Revert 5c3b99d0 ("PCI: dra7xx: Mark driver as broken").

1c96bee4 ("ARM: DRA7: hwmod: Add custom reset handler for PCIeSS")
added support to de-assert PCIe reset, so DRA7x PCIe is not broken anymore.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Commit e7e127e3 ("PCI: Include pci/hotplug Kconfig directly from
pci/Kconfig") added one line to pci/Kconfig.  However, for some mysterious
reason it isn't there now, even though there are no traces of removing it
in the git log.

I detected this issue when 'make oldconfig' removed all the options that
depended on HOTPLUG_PCI.

[bhelgaas: I botched the cfeb8139 ("Merge branch 'pci/host-hv' into
next") merge.  "git diff cfeb8139^ cfeb8139" shows a conflict in
drivers/pci/Kconfig, and I mistakenly dropped the hotplug/Kconfig piece.]
Signed-off-by: NTero Roponen <tero.roponen@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

PCI-SIG has defined Interface FEh for Base Class 0Ch, Sub-Class 03h as "USB
Device (not host controller)".  It is already being used in various USB
device controller drivers for matching, so add PCI_CLASS_SERIAL_USB_DEVICE
and use it.
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add a reference platform driver for PCI RC IP Protoyping Kits based on the
ARC SDP.

[bhelgaas: changelog, split patch up, MAINTAINERS update]
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

Add a default DesignWare "link_up" test for use when a sub-driver doesn't
supply its own pcie_host_ops.link_up() method.

[bhelgaas: changelog, split into its own patch]
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

Several DesignWare-based drivers (dra7xx, exynos, imx6, keystone, qcom, and
spear13xx) had similar loops waiting for the link to come up.

Add a generic dw_pcie_wait_for_link() for use by all these drivers so the
waiting is done consistently, e.g., always using usleep_range() rather than
mdelay() and using similar timeouts and retry counts.

Note that this changes the Keystone link training/wait for link strategy,
so we initiate link training, then wait longer for the link to come up
before re-initiating link training.

[bhelgaas: changelog, split into its own patch, update pci-keystone.c, pcie-qcom.c]
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

Clean up style issues in drivers/pci/pcie/Kconfig, in particular all
indentation is now done using tabs, not spaces, and the definition of
PCIEASPM_DEBUG is now separated from the definition of PCIEASPM with a
newline.
Signed-off-by: NAndreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Return error immediately to simplify the control flow in pci_create_attr().
No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

If sysfs_create_bin_file() fails, pci_create_attr() leaks the struct
bin_attribute it allocated previously.

Free the struct bin_attribute if pci_create_attr() fails.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The value of pdev->rom_attr is the definitive indicator of the fact that
we're created a sysfs attribute.  Check that rather than rom_size, which is
only used incidentally when deciding whether to create a sysfs attribute.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY bits are unused.
Remove them and code that depends on them.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Remove unnecessary indentation in pci_map_rom().  This is logically part of
the previous patch; I split it out to make the critical changes in that
patch more obvious.  No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

When pci_create_sysfs_dev_files() created the "rom" sysfs file, it set the
sysfs file size to the actual size of a ROM BAR, or if there was no ROM BAR
but the platform provided a shadow copy in RAM, to 0x20000.  0x20000 is an
arch-specific length that should not be baked into the PCI core.

Every place that sets IORESOURCE_ROM_SHADOW also sets the size of the
PCI_ROM_RESOURCE, so use the resource length always.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root
complexes.  These root complexes (loosely referred to as ECAM units in the
hardware manuals) are used to access the Thunder on-chip devices.  They
are special in that all the BARs on devices behind these root complexes are
at fixed addresses.

Add a driver for these devices that synthesizes Enhanced Allocation (EA)
capability entries for each BAR.

Since this EA synthesis is needed for exactly two chip models, we can hard-
code some assumptions about the device topology and the layout of the
config space of specific DEVFNs in the driver.

