The performance drop if the default TDP more than 256 Watt
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Two nouveau crasher/deadlock fixes.

* 'linux-4.17' of git://github.com/skeggsb/linux:
  drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
  drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client

Currently; we're grabbing all of the modesetting locks before adding MST
connectors to fbdev. This isn't actually necessary, and causes a
deadlock as well:

======================================================
WARNING: possible circular locking dependency detected
4.17.0-rc3Lyude-Test+ #1 Tainted: G           O
------------------------------------------------------
kworker/1:0/18 is trying to acquire lock:
00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]

but task is already holding lock:
00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (crtc_ww_class_mutex){+.+.}:
       ww_mutex_lock+0x43/0x80
       drm_modeset_lock+0x71/0x130 [drm]
       drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper]
       drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper]
       __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
       nouveau_fbcon_init+0x138/0x1a0 [nouveau]
       nouveau_drm_load+0x173/0x7e0 [nouveau]
       drm_dev_register+0x134/0x1c0 [drm]
       drm_get_pci_dev+0x8e/0x160 [drm]
       nouveau_drm_probe+0x1a9/0x230 [nouveau]
       pci_device_probe+0xcd/0x150
       driver_probe_device+0x30b/0x480
       __driver_attach+0xbc/0xe0
       bus_for_each_dev+0x67/0x90
       bus_add_driver+0x164/0x260
       driver_register+0x57/0xc0
       do_one_initcall+0x4d/0x323
       do_init_module+0x5b/0x1f8
       load_module+0x20e5/0x2ac0
       __do_sys_finit_module+0xb7/0xd0
       do_syscall_64+0x60/0x1b0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #2 (crtc_ww_class_acquire){+.+.}:
       drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper]
       drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper]
       __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
       nouveau_fbcon_init+0x138/0x1a0 [nouveau]
       nouveau_drm_load+0x173/0x7e0 [nouveau]
       drm_dev_register+0x134/0x1c0 [drm]
       drm_get_pci_dev+0x8e/0x160 [drm]
       nouveau_drm_probe+0x1a9/0x230 [nouveau]
       pci_device_probe+0xcd/0x150
       driver_probe_device+0x30b/0x480
       __driver_attach+0xbc/0xe0
       bus_for_each_dev+0x67/0x90
       bus_add_driver+0x164/0x260
       driver_register+0x57/0xc0
       do_one_initcall+0x4d/0x323
       do_init_module+0x5b/0x1f8
       load_module+0x20e5/0x2ac0
       __do_sys_finit_module+0xb7/0xd0
       do_syscall_64+0x60/0x1b0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #1 (&dev->mode_config.mutex){+.+.}:
       drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper]
       __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
       nouveau_fbcon_init+0x138/0x1a0 [nouveau]
       nouveau_drm_load+0x173/0x7e0 [nouveau]
       drm_dev_register+0x134/0x1c0 [drm]
       drm_get_pci_dev+0x8e/0x160 [drm]
       nouveau_drm_probe+0x1a9/0x230 [nouveau]
       pci_device_probe+0xcd/0x150
       driver_probe_device+0x30b/0x480
       __driver_attach+0xbc/0xe0
       bus_for_each_dev+0x67/0x90
       bus_add_driver+0x164/0x260
       driver_register+0x57/0xc0
       do_one_initcall+0x4d/0x323
       do_init_module+0x5b/0x1f8
       load_module+0x20e5/0x2ac0
       __do_sys_finit_module+0xb7/0xd0
       do_syscall_64+0x60/0x1b0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #0 (&helper->lock){+.+.}:
       __mutex_lock+0x70/0x9d0
       drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
       nv50_mstm_register_connector+0x2c/0x50 [nouveau]
       drm_dp_add_port+0x2f5/0x420 [drm_kms_helper]
       drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
       drm_dp_add_port+0x33f/0x420 [drm_kms_helper]
       drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
       drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper]
       drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper]
       process_one_work+0x20d/0x650
       worker_thread+0x3a/0x390
       kthread+0x11e/0x140
       ret_from_fork+0x3a/0x50

other info that might help us debug this:
Chain exists of:
  &helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex
 Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock(crtc_ww_class_mutex);
                               lock(crtc_ww_class_acquire);
                               lock(crtc_ww_class_mutex);
  lock(&helper->lock);

