- 11 11月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
The IRQ core code will take care of disabling and reenabling interrupts over suspend resume automatically, therefore we do not need to do this in the Xen event channel code. The only exception is those event channels marked IRQF_NO_SUSPEND which the IRQ core ignores. We must unmask these ourselves, taking care to obey the current IRQ_DISABLED status. Failure check for IRQ_DISABLED leads to enabling polled only event channels, such as that associated with the pv spinlocks, which must never be enabled: [ 21.970432] ------------[ cut here ]------------ [ 21.970432] kernel BUG at arch/x86/xen/spinlock.c:343! [ 21.970432] invalid opcode: 0000 [#1] SMP [ 21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate [ 21.970432] Modules linked in: [ 21.970432] [ 21.970432] Pid: 0, comm: swapper Not tainted (2.6.32.24-x86_32p-xen-01034-g787c727 #34) [ 21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3 [ 21.970432] EIP is at dummy_handler+0x3/0x7 [ 21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000 [ 21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10 [ 21.970432] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 [ 21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000) [ 21.970432] Stack: [ 21.970432] dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001 [ 21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284 [ 21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90 [ 21.970432] Call Trace: [ 21.970432] [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122 [ 21.970432] [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55 [ 21.970432] [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f [ 21.970432] [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30 [ 21.970432] [<c1030d47>] ? xen_do_upcall+0x7/0xc [ 21.970432] [<c102007b>] ? apic_reg_read+0xd3/0x22d [ 21.970432] [<c1002227>] ? hypercall_page+0x227/0x1005 [ 21.970432] [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14 [ 21.970432] [<c102da7c>] ? check_events+0x8/0xc [ 21.970432] [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1 [ 21.970432] [<c105e485>] ? finish_task_switch+0x62/0xba [ 21.970432] [<c14e3f84>] ? schedule+0x808/0x89d [ 21.970432] [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22 [ 21.970432] [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162 [ 21.970432] [<c102f43a>] ? cpu_idle+0x6d/0x6f [ 21.970432] [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf [ 21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \ c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \ eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15 [ 21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10 [ 21.970432] ---[ end trace c0b71f7e12cf3011 ]--- Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 23 10月, 2010 12 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Use the console hypercalls for dom0 console. [ Impact: Add Xen dom0 console ] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Qing He 提交于
Implement xen_create_msi_irq to create an msi and remap it as pirq. Use xen_create_msi_irq to implement an initial domain specific version of setup_msi_irqs. Signed-off-by: NQing He <qing.he@intel.com> Signed-off-by: NYunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jeremy Fitzhardinge 提交于
Implement xen_register_gsi to setup the correct triggering and polarity properties of a gsi. Implement xen_register_pirq to register a particular gsi as pirq and receive interrupts as events. Call xen_setup_pirqs to register all the legacy ISA irqs as pirqs. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
Map MSIs into pirqs, writing 0 in the MSI vector data field and the pirq number in the MSI destination id field. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
Disable pcifront when running on HVM: it is meant to be used with pv guests that don't have PCI bus. Use acpi_register_gsi_xen_hvm to remap GSIs into pirqs. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
xen_hvm_register_pirq allows the kernel to map a GSI into a Xen pirq and receive the interrupt as an event channel from that point on. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
Use PHYSDEVOP_get_nr_pirqs to get the maximum number of pirqs from xen. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
PHYSDEVOP_map_pirq might return a pirq different from what we asked if we are running as an HVM guest, so we need to be able to support pirqs that are different from linux irqs. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Ian Campbell 提交于
* Fix bitmask formatting on 64 bit by specifying correct field widths. * Output both global and local masked and pending information. * Indicate in list of pending interrupts whether they are pending in the L2, masked globally and/or masked locally. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Make sure the irq is set up before binding a virq event channel to it. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Ian Campbell 提交于
