'hist' triggers allow users to continually aggregate trace events,
which can then be viewed afterwards by simply reading a 'hist' file
containing the aggregation in a human-readable format.

The basic idea is very simple and boils down to a mechanism whereby
trace events, rather than being exhaustively dumped in raw form and
viewed directly, are automatically 'compressed' into meaningful tables
completely defined by the user.

This is done strictly via single-line command-line commands and
without the aid of any kind of programming language or interpreter.

A surprising number of typical use cases can be accomplished by users
via this simple mechanism.  In fact, a large number of the tasks that
users typically do using the more complicated script-based tracing
tools, at least during the initial stages of an investigation, can be
accomplished by simply specifying a set of keys and values to be used
in the creation of a hash table.

The Linux kernel trace event subsystem happens to provide an extensive
list of keys and values ready-made for such a purpose in the form of
the event format files associated with each trace event.  By simply
consulting the format file for field names of interest and by plugging
them into the hist trigger command, users can create an endless number
of useful aggregations to help with investigating various properties
of the system.  See Documentation/trace/events.txt for examples.

hist triggers are implemented on top of the existing event trigger
infrastructure, and as such are consistent with the existing triggers
from a user's perspective as well.

The basic syntax follows the existing trigger syntax.  Users start an
aggregation by writing a 'hist' trigger to the event of interest's
trigger file:

  # echo hist:keys=xxx [ if filter] > event/trigger

Once a hist trigger has been set up, by default it continually
aggregates every matching event into a hash table using the event key
and a value field named 'hitcount'.

To view the aggregation at any point in time, simply read the 'hist'
file in the same directory as the 'trigger' file:

  # cat event/hist

The detailed syntax provides additional options for user control, and
is described exhaustively in Documentation/trace/events.txt and in the
virtual tracing/README file in the tracing subsystem.

Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the infrastructure needed to have the PIDs in set_event_pid to
automatically add PIDs of the children of the tasks that have their PIDs in
set_event_pid. This will also remove PIDs from set_event_pid when a task
exits

This is implemented by adding hooks into the fork and exit tracepoints. On
fork, the PIDs are added to the list, and on exit, they are removed.

Add a new option called event_fork that when set, PIDs in set_event_pid will
automatically get their children PIDs added when they fork, as well as any
task that exits will have its PID removed from set_event_pid.

This works for instances as well.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Use the more common logging method with the eventual goal of removing
pr_warning altogether.

Miscellanea:

 - Realign arguments
 - Coalesce formats
 - Add missing space between a few coalesced formats
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	[kernel/power/suspend.c]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The latency tracer format has a nice column to indicate IRQ state, but
this is not able to tell us about NMI state.

When tracing perf interrupt handlers (which often run in NMI context)
it is very useful to see how the events nest.

Link: http://lkml.kernel.org/r/20160318153022.105068893@infradead.orgSigned-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If tracing contains data and the trace_pipe file is read with sendfile(),
then it can trigger a NULL pointer dereference and various BUG_ON within the
VM code.

There's a patch to fix this in the splice_to_pipe() code, but it's also a
good idea to not let that happen from trace_pipe either.

Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.in

Cc: stable@vger.kernel.org # 2.6.30+
Reported-by: NRabin Vincent <rabin.vincent@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

commit d39cdd20 ("tracing: Make tracer_flags use the right set_flag
callback")  introduces a potential mutex deadlock issue, as it forgets to
free the mutex when allocaing the tracer_flags gets fail.

The issue was found by Dan Carpenter through Smatch static code check tool.

Link: http://lkml.kernel.org/r/1457958941-30265-1-git-send-email-chuhu@redhat.com

Fixes: d39cdd20 ("tracing: Make tracer_flags use the right set_flag callback")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChunyu Hu <chuhu@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When I was updating the ftrace_stress test of ltp. I encountered
a strange phenomemon, excute following steps:

echo nop > /sys/kernel/debug/tracing/current_tracer
echo 0 > /sys/kernel/debug/tracing/options/funcgraph-cpu
bash: echo: write error: Invalid argument

check dmesg:
[ 1024.903855] nop_test_refuse flag set to 0: we refuse.Now cat trace_options to see the result

The reason is that the trace option test will randomly setup trace
option under tracing/options no matter what the current_tracer is.
but the set_tracer_option is always using the set_flag callback
from the current_tracer. This patch adds a pointer to tracer_flags
and make it point to the tracer it belongs to. When the option is
setup, the set_flag of the right tracer will be used no matter
what the the current_tracer is.