 *** DEADLOCK ***
5 locks held by kworker/1:0/18:
 #0: 000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650
 #1: 00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650
 #2: 00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm]
 #3: 00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm]
 #4: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm]

stack backtrace:
CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G           O      4.17.0-rc3Lyude-Test+ #1
Hardware name: Gateway FX6840/FX6840, BIOS P01-A3         05/17/2010
Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
Call Trace:
 dump_stack+0x85/0xcb
 print_circular_bug.isra.38+0x1ce/0x1db
 __lock_acquire+0x128f/0x1350
 ? lock_acquire+0x9f/0x200
 ? lock_acquire+0x9f/0x200
 ? __ww_mutex_lock.constprop.13+0x8f/0x1000
 lock_acquire+0x9f/0x200
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 __mutex_lock+0x70/0x9d0
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 ? ww_mutex_lock+0x43/0x80
 ? _cond_resched+0x15/0x30
 ? ww_mutex_lock+0x43/0x80
 ? drm_modeset_lock+0xb2/0x130 [drm]
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 nv50_mstm_register_connector+0x2c/0x50 [nouveau]
 drm_dp_add_port+0x2f5/0x420 [drm_kms_helper]
 ? mark_held_locks+0x50/0x80
 ? kfree+0xcf/0x2a0
 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper]
 ? trace_hardirqs_on_caller+0xed/0x180
 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper]
 drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
 drm_dp_add_port+0x33f/0x420 [drm_kms_helper]
 ? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau]
 ? find_held_lock+0x2d/0x90
 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper]
 ? __mutex_unlock_slowpath+0x3b/0x280
 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper]
 drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
 drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper]
 drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper]
 process_one_work+0x20d/0x650
 worker_thread+0x3a/0x390
 ? process_one_work+0x650/0x650
 kthread+0x11e/0x140
 ? kthread_create_worker_on_cpu+0x50/0x50
 ret_from_fork+0x3a/0x50

Taking example from i915, the only time we need to hold any modesetting
locks is when changing the port on the mstc, and in that case we only
need to hold the connection mutex.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Potentially responsible for some random OOPSes.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [v4.15+]

A little bigger than normal since this is two weeks of fixes.
- Atom firmware table updates for vega12
- Fix fallout from huge page support
- Fix up smu7 power profile interface to be consistent with vega
- Misc other fixes

* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/pp: Refine the output of pp_power_profile_mode on VI
  drm/amdgpu: Switch to interruptable wait to recover from ring hang.
  drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages
  drm/amd/display: Use kvzalloc for potentially large allocations
  drm/amd/display: Don't return ddc result and read_bytes in same return value
  drm/amd/display: Add get_firmware_info_v3_2 for VG12
  drm/amd: Add BIOS smu_info v3_3 required struct def.
  drm/amd/display: Add VG12 ASIC IDs

atomic: Clear state pointers on clear (Ville)
vc4: Fix oops in dpi disable (Eric)
omap: Various error-checking + uninitialized var fixes (Tomi)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>

* tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc:
  drm/vc4: Fix scaling of uni-planar formats
  drm/bridge/sii8620: add Kconfig dependency on extcon
  drm/omap: handle alloc failures in omap_connector
  drm/omap: add missing linefeeds to prints
  drm/omap: handle error if scale coefs are not found
  drm/omap: check return value from soc_device_match
  drm/omap: fix possible NULL ref issue in tiler_reserve_2d
  drm/omap: fix uninitialized ret variable
  drm/omap: silence unititialized variable warning
  drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge.
  drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear()
  drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()

Merge tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Increase LVDS panel timeout to 5s to avoid spurious *ERROR*
- Fix 2 WARNS: BIOS framebuffer related (FDO #105992) and eDP cdclk mismatch

* tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log
  drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout
  drm/i915: Adjust eDP's logical vco in a reliable place.

Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
- it corrects chroma_addr[1], height and vertical position values.
And trivial cleanup
- it just removes duplicated drm_bridge_attach.

* tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: hdmi: avoid duplicating drm_bridge_attach
  drm/exynos: mixer: avoid Oops in vp_video_buffer()
  drm/exynos/mixer: fix synchronization check in interlaced mode

Both ‘uninorth_remove_memory’ and ‘null_cache_flush’ can be made
static. So make them.