All event channels startbound to VCPU 0 so ensure that cpu_evtchn_mask is initialised to reflect this. Otherwise there is a race after registering an event channel but before the affinity is explicitly set where the event channel can be delivered. If this happens then the event channel remains pending in the L1 (evtchn_pending) array but is cleared in L2 (evtchn_pending_sel), this means the event channel cannot be reraised until another event channel happens to trigger the same L2 entry on that VCPU. sizeof(cpu_evtchn_mask(0))==sizeof(unsigned long*) which is not correct, and causes only the first 32 or 64 event channels (depending on architecture) to be initially bound to VCPU0. Use sizeof(struct cpu_evtchn_s) instead. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: stable@kernel.org
-
由 Jeremy Fitzhardinge 提交于
Change event delivery to: - mask+clear event in the upcall function - use handle_fasteoi_irq as the handler - unmask in the eoi function (and handle migration) Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 19 10月, 2010 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
Thomas Gleixner cleaned up event handling to use the sparse_irq handling, but the xen-pcifront patches utilized the old mechanism. This fixes them to work with sparse_irq handling. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 18 10月, 2010 9 次提交
-
-
由 Alex Nixon 提交于
The frontend stub lives in arch/x86/pci/xen.c, alongside other sub-arch PCI init code (e.g. olpc.c). It provides a mechanism for Xen PCI frontend to setup/destroy legacy interrupts, MSI/MSI-X, and PCI configuration operations. [ Impact: add core of Xen PCI support ] [ v2: Removed the IOMMU code and only focusing on PCI.] [ v3: removed usage of pci_scan_all_fns as that does not exist] [ v4: introduced pci_xen value to fix compile warnings] [ v5: squished fixes+features in one patch, changed Reviewed-by to Ccs] [ v7: added Acked-by] Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Qing He <qing.he@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org
-
由 Konrad Rzeszutek Wilk 提交于
In driver/xen/events.c, whether bind_pirq is shareable or not is determined by desc->action is NULL or not. But in __setup_irq, startup(irq) is invoked before desc->action is assigned with new action. So desc->action in startup_irq is always NULL, and bind_pirq is always not shareable. This results in pt_irq_create_bind failure when passthrough a device which shares irq to other devices. This patch doesn't use probing_irq to determine if pirq is shareable or not, instead set shareable flag in irq_info according to trigger mode in xen_allocate_pirq. Set level triggered interrupts shareable. Thus use this flag to set bind_pirq flag accordingly. [v2: arch/x86/xen/pci.c no more, so file skipped] Signed-off-by: NWeidong Han <weidong.han@intel.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
The 'xen_poll_irq_timeout' provides a method to pass in the poll timeout for IRQs if requested. We also export those two poll functions as Xen PCI fronted uses them. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Konrad Rzeszutek Wilk 提交于
In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the find_unbound_irq started looking around 256 for open IRQs and up. IRQs from 0 to 255 were reserved for PCI devices. Previous to this patch, the 'find_unbound_irq' started looking at get_nr_hw_irqs() number. For privileged domain where the ACPI information is available that returns the upper-bound of what the GSIs. For non-privileged PV domains, where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16). With PCI passthrough enabled, and with PCI cards that have IRQs pinned to a higher number than 16 we collide with previously allocated IRQs. Specifically the PCI IRQs collide with the IPI's for Xen functions (as they are allocated earlier). For example: 00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) ... Interrupt: pin A routed to IRQ 18 [root@localhost ~]# cat /proc/interrupts | head CPU0 CPU1 CPU2 16: 38186 0 0 xen-dyn-virq timer0 17: 149 0 0 xen-dyn-ipi spinlock0 18: 962 0 0 xen-dyn-ipi resched0 and when the USB controller is loaded, the kernel reports: IRQ handler type mismatch for IRQ 18 current handler: resched0 One way to fix this is to reverse the logic when looking for un-used IRQ numbers and start with the highest available number. With that, we would get: CPU0 CPU1 CPU2 ... snip .. 292: 35 0 0 xen-dyn-ipi callfunc0 293: 3992 0 0 xen-dyn-ipi resched0 294: 224 0 0 xen-dyn-ipi spinlock0 295: 57183 0 0 xen-dyn-virq timer0 NMI: 0 0 0 Non-maskable interrupts .. snip .. And interrupts for PCI cards are now accessible. This patch also includes the fix, found by Ian Campbell, titled "xen: fix off-by-one error in find_unbound_irq." [v2: Added an explanation in the code] [v3: Rebased on top of tip/irq/core] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Sometimes cpu_evtchn_mask_p can get used early, before it has been allocated. Statically initialize it with an initdata version to catch any early references. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Gerd Hoffmann 提交于
Impact: cleanup Make pirq show useful information in /proc/interrupts [v2: Removed the parts for arch/x86/xen/pci.c ] Signed-off-by: NGerd Hoffmann <kraxel@xeni.home.kraxel.org> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jeremy Fitzhardinge 提交于
