Just define a range of fs specific flags and use that in gfs2 instead of
exposing this internal flag globally.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Inline data is fundamentally different from our normal mapped case in that
it doesn't even have a block address.  So instead of having a flag for it
it should be an entirely separate iomap range type.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

That way file systems don't have to go spotting for non-contiguous pages
and work around them.  It also kicks off I/O earlier, allowing it to
finish earlier and reduce latency.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

We never return an error, so switch to returning an unsigned int.  Most
callers already did implicit casts to an unsigned type, and the one that
didn't can be simplified now.
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

It counts the number of pages acted on, so name it nr_pages to make that
obvious.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

For the upcoming removal of buffer heads in XFS we need to keep track of
the number of outstanding writeback requests per page.  For this we need
to know if bio_add_page merged a region with the previous bvec or not.
Instead of adding additional arguments this refactors bio_add_page to
be implemented using three lower level helpers which users like XFS can
use directly if they care about the merge decisions.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

generic/475 fired an assert failure just after the filesystem was
shut down:

XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_refcount.c, line: 182
.....
Call Trace:
 xfs_refcount_insert+0x151/0x190
 xfs_refcount_adjust_extents.constprop.11+0x9c/0x470
 xfs_refcount_adjust.constprop.10+0xb0/0x270
 xfs_refcount_finish_one+0x25a/0x420
 xfs_trans_log_finish_refcount_update+0x2a/0x40
 xfs_refcount_update_finish_item+0x35/0xa0
 xfs_defer_finish+0x15e/0x4d0
 xfs_reflink_remap_extent+0x1bc/0x610
 xfs_reflink_remap_blocks+0x6e/0x280
 xfs_reflink_remap_range+0x311/0x530
 vfs_clone_file_range+0x119/0x200
 ....

If xfs_btree_insert() returns an error, the corruption check fires
instead of passing the error back the caller. The corruption check
should be after we've checked for an error, not before, thereby
avoiding assert failures if the filesystem shuts down during a
refcount btree record insert.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

All the realtime allocation functions deal with space on the rtdev in
units of realtime extents.  However, struct xfs_rtalloc_rec confusingly
uses the word 'block' in the name, even though they're really extents.

Fix the naming problem and fix all the unit handling problems in the two
existing users.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NBill O'Donnell <billodo@redhat.com>

Strengthen the rtalloc range query checks to make sure that the keys do
not run off the end of the realtime device inappropriately.  Note that
the query range functions require units of rt extents, not blocks,
despite the type name.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NBill O'Donnell <billodo@redhat.com>

The xfs_rtbuf_get function should check the block mapping it gets back
from bmapi_read.  If there are no mappings or the mapping isn't a real
extent, we should return -EFSCORRUPTED rather than trying to read a
garbage value.  We also require realtime bitmap blocks to be real,
written allocations.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NBill O'Donnell <billodo@redhat.com>

xfs_rtword_t is used for bit manipulations in the realtime bitmap file.
Since we're performing bit shifts with this type, we don't want sign
extension and we don't want to be left shifting negative quantities
because that's undefined behavior.

This also shuts up these UBSAN warnings:
UBSAN: Undefined behaviour in fs/xfs/libxfs/xfs_rtbitmap.c:833:48
signed integer overflow:
-2147483648 - 1 cannot be represented in type 'int'
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NBill O'Donnell <billodo@redhat.com>

The function return values are confusing with the way the function is
named. We expect a true or false return value but it actually returns
0/-errno.  This makes the code very confusing. Changing the return values
to return a bool where if DAX is supported then return true and no DAX
support returns false.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Change bdev_dax_supported so it takes a bdev parameter.  This enables
multi-device filesystems like xfs to check that a dax device can work for
the particular filesystem.  Once that's in place, actually fix all the
parts of XFS where we need to be able to distinguish between datadev and
rtdev.