Silence the following gcc warning (W=1):

  drivers/char/agp/uninorth-agp.c:198:5: warning: no previous prototype for ‘uninorth_remove_memory’ [-Wmissing-prototypes]

and

  drivers/char/agp/uninorth-agp.c:473:6: warning: no previous prototype for ‘null_cache_flush’ [-Wmissing-prototypes]
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In order to keep consist with Vega,
the output format of the pp_power_profile_mode would be
<integer><mode name string>< “*” for current profile>:"detail settings"
and remove the "CURRENT" mode line.

for example:
NUM        MODE_NAME     SCLK_UP_HYST   SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL     MCLK_UP_HYST   MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
  0   3D_FULL_SCREEN:        0              100               30                0              100               10
  1     POWER_SAVING:       10                0               30                -                -                -
  2            VIDEO:        -                -                -               10               16               31
  3               VR:        0               11               50                0              100               10
  4          COMPUTE:        0                5               30                -                -                -
  5         CUSTOM *:        0                5               30                0              100               10
NUM        MODE_NAME     SCLK_UP_HYST   SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL     MCLK_UP_HYST   MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
  0   3D_FULL_SCREEN:        0              100               30                0              100               10
  1   POWER_SAVING *:       10                0               30                0              100               10
  2            VIDEO:        -                -                -               10               16               31
  3               VR:        0               11               50                0              100               10
  4          COMPUTE:        0                5               30                -                -                -
  5           CUSTOM:        -                -                -                -                -                -
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2:
Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT)
Avoid printing error message for ERESTARTSYS
Originally-by: NDavid Panariti <David.Panariti@amd.com>
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GFP_TRANSHUGE tries very hard to allocate huge pages, which can result
in long delays with high memory pressure. I have observed firefox
freezing for up to around a minute due to this while restic was taking
a full system backup.

Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT |
__GFP_NORETRY instead, in order to fail quickly when there are no huge
pages available.

Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed
up in the background if necessary.

With these changes, I'm no longer seeing freezes during a restic backup.

Cc: stable@vger.kernel.org
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allocating up to 32 physically contiguous pages can easily fail (and has
failed for me), and isn't necessary anyway.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The two ranges overlap.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When using uni-planar formats (like RGB), the scaling parameters are
stored in plane 0, not plane 1.

Fixes: fc04023f ("drm/vc4: Add support for YUV planes.")
Cc: stable@vger.kernel.org
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com

drm_bridge_attach takes care of these assignments, so there is no need
to open-code them a second time.
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to
power on` in kernel log at boot time.

Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power
on its screen during Intel i915 DRM initialization. This currently
results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for
panel to power on` message appearing in the kernel log during boot
time and when stopping the machine.

This change increases the timeout of the `intel_enable_lvds` function
from 1 to 5 seconds, letting enough time for the Satellite 930 LCD
screen to power on, and suppressing the error message from the kernel
log.

This patch has been successfully tested on Linux 4.14 running on a
Toshiba Satellite Z930.

[vsyrjala: bump the timeout from 2 to 5 seconds to match the DP
 code and properly cover the max hw timeout of ~4 seconds, and
 drop the comment about the specific machine since this is not
 a particulary surprising issue, nor specific to that one machine]
Signed-off-by: NFlorent Flament <contact@florentflament.com>
Cc: stable@vger.kernel.org
Cc: Pavel Petrovic <ppetrovic@acm.org>
Cc: Sérgio M. Basto <sergio@serjux.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414
References: https://bugzilla.kernel.org/show_bug.cgi?id=57591Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>
(cherry picked from commit 280b54ad)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

During state readout we first read out the pipe src size, store
that information in the user mode h/vdisplay, but later on we overwrite
that with the actual crtc timings. That makes our read out crtc state
inconsistent with itself when the BIOS has enabled the panel fitter to
scale the pipe contents. Let's preserve the pipe src size based
information in the user mode to make things consistent again.

This fixes a problem introduced by commit a2936e3d ("drm/i915:
Use drm_mode_get_hv_timing() to populate plane clip rectangle")
where the inconsistent state is now leading the plane clipping code
to report a failure on account the plane dst coordinates not matching
the user mode size. Previously we did the plane clipping based on
the pipe src size instead and thus never noticed the inconsistency.

