- 23 2月, 2010 1 次提交
-
-
由 stephen hemminger 提交于
Get rid of custom locking that was using wait queue, lock, and atomic to basically build a queued mutex. Use RCU for read side. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 2月, 2010 3 次提交
-
-
由 Jamal Hadi Salim 提交于
To see the effect make sure you have an empty SPD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm policy flush" You get prompt back in window2 and you see the flush event on window1. With this fix, you still get prompt on window1 but no event on window2. Thanks to Alexey Dobriyan for finding a bug in earlier version when using pfkey to do the flushing. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
To see the effect make sure you have an empty SAD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm state flush" You get prompt back in window2 and you see the flush event on window1. With this fix, you still get prompt on window1 but no event on window2. Thanks to Alexey Dobriyan for finding a bug in earlier version when using pfkey to do the flushing. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
RFC 2367 says flushing behavior should be: 1) user space -> kernel: flush 2) kernel: flush 3) kernel -> user space: flush event to ALL listeners This is not realistic today in the presence of selinux policies which may reject the flush etc. So we make the sequence become: 1) user space -> kernel: flush 2) kernel: flush 3) kernel -> user space: flush response to originater from #1 4) if there were no errors then: kernel -> user space: flush event to ALL listeners Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2010 1 次提交
-
-
由 David S. Miller 提交于
As reported by Alexey Dobriyan: -------------------- setkey now takes several seconds to run this simple script and it spits "recv: Resource temporarily unavailable" messages. #!/usr/sbin/setkey -f flush; spdflush; add A B ipcomp 44 -m tunnel -C deflate; add B A ipcomp 45 -m tunnel -C deflate; spdadd A B any -P in ipsec ipcomp/tunnel/192.168.1.2-192.168.1.3/use; spdadd B A any -P out ipsec ipcomp/tunnel/192.168.1.3-192.168.1.2/use; -------------------- Obviously applications want the events even when the table is empty. So we cannot make this behavioral change. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2010 2 次提交
-
-
由 jamal 提交于
Observed similar behavior on SPD as previouly seen on SAD flushing.. This fixes it. cheers, jamal commit 428b20432dc31bc2e01a94cd451cf5a2c00d2bf4 Author: Jamal Hadi Salim <hadi@cyberus.ca> Date: Thu Feb 11 05:49:38 2010 -0500 xfrm: Flushing empty SPD generates false events To see the effect make sure you have an empty SPD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm policy flush" You get prompt back in window1 and you see the flush event on window2. With this fix, you still get prompt on window1 but no event on window2. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 jamal 提交于
To see the effect make sure you have an empty SAD. -On window1 "ip xfrm mon" -on window2 issue "ip xfrm state flush" You get prompt back in window1 and you see the flush event on window2. With this fix, you still get prompt on window1 but no event on window2. I was tempted to return -ESRCH on window1 (which would show "RTNETLINK answers: No such process") but didnt want to change current behavior. cheers, jamal commit 5f3dd4a772326166e1bcf54acc2391df00dc7ab5 Author: Jamal Hadi Salim <hadi@cyberus.ca> Date: Thu Feb 11 04:41:36 2010 -0500 xfrm: Flushing empty SAD generates false events To see the effect make sure you have an empty SAD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm state flush" You get prompt back in window1 and you see the flush event on window2. With this fix, you still get prompt on window1 but no event on window2. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2010 1 次提交
-
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
1. After sock_register() returns, it's possible to create sockets, even if module still not initialized fully (blame generic module code for that!) 2. Consequently, pfkey_create() can be called with pfkey_net_id still not initialized which will BUG_ON in net_generic(): kernel BUG at include/net/netns/generic.h:43! 3. During netns shutdown, netns ops should be unregistered after key manager unregistered because key manager calls can be triggered from xfrm_user module: general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC pfkey_broadcast+0x111/0x210 [af_key] pfkey_send_notify+0x16a/0x300 [af_key] km_state_notify+0x41/0x70 xfrm_flush_sa+0x75/0x90 [xfrm_user] 4. Unregister netns ops after socket ops just in case and for symmetry. Reported by Luca Tettamanti. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Tested-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 2月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Use atomic_inc_return() in get_acqseq() to avoid taking a spinlock Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
