Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the limit of 256 interrupt vectors by changing the value stored in
orig_{e,r}ax to be the complemented interrupt vector.  The orig_{e,r}ax
needs to be < 0 to allow the signal code to distinguish between return from
interrupt and return from syscall.  With this change applied, NR_IRQS can
be > 256.

Xen extends the IRQ numbering space to include room for dynamically
allocated virtual interrupts (in the range 256-511), which requires a more
permissive interface to do_IRQ.
Signed-off-by: NIan Pratt <ian.pratt@xensource.com>
Signed-off-by: NChristian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch fixes two issues:

1.  cpu_init is called with interrupt disabled.  Allocating gdt table
   there isn't good at runtime.

2. gdt table page cause memory leak in CPU hotplug case.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update SELinux to cause the keycreate process attribute held in
/proc/self/attr/keycreate to be inherited across a fork and reset upon
execve.  This is consistent with the handling of the other process
attributes provided by SELinux and also makes it simpler to adapt logon
programs to properly handle the keycreate attribute.
Signed-off-by: NMichael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With Goto-san's patch, we can add new pgdat/node at runtime.  I'm now
considering node-hot-add with cpu + memory on ACPI.

I found acpi container, which describes node, could evaluate cpu before
memory. This means cpu-hot-add occurs before memory hot add.

In most part, cpu-hot-add doesn't depend on node hot add.  But register_cpu(),
which creates symbolic link from node to cpu, requires that node should be
onlined before register_cpu().  When a node is onlined, its pgdat should be
there.

This patch-set holds off creating symbolic link from node to cpu
until node is onlined.

This removes node arguments from register_cpu().

Now, register_cpu() requires 'struct node' as its argument.  But the array of
struct node is now unified in driver/base/node.c now (By Goto's node hotplug
patch).  We can get struct node in generic way.  So, this argument is not
necessary now.

This patch also guarantees add cpu under node only when node is onlined.  It
is necessary for node-hot-add vs.  cpu-hot-add patch following this.

Moreover, register_cpu calculates cpu->node_id by cpu_to_node() without regard
to its 'struct node *root' argument.  This patch removes it.

Also modify callers of register_cpu()/unregister_cpu, whose args are changed
by register-cpu-remove-node-struct patch.

[Brice.Goglin@ens-lyon.org: fix it]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a patch to allocate pgdat and per node data area for ia64.  The size
for them can be calculated by compute_pernodesize().
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is to refresh node_data[] array for ia64.  As I mentioned previous
patches, ia64 has copies of information of pgdat address array on each node as
per node data.

At v2 of node_add, this function used stop_machine_run() to update them.  (I
wished that they were copied safety as much as possible.) But, in this patch,
this arrays are just copied simply, and set node_online_map bit after
completion of pgdat initialization.

So, kernel must touch NODE_DATA() macro after checking node_online_map().
(Current code has already done it.) This is more simple way for just
hot-add.....

Note : It will be problem when hot-remove will occur,
       because, even if online_map bit is set, kernel may
       touch NODE_DATA() due to race condition. :-(
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] pgdat allocation and update for ia64 of memory hotplug: hold pgdat address at system running

This is a preparatory patch to make common code for updating of NODE_DATA() of
ia64 between boottime and hotplug.

Current code remembers pgdat address in mem_data which is used at just boot
time.  But its information can be used at hotplug time by moving to global
value.  The next patch uses this array.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When new node becomes enable by hot-add, new sysfs file must be created for
new node.  So, if new node is enabled by add_memory(), register_one_node() is
called to create it.  In addition, I386's arch_register_node() and a part of
register_nodes() of powerpc are consolidated to register_one_node() as a
generic_code().

This is tested by Tiger4(IPF) with node hot-plug emulation.
Signed-off-by: NKeiichiro Tokunaga <tokuanga.keiich@jp.fujitsu.com>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix "undefined reference to `arch_add_memory'" on sparc64 allmodconfig.

sparc64 doesn't support memory hotplug.  But we want it to support
sparsemem.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows hot-add memory which is not aligned to section.

Now, hot-added memory has to be aligned to section size.  Considering big
section sized archs, this is not useful.

When hot-added memory is registerd as iomem resoruce by iomem resource
patch, we can make use of that information to detect valid memory range.

Note: With this, not-aligned memory can be registerd. To allow hot-add
      memory with holes, we have to do more work around add_memory().
      (It doesn't allows add memory to already existing mem section.)
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Register hot-added memory to iomem_resource.  With this, /proc/iomem can
show hot-added memory.