The failure manifests as a WARN:
[    0.762117] [drm:intel_dump_pipe_config [i915]] requested mode:
[    0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa
...
[    0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143
...
[    0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC
[    0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0
[    0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0
[    0.764713] ------------[ cut here ]------------
[    0.764714] Could not determine valid watermarks for inherited state
[    0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915]
...

Cc: FadeMind <fademind@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: NFadeMind <fademind@gmail.com>
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Tested-by: NDave Jones <davej@codemonkey.org.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2018-April/163186.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105992
Fixes: a2936e3d ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426163015.14232-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NLarry Finger <Larry.Finger@lwfinger.net>
Tested-by: NFadeMind <fademind@gmail.com>
(cherry picked from commit bd4cd03c)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

On intel_dp_compute_config() we were calculating the needed vco
for eDP on gen9 and we stashing it in
intel_atomic_state.cdclk.logical.vco

However few moments later on intel_modeset_checks() we fully
replace entire intel_atomic_state.cdclk.logical with
dev_priv->cdclk.logical fully overwriting the logical desired
vco for eDP on gen9.

So, with wrong VCO value we end up with wrong desired cdclk, but
also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTL to verify if we configured properly the desired
frequency the CD Frequency Select bits [27:26] == 10b can mean
337.5 or 308.57 MHz depending on the VCO. So if we have wrong
VCO value stashed we will believe the frequency selection didn't
stick and start to raise WARNs of cdclk mismatch.

[   42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[   42.897269] cdclk state doesn't match!
[   42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[   42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915]
[   43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[   43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[   43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

v2: Move the entire eDP's vco logical adjustment to inside
    the skl_modeset_calc_cdclk as suggested by Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bb0f4aab ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20180502175255.5344-1-rodrigo.vivi@intel.com
(cherry picked from commit 3297234a)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

The driver can work with or without extcon framework, but if extcon is
build as module, sii8620 should be build as module as well.

Fixes: 68883844 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409062708.4326-1-a.hajda@samsung.comSigned-off-by: NSean Paul <seanpaul@chromium.org>

Handle memory allocation failures in omap_connector to avoid NULL
derefs.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-5-tomi.valkeinen@ti.comReviewed-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

A bunch of debug and error prints are missing linefeeds. Add those.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-4-tomi.valkeinen@ti.comReviewed-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

If get_scale_coef functions fail, they return NULL, but we never check
the return value and could do a NULL deref. This should not happen as we
ought to validate the amount of scaling already earlier, but to be safe,
add the necessary check.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-3-tomi.valkeinen@ti.comReviewed-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

soc_device_match() can return NULL, so add a check and fail if
soc_device_match() fails.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-2-tomi.valkeinen@ti.comReviewed-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

tiler_reserve_2d allocates memory but does not check if it got the
memory. Add the check and return ENOMEM on failure.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-2-tomi.valkeinen@ti.comReviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

audio_config function for both HDMI4 and HDMI5 return uninitialized
value as the error code if the display is not currently enabled. For
some reason this has not caused any issues.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-1-tomi.valkeinen@ti.comReviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Smatch complains that "area_free" could be used without being
initialized.  This code is several years old and premusably works fine
so this can't be a very serious bug.  But it's easy enough to silence
the warning.  If "area_free" is false at the end of the function then
we return -ENOMEM.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418142937.GA13828@mwandaSigned-off-by: NSean Paul <seanpaul@chromium.org>

In the cleanup, I didn't notice that we needed to dereference the
connector for the bus_format.  Fix the regression by looking up the
first (and only) connector attached to us, and assume that its
bus_format is what we want.  Some day it would be good to have that
part of display_info attached to the bridge, instead.

v2: Fix stray whitespace change
Signed-off-by: NEric Anholt <eric@anholt.net>
Fixes: 7b1298e0 ("drm/vc4: Switch DPI to using the panel-bridge helper.")
Link: https://patchwork.freedesktop.org/patch/msgid/20180309233256.1667-1-eric@anholt.netReviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Clear the old_state and new_state pointers for private objects
in drm_atomic_state_default_clear(). We don't actually have
functions to get the new/old state for private objects so
getting access to the potentially stale pointers requires a
bit more manual labour than for other object types. But let's
clear the pointers for private objects as well, if only to
avoid future surprises when someone decides to add the functions
to get at them.

