Commit 8f1eb487 ("ocfs2: fix umask ignored issue") introduced an
issue, SGID of sub dir was not inherited from its parents dir.  It is
because SGID is set into "inode->i_mode" in ocfs2_get_init_inode(), but
is overwritten by "mode" which don't have SGID set later.

Fixes: 8f1eb487 ("ocfs2: fix umask ignored issue")
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Acked-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

New created file's mode is not masked with umask, and this makes umask not
work for ocfs2 volume.

Fixes: 702e5bc6 ("ocfs2: use generic posix ACL infrastructure")
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_mknod_locked if '__ocfs2_mknod_locke		d' returns an error, we
should reclaim the inode successfully claimed above, otherwise, the
inode never be reused. The case is described below:

ocfs2_mknod
    ocfs2_mknod_locked
        ocfs2_claim_new_inode
                Successfully claim the inode
        __ocfs2_mknod_locked
            ocfs2_journal_access_di
            Failed because of -ENOMEM or other reasons, the inode
                        lockres has not been initialized yet.

    iput(inode)
        ocfs2_evict_inode
            ocfs2_delete_inode
                ocfs2_inode_lock
                    ocfs2_inode_lock_full_nested
                        __ocfs2_cluster_lock
                                Return -EINVAL because of the inode
                                lockres has not been initialized.

                So the following operations are not performed
                ocfs2_wipe_inode
                        ocfs2_remove_inode
                                ocfs2_free_dinode
                                        ocfs2_free_suballoc_bits
Signed-off-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dio entry will only do truncate in case of ORPHAN_NEED_TRUNCATE. So do
not include it when doing normal orphan scan to reduce contention.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When running dirop_fileop_racer we found a case that inode
can not removed.

Two nodes, say Node A and Node B, mount the same ocfs2 volume.  Create
two dirs /race/1/ and /race/2/ in the filesystem.

  Node A                            Node B
  rm -r /race/2/
                                    mv /race/1/ /race/2/
  call ocfs2_unlink(), get
  the EX mode of /race/2/
                                    wait for B unlock /race/2/
  decrease i_nlink of /race/2/ to 0,
  and add inode of /race/2/ into
  orphan dir, unlock /race/2/
                                    got EX mode of /race/2/. because
                                    /race/1/ is dir, so inc i_nlink
                                    of /race/2/ and update into disk,
                                    unlock /race/2/
  because i_nlink of /race/2/
  is not zero, this inode will
  always remain in orphan dir

This patch fixes this case by test whether i_nlink of new dir is zero.
Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Xue jiufei <xuejiufei@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_rename, it will lead to an inode with two entried(old and new) if
ocfs2_delete_entry(old) failed.  Thus, filesystem will be inconsistent.

The case is described below:

ocfs2_rename
    -> ocfs2_start_trans
    -> ocfs2_add_entry(new)
    -> ocfs2_delete_entry(old)
        -> __ocfs2_journal_access *failed* because of -ENOMEM
    -> ocfs2_commit_trans

So filesystem should be set to read-only at the moment.
Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unlocking order in ocfs2_unlink and ocfs2_rename mismatches the
corresponding locking order, although it won't cause issues, adjust the
code so that it looks more reasonable.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During direct io the inode will be added to orphan first and then
deleted from orphan.  There is a race window that the orphan entry will
be deleted twice and thus trigger the BUG when validating
OCFS2_DIO_ORPHANED_FL in ocfs2_del_inode_from_orphan.

ocfs2_direct_IO_write
    ...
    ocfs2_add_inode_to_orphan
    >>>>>>>> race window.
             1) another node may rm the file and then down, this node
             take care of orphan recovery and clear flag
             OCFS2_DIO_ORPHANED_FL.
             2) since rw lock is unlocked, it may race with another
             orphan recovery and append dio.
    ocfs2_del_inode_from_orphan