And the old dummy_tracer_flags is used for all the tracers which
doesn't have a tracer_flags, having issue to use it to save the
pointer of a tracer. So remove it and use dynamic dummy tracer_flags
for tracers needing a dummy tracer_flags, as a result, there are no
tracers sharing tracer_flags, so remove the check code.

And save the current tracer to trace_option_dentry seems not good as
it may waste mem space when mount the debug/trace fs more than one time.

Link: http://lkml.kernel.org/r/1457444222-8654-1-git-send-email-chuhu@redhat.comSigned-off-by: NChunyu Hu <chuhu@redhat.com>
[ Fixed up function tracer options to work with the change ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

While cleaning the stacktrace code I unintentially changed the skip depth of
trace_buffer_unlock_commit_regs() from 0 to 6. kprobes uses this function,
and with skipping 6 call backs, it can easily produce no stack.

Here's how I tested it:

 # echo 'p:ext4_sync_fs ext4_sync_fs ' > /sys/kernel/debug/tracing/kprobe_events
 # echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
 # cat /sys/kernel/debug/trace
            sync-2394  [005]   502.457060: ext4_sync_fs: (ffffffff81317650)
            sync-2394  [005]   502.457063: kernel_stack:         <stack trace>
            sync-2394  [005]   502.457086: ext4_sync_fs: (ffffffff81317650)
            sync-2394  [005]   502.457087: kernel_stack:         <stack trace>
            sync-2394  [005]   502.457091: ext4_sync_fs: (ffffffff81317650)

After putting back the skip stack to zero, we have:

            sync-2270  [000]   748.052693: ext4_sync_fs: (ffffffff81317650)
            sync-2270  [000]   748.052695: kernel_stack:         <stack trace>
 => iterate_supers (ffffffff8126412e)
 => sys_sync (ffffffff8129c4b6)
 => entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
            sync-2270  [000]   748.053017: ext4_sync_fs: (ffffffff81317650)
            sync-2270  [000]   748.053019: kernel_stack:         <stack trace>
 => iterate_supers (ffffffff8126412e)
 => sys_sync (ffffffff8129c4b6)
 => entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
            sync-2270  [000]   748.053381: ext4_sync_fs: (ffffffff81317650)
            sync-2270  [000]   748.053383: kernel_stack:         <stack trace>
 => iterate_supers (ffffffff8126412e)
 => sys_sync (ffffffff8129c4b6)
 => entry_SYSCALL_64_fastpath (ffffffff8181f0b2)

Cc: stable@vger.kernel.org # v4.4+
Fixes: 73dddbb5 "tracing: Only create stacktrace option when STACKTRACE is configured"
Reported-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Tested-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

tracing_max_lat_fops is used only when TRACER_MAX_TRACE enabled, so also
swith the related code. The related warning with defconfig under x86_64:

    CC      kernel/trace/trace.o
  kernel/trace/trace.c:5466:37: warning: ‘tracing_max_lat_fops’ defined but not used [-Wunused-const-variable]
   static const struct file_operations tracing_max_lat_fops = {
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Since the ring buffer is lockless, there is no need to disable ftrace on
CPU. And no one doing so: after commit 68179686 ("tracing: Remove
ftrace_disable/enable_cpu()") ftrace_cpu_disabled stays the same after
initialization, nothing changes it.
ftrace_cpu_disabled shouldn't be used by any external module since it
disables only function and graph_function tracers but not any other
tracer.

Link: http://lkml.kernel.org/r/1446836846-22239-1-git-send-email-0x7f454c46@gmail.comSigned-off-by: NDmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently tracing_init_dentry() returns -ENODEV when debugfs is not
configured in, which causes tracefs not populated with tracing files and
directories, so we will get an empty directory even after we manually
mount tracefs.

