mpparse is the only user of mp_ioapic_routing.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use find_e820_area to find addess for new RAMDISK, instead of using ram blindly

also print out low ram and bootmap info
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

move early_res related from e820_64.c to e820.c
make edba detection to be done in head32.c
remove smp_alloc_memory, because we have fixed trampoline address now.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>

 arch/x86/kernel/e820.c              |  214 ++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/e820_64.c           |  196 --------------------------------
 arch/x86/kernel/head32.c            |   76 ++++++++++++
 arch/x86/kernel/setup_32.c          |  109 +++---------------
 arch/x86/kernel/smpboot.c           |   17 --
 arch/x86/kernel/trampoline.c        |    2
 arch/x86/mach-voyager/voyager_smp.c |    9 -
 include/asm-x86/e820.h              |    6 +
 include/asm-x86/e820_64.h           |    9 -
 include/asm-x86/smp.h               |    1
 arch/x86/kernel/e820.c              |  214 ++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/e820_64.c           |  196 --------------------------------
 arch/x86/kernel/head32.c            |   76 ++++++++++++
 arch/x86/kernel/setup_32.c          |  109 +++---------------
 arch/x86/kernel/smpboot.c           |   17 --
 arch/x86/kernel/trampoline.c        |    2
 arch/x86/mach-voyager/voyager_smp.c |    9 -
 include/asm-x86/e820.h              |    6 +
 include/asm-x86/e820_64.h           |    9 -
 include/asm-x86/smp.h               |    1
 arch/x86/kernel/e820.c              |  214 ++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/e820_64.c           |  196 --------------------------------
 arch/x86/kernel/head32.c            |   76 ++++++++++++
 arch/x86/kernel/setup_32.c          |  109 +++---------------
 arch/x86/kernel/smpboot.c           |   17 --
 arch/x86/kernel/trampoline.c        |    2
 arch/x86/mach-voyager/voyager_smp.c |    9 -
 include/asm-x86/e820.h              |    6 +
 include/asm-x86/e820_64.h           |    9 -
 include/asm-x86/smp.h               |    1
 10 files changed, 320 insertions(+), 319 deletions(-)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add to the kernels boot memory map 'memmap' entries found in
the EFI memory descriptors passed in from the BIOS.

On EFI systems, up to E820MAX == 128 memory map entries can
be passed via the legacy E820 interface (limited by the size
of the 'zeropage').  These entries can be duplicated in the
EFI descriptors also passed from the BIOS, and possibly more
entries passed by the EFI interface, which does not have the
E820MAX limit on number of memory map entries.

This code doesn't worry about the likely duplicate, overlapping
or (unlikely) conflicting entries between the EFI map and the
E820 map.  It just dumps all the EFI entries into the memmap[]
array (which already has the E820 entries) and lets the existing
routine sanitize_e820_map() sort the mess out.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Elaborate on the comment for sanitize_e820_map(), epxlaining more what
it does, what it inputs, and what it returns.  Rearrange the placement of
this comment to fit kernel conventions, before the routine's code rather
than buried inside it.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The map size counter passed into, and back out of, sanitize_e820_map(),
was an eight bit type (char or u8), as derived from its origins in
legacy BIOS E820 structures.  This patch changes that type to an 'int',
to allow this sanitize routine to also be used on larger maps (larger
than the 256 count that fits in a char).  The legacy BIOS E820 interface
of course does not change; that remains at 8 bits for this count, holding
up to E820MAX == 128 entries.  But the kernel internals can handle more
when those additional memory map entries are passed from the BIOS via
EFI interfaces.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Extend internal boot time memory tables to allow for up to
three entries per node, which may be larger than the 128 E820MAX
entries handled by the legacy BIOS E820 interface.  The EFI
interface, if present, is capable of passing memory map
entries for these larger node counts.

This patch requires an earlier patch that rewrote code depending
on these array sizes from using E820MAX explicitly to size loops,
to instead using ARRAY_SIZE() of the applicable array.

Another patch following this one will provide the code to pick
up additional memory entries passed via the EFI interface from
the BIOS and insert them in the following, now enlarged, arrays.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch is motivated by a subsequent patch which will allow for more
memory map entries on EFI supported systems than can be passed via the x86
legacy BIOS E820 interface.  The legacy interface is limited to E820MAX ==
128 memory entries, and that "E820MAX" manifest constant was used as the
size for several arrays and loops over those arrays.

The primary change in this patch is to change code loop sizes over those
arrays from using the constant E820MAX, to using the ARRAY_SIZE() macro
evaluated for the array being looped.  That way, a subsequent patch can
change the size of some of these arrays, without breaking this code.

This patch also adds a parameter to the sanitize_e820_map() routine,
which had an implicit size for the array passed it of E820MAX entries.
This new parameter explicitly passes the size of said array.  Once again,
this will allow a subsequent patch to change that array size for some
calls to sanitize_e820_map() without breaking the code.

As part of enhancing the sanitize_e820_map() interface this way, I further
combined the unnecessarily distinct x86_32 and x86_64 declarations for
this routine into a single, commonly used, declaration.

This patch in itself should make no difference to the resulting kernel
binary.