So take inode mutex lock when recovering orphans and make rw unlock at the
end of aio write in case of append dio.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reported-by: NYiwen Jiang <jiangyiwen@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dquot_initialize() can now return error. Handle it where possible.
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NJan Kara <jack@suse.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Once dio crashed it will leave an entry in orphan dir.  And orphan scan
will take care of the clean up.  There is a tiny race case that the same
entry will be truncated twice and then trigger the BUG in
ocfs2_del_inode_from_orphan.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When ocfs2_get_system_file_inode fails, it is obscure to set the return
value to -EEXIST. So change it to -ENOENT.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the namelen is 20 and name only has actual length 16, it will fail in
ocfs2_find_entry because of mismatch.  So use actual name length when find
entry.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If one node has crashed with orphan entry leftover, another node which do
append O_DIRECT write to the same file will override the
i_dio_orphaned_slot.  Then the old entry won't be cleaned forever.  If
this case happens, we let it wait for orphan recovery first.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add functions to add inode to orphan dir and remove inode in orphan dir.
Here we do not call ocfs2_prepare_orphan_dir and ocfs2_orphan_add
directly.  Because append O_DIRECT will add inode to orphan two and may
result in more than one orphan entry for the same inode.

[akpm@linux-foundation.org: avoid dynamic stack allocation]
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Cc: Fengguang Wu <fengguang.wu@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_link(), the parent directory inode passed to function
ocfs2_lookup_ino_from_name() is wrong.  Parameter dir is the parent of
new_dentry not old_dentry.  We should get old_dir from old_dentry and
lookup old_dentry in old_dir in case another node remove the old dentry.

With this change, hard linking works again, when paths are relative with
at least one subdirectory.  This is how the problem was reproducable:

  # mkdir a
  # mkdir b
  # touch a/test
  # ln a/test b/test
  ln: failed to create hard link `b/test' => `a/test': No such file or  directory

However when creating links in the same dir, it worked well.

Now the link gets created.

Fixes: 0e048316 ("ocfs2: check existence of old dentry in ocfs2_link()")
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Reported-by: NSzabo Aron - UBIT <aron@ubit.hu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Tested-by: NAron Szabo <aron@ubit.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

d_splice_alias() can return a valid dentry, NULL or an ERR_PTR.
Currently the code checks not for ERR_PTR and will cuase an oops in
ocfs2_dentry_attach_lock().  Fix this by using IS_ERR_OR_NULL().
Signed-off-by: NRichard Weinberger <richard@nod.at>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the call to ocfs2_add_entry() failed in ocfs2_symlink() and
ocfs2_mknod(), iput() will not be called during dput(dentry) because no
d_instantiate(), and this will lead to umount hung.
Signed-off-by: Njiangyiwen <jiangyiwen@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When running dirop_fileop_racer we found a dead lock case.

2 nodes, say Node A and Node B, mount the same ocfs2 volume.  Create
/race/16/1 in the filesystem, and let the inode number of dir 16 is less
than the inode number of dir race.

Node A                            Node B
mv /race/16/1 /race/
                                  right after Node A has got the
                                  EX mode of /race/16/, and tries to
                                  get EX mode of /race
                                  ls /race/16/

In this case, Node A has got the EX mode of /race/16/, and wants to get EX
mode of /race/.  Node B has got the PR mode of /race/, and wants to get
the PR mode of /race/16/.  Since EX and PR are mutually exclusive, dead
lock happens.

This patch fixes this case by locking in ancestor order before trying
inode number order.
Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two files a and b in dir /mnt/ocfs2.

    node A                           node B

  mv a b
  In ocfs2_rename(), after calling
  ocfs2_orphan_add(), the inode of
  file b will be added into orphan
  dir.

  If ocfs2_update_entry() fails,
  ocfs2_rename return error and mv
  operation fails. But file b still
  exists in the parent dir.

  ocfs2_queue_orphan_scan
   -> ocfs2_queue_recovery_completion
   -> ocfs2_complete_recovery
   -> ocfs2_recover_orphans
  The inode of the file b will be
  put with iput().

  ocfs2_evict_inode
   -> ocfs2_delete_inode
   -> ocfs2_wipe_inode
   -> ocfs2_remove_inode
  OCFS2_VALID_FL in the inode
  i_flags will be cleared.

