When a device DMA window includes the address 0, it's reserved in the
TCE bitmap to avoid returning that address to drivers.

When the device is removed, the bitmap is checked for any mappings not
removed by the driver, indicating a possible DMA mapping leak. Since the
reserved address is not cleared, a message is printed, warning of such a
leak.

Check for the reservation, and clear it before checking for any other
standing mappings.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

ppc -> powerpc
Signed-off-by: NThomas Waldecker <thomas.waldecker@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds DAWR supoprt to the set_break().

It does both bare metal and PAPR versions of setting the DAWR.

There is still some work we can do to make full use of the watchpoint but that
will come later.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is a rewrite so that we don't assume we are using the DABR throughout the
code.  We now use the arch_hw_breakpoint to store the breakpoint in a generic
manner in the thread_struct, rather than storing the raw DABR value.

The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from
userspace.  We keep this functionality, so that future changes (like the POWER8
DAWR), will still fake the DABR to userspace.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

.. and add it to POWER8 cpu features.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These are just wrappers around the new set_mode HCALL.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This frees up 7 bits for crazy new CPU features.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These are 32 bit, so no need to have a bunch of wasted 0s.

The 0s saved here can be put to better use elsewhere, like at the end of my pay
check.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Avoid load of static chain register when calling nested functions through a pointer on 64bit

The ppc64 ABI has a static chain register (r11) which is only used
when calling nested functions through a pointer. Considering that
we take a dim view of nested functions in the kernel, we have a lot
of unnecessary overhead here.

gcc 4.7 has an option to disable loading of r11 so lets use it.

If hell freezes over and hipsters manage to litter the kernel
with nested functions, gcc will give us an error message and
won't simply compile bad code:

    You cannot take the address of a nested function if you use
    the -mno-pointers-to-nested-functions option.

Furthermore our kernel module trampolines don't setup the static
chain register so adding this option and forcing gcc to error out
makes even more sense.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig

We need devtmpfs enabled to boot on recent versions of Fedora. EFI
partitions will be useful for large block devices. tmpfs ACL support
is used by some distros for managing access to devices.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17
and RHEL6) as well as the x86 defconfigs. Userspace these days is
most likely to expect utf8 anyway.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No changes, just update the configs with savedefconfig.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use the new vsprintf extension to avoid any possible
message interleaving.

Convert the #ifdef DEBUG block to a single pr_debug.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 6/6] powerpc: Implement PPR save/restore

When the task enters in to kernel space, the user defined priority (PPR)
will be saved in to PACA at the beginning of first level exception
vector and then copy from PACA to thread_info in second level vector.
PPR will be restored from thread_info before exits the kernel space.

P7/P8 temporarily raises the thread priority to higher level during
exception until the program executes HMT_* calls. But it will not modify
PPR register. So we save PPR value whenever some register is available
to use and then calls HMT_MEDIUM to increase the priority. This feature
supports on P7 or later processors.

We save/ restore PPR for all exception vectors except system call entry.
GLIBC will be saving / restore for system calls. So the default PPR
value (3) will be set for the system call exit when the task returned
to the user space.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 5/6] powerpc: Macros for saving/restore PPR

Several macros are defined for saving and restore user defined PPR value.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 4/6] powerpc: Define ppr in thread_struct

ppr in thread_struct is used to save PPR and restore it before process exits
from kernel.

This patch sets the default priority to 3 when tasks are created such
that users can use 4 for higher priority tasks.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 3/6] powerpc: Increase exceptions arrays in paca struct to save PPR

Using paca to save user defined PPR value in the first level exception vector.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 2/6] powerpc: Enable PPR save/restore

SMT thread status register (PPR) is used to set thread priority. This patch
enables PPR save/restore feature (CPU_FTR_HAS_PPR) on POWER7 and POWER8 systems.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 1/6] powerpc: Move branch instruction from ACCOUNT_CPU_USER_ENTRY to caller

The first instruction in ACCOUNT_CPU_USER_ENTRY is 'beq' which checks for
exceptions coming from kernel mode. PPR value will be saved immediately after
ACCOUNT_CPU_USER_ENTRY and is also for user level exceptions. So moved this
branch instruction in the caller code.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Support for stalled-cycles-frontend and stalled-cycles-backend is
added for e500-based processors.

The following mappings are used:

stalled-cycles-frontend or idle-cycles-frontend:
Com:18 Cycles decode stalled

stalled-cycles-backend or idle-cycles-backend
Com:19 cycles issue stalled
Signed-off-by: NChris Freehill <chrisf@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

By using the compiler intrinsics instead of hand-crafted opaque inline
assembler for byte-swapping, we let the compiler see what's actually
happening and it gets to use lwbrx/stwbrx instructions instead of a
normal load/store coupled with a sequence of rlwimi instructions to
move bits around.

Compiled-tested only. It gave a code size reduction of almost 4% for
ext2, and more like 2.5% for ext3/ext4.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use for_each_compatible_node() macro instead of open coding it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use for_each_compatible_node() macro instead of open coding it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use for_each_compatible_node() macro instead of open coding it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

For PR KVM we allow userspace to map 0xc000000000000000. Because
transitioning from userspace to the guest kernel may use the relocated
exception vectors we have to disable relocation on exceptions whenever
PR KVM is active as we cannot trust that address.

This issue does not apply to HV KVM, since changing from a guest to the
hypervisor will never use the relocated exception vectors.

Currently the hypervisor interface only allows us to toggle relocation
on exceptions on a partition wide scope, so we need to globally disable
relocation on exceptions when the first PR KVM instance is started and
only re-enable them when all PR KVM instances have been destroyed.

