- 05 6月, 2014 1 次提交
-
-
由 Hugh Dickins 提交于
Trinity reports BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:47 in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27 __might_sleep < down_write < __put_anon_vma < page_get_anon_vma < migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages .. Right, since conversion to mutex then rwsem, we should not put_anon_vma() from inside an rcu_read_lock()ed section: fix the two places that did so. And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra. Fixes: 88c22088 ("mm: optimize page_lock_anon_vma() fast-path") Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 5月, 2014 5 次提交
-
-
由 Naoya Horiguchi 提交于
When a memory error happens on an in-use page or (free and in-use) hugepage, the victim page is isolated with its refcount set to one. When you try to unpoison it later, unpoison_memory() calls put_page() for it twice in order to bring the page back to free page pool (buddy or free hugepage list). However, if another memory error occurs on the page which we are unpoisoning, memory_failure() returns without releasing the refcount which was incremented in the same call at first, which results in memory leak and unconsistent num_poisoned_pages statistics. This patch fixes it. Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> [2.6.32+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Commit 284f39af ("mm: memcg: push !mm handling out to page cache charge function") explicitly checks for page cache charges without any mm context (from kernel thread context[1]). This seemed to be the only possible case where memory could be charged without mm context so commit 03583f1a ("memcg: remove unnecessary !mm check from try_get_mem_cgroup_from_mm()") removed the mm check from get_mem_cgroup_from_mm(). This however caused another NULL ptr dereference during early boot when loopback kernel thread splices to tmpfs as reported by Stephan Kulow: BUG: unable to handle kernel NULL pointer dereference at 0000000000000360 IP: get_mem_cgroup_from_mm.isra.42+0x2b/0x60 Oops: 0000 [#1] SMP Modules linked in: btrfs dm_multipath dm_mod scsi_dh multipath raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod parport_pc parport nls_utf8 isofs usb_storage iscsi_ibft iscsi_boot_sysfs arc4 ecb fan thermal nfs lockd fscache nls_iso8859_1 nls_cp437 sg st hid_generic usbhid af_packet sunrpc sr_mod cdrom ata_generic uhci_hcd virtio_net virtio_blk ehci_hcd usbcore ata_piix floppy processor button usb_common virtio_pci virtio_ring virtio edd squashfs loop ppa] CPU: 0 PID: 97 Comm: loop1 Not tainted 3.15.0-rc5-5-default #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: __mem_cgroup_try_charge_swapin+0x40/0xe0 mem_cgroup_charge_file+0x8b/0xd0 shmem_getpage_gfp+0x66b/0x7b0 shmem_file_splice_read+0x18f/0x430 splice_direct_to_actor+0xa2/0x1c0 do_lo_receive+0x5a/0x60 [loop] loop_thread+0x298/0x720 [loop] kthread+0xc6/0xe0 ret_from_fork+0x7c/0xb0 Also Branimir Maksimovic reported the following oops which is tiggered for the swapcache charge path from the accounting code for kernel threads: CPU: 1 PID: 160 Comm: kworker/u8:5 Tainted: P OE 3.15.0-rc5-core2-custom #159 Hardware name: System manufacturer System Product Name/MAXIMUSV GENE, BIOS 1903 08/19/2013 task: ffff880404e349b0 ti: ffff88040486a000 task.ti: ffff88040486a000 RIP: get_mem_cgroup_from_mm.isra.42+0x2b/0x60 Call Trace: __mem_cgroup_try_charge_swapin+0x45/0xf0 mem_cgroup_charge_file+0x9c/0xe0 shmem_getpage_gfp+0x62c/0x770 shmem_write_begin+0x38/0x40 generic_perform_write+0xc5/0x1c0 __generic_file_aio_write+0x1d1/0x3f0 generic_file_aio_write+0x4f/0xc0 do_sync_write+0x5a/0x90 do_acct_process+0x4b1/0x550 acct_process+0x6d/0xa0 do_exit+0x827/0xa70 kthread+0xc3/0xf0 This patch fixes the issue by reintroducing mm check into get_mem_cgroup_from_mm. We could do the same trick in __mem_cgroup_try_charge_swapin as we do for the regular page cache path but it is not worth troubles. The check is not that expensive and it is better to have get_mem_cgroup_from_mm more robust. [1] - http://marc.info/?l=linux-mm&m=139463617808941&w=2 Fixes: 03583f1a ("memcg: remove unnecessary !mm check from try_get_mem_cgroup_from_mm()") Reported-and-tested-by: NStephan Kulow <coolo@suse.com> Reported-by: NBranimir Maksimovic <branimir.maksimovic@gmail.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
MADV_WILLNEED currently does not read swapped out shmem pages back in. Commit 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") made find_get_page() filter exceptional radix tree entries but failed to convert all find_get_page() callers that WANT exceptional entries over to find_get_entry(). One of them is shmem swap readahead in madvise, which now skips over any swap-out records. Convert it to find_get_entry(). Fixes: 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jens Axboe 提交于