                                   The file b still can be accessed
                                   on node B.
                                   ls /mnt/ocfs2
                                   When first read the file b with
                                   ocfs2_read_inode_block(). It will
                                   validate the inode using
                                   ocfs2_validate_inode_block().
                                   Because OCFS2_VALID_FL not set in
                                   the inode i_flags, so the file
                                   system will be readonly.

So we should add inode into orphan dir after updating entry in
ocfs2_rename().
Signed-off-by: Nalex.chen <alex.chen@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ensure that ocfs2_update_inode_fsync_trans() is called any time we touch
an inode in a given transaction.  This is a follow-on to the previous
patch to reduce lock contention and deadlocking during an fsync
operation.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Wengang <wen.gang.wang@oracle.com>
Cc: Greg Marsden <greg.marsden@oracle.com>
Cc: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9548906b ('xattr: Constify ->name member of "struct xattr"')
missed that ocfs2 is calling kfree(xattr->name).  As a result, kernel
panic occurs upon calling kfree(xattr->name) because xattr->name refers
static constant names.  This patch removes kfree(xattr->name) from
ocfs2_mknod() and ocfs2_symlink().
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: NTariq Saeed <tariq.x.saeed@oracle.com>
Tested-by: NTariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When ocfs2_create_new_inode_locks() return error, inode open lock may
not be obtainted for this inode.  So other nodes can remove this file
and free dinode when inode still remain in memory on this node, which is
not correct and may trigger BUG.  So __ocfs2_mknod_locked should return
error when ocfs2_create_new_inode_locks() failed.

              Node_1                              Node_2
create fileA, call ocfs2_mknod()
  -> ocfs2_get_init_inode(), allocate inodeA
  -> ocfs2_claim_new_inode(), claim dinode(dinodeA)
  -> call ocfs2_create_new_inode_locks(),
     create open lock failed, return error
  -> __ocfs2_mknod_locked return success

                                                unlink fileA
                                                try open lock succeed,
                                                and free dinodeA

create another file, call ocfs2_mknod()
  -> ocfs2_get_init_inode(), allocate inodeB
  -> ocfs2_claim_new_inode(), as Node_2 had freed dinodeA,
     so claim dinodeA and update generation for dinodeA

call __ocfs2_drop_dl_inodes()->ocfs2_delete_inode()
to free inodeA, and finally triggers BUG
on(inode->i_generation != le32_to_cpu(fe->i_generation))
in function ocfs2_inode_lock_update().
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, ocfs2_sync_file grabs i_mutex and forces the current journal
transaction to complete.  This isn't terribly efficient, since sync_file
really only needs to wait for the last transaction involving that inode
to complete, and this doesn't require i_mutex.

Therefore, implement the necessary bits to track the newest tid
associated with an inode, and teach sync_file to wait for that instead
of waiting for everything in the journal to commit.  Furthermore, only
issue the flush request to the drive if jbd2 hasn't already done so.

This also eliminates the deadlock between ocfs2_file_aio_write() and
ocfs2_sync_file().  aio_write takes i_mutex then calls
ocfs2_aiodio_wait() to wait for unaligned dio writes to finish.
However, if that dio completion involves calling fsync, then we can get
into trouble when some ocfs2_sync_file tries to take i_mutex.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

System call linkat first calls user_path_at(), check the existence of
old dentry, and then calls vfs_link()->ocfs2_link() to do the actual
work.  There may exist a race when Node A create a hard link for file
while node B rm it.

         Node A                          Node B
user_path_at()
  ->ocfs2_lookup(),
find old dentry exist
                                rm file, add inode say inodeA
                                to orphan_dir

call ocfs2_link(),create a
hard link for inodeA.

                                rm the link, add inodeA to orphan_dir
                                again

When orphan_scan work start, it calls ocfs2_queue_orphans() to do the
main work.  It first tranverses entrys in orphan_dir, linking all inodes
in this orphan_dir to a list look like this:

	inodeA->inodeB->...->inodeA

When tranvering this list, it will fall into loop, calling iput() again
and again.  And finally trigger BUG_ON(inode->i_state & I_CLEAR).
Signed-off-by: Njoyce <xuejiufei@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suppress log message like this: (open_delete,8328,0):ocfs2_unlink:951
ERROR: status = -2

Orabug:17445485
Signed-off-by: NXiaowei Hu <xiaowei.hu@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This contains some major refactoring for the create path so that
inodes are created with the right mode to start with instead of
fixing it up later.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So return ENOMEM instead when it fails.