This patch fixes the problem where we screw up the dax support checking
in xfs if the datadev and rtdev have different dax capabilities.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
[rez: Re-added __bdev_dax_supported() for !CONFIG_FS_DAX cases]
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>

If one of the backup superblocks is found to differ seriously from
superblock 0, write out a fresh copy from the in-core sb.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Add a helper routine to attach quota information to inodes that are
about to undergo repair.  If that fails, we need to schedule a
quotacheck for the next mount but allow the corrupted metadata repair to
continue.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Add a helper function to help us recover btree roots from the rmap data.
Callers pass in a list of rmap owner codes, buffer ops, and magic
numbers.  We iterate the rmap records looking for owner matches, and
then read the matching blocks to see if the magic number & uuid match.
If so, we then read-verify the block, and if that passes then we retain
a pointer to the block with the highest level, assuming that by the end
of the call we will have found the root.  This will be used to reset the
AGF/AGI btree root fields during their rebuild procedures.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Now that we've plumbed in the ability to construct a list of dead btree
blocks following a repair, add more helpers to dispose of them.  This is
done by examining the rmapbt -- if the btree was the only owner we can
free the block, otherwise it's crosslinked and we can only remove the
rmapbt record.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Add some helpers to assemble a list of fs block extents.  Generally,
repair functions will iterate the rmapbt to make a list (1) of all
extents owned by the nominal owner of the metadata structure; then they
will iterate all other structures with the same rmap owner to make a
list (2) of active blocks; and finally we have a subtraction function to
subtract all the blocks in (2) from (1), with the result that (1) is now
a list of blocks that were owned by the old btree and must be disposed.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Add a pair of helper functions to allocate and initialize fresh btree
roots.  The repair functions will use these as part of recreating
corrupted metadata.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>

For repairs, we need to reserve at least as many blocks as we think
we're going to need to rebuild the data structure, and we're going to
need some helpers to roll transactions while maintaining locks on the AG
headers so that other threads cannot wander into the middle of a repair.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>

Grab and hold the per-AG data across a scrub run whenever relevant.
This helps us avoid repeated trips through rcu and the radix tree
in the repair code.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Use new return type vm_fault_t for fault handlers.
Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

In commit a6a781a5 ("xfs: have buffer verifier functions
report failing address") the bad magic number return was ported
incorrectly.

Fixes: a6a781a5
Reported-by: syzbot+08ab33be0178b76851c8@syzkaller.appspotmail.com
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>

In inode_init_always(), we clear the inode mapping flags, which clears
any retained error (AS_EIO, AS_ENOSPC) bits.  Unfortunately, we do not
also clear wb_err, which means that old mapping errors can leak through
to new inodes.

This is crucial for the XFS inode allocation path because we recycle old
in-core inodes and we do not want error state from an old file to leak
into the new file.  This bug was discovered by running generic/036 and
generic/047 in a loop and noticing that the EIOs generated by the
collision of direct and buffered writes in generic/036 would survive the
remount between 036 and 047, and get reported to the fsyncs (on
different files!) in generic/047.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

generic_swapfile_activate() doesn't allow holes, so we should be
consistent here. This is also a bit safer: if the user creates a
swapfile with, say, truncate -s $SIZE followed by mkswap, they should
really get an error and not much less swap space than they expected.
swapon(8) will error out before calling swapon(2) if the file has holes,
anyways.

Fixes: 9d93388b0afe ("iomap: add a swapfile activation function")
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Currently, for an invalid swap file, we print the same error message
regardless of the reason. This isn't very useful for an admin, who will
likely want to know why exactly they can't use their swap file. So,
let's add specific error messages for each reason, and also move the
bdev check after the flags checks, since the latter are more
fundamental.
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The GET ioctl is trivial, just return the current label.

The SET ioctl is more involved:
It transactionally modifies the superblock to write a new filesystem
label to the primary super.