[bhelgaas: changelog, whitespace]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>

The root complexes used to access off-chip PCIe devices (called PEM units
in the hardware manuals) on some Cavium ThunderX processors require quirky
access methods for the config space of the PCIe bridge.

Add a driver to provide these config space accessor functions.  Use the
pci-host-common code to configure the PCI machinery.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Move pci_host_common_probe() and associated functions to pci-host-common.c,
where it can be shared with other drivers.  Make it public (not static)
and update Kconfig and Makefile to build it.  No functional change
intended.

[bhelgaas: split into separate patch, changelog]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will.deacon@arm.com>

Factor gen_pci_probe(), moving most of it into pci_host_common_probe()
where it can be shared with other drivers that have slightly different
config accessors.  No functional change intended.

[bhelgaas: split into separate patch, changelog]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will.deacon@arm.com>

Move definitions for generic PCI host controller driver structures to a
separate header file so we can share them with other drivers.  No
functional change intended.

[bhelgaas: split into separate patch, changelog]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will.deacon@arm.com>

Add PCIe Root Port driver for Xilinx PCIe NWL bridge IP.

[bhelgaas: wait for link like dw_pcie_wait_for_link(), simplify bitmap
error path, typos, whitespace, fold in Dan Carpenter's PTR_ERR() fix]
Signed-off-by: NBharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: NRavi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NRob Herring <robh@kernel.org>

A SerDes PHY is optional, so if devm_phy_get() doesn't find one at all,
that's fine.  But if devm_phy_get() finds a PHY that doesn't have a driver
yet, it returns -EPROBE_DEFER.  In that case, defer probing the Keystone
driver.  We may be able to load it later after a PHY driver is loaded.

[bhelgaas: changelog, check for -EPROBE_DEFER first]
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Originally altera_pcie_link_is_up() decided the link was up if any of the
low four bits of the LTSSM register were set.  But the link is only up if
the LTSSM state is L0, so check for that exact value.

[bhelgaas: changelog]
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS.  The motivation is that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Some devices take longer than the spec indicates to return from FLR reset,
a notable case of this is Intel integrated graphics (IGD), which can often
take an additional 300ms powering down an attached LCD panel as part of the
FLR.  Allow devices up to 1000ms, testing every 100ms whether the second
dword of config space is read as -1.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add PCI support to ARC and update drivers/pci Makefile enabling the ARC
arch to use the generic PCI setup functions.

[bhelgaas: fold in Joao's pci-dma-compat.h & pci-bridge.h build fix (I
should have caught this myself, sorry]
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

On some devices, reading or writing VPD causes a system panic.
This can be easily reproduced by running "lspci -vvv" or
"cat /sys/bus/devices/XX../vpd".

Blacklist these devices so we don't access VPD data at all.

[bhelgaas: changelog, comment, drop pci/access.c changes]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=110681Tested-by: NShane Seymour <shane.seymour@hpe.com>
Tested-by: NBabu Moger <babu.moger@oracle.com>
Signed-off-by: NBabu Moger <babu.moger@oracle.com>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>

Use usleep_range() instead of udelay() while waiting for a VPD access to
complete.  This is not a performance path, so no need to hog the CPU.

Rationale for usleep_range() parameters:

  We clear PCI_VPD_ADDR_F for a read (or set it for a write), then wait for
  the device to change it.  For a device that updates PCI_VPD_ADDR between
  our config write and subsequent config read, we won't sleep at all and
  can get the device's maximum rate.

  Sleeping a minimum of 10 usec per 4-byte access limits throughput to
  about 400Kbytes/second.  VPD is small (32K bytes at most), and most
  devices use only a fraction of that.

  We back off exponentially up to 1024 usec per iteration.  If we reach
  1024, we've already waited up to 1008 usec (16 + 32 + ... + 512), so if
  we miss an update and wait an extra 1024 usec, we can still get about
  1/2 of the device's maximum rate.
Tested-by: NShane Seymour <shane.seymour@hpe.com>
Tested-by: NBabu Moger <babu.moger@oracle.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>

This adds weak function pcibios_bus_add_device() for arch dependent
code could do proper setup. For example, powerpc could setup EEH
related resources for SRIOV VFs.
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

During EEH recovery, hotplug is applied to the devices which don't
have drivers or their drivers don't support EEH. However, the hotplug,
which was implemented based on PCI bus, can't be applied to VF directly.
Instead, we unplug and plug individual PCI devices (VFs).