Note: kdump uses /proc/iomem to catch memory range when it is installed.
      So, kdump should be re-installed after /proc/iomem change.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add node-hot-add support to add_memory().

node hotadd uses this sequence.
1. allocate pgdat.
2. refresh NODE_DATA()
3. call free_area_init_node() to initialize
4. create sysfs entry
5. add memory (old add_memory())
6. set node online
7. run kswapd for new node.
(8). update zonelist after pages are onlined. (This is already merged in -mm
   due to update phase is difference.)

Note:
  To make common function as much as possible,
  there is 2 changes from v2.
    - The old add_memory(), which is defiend by each archs,
      is renamed to arch_add_memory(). New add_memory becomes
      caller of arch dependent function as a common code.

    - This patch changes add_memory()'s interface
        From: add_memory(start, end)
        TO  : add_memory(nid, start, end).
      It was cause of similar code that finding node id from
      physical address is inside of old add_memory() on each arch.

      In addition, acpi memory hotplug driver can find node id easier.
      In v2, it must walk DSDT'S _CRS by matching physical address to
      get the handle of its memory device, then get _PXM and node id.
      Because input is just physical address.
      However, in v3, the acpi driver can use handle to get _PXM and node id
      for the new memory device. It can pass just node id to add_memory().

Fix interface of arch_add_memory() is in next patche.
Signed-off-by: NYasunori Goto     <y-goto@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When node is hot-added, kswapd for the node should start.  This export kswapd
start function as kswapd_run() to use at add_memory().

[akpm@osdl.org: daemonize() isn't needed when using the kthread API]
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Refresh NODE_DATA() for generic archs.  In this case, NODE_DATA(nid) ==
node_data[nid].  node_data[] is array of address of pgdat.  So, refresh is
quite simple.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For node hotplug, basically we have to allocate new pgdat.  But, there are
several types of implementations of pgdat.

1. Allocate only pgdat.
   This style allocate only pgdat area.
   And its address is recorded in node_data[].
   It is most popular style.

2. Static array of pgdat
   In this case, all of pgdats are static array.
   Some archs use this style.

3. Allocate not only pgdat, but also per node data.
   To increase performance, each node has copy of some data as
   a per node data. So, this area must be allocated too.

   Ia64 is this style. Ia64 has the copies of node_data[] array
   on each per node data to increase performance.

In this series of patches, treat (1) as generic arch.

generic archs can use generic function. (2) and (3) should have
its own if necessary.

This patch defines pgdat allocator.
Updating NODE_DATA() macro function is in other patch.
Signed-off-by: NYasonori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is to find node id from acpi's handle of memory_device in DSDT.  _PXM for
the new node can be found by acpi_get_pxm() by using new memory's handle.  So,
node id can be found by pxm_to_nid_map[].

  This patch becomes simpler than v2 of node hot-add patch.
  Because old add_memory() function doesn't have node id parameter.
  So, kernel must find its handle by physical address via DSDT again.
  But, v3 just give node id to add_memory() now.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] Catch notification of memory add event of ACPI via container driver. (avoid redundant call add_memory)

When acpi_memory_device_init() is called at boottime to register struct
memory acpi_memory_device, acpi_bus_add() are called via
acpi_driver_attach().

But it also calls ops->start() function.  It is called even if the memory
blocks are initialized at early boottime.  In this case add_memory() return
-EEXIST, and the memory blocks becomes INVALID state even if it is normal.

This is patch to avoid calling add_memory() for already available memory.

[akpm@osdl.org: coding cleanups]
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] Catch notification of memory add event of ACPI via container driver. (register start func for memory device)

This is a patch to call add_memroy() when notify reaches for new node's add
event.

When new node is added, notify of ACPI reaches container device which means
the node.

Container device driver calls acpi_bus_scan() to find and add belonging
devices (which means cpu, memory and so on).  Its function calls add and
start function of belonging devices's driver.

Howevever, current memory hotplug driver just register add function to
create sysfs file for its memory.  But, acpi_memory_enable_device() is not
called because it is considered just the case that notify reaches memory
device directly.  So, if notify reaches container device nothing can call
add_memory().

This is a patch to create start function which calls add_memory().
add_memory() can be called by this when notify reaches container device.

[akpm@osdl.org: coding cleanups]
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current acpi memory hotplug just looks into the first entry of resources in
_CRS.  But, _CRS can contain plural resources.  So, if _CRS contains plural
resoureces, acpi memory hot add cannot add all memory.

With this patch, acpi memory hotplug can deal with Memory Device, whose
_CRS contains plural resources.

Tested on ia64 memory hotplug test envrionment (not emulation, uses alpha
version firmware which supports dynamic reconfiguration of NUMA.)