A new variant of xfs_sync_sb then writes the superblock buffer
immediately to disk so that the change is visible from userspace.

It then invalidates any page cache that userspace might have previously
read on the block device so that i.e. blkid can see the change
immediately, and updates all secondary superblocks as userspace relable
does.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
[darrick: use dchinner's new xfs_update_secondary_sbs function]
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

This retains 256 chars as the maximum size through the interface, which
is the btrfs limit and AFAIK exceeds any other filesystem's maximum
label size.

This just copies the ioctl for now and leaves it in place for btrfs
for the time being.  A later patch will allow btrfs to use the new
common ioctl definition, but it may be sent after this is merged.

(Note, Reviewed-by's were originally given for the combined vfs+btrfs
patch, some license taken here.)
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Growfs currently manually codes the extension of the last AG in a
filesytem during the growfs process. Factor that out of the growfs
code and move it into libxfs along with teh rest of the AG header
modification code.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

So it can be shared with userspace (e.g. mkfs) easily.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Right now we wait until we've committed changes to the primary
superblock before we initialise any of the new secondary
superblocks. This means that if we have any write errors for new
secondary superblocks we end up with garbage in place rather than
zeros or even an "in progress" superblock to indicate a grow
operation is being done.

To ensure we can write the secondary superblocks, initialise them
earlier in the same loop that initialises the AG headers. We stamp
the new secondary superblocks here with the old geometry, but set
the "sb_inprogress" field to indicate that updates are being done to
the superblock so they cannot be used.  This will result in the
secondary superblock fields being updated or triggering errors that
will abort the grow before we commit any permanent changes.

This also means we can change the update mechanism of the secondary
superblocks.  We know that we are going to wholly overwrite the
information in the struct xfs_sb in the buffer, so there's no point
reading it from disk. Just allocate an uncached buffer, zero it in
memory, stamp the new superblock structure in it and write it out.
If we fail to write it out, then we'll leave the existing sb (old or
new w/ inprogress) on disk for repair to deal with later.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

This happens after all the transactions to update the superblock
occur, and errors need to be handled slightly differently. Seperate
out the code into it's own function, and clean up the error goto
stack in the core growfs code as it is now much simpler.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

When growfs changes the imaxpct value of the filesystem, it runs
through all the "change size" growfs code, whether it needs to or
not. Separate out changing imaxpct into it's own function and
transaction to simplify the rest of the growfs code.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

There's still more cookie cutter code in setting up each AG header.
Separate all the variables into a simple structure and iterate a
table of header definitions to initialise everything.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Cookie cutter code, easily factored.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

We currently write all new AG headers synchronously, which can be
slow for large grow operations. All we really need to do is ensure
all the headers are on disk before we run the growfs transaction, so
convert this to a buffer list and a delayed write operation. We
block waiting for the delayed write buffer submission to complete,
so this will fulfill the requirement to have all the buffers written
correctly before proceeding.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The intialisation of new AG headers is mostly common with the
userspace mkfs code and growfs in the kernel, so start factoring it
out so we can move it to libxfs and use it in both places.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

For the new growfs work, we want to ensure that we serialise
secondary superblock updates with other operations (e.g. scrub)
correctly, but we don't want to cache the buffers for long term
reuse. We need cached buffers for serialisation, however.

To solve this, introduce a "oneshot" buffer which will be marshalled
through the cache but then released once the last current reference
goes away. If the buffer is already cached, then we ignore the
"one-shot" behaviour and leave the buffer in the state it was prior
to the one-shot command being run. This means we don't perturb
either the working set or existing cached buffer state by a one-shot
operation.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Plumb in the pieces necessary to make the "scrub" subfunction of
the scrub ioctl actually work.  This means that we make the IFLAG_REPAIR
flag to the scrub ioctl actually do something, and we add an errortag
knob so that xfstests can force the kernel to rebuild a metadata
structure even if there's nothing wrong with it.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>