We can make tracing_init_dentry() return NULL if debugfs is not
configured in and can manually mount tracefs. But return -ENODEV
if debugfs is configured in but not initialized or failed to create
automount point as that would break backward compatibility with older
tools.

Link: http://lkml.kernel.org/r/1446797056-11683-1-git-send-email-hello.wjx@gmail.comSigned-off-by: NJiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Both early_enable_events() and apply_trace_boot_options() parse a boot
string that may get parsed later on. They both use strsep() which converts a
comma into a nul character. To still allow the boot string to be parsed
again the same way, the nul character gets converted back to a comma after
the token is processed.

The problem is that these two functions check for an empty parameter (two
commas in a row ",,"), and continue the loop if the parameter is empty, but
fails to place the comma back. In this case, the second parsing will end at
this blank field, and not process fields afterward.

In most cases, users should not have an empty field, but if its going to be
checked, the code might as well be correct.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, the trace_options parameter is only applied in
tracer_alloc_buffers() when global_trace.current_trace is nop_trace,
so a tracer specific option will not be applied even when the specific
tracer is also enabled from kernel command line. For example, the
'func_stack_trace' option can't be enabled with the following kernel
parameter:

  ftrace=function ftrace_filter=kfree trace_options=func_stack_trace

We can enable tracer specific options by simply apply the options again
if the specific tracer is also supplied from command line and started
in register_tracer().

To make trace_boot_options_buf can be parsed again, a comma and a space
is put back if they were replaced by strsep and strstrip respectively.

Also make register_tracer() be __init to access the __init data, and
in fact register_tracer is only called from __init code.

Link: http://lkml.kernel.org/r/1446599669-9294-1-git-send-email-hello.wjx@gmail.comSigned-off-by: NJiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

We don't init iter->started when dumping the ftrace buffer, and there's no
real need to do so - so allow skipping that check if the iter doesn't have
an initialized ->started cpumask.

Link: http://lkml.kernel.org/r/1441385156-27279-1-git-send-email-sasha.levin@oracle.comSigned-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Update instancd_rmdir to use tracefs_remove_recursive instead of
debugfs_remove_recursive.This was left in the transition from debugfs
to tracefs.

Link: http://lkml.kernel.org/r/1445169490-18315-2-git-send-email-hello.wjx@gmail.com

Cc: stable@vger.kernel.org # 4.1+
Fixes: 8434dc93 ("tracing: Convert the tracing facility over to use tracefs")
Signed-off-by: NJiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the tracer options to instances options directory as well. Only add the
options for tracers that are allowed to be enabled by an instance. But note,
that tracer options are global. That is, tracer options enabled in an
instance, also take affect at the top level and in other instances.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Allow instances to have their own options, at least for the core options
(non tracer specific ones). There are a few global options that should not
be added to instances, like enabling of trace_printk, and the sched comm
recording, which do not have a specific trace instance associated to them.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation for the multi buffer instances to have their own trace_flags,
the check in ftrace_trace_stack() needs to test the trace_array descriptor
flag that is for the current event, not the global_trace descriptor.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation of having the multi buffer instances having their own trace
option flags, the trace option files needs a way to not only pass in the
flag they represent, but also the trace_array descriptor.

A new field is added to the trace_array descriptor called trace_flags_index,
which is a 32 byte character array representing a bit. This array is simply
filled with the index of the array, where

  index_array[n] = n;

Then the address of this array is passed to the file callbacks instead of
the index of the flag index. Then to retrieve both the flag index and the
trace_array descriptor:

  data is the passed in argument.

  index = *(unsigned char *)data;

  data -= index;

  /* Now data points to the address of the array in the trace_array */

  tr = container_of(data, struct trace_array, trace_flags_index);
Suggested-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.