In some testing I ran today (some fio jobs that spread over two nodes), we end up spending 40% of the time in filemap_check_errors(). That smells fishy. Looking further, this is basically what happens: blkdev_aio_read() generic_file_aio_read() filemap_write_and_wait_range() if (!mapping->nr_pages) filemap_check_errors() and filemap_check_errors() always attempts two test_and_clear_bit() on the mapping flags, thus dirtying it for every single invocation. The patch below tests each of these bits before clearing them, avoiding this issue. In my test case (4-socket box), performance went from 1.7M IOPS to 4.0M IOPS. Signed-off-by: NJens Axboe <axboe@fb.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen Yucong 提交于
For handling a free hugepage in memory failure, the race will happen if another thread hwpoisoned this hugepage concurrently. So we need to check PageHWPoison instead of !PageHWPoison. If hwpoison_filter(p) returns true or a race happens, then we need to unlock_page(hpage). Signed-off-by: NChen Yucong <slaoub@gmail.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Cc: <stable@vger.kernel.org> [2.6.36+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 5月, 2014 3 次提交
-
-
由 Philipp Hachtmann 提交于
Add the physmem list to the memblock structure. This list only exists if HAVE_MEMBLOCK_PHYS_MAP is selected and contains the unmodified list of physically available memory. It differs from the memblock memory list as it always contains all memory ranges even if the memory has been restricted, e.g. by use of the mem= kernel parameter. Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Philipp Hachtmann 提交于
Refactor the memblock code and extend the memblock API to make it more flexible. With the extended API it is simple to define and work with additional memory lists. The static functions memblock_add_region and __memblock_remove are renamed to memblock_add_range and meblock_remove_range and added to the memblock API. The __next_free_mem_range and __next_free_mem_range_rev functions are replaced with calls to the more generic list walkers __next_mem_range and __next_mem_range_rev. To walk an arbitrary memory list two new macros for_each_mem_range and for_each_mem_range_rev are added. These new macros are used to define for_each_free_mem_range and for_each_free_mem_range_reverse. Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jens Axboe 提交于
Continue moving some of the block files that are scattered around. bounce.c contains only code for bouncing the contents of a bio. It's block proper code, not mm code. Suggested-by: NMing Lei <tom.leiming@gmail.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 15 5月, 2014 1 次提交
-
-
由 Helge Deller 提交于
This patch affects only architectures where the stack grows upwards (currently parisc and metag only). On those do not hardcode the maximum initial stack size to 1GB for 32-bit processes, but make it configurable via a config option. The main problem with the hardcoded stack size is, that we have two memory regions which grow upwards: stack and heap. To keep most of the memory available for heap in a flexmap memory layout, it makes no sense to hard allocate up to 1GB of the memory for stack which can't be used as heap then. This patch makes the stack size for 32-bit processes configurable and uses 80MB as default value which has been in use during the last few years on parisc and which hasn't showed any problems yet. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net>
-
- 11 5月, 2014 2 次提交
-
-
由 Kirill A. Shutemov 提交于
It's critical for split_huge_page() (and migration) to catch and freeze all PMDs on rmap walk. It gets tricky if there's concurrent fork() or mremap() since usually we copy/move page table entries on dup_mm() or move_page_tables() without rmap lock taken. To get it work we rely on rmap walk order to not miss any entry. We expect to see destination VMA after source one to work correctly. But after switching rmap implementation to interval tree it's not always possible to preserve expected walk order. It works fine for dup_mm() since new VMA has the same vma_start_pgoff() / vma_last_pgoff() and explicitly insert dst VMA after src one with vma_interval_tree_insert_after(). But on move_vma() destination VMA can be merged into adjacent one and as result shifted left in interval tree. Fortunately, we can detect the situation and prevent race with rmap walk by moving page table entries under rmap lock. See commit 38a76013. Problem is that we miss the lock when we move transhuge PMD. Most likely this bug caused the crash[1]. [1] http://thread.gmane.org/gmane.linux.kernel.mm/96473 Fixes: 108d6642 ("mm anon rmap: remove