Seems like needless clutter having a bunch of #if defined(CONFIG_$ARCH) in
include/linux/cache.h.  Move the per architecture section definition to
asm/cache.h, and keep the if-not-defined dummy case in linux/cache.h to
catch architectures which don't implement the section.

Verified that symbols still go in .data.read_mostly on parisc,
and the compile doesn't break.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since early 2.4.x all cdrom drivers implement the block_device methods
themselves, so they can handle additional ioctls directly instead of going
through the cdrom layer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a small helper for each ioctl to cut down cdrom_ioctl to a readable
size.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid taking the global tasklist_lock when possible, if a process is single
threaded during getrusage().  Any avoidance of tasklist_lock is good for
NUMA boxes (and possibly for large SMPs).  Thanks to Oleg Nesterov for
review and suggestions.
Signed-off-by: NNippun Goel <nippung@calsoftinc.com>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1) Reduce the size of (struct fdtable) to exactly 64 bytes on 32bits
   platforms, lowering kmalloc() allocated space by 50%.

2) Reduce the size of (files_struct), using a special 32 bits (or
   64bits) embedded_fd_set, instead of a 1024 bits fd_set for the
   close_on_exec_init and open_fds_init fields.  This save some ram (248
   bytes per task) as most tasks dont open more than 32 files.  D-Cache
   footprint for such tasks is also reduced to the minimum.

3) Reduce size of allocated fdset.  Currently two full pages are
   allocated, that is 32768 bits on x86 for example, and way too much.  The
   minimum is now L1_CACHE_BYTES.

UP and SMP should benefit from this patch, because most tasks will touch
only one cache line when open()/close() stdin/stdout/stderr (0/1/2),
(next_fd, close_on_exec_init, open_fds_init, fd_array[0 ..  2] being in the
same cache line)
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Linus points out that ext3_readdir's readahead only cuts in when
ext3_readdir() is operating at the very start of the directory.  So for large
directories we end up performing no readahead at all and we suck.

So take it all out and use the core VM's page_cache_readahead().  This means
that ext3 directory reads will use all of readahead's dynamic sizing goop.

Note that we're using the directory's filp->f_ra to hold the readahead state,
but readahead is actually being performed against the underlying blockdev's
address_space.  Fortunately the readahead code is all set up to handle this.

Tested with printk.  It works.  I was struggling to find a real workload which
actually cared.

(The patch also exports page_cache_readahead() to GPL modules)

Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the standard BCD macros instead of redefining them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the SNAPSHOT_S2RAM ioctl to the snapshot device.

This ioctl allows a userland application to make the system (previously frozen
with the SNAPSHOT_FREE ioctl) enter the S3 state without freezing processes
and disabling nonboot CPUs for the second time.

This will allow us to implement the suspend-to-disk-and-RAM (STDR)
functionality in the userland suspend tools.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the console-switching code from the suspend part of the swsusp userland
interface and let the userland tools switch the console.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is unsafe to suspend devices if the hardware is controlled by X.  Add an
extra check to prevent this from happening.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Highmem could be in pcp list as well.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch from Pavel moves userland freeze signals handling into more logical
place.  It now hits even with mysqld running.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Combination of printk/pr_debug led to <7> in the middle of the line, and we
printed way too many dots.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow swsusp to freeze processes successfully under heavy load by freezing
userspace processes before kernel threads.

[Thanks to Nigel Cunningham <nigel@suspend2.net> for suggesting the
way to go.]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch introduces a user space interface for swsusp.

The interface is based on a special character device, called the snapshot
device, that allows user space processes to perform suspend and resume-related
operations with the help of some ioctls and the read()/write() functions.
 Additionally it allows these processes to allocate free swap pages from a
selected swap partition, called the resume partition, so that they know which
sectors of the resume partition are available to them.

The interface uses the same low-level system memory snapshot-handling
functions that are used by the built-it swap-writing/reading code of swsusp.

The interface documentation is included in the patch.

The patch assumes that the major and minor numbers of the snapshot device will
be 10 (ie.  misc device) and 231, the registration of which has already been
requested.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update suspend-to-RAM documentation with new machines, and makes message
when processes can't be stopped little clearer.  (In one case, waiting
longer actually did help).

