- 17 4月, 2011 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 22 3月, 2011 2 次提交
-
-
由 Igor M. Liplianin 提交于
The card based on cx23885 PCI-e brige. Altera FPGA for CI, multistandard demods stv0367 from STM for QAM & OFDM, Xcieve xc5000 tuners and additional cx25840 for second analog input. Signed-off-by: NIgor M. Liplianin <liplianin@netup.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. Signed-off-by: NIgor M. Liplianin <liplianin@netup.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 29 12月, 2010 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 13 8月, 2010 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
As pointed by Randy Dunlap <randy.dunlap@oracle.com>: > ERROR: "ir_keydown" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_repeat" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_keydown" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_g_keycode_from_table" [drivers/media/IR/ir-common.ko] undefined! > > > #5101: > (.text+0x8306e2): undefined reference to `ir_core_debug' > (.text+0x830729): undefined reference to `ir_core_debug' > ir-functions.c:(.text+0x830906): undefined reference to `ir_core_debug' > (.text+0x8309d8): undefined reference to `ir_g_keycode_from_table' > (.text+0x830acf): undefined reference to `ir_core_debug' > (.text+0x830b92): undefined reference to `ir_core_debug' > (.text+0x830bef): undefined reference to `ir_core_debug' > (.text+0x830c6a): undefined reference to `ir_core_debug' > (.text+0x830cf7): undefined reference to `ir_core_debug' > budget-ci.c:(.text+0x89f5c8): undefined reference to `ir_keydown' > budget-ci.c:(.text+0x8a0c58): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a0c80): undefined reference to `__ir_input_register' > budget-ci.c:(.text+0x8a0ee0): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a11cd): undefined reference to `ir_input_unregister' > (.text+0x8a8adb): undefined reference to `ir_input_unregister' > dvb-usb-remote.c:(.text+0x8a9188): undefined reference to `get_rc_map' > dvb-usb-remote.c:(.text+0x8a91b1): undefined reference to `__ir_input_register' > dvb-usb-remote.c:(.text+0x8a9238): undefined reference to `get_rc_map' > dib0700_core.c:(.text+0x8b04ca): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ea8): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ef0): undefined reference to `ir_keydown' Those breakages seem to be caused by two bad things at IR_CORE Kconfig: 1) cx23885 is using select for IR_CORE; 2) the dvb-usb and sms dependency for IR_CORE were missing. While here, allow users to un-select IR. Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 09 8月, 2010 1 次提交
-
-
由 Andy Walls 提交于
This driver no longer depends on the old IR functions selected by VIDEO_IR. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 12月, 2009 1 次提交
-
-
由 Igor M. Liplianin 提交于
The new hardware design applied for this cards. Silicon Labs C8051F300 microcontroller is used for LNB power control. It connected to cx23885 GPIO pins: GPIO0 - P0.3 data GPIO1 - P0.2 reset GPIO2 - P0.1 clk GPIO3 - P0.0 busy Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner and M88DS3000 advanced DVB-S/S2 demodulator. Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2009 6 次提交
-
-
由 Mauro Carvalho Chehab 提交于
There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
There are still more places where DVB_FE_CUSTOMIZE is used, instead of DVB_FE_CUSTOMISE. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The name of the option is DVB_FE_CUSTOMISE. However, on a few places, a wrong name were used, due to a typo (DVB_FE_CUSTOMIZE). Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
Add support for NetUP Dual DVB-S2 CI card The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips, STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator. http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CISigned-off-by: NIgor M. Liplianin <liplianin@netup.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 12月, 2008 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
When the tuner modules were moved to common/tuners, a separate customize option were added for tuners. However, the automatic selection of the tuners were still using the older option. This causes that the automatic selection to fail, if DVB_FE_CUSTOMISE is selected. Also, since those tuners are now under MEDIA_TUNER_CUSTOMIZE menu, if you unset MEDIA_TUNER_CUSTOMIZE, you can't manually select the tuners. This patch fixes this error by replacing DVB_FE_CUSTOMISE by MEDIA_TUNER_CUSTOMIZE on all places were a tuner is selected. The patch were generated by this small script: for i in `find drivers/media -name Kconfig`; do cat $i|perl -ne 's/(MEDIA_TUNER.*)DVB_FE_CUSTOMISE/\1MEDIA_TUNER_CUSTOMIZE/; print $_' >a mv a $i done Also, manually reordered the tuner entries. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 10月, 2008 1 次提交
-
-
由 Steven Toth 提交于
This patch is on behalf of Stephen Backway <stev391@email.com>, and represents two patches I received (and some subsequent whitespace cleanup I had due to how I pulled the patches). From the original author: a) Add DVB support for the Leadtek Winfast PxDVR3200 H. b) The tuner callback previously checked the command 3 times: 1) To see if it was the XC2028_RESET_CLK 2) To see if it was not the XC2028_RESET_TUNER 3) To see if it was the XC2028_RESET_TUNER This patch removes the third check. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NStephen Backway <stev391@email.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 7月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
After commit d9b19199 (always enable FW_LOADER unless EMBEDDED=y) we can remove the FW_LOADER select's and corresponding dependencies on HOTPLUG. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 20 7月, 2008 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
VIDEOBUF_DVB depends on VIDEOBUF_CORE, not on VIDEOBUF_DMA_SG Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The new revision of this board uses the same pci subsystem id as the first revision, but uses a S5H1411 demodulator instead of the S5H1409. In the case of the FusionHDTV7 Dual Express, if s5h1409_attach fails, try s5h1411_attach. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 14 5月, 2008 4 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the previous behaviour before the creation of MEDIA_TUNER. Before this patch, tuner.ko were created even for drivers that don't need a tuner (like webcam drivers). Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The cx23885 driver used to use dvb-pll for LG-TDVS-H064F support on the FusionHDTV5 Express. This has since been converted to use tuner-simple instead, once digital tuning support was added to tuner-simple. Since cx23885 no longer uses dvb-pll, remove the #include "dvb-pll.h", and the DVB_PLL Kconfig selection. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Thanks to Ingo Molnar for finding this. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 30 4月, 2008 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
namespace for all of them.
-
- 25 4月, 2008 1 次提交
-
-
由 Steven Toth 提交于
This adds support for DVB-T mode only, analog mode is not supported. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 1月, 2008 3 次提交
-
-
由 Michael Krufky 提交于
Everybody forgets to add the Kconfig stuff after they add new card support :-/ Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 12月, 2007 1 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 05 11月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 6 次提交
-
-
由 Michael Krufky 提交于
fix bad Kconfig dependency of cx23885 module. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Thanks to Michael Krufky for pointing this to me. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Fix the following dependency issue: ERROR: "dvb_dmx_init" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_unregister_adapter" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_register_frontend" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_unregister_frontend" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_net_release" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_frontend_detach" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmxdev_release" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmx_swfilter" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_net_init" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmx_release" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_register_adapter" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmxdev_init" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "mt2131_attach" [drivers/media/video/cx23885/cx23885.ko] undefined! ERROR: "s5h1409_attach" [drivers/media/video/cx23885/cx23885.ko] undefined! Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
VIDEO_CX23885 must select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 Express Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
This is a new framework to support boards based on the CX23885/7 PCIe bridge. The framework supports digital (no analog yet) Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-