This renames virtn_{add,remove}() and exports them so they can be used
in PCI hotplug during EEH recovery.
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Log successful error injections so that injected errors can be
differentiated from real errors.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>

The aer_inject driver is very quiet.  In most cases, it merely returns an
error code to user-space, leaving the user with little clue about the
actual reason for the failure.

So, log error messages for 4 of the most frequent causes of failure:
* Can't find the root port of the specified device.
* Device doesn't support AER.
* Root port doesn't support AER.
* AER device not found.

This gives the user a chance to understand why aer-inject failed.

Based on a preliminary patch by Thomas Renninger.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
CC: Thomas Renninger <trenn@suse.de>

dev_warn() is better than printk(LOG_WARNING...) as it records which device
the message relates to.  Also add a prefix "aer_inject:" to help
differentiate real errors from injected errors.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>

EPERM means "Operation not permitted", which doesn't reflect the lack of
support for AER.  EPROTONOSUPPORT (Protocol not supported) is a better
choice of error code if the device or its root port lack support for AER.

Likewise, EINVAL means "Invalid argument", which is not suitable for cases
where the AER error device is missing or unusable.  ENODEV and
EPROTONOSUPPORT, respectively, fit better.
Suggested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
CC: Prarit Bhargava <prarit@redhat.com>

BARs are disabled when the size register is 0, so it's misleading to write
a base address into the start register.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Track the offsets of the bus -> CPU mapping for I/O and memory.  This is
cosmetic for current Tegra chips because the offset is always 0.  But to
properly support legacy use-cases, like VGA, this would be needed so that
PCI bus addresses can be relocated.

While at it, also request the I/O resource both in physical memory and I/O
space to make /proc/iomem consistent, as well as add the I/O region to the
list of host bridge resources.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The num_ports field of the tegra_pcie structure is never used so remove it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The configuration space mapping on Tegra is somewhat special, and in order
to avoid wasting virtual address space the configuration space for each bus
needs to be stitched together from several blocks which form a single
continuous virtual address range for accessors.

Currently the configuration space is mapped upon the first access to one of
its registers.  However, the mapping operation may sleep under certain
circumstances, so doing it from the configuration space accessors (they are
protected by a spin lock) will trigger a warning.

To avoid the warning, use the ->add_bus() callback to perform the mapping
at enumeration time when the operation is allowed to sleep.  Also add an
implementation of ->remove_bus() that undoes the mapping established by the
->add_bus() callback.  While it isn't currently possible to unload the
module, there is work underway to remedy this, and this code will come in
handy when that happens.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add pci_ops.{add,remove}_bus() callbacks, which will be called on every
newly created bus and when a bus is being removed, respectively.  This can
be used by drivers to implement driver-specific initialization and teardown
of the bus, in addition to the architecture-specifics implemented by the
pcibios_add_bus() and the pcibios_remove_bus() functions.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/hotplug/Kconfig.

Note that this effectively adds pci/hotplug/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/hotplug/Kconfig:

  alpha
  arm
  avr32
  frv
  m68k
  microblaze
  mn10300
  sparc
  unicore32

Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/pcie/Kconfig.

Note that this effectively adds pci/pcie/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/pcie/Kconfig:

  alpha
  avr32
  blackfin
  frv
  m32r
  m68k
  microblaze
  mn10300
  parisc
  sparc
  unicore32
  xtensa

[bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace]
Signed-off-by: NSasa Bogicevic <brutallesale@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Modify the Microblaze PCI subsystem to work with the generic
drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq.

[bhelgaas: changelog]
Signed-off-by: NBharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: NRavi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMichal Simek <michal.simek@xilinx.com>