anon_vma_moveto_tail") Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: NMichel Lespinasse <walken@google.com> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Commit 8910ae89 ("kmemleak: change some global variables to int"), in addition to the atomic -> int conversion, moved the disabling of kmemleak_early_log to the beginning of the kmemleak_init() function, before the full kmemleak tracing is actually enabled. In this small window, kmem_cache_create() is called by kmemleak which triggers additional memory allocation that are not traced. This patch restores the original logic with kmemleak_early_log disabling when kmemleak is fully functional. Fixes: 8910ae89 (kmemleak: change some global variables to int) Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 5月, 2014 9 次提交
-
-
由 Rik van Riel 提交于
Changing PTEs and PMDs to pte_numa & pmd_numa is done with the mmap_sem held for reading, which means a pmd can be instantiated and turned into a numa one while __handle_mm_fault() is examining the value of old_pmd. If that happens, __handle_mm_fault() should just return and let the page fault retry, instead of throwing an oops. This is handled by the test for pmd_trans_huge(*pmd) below. Signed-off-by: NRik van Riel <riel@redhat.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: NSunil Pandey <sunil.k.pandey@intel.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: linux-mm@kvack.org Cc: lwoodman@redhat.com Cc: dave.hansen@intel.com Link: http://lkml.kernel.org/r/20140429153615.2d72098e@annuminas.surriel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Christoph Lameter 提交于
debugobjects warning during netfilter exit: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 4178 at lib/debugobjects.c:260 debug_print_object+0x8d/0xb0() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20 Modules linked in: CPU: 6 PID: 4178 Comm: kworker/u16:2 Tainted: G W 3.11.0-next-20130906-sasha #3984 Workqueue: netns cleanup_net Call Trace: dump_stack+0x52/0x87 warn_slowpath_common+0x8c/0xc0 warn_slowpath_fmt+0x46/0x50 debug_print_object+0x8d/0xb0 __debug_check_no_obj_freed+0xa5/0x220 debug_check_no_obj_freed+0x15/0x20 kmem_cache_free+0x197/0x340 kmem_cache_destroy+0x86/0xe0 nf_conntrack_cleanup_net_list+0x131/0x170 nf_conntrack_pernet_exit+0x5d/0x70 ops_exit_list+0x5e/0x70 cleanup_net+0xfb/0x1c0 process_one_work+0x338/0x550 worker_thread+0x215/0x350 kthread+0xe7/0xf0 ret_from_fork+0x7c/0xb0 Also during dcookie cleanup: WARNING: CPU: 12 PID: 9725 at lib/debugobjects.c:260 debug_print_object+0x8c/0xb0() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20 Modules linked in: CPU: 12 PID: 9725 Comm: trinity-c141 Not tainted 3.15.0-rc2-next-20140423-sasha-00018-gc4ff6c4 #408 Call Trace: dump_stack (lib/dump_stack.c:52) warn_slowpath_common (kernel/panic.c:430) warn_slowpath_fmt (kernel/panic.c:445) debug_print_object (lib/debugobjects.c:262) __debug_check_no_obj_freed (lib/debugobjects.c:697) debug_check_no_obj_freed (lib/debugobjects.c:726) kmem_cache_free (mm/slub.c:2689 mm/slub.c:2717) kmem_cache_destroy (mm/slab_common.c:363) dcookie_unregister (fs/dcookies.c:302 fs/dcookies.c:343) event_buffer_release (arch/x86/oprofile/../../../drivers/oprofile/event_buffer.c:153) __fput (fs/file_table.c:217) ____fput (fs/file_table.c:253) task_work_run (kernel/task_work.c:125 (discriminator 1)) do_notify_resume (include/linux/tracehook.h:196 arch/x86/kernel/signal.c:751) int_signal (arch/x86/kernel/entry_64.S:807) Sysfs has a release mechanism. Use that to release the kmem_cache structure if CONFIG_SYSFS is enabled. Only slub is changed - slab currently only supports /proc/slabinfo and not /sys/kernel/slab/*. We talked about adding that and someone was working on it. [akpm@linux-foundation.org: fix CONFIG_SYSFS=n build] [akpm@linux-foundation.org: fix CONFIG_SYSFS=n build even more] Signed-off-by: NChristoph Lameter <cl@linux.com> Reported-by: NSasha Levin <sasha.levin@oracle.com> Tested-by: NSasha Levin <sasha.levin@oracle.com> Acked-by: NGreg KH <greg@kroah.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
This reverts commit 0bf1457f ("mm: vmscan: do not swap anon pages just because free+file is low") because it introduced a regression in mostly-anonymous workloads, where reclaim would become ineffective and trap every allocating task in direct reclaim. The problem is that there is a runaway feedback loop in the scan balance between file and anon, where the balance tips heavily towards a tiny thrashing file LRU and anonymous pages are no longer being looked at. The commit in question removed the safe guard that would detect such situations and respond with forced anonymous reclaim. This commit was part of a series to fix premature swapping in loads with relatively little cache, and while it made a small difference, the cure is obviously worse than the disease. Revert it. