Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 23 10月, 2009 1 次提交
    • F
      perf tools: Drop asm/types.h wrapper · 802da5f2
      由 Frederic Weisbecker 提交于 
      Wrapping the kernel headers is dangerous when it comes to arch
headers. Once we wrap asm/types.h, it will also replace the
glibc asm/types.h, not only the kernel one.

This results in build errors on some machines.

Drop this wrapper and do its work from linux/types.h wrapper,
also the glibc asm/types.h can already handle most of the type
definition it was doing (typedef __u64, __u32, etc...).

Todo: Check the others asm/*.h wrappers to prevent from other
conflicts.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      802da5f2
  3. 21 10月, 2009 1 次提交
    • S
      perf tools: Add 'make DEBUG=1' to remove the -O6 cflag · 60d526f7
      由 Steven Rostedt 提交于 
      When using gdb to debug perf, it is practically impossible to
use when perf is compiled with -O6. For developers, this patch
adds the DEBUG feature to the make command line so that a
developer can easily remove the optimization flag.

LKML-Reference: <1255590330.8392.446.camel@twins>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091020232033.984323261@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      60d526f7
  5. 20 10月, 2009 2 次提交
  7. 19 10月, 2009 2 次提交
  9. 12 10月, 2009 1 次提交
    • I
      perf tools: Fix the NO_64BIT build on pure 64-bit systems · 55621ccf
      由 Ingo Molnar 提交于 
      Randy Dunlap reported that 'make NO_64BIT=1' fails to build
a pure 32-b it binary on 64-bit/64-bit x86 systems.

The reason is that we dont pass in the -m32 and GCC defaults
to -m64.

So pass it in - and also extend the warning message about libelf
dependencies - glibc-dev[el] is needed as well beyond the libelf
library.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: Message-Id: <20091005131729.78444bfb.randy.dunlap@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      55621ccf
  11. 08 10月, 2009 1 次提交
    • F
      perf tools: Unify perf.data mapping and events handling · 016e92fb
      由 Frederic Weisbecker 提交于 
      This librarizes the perf.data file mapping and handling in various
perf tools, roughly reducing the amount of code and fixing the
places that mmap from beginning of the file whereas we want to mmap
from the beginning of the data, leading to page fault because the
mmap window is too small since the trace info are written in the
file too.

TODO:

 - convert perf timechart too
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091007104729.GD5043@nowhere>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      016e92fb
  13. 05 10月, 2009 1 次提交
    • A
      perf tools: Remove show_mask bitmask · ec218fc4
      由 Arnaldo Carvalho de Melo 提交于 
      As it was not being exposed via any command line and with --dsos/--comms
we can do this and even more, like asking for just kernel + some module:

[root@doppio linux-2.6-tip]# perf report --dsos \[kernel\],\[drm\]
--vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules | head -15
 # Samples: 619669
 #
 # Overhead          Command  Shared Object  Symbol
 # ........  ...............  .............  ......
 #
      7.12%          swapper  [kernel]       [k] read_hpet
      6.86%             init  [kernel]       [k] read_hpet
      6.22%             init  [kernel]       [k] mwait_idle_with_hints
      5.34%          swapper  [kernel]       [k] mwait_idle_with_hints
      3.01%          firefox  [kernel]       [.] vread_hpet
      2.14%             Xorg  [drm]          [k] drm_clflush_pages
      2.09%           pidgin  [kernel]       [.] vread_hpet
      1.58%     npviewer.bin  [kernel]       [.] vread_hpet
      1.37%          swapper  [kernel]       [k] hpet_next_event
      1.23%             Xorg  [kernel]       [k] read_hpet
[root@doppio linux-2.6-tip]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091003233048.GA30535@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ec218fc4
  15. 02 10月, 2009 1 次提交
    • A
      perf tools: Rewrite and improve support for kernel modules · 439d473b
      由 Arnaldo Carvalho de Melo 提交于 
      Representing modules as struct map entries, backed by a DSO, etc,
using /proc/modules to find where the module is loaded.

DSOs now can have a short and long name, so that in verbose mode we
can show exactly which .ko or vmlinux image was used.