Dynamically allocate the irq_info and evtchn_to_irq arrays, so that 1) the irq_info array scales to the actual number of possible irqs, and 2) we don't needlessly increase the static size of the kernel when we aren't running under Xen. Derived on patch from Mike Travis <travis@sgi.com>. [Impact: reduce memory usage ] [v2: Conflict in drivers/xen/events.c: Replaced alloc_bootmen with kcalloc ] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Impact: preserve compat with native Reserve the lower irq range for use for hardware interrupts so we can identity-map them. [v2: Rebased on top tip/irq/core] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jeremy Fitzhardinge 提交于
A privileged PV Xen domain can get direct access to hardware. In order for this to be useful, it must be able to get hardware interrupts. Being a PV Xen domain, all interrupts are delivered as event channels. PIRQ event channels are bound to a pirq number and an interrupt vector. When a IO APIC raises a hardware interrupt on that vector, it is delivered as an event channel, which we can deliver to the appropriate device driver(s). This patch simply implements the infrastructure for dealing with pirq event channels. [ Impact: integrate hardware interrupts into Xen's event scheme ] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 12 10月, 2010 1 次提交
-
-
由 Thomas Gleixner 提交于
There seems to be more cleanups possible, but that's left to the xen experts :) Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
-
- 25 8月, 2010 2 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Xen events are logically edge triggered, as Xen only calls the event upcall when an event is newly set, but not continuously as it remains set. As a result, use handle_edge_irq rather than handle_level_irq. This has the important side-effect of fixing a long-standing bug of events getting lost if: - an event's interrupt handler is running - the event is migrated to a different vcpu - the event is re-triggered The most noticable symptom of these lost events is occasional lockups of blkfront. Many thanks to Tom Kopec and Daniel Stodden in tracking this down. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Tom Kopec <tek@acm.org> Cc: Daniel Stodden <daniel.stodden@citrix.com> Cc: Stable Kernel <stable@kernel.org>
-
由 Jeremy Fitzhardinge 提交于
IPIs and VIRQs are inherently per-cpu event types, so treat them as such: - use a specific percpu irq_chip implementation, and - handle them with handle_percpu_irq This makes the path for delivering these interrupts more efficient (no masking/unmasking, no locks), and it avoid problems with attempts to migrate them. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
-
- 30 7月, 2010 1 次提交
-
-
由 Stefano Stabellini 提交于
This patch introduce a CONFIG_XEN_PVHVM compile time option to enable/disable Xen PV on HVM support. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
- 29 7月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
In general the semantics of IPIs are that they are are expected to continue functioning after dpm_suspend_noirq(). Specifically I have seen a deadlock between the callfunc IPI and the stop machine used by xen's do_suspend() routine. If one CPU has already called dpm_suspend_noirq() then there is a window where it can be sent a callfunc IPI before all the other CPUs have entered stop_cpu(). If this happens then the first CPU ends up spinning in stop_cpu() waiting for the other to rendezvous in state STOPMACHINE_PREPARE while the other is spinning in csd_lock_wait(). Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 23 7月, 2010 3 次提交
-
-
由 Stefano Stabellini 提交于
Don't break the assumption that the first 16 irqs are ISA irqs; make sure that the irq is actually free before using it. Use dynamic_irq_init_keep_chip_data instead of dynamic_irq_init so that chip_data is not NULL (a NULL chip_data breaks setup_vector_irq). Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Stefano Stabellini 提交于
Add the xen pci platform device driver that is responsible for initializing the grant table and xenbus in PV on HVM mode. Few changes to xenbus and grant table are necessary to allow the delayed initialization in HVM mode. Grant table needs few additional modifications to work in HVM mode. The Xen PCI platform device raises an irq every time an event has been delivered to us. However these interrupts are only delivered to vcpu 0. The Xen PCI platform interrupt handler calls xen_hvm_evtchn_do_upcall that is a little wrapper around __xen_evtchn_do_upcall, the traditional Xen upcall handler, the very same used with traditional PV guests. When running on HVM the event channel upcall is never called while in progress because it is a normal Linux irq handler (and we cannot switch the irq chip wholesale to the Xen PV ones as we are running QEMU and might have passed in PCI devices), therefore we cannot be sure that evtchn_upcall_pending is 0 when returning. For this reason if evtchn_upcall_pending is set by Xen we need to loop again on the event channels set pending otherwise we might loose some event channel deliveries. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Sheng Yang 提交于
Set the callback to receive evtchns from Xen, using the callback vector delivery mechanism. The traditional way for receiving event channel notifications from Xen is via the interrupts from the platform PCI device. The callback vector is a newer alternative that allow us to receive notifications on any vcpu and doesn't need any PCI support: we allocate a vector exclusively to receive events, in the vector handler we don't need to interact with the vlapic, therefore we avoid a VMEXIT. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 19 2月, 2010 1 次提交