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NRafael Aquini <aquini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [3.12+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Dave Jones reports the following crash when find_get_pages_tag() runs into an exceptional entry: kernel BUG at mm/filemap.c:1347! RIP: find_get_pages_tag+0x1cb/0x220 Call Trace: find_get_pages_tag+0x36/0x220 pagevec_lookup_tag+0x21/0x30 filemap_fdatawait_range+0xbe/0x1e0 filemap_fdatawait+0x27/0x30 sync_inodes_sb+0x204/0x2a0 sync_inodes_one_sb+0x19/0x20 iterate_supers+0xb2/0x110 sys_sync+0x44/0xb0 ia32_do_call+0x13/0x13 1343 /* 1344 * This function is never used on a shmem/tmpfs 1345 * mapping, so a swap entry won't be found here. 1346 */ 1347 BUG(); After commit 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") this comment and BUG() are out of date because exceptional entries can now appear in all mappings - as shadows of recently evicted pages. However, as Hugh Dickins notes, "it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably any other PAGECACHE_TAG_*) to appear on an exceptional entry. I expect it comes down to an occasional race in RCU lookup of the radix_tree: lacking absolute synchronization, we might sometimes catch an exceptional entry, with the tag which really belongs with the unexceptional entry which was there an instant before." And indeed, not only is the tree walk lockless, the tags are also read in chunks, one radix tree node at a time. There is plenty of time for page reclaim to swoop in and replace a page that was already looked up as tagged with a shadow entry. Remove the BUG() and update the comment. While reviewing all other lookup sites for whether they properly deal with shadow entries of evicted pages, update all the comments and fix memcg file charge moving to not miss shmem/tmpfs swapcache pages. Fixes: 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NDave Jones <davej@redhat.com> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
The compaction freepage scanner implementation in isolate_freepages() starts by taking the current cc->free_pfn value as the first pfn. In a for loop, it scans from this first pfn to the end of the pageblock, and then subtracts pageblock_nr_pages from the first pfn to obtain the first pfn for the next for loop iteration. This means that when cc->free_pfn starts at offset X rather than being aligned on pageblock boundary, the scanner will start at offset X in all scanned pageblock, ignoring potentially many free pages. Currently this can happen when a) zone's end pfn is not pageblock aligned, or b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE enabled and a hole spanning the beginning of a pageblock This patch fixes the problem by aligning the initial pfn in isolate_freepages() to pageblock boundary. This also permits replacing the end-of-pageblock alignment within the for loop with a simple pageblock_nr_pages increment. Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Reported-by: NHeesub Shin <heesub.shin@samsung.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rik van Riel 提交于
It is possible for "limit - setpoint + 1" to equal zero, after getting truncated to a 32 bit variable, and resulting in a divide by zero error. Using the fully 64 bit divide functions avoids this problem. It also will cause pos_ratio_polynom() to return the correct value when (setpoint - limit) exceeds 2^32. Also uninline pos_ratio_polynom, at Andrew's request. Signed-off-by: NRik van Riel <riel@redhat.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nishanth Aravamudan 提交于
Currently, I am seeing the following when I `mount -t hugetlbfs /none /dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's related to the fact that hugetlbfs is properly not correctly setting itself up in this state?: Unable to handle kernel paging request for data at address 0x00000031 Faulting instruction address: 0xc000000000245710 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries .... In KVM guests on Power, in a guest not backed by hugepages, we see the following: AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 64 kB HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages are not supported at boot-time, but this is only checked in hugetlb_init(). Extract the check to a helper function, and use it in a few relevant places. This does make hugetlbfs not supported (not registered at all) in this environment. I believe this is fine, as there are no valid hugepages and that won't change at runtime. [akpm@linux-foundation.org: use pr_info(), per Mel] [akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined] Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