v2: Split private objs to a separate patch (Daniel)

Cc: <stable@vger.kernel.org> # v4.14+
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Abhay Kumar <abhay.kumar@intel.com>
Fixes: a4370c77 (drm/atomic: Make private objs proper objects)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Clear the old_state and new_state pointers for every object in
drm_atomic_state_default_clear(). Otherwise
drm_atomic_get_{new,old}_*_state() will hand out stale pointers to
anyone who hasn't first confirmed that the object is in fact part of
the current atomic transcation, if they are called after we've done
the ww backoff dance while hanging on to the same drm_atomic_state.

For example, handle_conflicting_encoders() looks like it could hit
this since it iterates the full connector list and just calls
drm_atomic_get_new_connector_state() for each.

And I believe we have now witnessed this happening at least once in
i915 check_digital_port_conflicts(). Commit 8b69449d ("drm/i915:
Remove last references to drm_atomic_get_existing* macros") changed
the safe drm_atomic_get_existing_connector_state() to the unsafe
drm_atomic_get_new_connector_state(), which opened the doors for
this particular bug there as well.

v2: Split private objs out to a separate patch (Daniel)

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Abhay Kumar <abhay.kumar@intel.com>
Fixes: 581e49fe ("drm/atomic: Add new iterators over all state, v3.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Pll KVM fixes from Radim Krčmář:
 "ARM:
   - Fix proxying of GICv2 CPU interface accesses
   - Fix crash when switching to BE
   - Track source vcpu git GICv2 SGIs
   - Fix an outdated bit of documentation

  x86:
   - Speed up injection of expired timers (for stable)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: remove APIC Timer periodic/oneshot spikes
  arm64: vgic-v2: Fix proxying of cpuif access
  KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance
  KVM: arm64: Fix order of vcpu_write_sys_reg() arguments
  KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI

Pull iommu fixes from Joerg Roedel:

 - fix a compile warning in the AMD IOMMU driver with irq remapping
   disabled

 - fix for VT-d interrupt remapping and invalidation size (caused a
   BUG_ON when trying to invalidate more than 4GB)

 - build fix and a regression fix for broken graphics with old DTS for
   the rockchip iommu driver

 - a revert in the PCI window reservation code which fixes a regression
   with VFIO.

* tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: rockchip: fix building without CONFIG_OF
  iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb()
  iommu/vt-d: fix shift-out-of-bounds in bug checking
  iommu/dma: Move PCI window region reservation back into dma specific path.
  iommu/rockchip: Make clock handling optional
  iommu/amd: Hide unused iommu_table_lock
  iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()

Pull x86 fix from Thomas Gleixner:
 "Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when
  the evaluation of physical and virtual bits which uses the same CPUID
  leaf was moved out of get_cpu_cap()"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Restore CPUID_8000_0008_EBX reload

Pull clocksource fixes from Thomas Gleixner:
 "The recent addition of the early TSC clocksource breaks on machines
  which have an unstable TSC because in case that TSC is disabled, then
  the clocksource selection logic falls back to the early TSC which is
  obviously bogus.

  That also unearthed a few robustness issues in the clocksource
  derating code which are addressed as well"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Rework stale comment
  clocksource: Consistent de-rate when marking unstable
  x86/tsc: Fix mark_tsc_unstable()
  clocksource: Initialize cs->wd_list
  clocksource: Allow clocksource_mark_unstable() on unregistered clocksources
  x86/tsc: Always unregister clocksource_tsc_early

Pull irq fix from Thomas Gleixner:
 "A single fix to prevent false positives in the spurious interrupt
  detector when more than a single demultiplex register is evaluated in
  the Qualcom irq combiner driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/qcom: Fix check for spurious interrupts

Pull x86 platform driver fixes from Darren Hart:

 - We missed a case in the Dell config dependencies resulting in a
   possible bad configuration, resolve it by giving up on trying to keep
   DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS.

 - Fix a null pointer dereference at module unload for the asus-wireless
   driver.

* tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: Kconfig: Fix dell-laptop dependency chain.
  platform/x86: asus-wireless: Fix NULL pointer dereference