- 29 9月, 2012 8 次提交
-
-
由 Trond Myklebust 提交于
If we sleep after dropping the inode->i_lock, then we are no longer atomic with respect to the rpc_wake_up() call in pnfs_layout_remove_lseg(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
In cases where the pNFS data server is just temporarily out of service, we want to mark it as such, and then try again later. Typically that will be in cases of network connection errors etc. This patch allows us to mark the devices as being "unavailable" for such transient errors, and will make them available for retries after a 2 minute timeout period. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If we had to fall back to read/write through MDS, then assume that we should retry pNFS after a suitable timeout period. The following patch sets a timeout of 2 minutes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and make them local to the pnfs.c file. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we do return errors from nfs4_proc_layoutget() and that we don't mark the layout as having failed if the error was due to a signal or resource problem on the client side. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 03 8月, 2012 2 次提交
-
-
由 Idan Kedar 提交于
since the only user of nfs4_proc_layoutget is send_layoutget, which ignores its return value, there is no reason to return any value. Signed-off-by: NIdan Kedar <idank@tonian.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Idan Kedar 提交于
we have encountered a bug whereby reading a lot of files (copying fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused a general protection fault in xdr_shrink_bufhead. this function is called when decoding the response from LAYOUTGET. the decoding is done by a worker thread, and the caller of LAYOUTGET waits for the worker thread to complete. hitting Ctrl+C caused the synchronous wait to end and the next thing the caller does is to free the pages, so when the worker thread calls xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these pages has been moved to nfs4_layoutget_release. Signed-off-by: NIdan Kedar <idank@tonian.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 7月, 2012 1 次提交
-
-
由 Andy Adamson 提交于
When the file layout driver is fencing a DS, _pnfs_return_layout can be called mulitple times per inode due to in-flight i/o referencing lsegs on it's plh_segs list. Remember that LAYOUTRETURN has been called, and do not call it again. Allow LAYOUTRETURNs after a subsequent LAYOUTGET. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 6月, 2012 2 次提交
-
-
由 Bryan Schumaker 提交于
pNFS needs to select a write function based on the layout driver currently in use, so I let each NFS version decide how to best handle initializing writes. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
pNFS needs to select a read function based on the layout driver currently in use, so I let each NFS version decide how to best handle initializing reads. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 6月, 2012 1 次提交
-
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 5月, 2012 1 次提交
-
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 5月, 2012 2 次提交
-
-
由 Andy Adamson 提交于
The "invalid layout" class of errors is handled by destroying the layout and getting a new layout from the server. Currently, the layout must be destroyed before a new layout can be obtained. This means that all references (e.g.lsegs) to the "to be destroyed" layout header must be dropped before it can be destroyed. This in turn means waiting for all in flight RPC's using the old layout as well as draining the data server session slot table wait queue. Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for the old layout to be destroyed. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
This prevents the use of any layout for i/o that references the deviceid. I/O is redirected through the MDS. Redirect the unhandled failed I/O to the MDS without marking either the layout or the deviceid invalid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 5月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
This is only when CONFIG_NFS_V4_1 isn't enabled. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Acked-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 4月, 2012 3 次提交
-
-
由 Fred Isaman 提交于
This also has the advantage that it allows directio to use pnfs. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
It is COMMIT that is handled the most differently between the paged and direct paths. Create a structure that encapsulates everything either path needs to know about the commit state. We could use void to hide some of the layout driver stuff, but Trond suggests pulling it out to ensure type checking, given the huge changes being made, and the fact that it doesn't interfere with other drivers. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Factors out the code that will need to change when directio starts using these code paths. This will allow directio to use the generic pagein and flush routines Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 3月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we conditionally drop the inode->i_lock when it is safe to do so in the commit loops. We do so after locking the nfs_page, but before removing it from the commit list. We can then use list_safe_reset_next to recover the loop after the lock is retaken. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Move more pnfs-isms out of the generic commit code. Bugfixes: - filelayout_scan_commit_lists doesn't need to get/put the lseg. In fact since it is run under the inode->i_lock, the lseg_put() can deadlock. - Ensure that we distinguish between what needs to be done for commit-to-data server and what needs to be done for commit-to-MDS using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling put_lseg() on a bucket for a struct nfs_page that got written through the MDS. - Fix a case where we were using list_del() on an nfs_page->wb_list instead of list_del_init(). - filelayout_initiate_commit needs to call filelayout_commit_release on error instead of the mds_ops->rpc_release(). Otherwise it won't clear the commit lock. Cleanups: - Let the files layout manage the commit lists for the pNFS case. Don't expose stuff like pnfs_choose_commit_list, and the fact that the commit buckets hold references to the layout segment in common code. - Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg into the pNFS layer from whence they came. - Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 11 3月, 2012 1 次提交
-
-
由 Fred Isaman 提交于
The radix tree is only being used to compile lists of reqs needing commit. It is simpler to just put the reqs directly into a list. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 27 2月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 1月, 2012 1 次提交
-
-
由 Boaz Harrosh 提交于
As mandated by the standard. In case of an IO error, a pNFS objects layout driver must return it's layout. This is because all device errors are reported to the server as part of the layout return buffer. This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR is done, through a bit flag on the pnfs_layoutdriver_type->flags member. The flag is set by the layout driver that wants a layout_return preformed at pnfs_ld_{write,read}_done in case of an error. (Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr because this code is never called outside of pnfs.c and pnfs IO paths) Without this patch 3.[0-2] Kernels leak memory and have an annoying WARN_ON after every IO error utilizing the pnfs-obj driver. [This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch] CC: Stable Tree <stable@kernel.org> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 10月, 2011 3 次提交
-
-
由 Peng Tao 提交于
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
file layout and block layout both use it to set mark layout io failure bit. So make it generic. Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 8月, 2011 8 次提交
-
-
由 Trond Myklebust 提交于
Fix two recently introduced compile problems: Fix a typo in fs/nfs/pnfs.h Move the pnfs_blksize declaration outside the CONFIG_NFS_V4 section in struct nfs_server. Reported-by: NJens Axboe <jaxboe@fusionio.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fred Isaman 提交于
Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO for each device returned. [pnfsblock: get rid of deprecated xdr macros] Signed-off-by: NJim Rees <rees@umich.edu> [pnfsblock: fix pnfs_deviceid references] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: fix print format warnings for sector_t and size_t] [pnfs-block: #include <linux/vmalloc.h>] [pnfsblock: no PNFS_NFS_SERVER] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [pnfsblock: fix bug determining size of striped volume] [pnfsblock: fix oops when using multiple devices] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: get rid of vmap and deviceid->area structure] Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
This gives layout driver a chance to cleanup structures they put in at encode_layoutcommit. Signed-off-by: NAndy Adamson <andros@netapp.com> [fixup layout header pointer for layoutcommit] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
To allow layout driver to issue getdevicelist at mount time, and clean up at umount time. [fixup non NFS_V4_1 set_pnfs_layoutdriver definition] [pnfs: pass mntfh down the init_pnfs path] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The block driver uses GETDEVICELIST Signed-off-by: NAndy Adamson <andros@netapp.com> [pass struct nfs_server * to getdevicelist] [get machince creds for getdevicelist] [fix getdevicelist decode sizing] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
There can be multiple lseg per file, so layoutcommit should be able to handle it. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
No need to save it for every lseg. No need to save it at every pnfs_set_layoutcommit. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
No need to save it for every lseg. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 7月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
...and ensure that we recoalese to take into account differences in differences in block sizes when falling back to write through the MDS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that we recoalese to take into account differences in block sizes when falling back to read through the MDS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-