[joseph.qi@huawei.com: ocfs2_symlink_get_block() and ocfs2_read_blocks_sync() and ocfs2_read_blocks() need the same change]
Signed-off-by: NRui Xiang <rui.xiang@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While deleting a file with ocfs2_unlink(), there is a bug in this
function.  This bug will result in filesystem read-only.

After calling ocfs2_orphan_add(), the file which will be deleted is
added into orphan dir.  If ocfs2_delete_entry() fails, the file still
exists in the parent dir.  And this scenario introduces a conflict of
metadata.

If a file is added into orphan dir, when we put inode of the file with
iput(), the inode i_flags is setted (~OCFS2_VALID_FL) in
ocfs2_remove_inode(), and then write back to disk.

But as previously mentioned, the file still exists in the parent dir.
On other nodes, the file can be still accessed.  When first read the
file with ocfs2_read_blocks() from disk, It will check and avalidate
inode using ocfs2_validate_inode_block().  So File system will be
readonly because the inode is invalid.  In other words, the inode
i_flags has been set (~OCFS2_VALID_FL).

[akpm@linux-foundation.org: cleanups]
[jeff.liu@oracle.com: s/inode_is_unlinkable/ocfs2_inode_is_unlinkable/]
Signed-off-by: NYounger Liu <younger.liu@huawei.com>
Signed-off-by: NJensen <shencanquan@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While adding a file into orphan dir in ocfs2_orphan_add(), it calls
__ocfs2_add_entry() before ocfs2_journal_access_di().  If
ocfs2_journal_access_di() failed, the file is added into orphan dir, and
orphan dir dinode updated, but file dinode has not been updated.
Accordingly, the data is not consistent between file dinode and orphan
dir.

So, need to call ocfs2_journal_access_di() before __ocfs2_add_entry(),
and if ocfs2_journal_access_di() failed, orphan_fe and
orphan_dir_inode->i_nlink need rollback.

This bug was added by 3939fda4 ("Ocfs2: Journaling i_flags and
i_orphaned_slot when adding inode to orphan dir.").
Signed-off-by: NYounger Liu <younger.liu@huawei.com>
Acked-by: NJeff Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we use le32_add_cpu to set ocfs2_dinode i_flags, it may lead to the
corresponding flag corrupted.  So we should change it to bitwise and/or
operation.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: shencanquan <shencanquan@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While removing a non-empty directory, the kernel dumps a message:

  (rmdir,21743,1):ocfs2_unlink:953 ERROR: status = -39

Suppress the error message from being printed in the dmesg so users
don't panic.
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Acked-by: NSunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If an error occurs, for example an EIO in __ocfs2_prepare_orphan_dir,
ocfs2_prep_new_orphaned_file will release the inode_ac, then when the
caller of ocfs2_prep_new_orphaned_file gets a 0 return, it will refer to
a NULL ocfs2_alloc_context struct in the following functions.  A kernel
panic happens.
Signed-off-by: N"Xiaowei.Hu" <xiaowei.hu@oracle.com>
Reviewed-by: Nshencanquan <shencanquan@huawei.com>
Acked-by: NSunil Mushran <sunil.mushran@gmail.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

boolean "does it have to be exclusive?" flag is passed instead;
Local filesystem should just ignore it - the object is guaranteed
not to be there yet.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Just the flags; only NFS cares even about that, but there are
legitimate uses for such argument.  And getting rid of that
completely would require splitting ->lookup() into a couple
of methods (at least), so let's leave that alone for now...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

seeing that "fast" symlinks still get allocation + copy, we might as
well simply switch them to pagecache-based variant of ->follow_link();
just need an appropriate ->readpage() for them...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

unfortunately, nlink_t may be smaller than 32 bits and ->i_nlink
on ocfs2 can grow up to 0xffffffff; storing it in nlink_t variable
will lose upper bits on such architectures.  Needs to be made u32,
until we get kernel-side nlink_t uniformly 32bit...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>