Note: Microsoft's Windows Server 2003 requires big (>4G)resoureces to be
      divided into small (<4G) resources. looks crazy, but not invalid.
      (See http://www.microsoft.com/whdc/system/pnppwr/hotadd/hotaddmem.mspx)
      For this reason, a firmware vendor who supports Windows writes plural
      resources in a _CRS even if they are contiguous.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_PM_TRACES scrogs your RTC.  Mark it as experimental, and defaulting to
`off'.

Also beef up the help message a bit.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix function definitions to be ANSI-compliant:
lib/zlib_inflate/inffast.c:68:1: warning: non-ANSI definition of function 'inflate_fast'
lib/zlib_inflate/inftrees.c:33:1: warning: non-ANSI definition of function 'zlib_inflate_table'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kernel/acct.c:579:19: warning: non-ANSI function declaration of function 'acct_process'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Builds on ARM report link problems with common configurations like
statically linked NFS (for nfsroot).  The symptom is that __init
section code references __exit section code; that won't work since
the exit sections are discarded (since they can never be called).

The best fix for these particular cases would be an "__init_or_exit"
section annotation.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It should be done before calling class_device_unregister() because
it will destroy the device and free memory if there are no other
references to the device.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commit e5c44fd8.

Thanks to Daniel Ritz and Michal Piotrowski for noticing the problem.

Daniel says:

  "[The] reason is a recent change that made modules always shows as
   module.mod.  it breaks modprobe and probably many scripts..besides
   lsmod looking horrible

   stuff like this in modprobe.conf:
        install pcmcia_core /sbin/modprobe --ignore-install pcmcia_core; /sbin/modprobe pcmcia
   makes modprobe fork/exec endlessly calling itself...until oom
   interrupts it"
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits)
  [PATCH] fs/ocfs2/dlm/: cleanups
  ocfs2: fix compiler warnings in dlm_convert_lock_handler()
  ocfs2: dlm_print_one_mle() needs to be defined
  ocfs2: remove whitespace in dlmunlock.c
  ocfs2: move dlm work to a private work queue
  ocfs2: fix incorrect error returns
  ocfs2: tune down some noisy messages during dlm recovery
  ocfs2: display message before waiting for recovery to complete
  ocfs2: mlog in dlm_convert_lock_handler() should be ML_ERROR
  ocfs2: retry operations when a lock is marked in recovery
  ocfs2: use cond_resched() in dlm_thread()
  ocfs2: use GFP_NOFS in some dlm operations
  ocfs2: wait for recovery when starting lock mastery
  ocfs2: continue recovery when a dead node is encountered
  ocfs2: remove unneccesary spin_unlock() in dlm_remaster_locks()
  ocfs2: dlm_remaster_locks() should never exit without completing
  ocfs2: special case recovery lock in dlmlock_remote()
  ocfs2: pending mastery asserts and migrations should block each other
  ocfs2: temporarily disable automatic lock migration
  ocfs2: do not unconditionally purge the lockres in dlmlock_remote()
  ...

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3657/1: S3C24XX: Documentation update of Overview.txt
  [ARM] Update mach-types
  [ARM] 3656/1: S3C2412: Add S3C2412 and S3C2413 documenation
  [ARM] 3654/1: add ajeco 1arm sbc support
  [ARM] fix drivers/mfd/ucb1x00-core.c IRQ probing bug
  [ARM] 3651/1: S3C24XX: Make arch list more detailed
  [ARM] 3650/1: S3C2412: Update s3c2410_defconfig
  [ARM] 3649/1: S3C24XX: Fix capitalisation of CPU on SMDK2440
  [ARM] 3612/1: make pci bus optional for ixp4xx platform
  [ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQ
  [ARM] Remove save_lr/restore_pc macros
  [ARM] Remove partial non-v6 binutils compatibility
  [ARM] Remove LOADREGS macro
  [ARM] Remove RETINSTR macro

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] 8250_pnp: add support for other Wacom tablets

Patch from Ben Dooks

Update the list of supported devices, and remove the
changelog. Add SMDK2413 information.--
Signed-off-by: NBen Dooks &lt;ben-linux@fluff.org&gt;Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Usual mach-types update.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch #if 0's the no longer used dlm_dump_lock_resources().

Since this makes dlmdebug.h empty, this patch also removes this header.

Additionally, the needlessly global dlm_is_node_recovered() is made
static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

We need to cast to unsigned long long.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Fixes compile breakage.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The work that is done can block for long periods of time and so is not
appropriate for keventd.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Use DLM_REJECTED instead of DLM_RECOVERING.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>