After creating a cache for a memcg we should initialize its sysfs attrs with the values from its parent. That's what memcg_propagate_slab_attrs is for. Currently it's broken - we clearly muddled root-vs-memcg caches there. Let's fix it up. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
too many places open-code it Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 06 5月, 2014 2 次提交
-
-
由 David Miller 提交于
If freelist_idx_t is a byte, SLAB_OBJ_MAX_NUM should be 255 not 256, and likewise if freelist_idx_t is a short, then it should be 65535 not 65536. This was leading to all kinds of random crashes on sparc64 where PAGE_SIZE is 8192. One problem shown was that if spinlock debugging was enabled, we'd get deadlocks in copy_pte_range() or do_wp_page() with the same cpu already holding a lock it shouldn't hold, or the lock belonging to a completely unrelated process. Fixes: a41adfaa ("slab: introduce byte sized index for the freelist of a slab") Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Commit a41adfaa ("slab: introduce byte sized index for the freelist of a slab") changes the size of freelist index and also changes prototype of accessor function to freelist index. And there was a mistake. The mistake is that although it changes the size of freelist index correctly, it changes the size of the index of freelist index incorrectly. With patch, freelist index can be 1 byte or 2 bytes, that means that num of object on on a slab can be more than 255. So we need more than 1 byte for the index to find the index of free object on freelist. But, above patch makes this index type 1 byte, so slab which have more than 255 objects cannot work properly and in consequence of it, the system cannot boot. This issue was reported by Steven King on m68knommu which would use 2 bytes freelist index: https://lkml.org/lkml/2014/4/16/433 To fix is easy. To change the type of the index of freelist index on accessor functions is enough to fix this bug. Although 2 bytes is enough, I use 4 bytes since it have no bad effect and make things more easier. This fix was suggested and tested by Steven in his original report. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Reported-and-acked-by: NSteven King <sfking@fdwdc.com> Acked-by: NChristoph Lameter <cl@linux.com> Tested-by: NJames Hogan <james.hogan@imgtec.com> Tested-by: NDavid Miller <davem@davemloft.net> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 5月, 2014 1 次提交
-
-
由 Hiroshige Sato 提交于
Fix printk typo in dmapool.c Signed-off-by: NHiroshige Sato <sato.vintage@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 4月, 2014 1 次提交
-
-
由 Linus Torvalds 提交于
BUG_ON() is a big hammer, and should be used _only_ if there is some major corruption that you cannot possibly recover from, making it imperative that the current process (and possibly the whole machine) be terminated with extreme prejudice. The trivial sanity check in the vmacache code is *not* such a fatal error. Recovering from it is absolutely trivial, and using BUG_ON() just makes it harder to debug for no actual advantage. To make matters worse, the placement of the BUG_ON() (only if the range check matched) actually makes it harder to hit the sanity check to begin with, so _if_ there is a bug (and we just got a report from Srivatsa Bhat that this can indeed trigger), it is harder to debug not just because the machine is possibly dead, but because we don't have better coverage. BUG_ON() must *die*. Maybe we should add a checkpatch warning for it, because it is simply just about the worst thing you can ever do if you hit some "this cannot happen" situation. Reported-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 4月, 2014 1 次提交
-
-
由 Linus Torvalds 提交于
The mmu-gather operation 'tlb_flush_mmu()' has done two things: the actual tlb flush operation, and the batched freeing of the pages that the TLB entries pointed at. This splits the operation into separate phases, so that the forced batched flushing done by zap_pte_range() can now do the actual TLB flush while still holding the page table lock, but delay the batched freeing of all the pages to after the lock has been dropped. This in turn allows us to avoid a race condition between set_page_dirty() (as called by zap_pte_range() when it finds a dirty shared memory pte) and page_mkclean(): because we now flush all the dirty page data from the TLB's while holding the pte lock, page_mkclean() will be held up walking the (recently cleaned) page tables until after the TLB entries have been flushed from all CPU's. Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NDave Hansen <dave.hansen@intel.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 4月, 2014 1 次提交
-
-
由 Linus Torvalds 提交于