It's a bit heavy handed, but until the hypervisor gives us a lightweight
way to toggle relocation on exceptions on a single thread it's only real
option.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Motivation:
IBM Blue Gene/Q comes with some very strange firmware that I'm trying to get out
of using in the kernel.  So instead I spin all the threads in the boot wrapper
(using the firmware) and have them enter the kexec stub, pre-translated at the
virtual "linear" address, never touching firmware again.

This works strategy works wonderfully, but I need the following patch in the
kexec stub. I believe it should not effect Book3S and Book3E does not appear
to be here yet so I'd love to get any criticisms up front.

This patch adds two items:

1) Book3e requires that GPR4 survive the "hold" process, so we make
   sure that happens.
2) Book3e has no real mode, and the hold code exploits this.  Since
   these processors ares always translated, we arrange for the kexeced
   threads to enter the hold code using the normal kernel linear mapping.
Signed-off-by: NJimi Xenidis <jimix@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use for_each_node_by_type() macro instead of open coding it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch fixes MAX_STACK_TRACE_ENTRIES too low warning for ppc32,
which is similar to commit 12660b17.
Reported-by: NChristian Kujau <lists@nerdbynature.de>
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Tested-by: NChristian Kujau <lists@nerdbynature.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Finally remove the two level TOC and build with -mcmodel=medium.

Unfortunately we can't build modules with -mcmodel=medium due to
the tricks the kernel module loader plays with percpu data:

# -mcmodel=medium breaks modules because it uses 32bit offsets from
# the TOC pointer to create pointers where possible. Pointers into the
# percpu data area are created by this method.
#
# The kernel module loader relocates the percpu data section from the
# original location (starting with 0xd...) to somewhere in the base
# kernel percpu data space (starting with 0xc...). We need a full
# 64bit relocation for this to work, hence -mcmodel=large.

On older kernels we fall back to the two level TOC (-mminimal-toc)
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Now we relocate prom_init.c on 64bit we can finally remove the
nasty RELOC() macro.

Finally a patch that I can claim has a net positive effect on
the kernel. It doesn't happen very often.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The ppc64 kernel can get loaded at any address which means
our very early init code in prom_init.c must be relocatable. We do
this with a pretty nasty RELOC() macro that we wrap accesses of
variables with. It is very fragile and sometimes we forget to add a
RELOC() to an uncommon path or sometimes a compiler change breaks it.

32bit has a much more elegant solution where we build prom_init.c
with -mrelocatable and then process the relocations manually.
Unfortunately we can't do the equivalent on 64bit and we would
have to build the entire kernel relocatable (-pie), resulting in a
large increase in kernel footprint (megabytes of relocation data).
The relocation data will be marked __initdata but it still creates
more pressure on our already tight memory layout at boot.

Alan Modra pointed out that the 64bit ABI is relocatable even
if we don't build with -pie, we just need to relocate the TOC.
This patch implements that idea and relocates the TOC entries of
prom_init.c. An added bonus is there are very few relocations to
process which helps keep boot times on simulators down.

gcc does not put 64bit integer constants into the TOC but to be
safe we may want a build time script which passes through the
prom_init.c TOC entries to make sure everything looks reasonable.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Enable PRINTK_TIME in pasemi_defconfig. Also regenerate it, it seems
that a lot of options have moved around since last time savedefconfig
was ran on it.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The third argument for of_get_property() is a pointer, hence pass
NULL instead of 0.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Change the representation of the PMU flags from decimal to hex since they
are bitfields which are easier to read in hex.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch actually hooks up doorbell interrupts on POWER8:

- Select the PPC_DOORBELL Kconfig option from PPC_PSERIES

- Add the doorbell CPU feature bit to POWER8

- We define a new pSeries_cause_ipi_mux() function that issues a
  doorbell interrupt if the recipient is another thread within the same
  core as the sender. If the recipient is in a different core it falls
  back to using XICS to deliver the IPI as before.

- During pSeries_smp_probe() at boot, we check if doorbell interrupts
  are supported. If they are we set the cause_ipi function pointer to
  the above mentioned function, otherwise we leave it as whichever XICS
  cause_ipi function was determined by xics_smp_probe().
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Move the rule to build doorbell support out of the Makefile and into a
new Kconfig boolean that platforms can select.

We will add doorbell support to pseries as well in the next patch.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch adds the logic to properly handle doorbells that come in when
interrupts have been soft disabled and to replay them when interrupts
are re-enabled:

- masked_##_H##interrupt is modified to leave interrupts enabled when a
  doorbell has come in since doorbells are edge sensitive and as such
  won't be automatically re-raised.

- __check_irq_replay now tests if a doorbell happened on book3s, and
  returns either 0xe80 or 0xa00 depending on whether we are the
  hypervisor or not.

- restore_check_irq_replay now tests for the two possible server
  doorbell vector numbers to replay.

- __replay_interrupt also adds tests for the two server doorbell vector
  numbers, and is modified to use a compare instruction rather than an
  andi. on the single bit difference between 0x500 and 0x900.

The last two use a CPU feature section to avoid needlessly testing
against the hypervisor vector if it is not the hypervisor, and vice
versa.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On book3s we have two msgsnd instructions with differing privilege
levels. This patch selects the appropriate instruction to use whenever
we send a doorbell interrupt.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Directed Privileged Doorbell Interrupts come in at 0xa00 (or
0xc000000000004a00 if relocation on exception is enabled), so add
exception vectors at these locations.

If doorbell support is not compiled in we handle it as an
unknown_exception.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>