As kernel modules now are a DSO separate from the kernel, we can
ask for just the hits for a particular set of kernel modules, just
like we can do with shared libraries:

[root@doppio linux-2.6-tip]# perf report -n --vmlinux
/home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15
    84.58%      13266             Xorg  [k] drm_clflush_pages
     4.02%        630             Xorg  [k] trace_kmalloc.clone.0
     3.95%        619             Xorg  [k] drm_ioctl
     2.07%        324             Xorg  [k] drm_addbufs
     1.68%        263             Xorg  [k] drm_gem_close_ioctl
     0.77%        120             Xorg  [k] drm_setmaster_ioctl
     0.70%        110             Xorg  [k] drm_lastclose
     0.68%        106             Xorg  [k] drm_open
     0.54%         85             Xorg  [k] drm_mm_search_free
[root@doppio linux-2.6-tip]#

Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko
would have the same effect. Allowing specifying just 'drm.ko' is left
for another patch.

Processing kallsyms so that per kernel module struct map are
instantiated was also left for another patch. That will allow
removing the module name from each of its symbols.

struct symbol was reduced by removing the ->module backpointer and
moving it (well now the map) to struct symbol_entry in perf top,
that is its only user right now.

The total linecount went down by ~500 lines.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      439d473b
  17. 01 10月, 2009 1 次提交
  19. 30 9月, 2009 2 次提交
    • A
      perf tools: Use rb_tree for maps · 1b46cddf
      由 Arnaldo Carvalho de Melo 提交于 
      Threads can have many and kernel modules will be represented as a
tree of maps as well.

Ah, and for a perf.data with 146607 samples:

Before:

[root@doppio ~]# perf stat -r 5 perf report > /dev/null

 Performance counter stats for 'perf report' (5 runs):

     699.823680  task-clock-msecs         #      0.991 CPUs    ( +-   0.454% )
             74  context-switches         #      0.000 M/sec   ( +-   1.709% )
              2  CPU-migrations           #      0.000 M/sec   ( +-  17.008% )
          23114  page-faults              #      0.033 M/sec   ( +-   0.000% )
     1381257019  cycles                   #   1973.721 M/sec   ( +-   0.290% )
     1456894438  instructions             #      1.055 IPC     ( +-   0.007% )
       18779818  cache-references         #     26.835 M/sec   ( +-   0.380% )
         641799  cache-misses             #      0.917 M/sec   ( +-   1.200% )

    0.705972729  seconds time elapsed   ( +-   0.501% )

[root@doppio ~]#

After

 Performance counter stats for 'perf report' (5 runs):

     691.261451  task-clock-msecs         #      0.993 CPUs    ( +-   0.307% )
             72  context-switches         #      0.000 M/sec   ( +-   0.829% )
              6  CPU-migrations           #      0.000 M/sec   ( +-  18.409% )
          23127  page-faults              #      0.033 M/sec   ( +-   0.000% )
     1366395876  cycles                   #   1976.670 M/sec   ( +-   0.153% )
     1443136016  instructions             #      1.056 IPC     ( +-   0.012% )
       17956402  cache-references         #     25.976 M/sec   ( +-   0.325% )
         661924  cache-misses             #      0.958 M/sec   ( +-   1.335% )

    0.696127275  seconds time elapsed   ( +-   0.377% )

I.e. we see some speedup too.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <20090928174846.GA3361@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1b46cddf
    • J
      perf tools: Put common histogram functions in their own file · 3d1d07ec
      由 John Kacur 提交于 
      Move histogram related functions into their own files (hist.c and
hist.h) and make use of them in builtin-annotate.c and
builtin-report.c.
Signed-off-by: NJohn Kacur <jkacur@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <alpine.LFD.2.00.0909281531180.8316@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3d1d07ec
  21. 25 9月, 2009 1 次提交
  23. 21 9月, 2009 1 次提交
    • I
      perf: Do the big rename: Performance Counters -> Performance Events · cdd6c482
      由 Ingo Molnar 提交于 
      Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )
Suggested-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      cdd6c482
  25. 19 9月, 2009 2 次提交
  27. 13 9月, 2009 1 次提交
    • I
      perf: Add 'perf sched' tool · 0a02ad93
      由 Ingo Molnar 提交于 
      This turn-key tool allows scheduler measurements to be
conducted and the results be displayed numerically.

First baby step towards that goal: clone the new command off of
perf trace.