fixup_user_fault() is used by the futex code when the direct user access fails, and the futex code wants it to either map in the page in a usable form or return an error. It relied on handle_mm_fault() to map the page, and correctly checked the error return from that, but while that does map the page, it doesn't actually guarantee that the page will be mapped with sufficient permissions to be then accessed. So do the appropriate tests of the vma access rights by hand. [ Side note: arguably handle_mm_fault() could just do that itself, but we have traditionally done it in the caller, because some callers - notably get_user_pages() - have been able to access pages even when they are mapped with PROT_NONE. Maybe we should re-visit that design decision, but in the meantime this is the minimal patch. ] Found by Dave Jones running his trinity tool. Reported-by: NDave Jones <davej@redhat.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 4月, 2014 4 次提交
-
-
由 Kirill A. Shutemov 提交于
Sasha Levin has reported two THP BUGs[1][2]. I believe both of them have the same root cause. Let's look to them one by one. The first bug[1] is "kernel BUG at mm/huge_memory.c:1829!". It's BUG_ON(mapcount != page_mapcount(page)) in __split_huge_page(). From my testing I see that page_mapcount() is higher than mapcount here. I think it happens due to race between zap_huge_pmd() and page_check_address_pmd(). page_check_address_pmd() misses PMD which is under zap: CPU0 CPU1 zap_huge_pmd() pmdp_get_and_clear() __split_huge_page() anon_vma_interval_tree_foreach() __split_huge_page_splitting() page_check_address_pmd() mm_find_pmd() /* * We check if PMD present without taking ptl: no * serialization against zap_huge_pmd(). We miss this PMD, * it's not accounted to 'mapcount' in __split_huge_page(). */ pmd_present(pmd) == 0 BUG_ON(mapcount != page_mapcount(page)) // CRASH!!! page_remove_rmap(page) atomic_add_negative(-1, &page->_mapcount) The second bug[2] is "kernel BUG at mm/huge_memory.c:1371!". It's VM_BUG_ON_PAGE(!PageHead(page), page) in zap_huge_pmd(). This happens in similar way: CPU0 CPU1 zap_huge_pmd() pmdp_get_and_clear() page_remove_rmap(page) atomic_add_negative(-1, &page->_mapcount) __split_huge_page() anon_vma_interval_tree_foreach() __split_huge_page_splitting() page_check_address_pmd() mm_find_pmd() pmd_present(pmd) == 0 /* The same comment as above */ /* * No crash this time since we already decremented page->_mapcount in * zap_huge_pmd(). */ BUG_ON(mapcount != page_mapcount(page)) /* * We split the compound page here into small pages without * serialization against zap_huge_pmd() */ __split_huge_page_refcount() VM_BUG_ON_PAGE(!PageHead(page), page); // CRASH!!! So my understanding the problem is pmd_present() check in mm_find_pmd() without taking page table lock. The bug was introduced by me commit with commit 117b0791. Sorry for that. :( Let's open code mm_find_pmd() in page_check_address_pmd() and do the check under page table lock. Note that __page_check_address() does the same for PTE entires if sync != 0. I've stress tested split and zap code paths for 36+ hours by now and don't see crashes with the patch applied. Before it took <20 min to trigger the first bug and few hours for second one (if we ignore first). [1] https://lkml.kernel.org/g/<53440991.9090001@oracle.com> [2] https://lkml.kernel.org/g/<5310C56C.60709@oracle.com> Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: NSasha Levin <sasha.levin@oracle.com> Tested-by: NSasha Levin <sasha.levin@oracle.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Dave Jones <davej@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning in mm/filemap.c: Warning(mm/filemap.c:2600): Excess function parameter 'ppos' description in '__generic_file_aio_write' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mizuma, Masayoshi 提交于
soft lockup in freeing gigantic hugepage fixed in commit 55f67141 "mm: hugetlb: fix softlockup when a large number of hugepages are freed." can happen in return_unused_surplus_pages(), so let's fix it. Signed-off-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Seems to be called with preemption enabled. Therefore it must use mod_zone_page_state instead. Signed-off-by: NChristoph Lameter <cl@linux.com> Reported-by: NGrygorii Strashko <grygorii.strashko@ti.com> Tested-by: NGrygorii Strashko <grygorii.strashko@ti.com> Cc: Tejun Heo <tj@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 4月, 2014 2 次提交
-
-
由 Peter Zijlstra 提交于
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dongsheng Yang 提交于