[ mingo@elte.hu: merged to -tip ]
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Standardize a few pointer declarations to not have the
extra space after the '*' character.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove three extern declarations for routines
that don't exist.  Fix a typo in a comment.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

disable the noisy print out.
also use the one the less spare mtrr reg.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

there is a typo in the mask value, need to remove that extra 0,
to avoid 4bit clearing.
Signed-off-by: NYinghal Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove the duplicated copy of these functions.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

otherwise fixed MTRR for family 10h may not be changed.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Loop through mtrr chunk_size and gran_size from 1M to 2G to find out
the optimal value so user does not need to add mtrr_chunk_size and
mtrr_gran_size to the kernel command line.

If optimal value is not found, print out all list to help select less
optimal value.

Add mtrr_spare_reg_nr= so user could set 2 instead of 1, if the card
need more entries.

v2: find the one with more spare entries
v3: fix hole_basek offset
v4: tight the compare between range and range_new
    loop stop with 4g
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Mika Fischer <mika.fischer@zoopnet.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

v9: address format change requests by Ingo
    more case handling in range_to_var_with_hole
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

v2: process hole then end_pfn
    fix update_memory_range with whole cover comparing
Signed-off-by: NYinghai Lu <yinghai.lu@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

converting MTRR layout from continous to discrete, some time could run out of
MTRRs. So add gran_sizek to prevent that by dumpping small RAM piece less than
gran_sizek.

previous trimming only can handle highest_pfn from mtrr to end_pfn from e820.
when have more than 4g RAM installed, there will be holes below 4g. so need to
check ram below 4g is coverred well.

need to be applied after
	[PATCH] x86: mtrr cleanup for converting continuous to discrete layout v7
Signed-off-by: NYinghai Lu <yinghai.lu@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

some BIOS like to use continus MTRR layout, and X driver can not add
WB entries for graphical cards when 4g or more RAM installed.

the patch will change MTRR to discrete.

mtrr_chunk_size= could be used to have smaller continuous block to hold holes.
default is 256m, could be set according to size of graphics card memory.

mtrr_gran_size= could be used to send smallest mtrr block to avoid run out of MTRRs

v2: fix -1 for UC checking
v3: default to disable, and need use enable_mtrr_cleanup to enable this feature
    skip the var state change warning.
    remove next_basek in range_to_mtrr()
v4: correct warning mask.
v5: CONFIG_MTRR_SANITIZER
v6: fix 1g, 2g, 512 aligment with extra hole
v7: gran_sizek to prevent running out of MTRRs.
v8: fix hole_basek caculation caused when removing next_basek
    gran_sizek using when basek is 0.

need to apply
	[PATCH] x86: fix trimming e820 with MTRR holes.
right after this one.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The x86_64 code has centralized the memory setup code in
e820_64.c. This patch copies that approach to i386:

- early_param("mem", ...) parsing is moved from
setup_32.c to e820_32.c.

- setup_memory_map() and finish_e820_parsing() are
factored out from setup_arch(), and declarations
are added to e820_32.h.

- print_memory_map() is made static and removed from
e820_32.h.

- user_defined_memmap is marked as __initdata.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

arch/x86/kernel/cpu/mtrr/generic.c:216:12: warning: symbol 'lo' shadows an earlier one
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we fully commit to returning back to kernel mode from
a trap, zero out the regs->magic value to prevent false
positives during stack backtraces.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The offset to the pt_regs area was wrong, so we weren't
looking at the right location for the magic cookie.

A trap frame is composed of a "struct sparc_stackf" then
a "struct pt_regs", the code was using "struct reg_window"
instead of "struct sparc_stackf".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because of the silly way I set up the initial stack for
new kernel threads, there is a loop at the top of the
stack.

To fix this, properly add another stack frame that is copied
from the parent and terminate it in the child by setting
the frame pointer in that frame to zero.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Whether we sidestep it in init/main.c or not, such situations
will arise again; compiler does generate calls of strcat()
on optimizations, so we really ought to have an out-of-line
version...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... and we have few enough places using the latter to make it
simpler to do search and replace...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want sys/ptrace.h before any includes of linux/ptrace.h and
asm/user.h pulls the latter.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

When a cpu really is stuck in the kernel, it can be often
impossible to figure out which cpu is stuck where.  The
worst case is when the stuck cpu has interrupts disabled.

Therefore, implement a global cpu state capture that uses
SMP message interrupts which are not disabled by the
normal IRQ enable/disable APIs of the kernel.

As long as we can get a sysrq 'y' to the kernel, we can
get a dump.  Even if the console interrupt cpu is wedged,
we can trigger it from userspace using /proc/sysrq-trigger

The output is made compact so that this facility is more
useful on high cpu count systems, which is where this
facility will likely find itself the most useful :)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Add dtbImage.*
* Added zImage.holly
* Folded zImage.coff.lds into zImage.*lds
* Removed some unused zImage.<foo> ignores
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

dtbImage.* and several zImage. targets get created but never cleaned up.

Also, moved zImage to the clean-files line associated with all other image
results (was previously duplicated).
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This removes a CVS keyword that wasn't updated for a long time from a
comment.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replace Redundant Whitelist Entries with the Correct Ones

The ProLiant DL585 G2 and the DL585 G2 are entered reundantly in the
dmi_system_id table. What should have been there are the DL360 and DL380. This
patch simply replaces the redundant entries with the correct entries.
Signed-off-by: NTony Camuso <tony.camuso@hp.com>
Signed-off-by: NPat Schoeller <patrick.schoeller@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>