Fix a few other details along the way:

 - add (minimal) perf trace documentation

 - reorder a few places

 - list perf trace in the mainporcelain list as well
   as it's a very useful utility.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0a02ad93
  29. 02 9月, 2009 1 次提交
    • I
      perf tools: Clean up warnings list in the Makefile · 61562445
      由 Ingo Molnar 提交于 
      Make it easier to turn warnings on/off by using a separate
line for each warning added.

Some of the warnings have too much of a nuisance factor and
we might want to turn them off in the future.

Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      61562445
  31. 17 8月, 2009 1 次提交
    • F
      perf tools: Add perf trace · 5f9c39dc
      由 Frederic Weisbecker 提交于 
      This adds perf trace into the set of perf tools.

It is written to fetch the tracepoint samples from perf events
and display them, according to the events information given by
the debugfs files through the util/trace* tools.

It is a rough first shot and doesn't yet handle the cpu,
timestamps fields and some other things.

Example:

 perf record -f -e workqueue:workqueue_execution:record -F 1 -a
 perf trace

       kblockd/0-236   [000]     0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0
     kondemand/0-360   [000]     0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0
     kondemand/0-360   [000]     0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0
     kondemand/1-361   [000]     0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0

Todo:

- A lot of things!
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5f9c39dc
  33. 16 8月, 2009 3 次提交
    • F
      perf tools: Substract -Wformat-nonliteral from Wformat=2 in extra flags · 0d31b82d
      由 Frederic Weisbecker 提交于 
      The soon coming perf trace needs to use printf with dynamically
built formats.

But we are using -Wformat=2 which is a shortcut for the
following set: -Wformat -Wformat-security -Wformat-y2k
-Wformat-nonliteral

-Wformat-nonliteral warns when it can't check formats because
they are not builtin constant strings, but we want to feature
dynamic formats. What we want instead is Wformat=2 minus
-Wformat-nonliteral, which is what this patch does.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250437927-25490-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0d31b82d
    • I
      perf: Build with stack-protector and with -D_FORTIFY_SOURCE=2 · 35ba15b7
      由 Ingo Molnar 提交于 
      Up our defences a bit.
Suggested-by: NArjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      35ba15b7
    • I
      perf: Enable more compiler warnings · 83a0944f
      由 Ingo Molnar 提交于 
      Related to a shadowed variable bug fix Valdis Kletnieks noticed
that perf does not get built with -Wshadow, which could have
helped us avoid the bug.

So enable -Wshadow and also enable the following warnings on
perf builds, in addition to the already enabled -Wall -Wextra
-std=gnu99 warnings:

 -Wcast-align
 -Wformat=2
 -Wshadow
 -Winit-self
 -Wpacked
 -Wredundant-decls
 -Wstack-protector
 -Wstrict-aliasing=3
 -Wswitch-default
 -Wswitch-enum
 -Wno-system-headers
 -Wundef
 -Wvolatile-register-var
 -Wwrite-strings
 -Wbad-function-cast
 -Wmissing-declarations
 -Wmissing-prototypes
 -Wnested-externs
 -Wold-style-definition
 -Wstrict-prototypes
 -Wdeclaration-after-statement

And change/fix the perf code to build cleanly under GCC 4.3.2.

The list of warnings enablement is rather arbitrary: it's based
on my (quick) reading of the GCC manpages and trying them on
perf.

I categorized the warnings based on individually enabling them
and looking whether they trigger something in the perf build.
If i liked those warnings (i.e. if they trigger for something
that arguably could be improved) i enabled the warning.

If the warnings seemed to come from language laywers spamming
the build with tons of nuisance warnings i generally kept them
off. Most of the sign conversion related warnings were in
this category. (A second patch enabling some of the sign
warnings might be welcome - sign bugs can be nasty.)

I also kept warnings that seem to make sense from their manpage
description and which produced no actual warnings on our code
base. These warnings might still be turned off if they end up
being a nuisance.

I also left out a few warnings that are not supported in older
compilers.

[ Note that these changes might break the build on older
  compilers i did not test, or on non-x86 architectures that
  produce different warnings, so more testing would be welcome. ]

Reported-by: Valdis.Kletnieks@vt.edu
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      83a0944f
  35. 15 8月, 2009 1 次提交
  37. 12 8月, 2009 3 次提交
  39. 09 8月, 2009 2 次提交
    • B
      perf report: Fix and improve the displaying of per-thread event counters · 8d513270
      由 Brice Goglin 提交于 
      Improve and fix the handling of per-thread counter stats
recorded via perf record -s. Previously we only displayed
it in debug printouts (-D) and even that output was hard
to disambiguate.