__net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2009 1 次提交
-
-
由 Martin Willi 提交于
Commit 4447bb33 ("xfrm: Store aalg in xfrm_state with a user specified truncation length") breaks installation of authentication algorithms via PF_KEY, as the state specific truncation length is not installed with the algorithms default truncation length. This patch initializes state properly to the default if installed via PF_KEY. Signed-off-by: NMartin Willi <martin@strongswan.org> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2009 1 次提交
-
-
由 Eric W. Biederman 提交于
Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2009 1 次提交
-
-
由 Eric Paris 提交于
The generic __sock_create function has a kern argument which allows the security system to make decisions based on if a socket is being created by the kernel or by userspace. This patch passes that flag to the net_proto_family specific create function, so it can do the same thing. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2009 1 次提交
-
-
由 Neil Horman 提交于
Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 97775007 (my af packet cmsg patch) is reverted Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
All usages of structure net_proto_ops should be declared const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2009 2 次提交
-
-
由 Stephen Hemminger 提交于
All instances of file_operations should be const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
commit 2b85a34e (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. We need to take into account this offset when reporting sk_wmem_alloc to user, in PROC_FS files or various ioctls (SIOCOUTQ/TIOCOUTQ) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 2月, 2009 1 次提交
-
-
由 Wei Yongjun 提交于
Remove some pointless conditionals before kfree_skb(). Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2009 1 次提交
-
-
由 Timo Teras 提交于
Currently encap_oa is left uninitialized, so it contains garbage data which is visible to userland via Netlink. Initialize it by zeroing it out. Signed-off-by: NTimo Teras <timo.teras@iki.fi> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2008 14 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
* interaction with userspace -- take netns from userspace socket. * in ->notify hook take netns either from SA or explicitly passed -- we don't know if SA/SPD flush is coming. * stub policy migration with init_net for now. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
* netns boilerplate * keep per-netns socket list * keep per-netns number of sockets Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
SA and SPD flush are executed with NULL SA and SPD respectively, for these cases pass netns explicitly from userspace socket. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Add netns parameter to xfrm_policy_bysel_ctx(), xfrm_policy_byidx(). Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Again, to avoid complications with passing netns when not necessary. Again, ->xp_net is set-once field, once set it never changes. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Disallow spurious wakeups in __xfrm_lookup(). Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
To avoid unnecessary complications with passing netns around. * set once, very early after allocating * once set, never changes For a while create every xfrm_state in init_net. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 11月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
xfrm_policy_destroy() will oops if not dead policy is passed to it. On error path in pfkey_compile_policy() exactly this happens. Oopsable for CAP_NET_ADMIN owners. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
Steps to reproduce: #/usr/sbin/setkey -f flush; spdflush; add 192.168.0.42 192.168.0.1 ah 24500 -A hmac-md5 "1234567890123456"; add 192.168.0.42 192.168.0.1 esp 24501 -E 3des-cbc "123456789012123456789012"; spdadd 192.168.0.42 192.168.0.1 any -P out ipsec esp/transport//require ah/transport//require; setkey: invalid keymsg length Policy dump will bail out with the same message after that. -recv(4, "\2\16\0\0\32\0\3\0\0\0\0\0\37\r\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 +recv(4, "\2\16\0\0\36\0\3\0\0\0\0\0H\t\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2008 1 次提交
-
-
由 Tobias Brunner 提交于
When deleting an SPD entry using SADB_X_SPDDELETE, c.data.byid is not initialized to zero in pfkey_spddelete(). Thus, key_notify_policy() responds with a PF_KEY message of type SADB_X_SPDDELETE2 instead of SADB_X_SPDDELETE. Signed-off-by: NTobias Brunner <tobias.brunner@strongswan.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2008 1 次提交
-
-
由 Arnaud Ebalard 提交于
Provides implementation of the enhancements of XFRM/PF_KEY MIGRATE mechanism specified in draft-ebalard-mext-pfkey-enhanced-migrate-00. Defines associated PF_KEY SADB_X_EXT_KMADDRESS extension and XFRM/netlink XFRMA_KMADDRESS attribute. Signed-off-by: NArnaud Ebalard <arno@natisbad.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-