There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The sleep-time and graph-time options are only for the function graph tracer
and are not used by anything else. As tracer options are now visible when
the tracer is not activated, its better to move the function graph specific
tracer options into the function graph tracer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In the effort to move the global trace_flags to the tracing instances, the
direct access to trace_flags must be removed from trace_printk.c

Instead, add a new trace_printk_enabled boolean that is set by a new access
function trace_printk_control(), that will enable or disable trace_printk.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a enum that denotes the last bit of the trace_flags and have a
BUILD_BUG_ON(last_bit > 32).

If we add more bits than we have in trace_flags, the kernel wont build.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are options that are unique to a specific tracer (like function and
function graph). Currently, these options are only visible in the options
directory when the tracer is enabled.

This has been a pain, especially for something like the func_stack_trace
option that if used inappropriately, could bring the system to a crawl. But
the only way to see it, is to enable the function tracer.

For example, if one had done:

 # cd /sys/kernel/tracing
 # echo __schedule > set_ftrace_filter
 # echo 1 > options/func_stack_trace
 # echo function > current_tracer

The __schedule call will be traced and a stack trace will also be recorded
there. Now when you were done, you may do...

 # echo nop > current_tracer
 # echo > set_ftrace_filter

But you forgot to disable the func_stack_trace. The only way to disable it
is to re-enable function tracing first. If you do not add a filter to
set_ftrace_filter and just do:

 # echo function > current_tracer

Now you would be performing a stack trace on *every* function! On some
systems, that causes a live lock. Others may take a few minutes to fix your
mistake.

Having the func_stack_trace option visible allows you to check it and
disable it before enabling the funtion tracer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Only create the stacktrace trace option when CONFIG_STACKTRACE is
configured.

Cleaned up the ftrace_trace_stack() function call a little to allow better
encapsulation of the stacktrace trace flag.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When the function tracer is not compiled in, do not create the option files
for it.

Fix up both the sched_wakeup and irqsoff tracers to handle the change.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Do not create fuction graph tracer options when function graph tracer is not
even compiled in.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Use a cute little macro trick to keep the names of the trace flags file
guaranteed to match the corresponding masks.

The macro TRACE_FLAGS is defined as a serious of enum names followed by
the string name of the file that matches it. For example:

 #define TRACE_FLAGS						\
		C(PRINT_PARENT,		"print-parent"),	\
		C(SYM_OFFSET,		"sym-offset"),		\
		C(SYM_ADDR,		"sym-addr"),		\
		C(VERBOSE,		"verbose"),

Now we can define the following:

 #undef C
 #define C(a, b) TRACE_ITER_##a##_BIT
 enum trace_iterator_bits { TRACE_FLAGS };

The above creates:

 enum trace_iterator_bits {
	TRACE_ITER_PRINT_PARENT_BIT,
	TRACE_ITER_SYM_OFFSET_BIT,
	TRACE_ITER_SYM_ADDR_BIT,
	TRACE_ITER_VERBOSE_BIT,
 };

Then we can redefine C as:

 #undef C
 #define C(a, b) TRACE_ITER_##a = (1 << TRACE_ITER_##a##_BIT)
 enum trace_iterator_flags { TRACE_FLAGS };

Which creates:

 enum trace_iterator_flags {
	TRACE_ITER_PRINT_PARENT	= (1 << TRACE_ITER_PRINT_PARENT_BIT),
	TRACE_ITER_SYM_OFFSET	= (1 << TRACE_ITER_SYM_OFFSET_BIT),
	TRACE_ITER_SYM_ADDR	= (1 << TRACE_ITER_SYM_ADDR_BIT),
	TRACE_ITER_VERBOSE	= (1 << TRACE_ITER_VERBOSE_BIT),
 };

Then finally we can create the list of file names:

 #undef C
 #define C(a, b) b
 static const char *trace_options[] = {
	TRACE_FLAGS
	NULL
 };

Which creates:
 static const char *trace_options[] = {
	"print-parent",
	"sym-offset",
	"sym-addr",
	"verbose",
	NULL
 };

The importance of this is that the strings match the bit index.

	trace_options[TRACE_ITER_SYM_ADDR_BIT] == "sym-addr"
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There was a time where the function tracing would disable interrupts unless
specifically told not to, where it would only disable preemption. With the
new lockless code, the function tracing never disalbes interrupts and just
uses disabling of preemption. Remove the option "ftrace_preempt" as it does
nothing anyway.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In order to facilitate making all tracer options visible even when the
tracer is not active, we need to get rid of duplicate options. Any option
that is shared between multiple tracers really should be a main option.