Replace various -20/+19 hardcoded nice values with MIN_NICE/MAX_NICE. Signed-off-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/ff13819fd09b7a5dba5ab5ae797f2e7019bdfa17.1394532288.git.yangds.fnst@cn.fujitsu.com Cc: devel@driverdev.osuosl.org Cc: devicetree@vger.kernel.org Cc: fcoe-devel@open-fcoe.org Cc: linux390@de.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: nbd-general@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: openipmi-developer@lists.sourceforge.net Cc: qla2xxx-upstream@qlogic.com Cc: linux-arch@vger.kernel.org [ Consolidated the patches, twiddled the changelog. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 15 4月, 2014 1 次提交
-
-
由 Jianyu Zhan 提交于
pcpu_chunk_struct_size = sizeof(struct pcpu_chunk) + BITS_TO_LONGS(pcpu_unit_pages) * sizeof(unsigned long) It hardly could be ever bigger than PAGE_SIZE even for large-scale machine, but for consistency with its couterpart pcpu_mem_zalloc(), use pcpu_mem_free() instead. Commit b4916cb1 ("percpu: make pcpu_free_chunk() use pcpu_mem_free() instead of kfree()") addressed this problem, but missed this one. tj: commit message updated Signed-off-by: NJianyu Zhan <nasa4836@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org> Fixes: 099a19d9 ("percpu: allow limited allocation before slab is online) Cc: stable@vger.kernel.org
-
- 14 4月, 2014 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Some versions of gcc even warn about it: mm/shmem.c: In function ‘shmem_file_aio_read’: mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function If the loop is aborted during the first iteration by one of the two first break statements, error will be uninitialized. Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill loop over iovec in generic_file_aio_read()"). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 4月, 2014 1 次提交
-
-
由 Al Viro 提交于
that commit has fixed only the parts of that mess in fs/splice.c itself; there had been more in several other ->splice_read() instances... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 4月, 2014 1 次提交
-
-
由 Dave Hansen 提交于
'struct page' has two list_head fields: 'lru' and 'list'. Conveniently, they are unioned together. This means that code can use them interchangably, which gets horribly confusing like with this nugget from slab.c: > list_del(&page->lru); > if (page->active == cachep->num) > list_add(&page->list, &n->slabs_full); This patch makes the slab and slub code use page->lru universally instead of mixing ->list and ->lru. So, the new rule is: page->lru is what the you use if you want to keep your page on a list. Don't like the fact that it's not called ->list? Too bad. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NChristoph Lameter <cl@linux.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPekka Enberg <penberg@kernel.org>
-
- 09 4月, 2014 1 次提交
-
-
由 Johannes Weiner 提交于
Page reclaim force-scans / swaps anonymous pages when file cache drops below the high watermark of a zone in order to prevent what little cache remains from thrashing. However, on bigger machines the high watermark value can be quite large and when the workload is dominated by a static anonymous/shmem set, the file set might just be a small window of used-once cache. In such situations, the VM starts swapping heavily when instead it should be recycling the no longer used cache. This is a longer-standing problem, but it's more likely to trigger after commit 81c0a2bb ("mm: page_alloc: fair zone allocator policy") because file pages can no longer accumulate in a single zone and are dispersed into smaller fractions among the available zones. To resolve this, do not force scan anon when file pages are low but instead rely on the scan/rotation ratios to make the right prediction. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NRafael Aquini <aquini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: <stable@kernel.org> [3.12+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 4月, 2014 2 次提交
-
-
由 Mark Salter 提交于
This patch creates a generic implementation of early_ioremap() support based on the existing x86 implementation. early_ioremp() is useful for early boot code which needs to temporarily map I/O or memory regions before normal mapping functions such as ioremap() are available. Some architectures have optional MMU. In the no-MMU case, the remap functions simply return the passed in physical address and the unmap functions do nothing. Signed-off-by: NMark Salter <msalter@redhat.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Statistics are not critical to the operation of the allocation but should also not cause too much overhead. When __this_cpu_inc is altered to check if preemption is disabled this triggers. Use raw_cpu_inc to avoid the checks. Using this_cpu_ops may cause interrupt disable/enable sequences on various arches which may significantly impact allocator performance. [akpm@linux-foundation.org: add comment] Signed-off-by: NChristoph Lameter <cl@linux.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-