- 23 2月, 2012 18 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Reported-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
This default console mechanism is not used if the console is selected by command line (console= parameter). Dropping this will simplify the compilation of multiple SoC in the same kernel image. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
This variable spread on every SoC that is using the atmel_serial.c driver can be included directly into the latter. This will allow to compile multiple soc in the same kernel. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: kernel@avr32linux.org
-
On at91sam9260 and at91sam9g20 the SRAM banks are mirrored. We can merge them together to be able to have bigger and continuous internal RAM. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Remove at91_sys_read/write() from io.h file. This function is not used anymore and was a stopper on the way to single zImage kernel for AT91. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
The GPBR registers are used for storing RTC values. The GPBR registers to use are now provided using standard resource entry. The array is filled in SoC specific code. rtc-at91sam9 RTT as RTC driver is modified to retrieve this information. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: rework resources assignment] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: NRyan Mallon <rmallon@gmail.com>
-
For the RTT as RTC driver rtc-at91sam9, the platform_device structure is filled during SoC initialization. This will allow to convert this RTC driver as a standard platform driver. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: NRyan Mallon <rmallon@gmail.com>
-
由 Nicolas Ferre 提交于
We move the assignment of values of register out of the seq_printf() calls: It is obviously more readable. Reported-by: NRyan Mallon <rmallon@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
This will allow to have all SoC in one kernel image. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
This cleanup is done to allow to have multiple SoC in the same image. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Change slow_clock()/at91_slow_clock() prototype to accept the PMC base address and one or two RAM controller addresses by parameters. The r0, r1 and r2 registers are used differently and preserved during function call. Those values are defined in pm.c and slow_clock() function is called from there with its new parameters. This will allow to have a soc independent pm_slowclock. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Ached-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
This patch will give a name to ARM registers in the assembly source code. It is done to simplify the code reading and the passing of parameters to functions. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Remove the unnecessary (void) cast on at91_st_read() return value. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NRyan Mallon <rmallon@gmail.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: NRyan Mallon <rmallon@gmail.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: NRyan Mallon <rmallon@gmail.com> Cc: linux-usb@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 2月, 2012 2 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Remove duplicated at91sam9xxxx_idle() functions introduced by commit c9dfafba "ARM: mach-at91: move special idle code out of line". Replace by a generic at91sam9_idle() function in setup.c common location. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 05 2月, 2012 2 次提交
-
-
由 Paul Gortmaker 提交于
Upstream commit d1fce9c1 "ARM: restart: bcmring: use new restart hook" breaks building of this platform, since what used to be the last field of the MACHINE_START/END block didn't have a trailing comma. Once another field was added below, we get: arch/arm/mach-bcmring/arch.c:198: error: request for member 'restart' in something not a structure or union Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NJiandong Zheng <jdzheng@broadcom.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 JD Zheng 提交于
Remove BCMRING DMA map code which is no longer used. This also fixes a build error with dma.c introduced by bfcd2ea6. Signed-off-by: NJiandong Zheng <jdzheng@broadcom.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 03 2月, 2012 18 次提交
-
-
由 Will Deacon 提交于
__kuser_cmpxchg64 has a return path using bx lr to get back to the caller. This is actually ok since the code in question is predicated on CONFIG_CPU_32v6K, but for the sake of consistency using the usr_ret macro is probably better. Acked-by: NDave Martin <dave.martin@linaro.org> Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Ferre 提交于
Device tree include file for the AT91SAM9x5 SoC family. An additional .dtsi file is created to describe the generic SAM9x5 CPU Module (CM). Device tree source files for each Evaluation Kit that are using the generic CPU Module and the carrier board. The selection of available peripherals is done in this .dts file. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Dan Liang 提交于
Add at91sam9x5.c SoC file: Define clock resources and some initialization code. Signed-off-by: NDan Liang <dan.liang@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Nicolas Ferre 提交于
Kconfig and Makefile entries for SAM9x5 family. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Several changes to PMC have to be managed for adding this support: - alternate prescaler location for both MCKR and PCKR - alternate CSS length for PCKR - added cpu_is_at91sam9x5() to functional switches - manage UTMI bias like sam9g45 chip family Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Nicolas Ferre 提交于
Add at91sam9x5 chips family support in PMC header file: Alternate prescaler location and CSS lenght for PCKR is added. The new Peripheral Control Register management is added. Protection mode register is modified to complete its management. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Dan Liang 提交于
Add the definitions of peripheral and system registers for sam9x5 chips family. Signed-off-by: NDan Liang <dan.liang@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Maxim Osipov 提交于
This patch enables external RTC support on AT91 Flexibity board. Signed-off-by: NMaxim Osipov <maxim.osipov@gmail.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josh Wu 提交于
This patch adds: - ov2640 sensor in at91sam9m10g45ek board - support to use PCK as ISI_MCK. PCK's parent is managed at SoC level, e.g. at91sam9g45_devices.c Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Josh Wu 提交于
Add parameter and change existing call in at91sam9263_devices.c. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Hong Xu 提交于
User will use the newly added field 'correction_cap' and 'sector_size' to pass PMECC parameters to driver. Signed-off-by: NHong Xu <hong.xu@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Device tree support on at91sam9g45 family SoC. Only call platform_device_register() if no dma-controller node is found in device tree. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Nicolas Ferre 提交于
DMA controller can deduce its configuration data from the platform. Remove the platform data and match device types with the compatible ones. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Daniel Lezcano 提交于
This patch groups the self-refresh on/cpu_do_idle/self-refresh off into a single 'standby' function. The standby routine for rm9200 has been turned into an asm routine to have a better control of the self refresh and to prevent a memory access when running this code. Draining the write buffer is done automatically when switching for the self refresh on sam9, so the instruction is added to the rm9200 only. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Daniel Lezcano 提交于
All the "wait_for_interrupt" definition are aliases to cpu_do_idle. Only the rm9200 has an asm routine to switch to wfi. But the cpu_do_idle for this platform has exactly the same asm routine. arch/arm/mm/proc-arm920.S .. ENTRY(cpu_arm920_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt .. Then it is safe to invoke cpu_do_idle for this platform. As all the wait_for_interrupts are definition for cpu_do_idle, let's remove it and replace its invokation by cpu_do_idle. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Daniel Lezcano 提交于
Add the header and define the macro to prevent multiple inclusion like the others headers. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Daniel Lezcano 提交于
This patch is mindless and does only fix the line length. The purpose is to facilitate the review of the next patches. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Following removal announce and addition to feature-removal-schedule.txt, here is the actual source code deletion for Atmel CAP9 family. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-