I moved everything to utils/values.[ch] so that we may reuse
it in perf stat.

We get something like this now:

 #  PID   TID  cache-misses  cache-references
   4658  4659        495581           3238779
   4658  4662        498246           3236823
   4658  4663        499531           3243162

Then it'll be easy to add --pretty=raw to display a single line per thread/event.

By the way, -S was also used for --symbol... So I used -T/--thread here.

perf report: Add -T/--threads to display per-thread counter values

 We get something like this now:
 #  PID   TID  cache-misses  cache-references
   4658  4659        495581           3238779
   4658  4662        498246           3236823
   4658  4663        499531           3243162

Per-thread arrays of counter values are managed in utils/values.[ch]
Signed-off-by: NBrice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8d513270
    • M
      perf_counter tools: Fix libbfd detection for systems with libz dependency · 183f3b08
      由 Mike Galbraith 提交于 
      Due to a libz dependency in some distro's binutils package,
C++ demangle support isn't compiled in despite the necessary
libraries being available.

Fix this by adding a -lz link test to the dependency detection
rules.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1249733655.6929.5.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      183f3b08
  41. 07 8月, 2009 1 次提交
  43. 05 8月, 2009 1 次提交
    • P
      perf: Auto-detect libbfd · 2cdbc46d
      由 Peter Zijlstra 提交于 
      Since the C++ demangling isn't needed for everybody and
bfd/iberty aren't widely/easily available on all machines, make
it optional.

It also allows you to forcefully disable demangling by using
NO_DEMANGLE=1 and otherwise tries to detect libbfd/libiberty
combinations that result in a compiling demangler.
Reported-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
LKML-Reference: <20090801082048.GX12579@kernel.dk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2cdbc46d
  45. 01 8月, 2009 1 次提交
    • I
      perf_counter tools: Fix link errors with older toolchains · 2d1b6949
      由 Ingo Molnar 提交于 
      On older distros (F8 for example) the perf build could fail
with such missing symbols:

    LINK perf
/usr/lib/gcc/x86_64-redhat-linux/4.3.2/../../../../lib64/libbfd.a(bfd.o): In function `bfd_demangle':
(.text+0x2b3): undefined reference to `cplus_demangle'
/usr/lib/gcc/x86_64-redhat-linux/4.3.2/../../../../lib64/libbfd.a(bfd.o): In function `bfd_demangle':

Link in -liberty too.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2d1b6949
  47. 23 7月, 2009 1 次提交
    • A
      perf symbol: C++ demangling · 28ac909b
      由 Arnaldo Carvalho de Melo 提交于 
      [acme@doppio ~]$ perf report -s comm,dso,symbol -C firefox -d /usr/lib64/xulrunner-1.9.1/libxul.so | grep :: | head
     2.21%  [.] nsDeque::Push(void*)
     1.78%  [.] GraphWalker::DoWalk(nsDeque&)
     1.30%  [.] GCGraphBuilder::AddNode(void*, nsCycleCollectionParticipant*)
     1.27%  [.] XPCWrappedNative::CallMethod(XPCCallContext&, XPCWrappedNative::CallMode)
     1.18%  [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
     1.13%  [.] nsDeque::PopFront()
     1.11%  [.] nsGlobalWindow::RunTimeout(nsTimeout*)
     0.97%  [.] nsXPConnect::Traverse(void*, nsCycleCollectionTraversalCallback&)
     0.95%  [.] nsJSEventListener::cycleCollection::Traverse(void*, nsCycleCollectionTraversalCallback&)
     0.95%  [.] nsCOMPtr_base::~nsCOMPtr_base()
[acme@doppio ~]$

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Suggested-by: NClark Williams <williams@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090720171412.GB10410@ghostprotocols.net>
      28ac909b
  49. 02 7月, 2009 3 次提交
  51. 01 7月, 2009 3 次提交
  53. 26 6月, 2009 1 次提交
    • F
      perf_counter tools: Prepare a small callchain framework · 8cb76d99
      由 Frederic Weisbecker 提交于 
      We plan to display the callchains depending on some user-configurable
parameters.

To gather the callchains stats from the recorded stream in a fast way,
this patch introduces an ad hoc radix tree adapted for callchains and also
a rbtree to sort these callchains once we have gathered every events
from the stream.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8cb76d99