From: "Rafael J. Wysocki" <rjw@sisk.pl>

  Warn in the documentation that data may be lost if there are some
  filesystems mounted from USB devices before suspend.

  [Thanks to Alan Stern for providing the answer to the question in the
  Q:-A: part.]
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move externs from C source files to header files.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the swap-writing/reading code of swsusp to a separate file.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce the low level interface that can be used for handling the
snapshot of the system memory by the in-kernel swap-writing/reading code of
swsusp and the userland interface code (to be introduced shortly).

Also change the way in which swsusp records the allocated swap pages and,
consequently, simplifies the in-kernel swap-writing/reading code (this is
necessary for the userland interface too).  To this end, it introduces two
helper functions in mm/swapfile.c, so that the swsusp code does not refer
directly to the swap internals.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This was a temporary thing for 2.6.16.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't create "online" control file for BSP (i386/x86_64) since its
not removable.

We originally added this to support ppc64 if the kernel has support but
BIOS indicated no offline support, we just didnt create online files for
them.

We used the same method in ia64 as well, if we have a cpu taking platform
interrupts but cannot be removed if those interrupts cannot be re-targeted
to another cpu.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Gcc reserves %ebx when compiling position-independent-code on i386.  This
means, the _syscallX() macros in include/asm-i386/unistd.h will not
compile.  This patch is changes the existing macros to take special care to
preserve %ebx.

The bug can be tracked at http://bugzilla.kernel.org/show_bug.cgi?id=6204Signed-off-by: NMarkus Gutschke <markus@google.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

You must always ensure to fulfill the dependencies of what you are
select'ing.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Martin Bligh <mbligh@google.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

_raw_spin_lock_flags() is entered with interrupts disabled.  If it cannot
obtain a spinlock, it checks the flags that were passed and re-enables
interrupts before spinning if that's how the flags are set.  When the
spinlock might be available, it disables interrupts (even if they are
already disabled) before trying to get the lock.  Change that so interrupts
are only disabled if they have been enabled.  This costs nine bytes of
duplicated spinloop code.

Fastpath before patch:
        jle <keep looping>      not-taken conditional jump
        cli                     disable interrupts
        jmp <try for lock>      unconditional jump

Fastpath after patch, if interrupts were not enabled:
        jg <try for lock>       taken conditional branch
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Checking APIC version instead of CPU family to determine XAPIC. Family 6
CPU could have xapic as well.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: "Seth, Rohit" <rohit.seth@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Detecting cache line using cpuid.4, cpuid level 4 is enough.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: "Seth, Rohit" <rohit.seth@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

i386 has a small bug in the stack dump code where it prints an extra log
level code.  Remove that and fix the alignment of normal stack dump
printout.  Also remove some unnecessary printk() calls.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With cpu_gdt_descr having been converted to per-CPU data, the old object
(in head.S) no longer needs to reserve space for each CPU's instance.  With
cpu_gdt_table not being used for CPU 0 anymore, it doesn't seem to need
page alignment (or if in fact there is a need for it to retain that
alignment, the whole object should go into .data.page_align).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Acked-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/i386/kernel/cpu/centaur.c: In function `centaur_mcr_insert':
arch/i386/kernel/cpu/centaur.c:33: warning: implicit declaration of function `mtrr_centaur_report_mcr'
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/i386/kernel/apic.c:840: warning: implicit declaration of function `GET_APIC_ID'
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Document a limitation of vsyscall-sysenter, since patches to fix it have
been rejected.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Using PTRACE_SINGLESTEP on a child that does an int80 syscall misses the
SIGTRAP that should be delivered upon syscall exit.  Fix that by setting
TIF_SINGLESTEP when entering the kernel via int80 with TF set.