As the wakeup and irqsoff tracers both use the "display-graph" option, and
use it exactly the same way, move that option from the tracer options to the
main options and consolidate them.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_trace_stack() is not called outside of trace.c. Make it a static
function.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation for having trace options be per instance, the trace_array
needs to be passed to the trace_buffer_unlock_commit(). The
trace_event_buffer_lock_reserve() already passes in the trace_event_file
where the trace_array can be derived from.

Also added a "__init" to the boot up test event plus function tracing
function function_test_events_call().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

trace_current_buffer_lock_reserve() is not used by anything. Might as well
get rid of it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_trace_stack_regs() is used in only one place, and because that is
such a simple function, just move its code into the location that it was
used in (trace_buffer_unlock_commit_regs()).
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In ftrace_dump, for disabling buffer, iter.tr->trace_buffer.data is used.
But for enabling, iter.trace_buffer->data is used.
Even though, both point to same buffer, for readability, same convention
should be used.

Link: http://lkml.kernel.org/r/1434972306-20043-1-git-send-email-umesh.t@samsung.comSigned-off-by: NUmesh Tiwari <umesh.t@samsung.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently exception occures due to access beyond buffer_iter
range while using index of cpu bigger than num_possible_cpus().
Below there is an example for such exception when we use
cpus 0,1,16,17.

In order to fix buffer allocation size for non-continuous cpu ids
we allocate according to the max cpu id and not according to the
amount of possible cpus.

Example:
  $ cat /sys/kernel/debug/tracing/per_cpu/cpu1/trace
  Path: /bin/busybox
  CPU: 0 PID: 82 Comm: cat Not tainted 4.0.0 #29
  task: 80734c80 ti: 80012000 task.ti: 80012000

  [ECR   ]: 0x00220100 => Invalid Read @ 0x00000000 by insn @ 0x800abafc
  [EFA   ]: 0x00000000
  [BLINK ]: ring_buffer_read_finish+0x24/0x64
  [ERET  ]: rb_check_pages+0x20/0x188
  [STAT32]: 0x00001a00 :
  BTA: 0x800abafc  SP: 0x80013f0c  FP: 0x57719cf8
  LPS: 0x200036b4 LPE: 0x200036b8 LPC: 0x00000000
  r00: 0x8002aca0 r01: 0x00001606 r02: 0x00000000
  r03: 0x00000001 r04: 0x00000000 r05: 0x804b4954
  r06: 0x00030003 r07: 0x8002a260 r08: 0x00000286
  r09: 0x00080002 r10: 0x00001006 r11: 0x807351a4
  r12: 0x00000001

  Stack Trace:
    rb_check_pages+0x20/0x188
    ring_buffer_read_finish+0x24/0x64
    tracing_release+0x4e/0x170
    __fput+0x62/0x158
    task_work_run+0xa2/0xd4
    do_notify_resume+0x52/0x7c
    resume_user_mode_begin+0xdc/0xe0

Link: http://lkml.kernel.org/r/1433835155-6894-3-git-send-email-gilf@ezchip.comSigned-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NGil Fruchter <gilf@ezchip.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Use kcalloc for allocating an array instead of kzalloc with multiply,
as that is what kcalloc is used for.
Found with checkpatch.

Link: http://lkml.kernel.org/r/1433835155-6894-2-git-send-email-gilf@ezchip.comSigned-off-by: NGil Fruchter <gilf@ezchip.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The FTRACE_EVENT_FL_* flags are flags to
do with the trace_event files in the tracefs directory. They are not related
to function tracing. Rename them to a more descriptive name.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structures ftrace_event_call and
ftrace_event_class have nothing to do with the function hooks, and are
really trace_event structures. Rename ftrace_event_* to trace_event_*.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structure ftrace_event_file is really
about trace events and not "ftrace". Rename it to trace_event_file.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>