializations can be performed statically in machine init functions. The current semantics for this init() callback is ambiguous anyways, it is invoked in pxa_camera_activate(), hence at device node open, but its users use it like a generic initialization to be done at module init time (configure MFP, request GPIOs for *sensor* control). Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
This patch removes "buswidth" struct member, and sets the default buswidth to the natively supported 10 bit. You can select 8 bit buswidth by new flag. This patch also modify ap325rxa/migor setup.c Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Muralidharan Karicheri 提交于
This adds platform code for ccdc driver on DM355 and DM6446. 1) new ccdc platform devices added 2) added clock aliases master and slave for CCDC clocks 3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com> Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMuralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 2月, 2010 6 次提交
-
-
由 Magnus Damm 提交于
CONFIG_PM is always set on SH-Mobile these days so get rid of the unused LED setup code. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Allow building the ecovec board support code even though I2C support is disabled. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds board specific r-standby resume code for ecovec. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds board specific r-standby resume code for ms7724se. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add code to save/restore registers during R-standby sleep on SH-Mobile processors. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Thomas Gleixner 提交于
commit ff097ddd (x86/PCI: MMCONFIG: manage pci_mmcfg_region as a list, not a table) introduced a nasty memory corruption when pci_mmcfg_list is empty. pci_mmcfg_check_end_bus_number() dereferences pci_mmcfg_list.prev even when the list is empty. The following write hits some variable near to pci_mmcfg_list. Further down a similar problem exists, where cfg->list.next is dereferenced unconditionally and a comparison with some variable near to pci_mmcfg_list happens. Add a check for the last element into the for_each_entry() loop and remove all the other crappy logic which is just a leftover of the old array based code which was replaced by the list conversion. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 25 2月, 2010 4 次提交
-
-
由 Kuninori Morimoto 提交于
KEYSC::SCN register of SH7724 is 3bit. Thus, scan_timing should be 0 - 7 here. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Carlos O'Donell 提交于
Set the PCI CLS early in the boot process to prevent device failures. In pcibios_set_master use the new pci_cache_line_size instead of a hard-coded value. Signed-off-by: NCarlos O'Donell <carlos@codesourcery.com> Reviewed-by: NGrant Grundler <grundler@google.com> Signed-off-by: NKyle McMartin <kyle@redhat.com>
-
- 24 2月, 2010 6 次提交
-
-
由 Steven J. Magnani 提交于
Trailing semicolon causes compilation involving out_le32() to fail. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
I create wrong asm code but none test shows that this part of code is wrong. I am not convinces that were good idea to create asm optimized macros for caches. The reason is that there is not optimization with previous code that's why make sense to add old code and do some benchmarking which functions are faster. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Hedi Berriche 提交于
Revert the change made to arch/ia64/sn/kernel/setup.c by commit 204fba4a as it breaks the build. Fixing the build the b94b0808 way breaks xpc because genksyms then fails to generate an CRC for per_cpu____sn_cnodeid_to_nasid because of limitations in the generic genksyms code. Signed-off-by: NHedi Berriche <hedi@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Bjorn Helgaas 提交于
The main benefit of using ACPI host bridge window information is that we can do better resource allocation in systems with multiple host bridges, e.g., http://bugzilla.kernel.org/show_bug.cgi?id=14183 Sometimes we need _CRS information even if we only have one host bridge, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/341681 Most of these systems are relatively new, so this patch turns on "pci=use_crs" only on machines with a BIOS date of 2008 or newer. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
Previously we used a table of size PCI_BUS_NUM_RESOURCES (16) for resources forwarded to a bus by its upstream bridge. We've increased this size several times when the table overflowed. But there's no good limit on the number of resources because host bridges and subtractive decode bridges can forward any number of ranges to their secondary buses. This patch reduces the table to only PCI_BRIDGE_RESOURCE_NUM (4) entries, which corresponds to the number of windows a PCI-to-PCI (3) or CardBus (4) bridge can positively decode. Any additional resources, e.g., PCI host bridge windows or subtractively-decoded regions, are kept in a list. I'd prefer a single list rather than this split table/list approach, but that requires simultaneous changes to every architecture. This approach only requires immediate changes where we set up (a) host bridges with more than four windows and (b) subtractive-decode P2P bridges, and we can incrementally change other architectures to use the list. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 23 2月, 2010 8 次提交
-
-
由 Paul Mundt 提交于
This hooks up the SET/GET_UNALIGN_CTL knobs cribbing the bulk of it from the PPC and ia64 implementations. The thread flags happen to be the logical inverse of what the global fault mode is set to, so this works out pretty cleanly. By default the global fault mode is used, with tasks now being able to override their own settings via prctl(). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Follow the ARM change, which is what our alignment helpers are based on in the first place. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Dominik Brodowski 提交于
Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Dominik Brodowski 提交于
As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Seth Heasley 提交于
This patch adds the Intel Cougar Point (PCH) LPC and SMBus Controller DeviceIDs. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Hauke Mehrtens 提交于
Ignoring the last page when ddr size is 128M. Cached accesses to last page is causing the processor to prefetch using address above 128M stepping out of the DDR address space. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/981/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
arch/mips/mm/highmem.c: In function 'kmap_init': arch/mips/mm/highmem.c:130: error: 'init_mm' undeclared (first use in this function) arch/mips/mm/highmem.c:130: error: (Each undeclared identifier is reported only once arch/mips/mm/highmem.c:130: error: for each function it appears in.) Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/980/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Roland McGrath 提交于
This reverts commit 81bf550d. HAVE_ARCH_TRACEHOOK requires defining the user_regset interfaces, including task_user_regset_view(). parisc doesn't do that yet, so don't lie about it. Signed-off-by: NRoland McGrath <roland@redhat.com>
-
- 22 2月, 2010 4 次提交
-
-
由 Kuninori Morimoto 提交于
When FSI and Network (= NFS file system) were used at the same time, the I/O of FSI was unstable. This patch updates the SPU2 clock (which is used for FSI) to solve this issue. Special thanks to Jeremy. Signed-off-by: NJeremy Baker <Jeremy.Baker@renesas.com> Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Update the sh7724 processor code to always enable vpu_clk. On the Ecovec board, set the vpu_clk to 166 Mhz. The 166MHz setting results in a divide-by-6 setup for vpu_clk and improves the VPU performance compared to the power-on-reset/bootloader configuration. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds a ->kick() callback to clk_div4_table and ties it into sh_clk_div4_set_rate(). A sh7724 specific kick function is also added that updates the KICK bit whenever div4 clocks in FRQCRA and FRQCRB have been set. Allows us to set the VPU clock. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch introduces struct clk_div4_table. The structure will be used to keep div4 specific data, and is with this patch replacing the struct clk_div_mult_table pointer arg used by the sh_clk_div4_register() functions. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-