/* Test whether singlestep through an int80 syscall works.
 */
#define _GNU_SOURCE
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <sys/mman.h>
#include <asm/user.h>

static int child, status;
static struct user_regs_struct regs;

static void do_child()
{
	ptrace(PTRACE_TRACEME, 0, 0, 0);
	kill(getpid(), SIGUSR1);
	asm ("int $0x80" : : "a" (20)); /* getpid */
}

static void do_parent()
{
	unsigned long eip, expected = 0;
again:
	waitpid(child, &status, 0);
	if (WIFEXITED(status) || WIFSIGNALED(status))
		return;

	if (WIFSTOPPED(status)) {
		ptrace(PTRACE_GETREGS, child, 0, &regs);
		eip = regs.eip;
		if (expected)
			fprintf(stderr, "child stop @ %08x, expected %08x %s\n",
					eip, expected,
					eip == expected ? "" : " <== ERROR");

		if (*(unsigned short *)eip == 0x80cd) {
			fprintf(stderr, "int 0x80 at %08x\n", (unsigned int)eip);
			expected = eip + 2;
		} else
			expected = 0;

		ptrace(PTRACE_SINGLESTEP, child, NULL, NULL);
	}
	goto again;
}

int main(int argc, char * const argv[])
{
	child = fork();
	if (child)
		do_parent();
	else
		do_child();
	return 0;
}
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

>commit 76381fee
>Author: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
>Date:   Thu Jun 23 00:08:46 2005 -0700
>
>    [PATCH] xen: x86_64: use more usermode macro
>
>    Make use of the user_mode macro where it's possible.  This is useful for Xen
>    because it will need only to redefine only the macro to a hypervisor call.

I am of the opinion that the above changeset is incomplete, i.e.  it missed
converting some previous uses of user_mode to user_mode_vm.  While most of
them could be considered just cosmetical, at least the one in die_nmi
doesn't appear to be.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Zachary Amsden <zach@vmware.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Registering a callback handler through register_die_notifier() is obviously
primarily intended for use by modules.  However, the way these currently
get called it is basically impossible for them to actually be used by
modules, as there is, on non-PAE configurationes, a good chance (the larger
the module, the better) for the system to crash as a result.

This is because the callback gets invoked

(a) in the page fault path before the top level page table propagation
    gets carried out (hence a fault to propagate the top level page table
    entry/entries mapping to module's code/data would nest infinitly) and

(b) in the NMI path, where nested faults must absolutely not happen,
    since otherwise the IRET from the nested fault re-enables NMIs,
    potentially resulting in nested NMI occurences.

Besides the modular aspect, similar problems would even arise for in-
kernel consumers of the API if they touched ioremap()ed or vmalloc()ed
memory inside their handlers.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Register the boot-cpu in the cpu maps earlier to allow the early printk to
work, and to fix an obscure deadlock at boot.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Expand out these fairly pointless macros.

Cc: Chuck Ebbert <76306.1226@compuserve.com>
Cc: Stas Sergeev <stsp@aknet.ru>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use boot info to start early_printk() at the current row on VGA console, as
left by the boot loader.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Cc: Stas Sergeev <stsp@aknet.ru>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The history is that -mm kernels do not work for me for a few months
already.  The things started from crashing somewhere after starting init,
and for the last month - no boot at all, just "Uncompressing...  OK,
booting kernel", and silence.  Early console didn't work too.  With the
latest releases this degraded into an infinite stream of the "Unknown
interrupt or fault" messages.  So today my patience ran out and I started
to think how can I collect at least some info for the bug-report.  Attached
is the patch that allows to gather some valueable debug info on the problem
by making an early console more useable.  I can't properly test the patch,
as the kernel still doesn't boot, so I'll explain it in details in a hope
someone else can justify the intrusive changes.

arch_hooks.h: added prototypes for setup_early_printk() and early_printk().

setup.c: killed wrong setup_early_printk() prototype.  Moved
setup_early_printk() a bit earlier, as it was not "early enough" to cover
the bug I was fighting with.

early_printk.c: made it to start printing from the bottom of the screen,
otherwise the messages interfere with the ones of the boot-loader, so you
can't read them.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Cc: Andi Kleen <ak@muc.de>
Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow signal handlers to set the RF bit in EFLAGS.  This lets a simple
debugger using SIGTRAP skip one instruction after returning from a signal.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's no good reason for allowing ptrace to set the NT bit in EFLAGS, so
mask it off.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>