-
-
由 Eric W. Biederman 提交于
Right now xen's use of the x86 and ia64 handle_irq is just bizarre and very fragile as it is very non-obvious the function exists and is is used by code out in drivers/.... Luckily using handle_irq is completely unnecessary, and we can just use the generic irq apis instead. This still leaves drivers/xen/events.c as a problematic user of the generic irq apis it has "static struct irq_info irq_info[NR_IRQS]" but that can be fixed some other time. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> LKML-Reference: <4B7CAAD2.10803@kernel.org> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 04 12月, 2009 1 次提交
-
-
由 Ian Campbell 提交于
On resume irq_info[*].evtchn is reset to 0 since event channel mappings are not preserved over suspend/resume. The other contents of irq_info is preserved to allow rebind_evtchn_irq() to function. However when a device resumes it will try to unbind from the previous IRQ (e.g. blkfront goes blkfront_resume() -> blkif_free() -> unbind_from_irqhandler() -> unbind_from_irq()). This will fail due to the check for VALID_EVTCHN in unbind_from_irq() and the IRQ is leaked. The device will then continue to resume and allocate a new IRQ, eventually leading to find_unbound_irq() panic()ing. Fix this by changing unbind_from_irq() to handle teardown of interrupts which have type!=IRQT_UNBOUND but are not currently bound to a specific event channel. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
-
- 01 7月, 2009 1 次提交
-
-
由 Pekka Enberg 提交于
The init_IRQ() function is now called with slab allocator initialized. Therefore, we must not use the bootmem allocator in xen_init_IRQ(). Fixes the following boot-time warning: ------------[ cut here ]------------ WARNING: at mm/bootmem.c:535 alloc_arch_preferred_bootmem+0x27/0x45() Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.30 #1 Call Trace: [<ffffffff8102d6e3>] ? warn_slowpath_common+0x73/0xb0 [<ffffffff810210d9>] ? pvclock_clocksource_read+0x49/0x90 [<ffffffff812e522f>] ? alloc_arch_preferred_bootmem+0x27/0x45 [<ffffffff812e5761>] ? ___alloc_bootmem_nopanic+0x39/0xc9 [<ffffffff812e57fa>] ? ___alloc_bootmem+0x9/0x2f [<ffffffff812e9e21>] ? xen_init_IRQ+0x25/0x61 [<ffffffff812d69ee>] ? start_kernel+0x1b5/0x29e ---[ end trace 4eaa2a86a8e2da22 ]--- Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Tested-by: NChristian Kujau <lists@nerdbynature.de> Reported-by: NChristian Kujau <lists@nerdbynature.de> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: lists@nerdbynature.de Cc: jeremy.fitzhardinge@citrix.com LKML-Reference: <1246438278.22417.28.camel@penberg-laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 6月, 2009 2 次提交
-
-
由 Tejun Heo 提交于
Percpu variable definition is about to be updated such that all percpu symbols including the static ones must be unique. Update percpu variable definitions accordingly. * as,cfq: rename ioc_count uniquely * cpufreq: rename cpu_dbs_info uniquely * xen: move nesting_count out of xen_evtchn_do_upcall() and rename it * mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and rename it * ipv4,6: rename cookie_scratch uniquely * x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to pmc_irq_entry and nmi_entry to pmc_nmi_entry * perf_counter: rename disable_count to perf_disable_count * ftrace: rename test_event_disable to ftrace_test_event_disable * kmemleak: rename test_pointer to kmemleak_test_pointer * mce: rename next_interval to mce_next_interval [ Impact: percpu usage cleanups, no duplicate static percpu var names ] Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Dave Jones <davej@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: linux-mm <linux-mm@kvack.org> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andi Kleen <andi@firstfloor.org>
-
由 Tejun Heo 提交于
Currently, the following three different ways to define percpu arrays are in use. 1. DEFINE_PER_CPU(elem_type[array_len], array_name); 2. DEFINE_PER_CPU(elem_type, array_name[array_len]); 3. DEFINE_PER_CPU(elem_type, array_name)[array_len]; Unify to #1 which correctly separates the roles of the two parameters and thus allows more flexibility in the way percpu variables are defined. [ Impact: cleanup ] Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: linux-mm@kvack.org Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net>
-
- 28 4月, 2009 2 次提交
-
-
由 Yinghai Lu 提交于
This simplifies the node awareness of the code. All our allocators only deal with a NUMA node ID locality not with CPU ids anyway - so there's no need to maintain (and transform) a CPU id all across the IRq layer. v2: keep move_irq_desc related [ Impact: cleanup, prepare IRQ code to be NUMA-aware ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> LKML-Reference: <49F65536.2020300@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
according to Ingo, change set_affinity() in irq_chip should return int, because that way we can handle failure cases in a much cleaner way, in the genirq layer. v2: fix two typos [ Impact: extend API ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 31 3月, 2009 1 次提交
-
-
由 Ian Campbell 提交于
Given an evtchn, return the corresponding irq. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-