This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Similar to commit b6541db1 ("powerpc/eeh: Block PCI config access
upon frozen PE"), this blocks the PCI config space of Broadcom
Shiner adapter until PE reset is completed, to avoid recursive
fenced PHB when dumping PCI config registers during the period
of error recovery.

   ~# lspci -ns 0003:03:00.0
   0003:03:00.0 0200: 14e4:168a (rev 10)
   ~# lspci -s 0003:03:00.0
   0003:03:00.0 Ethernet controller: Broadcom Corporation \
                NetXtreme II BCM57800 1/10 Gigabit Ethernet (rev 10)
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This simplifies pnv_eeh_set_option() to avoid unnecessary nested
if statements, to improve readability. No functional changes.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the logic of pnv_eeh_cap_start() to pnv_eeh_find_cap()
as the function is only called by pnv_eeh_find_cap(). The logic
of both functions are pretty simple. No need to have separate
functions.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This applies cleanup on eeh-powernv.c, no functional changes:

   * Remove unnecessary comments and empty line.
   * Correct inaccurate comments.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This cleans up pseries_eeh_get_state(), no functional changes:

   * Return EEH_STATE_NOT_SUPPORT early when the 2nd RTAS output
     argument is zero to avoid nested if statements.
   * Skip clearing bits in the PE state represented by variable
     "result" to simplify the code.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When one or both of the below two flags are marked in the PE state, the
PE's IO path is regarded as enabled: EEH_STATE_MMIO_ACTIVE or
EEH_STATE_MMIO_ENABLED.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On fenced PHB, the error handlers in the drivers of its subordinate
devices could return PCI_ERS_RESULT_CAN_RECOVER, indicating no reset
will be issued during the recovery. It's conflicting with the fact
that fenced PHB won't be recovered without reset.

This limits the return value from the error handlers in the drivers
of the fenced PHB's subordinate devices to PCI_ERS_RESULT_NEED_NONE
or PCI_ERS_RESULT_NEED_RESET, to ensure reset will be issued during
recovery.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently, we rely on the existence of struct pci_driver::err_handler
to decide if the corresponding PCI device should be unplugged during
EEH recovery (partially hotplug case). However that check is not
sufficient. Some device drivers implement only some of the EEH error
handlers to collect diag-data. That means the driver still expects a
hotplug to recover from the EEH error.

This makes the hotplug criterion more relaxed: if the device driver
doesn't provide all necessary EEH error handlers, it will experience
hotplug during EEH recovery.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
[mpe: Minor change log rewording]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On PowerNV platform, the PE is kept in frozen state until the PE
reset is completed to avoid recursive EEH error caused by MMIO
access during the period of EEH reset. The PE's frozen state is
cleared after BARs of PCI device included in the PE are restored
and enabled. However, we needn't clear the frozen state for PHB PE
explicitly at this point as there is no real PE for PHB PE. As the
PHB PE is always binding with PE#0, we actually clear PE#0, which
is wrong. It doesn't incur any problem though.

This checks if the PE is PHB PE and doesn't clear the frozen state
if it is.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add a boot wrapper script function run_cmd which will run a shell command
quietly and only print the output if either V=1 or an error occurs.

Also, run the ps3 dd commands with run_cmd to clean up the build output.
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

of_get_property() is used inside the loop, but then the reference to the
node is dropped before dereferencing the prop pointer, which could by then
point to junk if the node has been freed.

Instead use of_property_read_u32() to actually read the property
value before dropping the reference.

of_property_read_u32() requires at least one cell (u32) to be present,
which is stricter than the old logic which would happily dereference a
property of any size. However we believe all device trees in the wild
have at least one cell.

Skiboot may produce memory nodes with more than one cell, but that is
OK, of_property_read_u32() will return the first one.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
[mpe: Expand change log with device tree details]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The TUNE_CELL option allows you to build a kernel that runs on multiple
CPUs but is tuned (ie. optimised) to run on Cell CPUs. Now days no one
is building a distro in that fashion, and any users who are building
custom kernels for their Cell machines are better off building with
CONFIG_CELL_CPU, which builds a kernel that only runs on Cell and
therefore can be optimised even more aggresively.

Dropping the option also avoids confusing other users, who are presented
with an option to tune for Cell when they are not building for a Cell
CPU at all.
Suggested-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

EBB (Event Based Branches) are currently only available on POWER8, so we
should skip them on other CPUs.

I've found that at least one test loops forever on 970MP (cycles_with_freeze_test).
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org>
[mpe: Minor change log editing, add skip to cpu_event_vs_ebb_test]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When building against older kernel headers, currently the tm-syscall
test fails to build because PPC_FEATURE2_HTM_NOSC is not defined.

Tweak the test so that if PPC_FEATURE2_HTM_NOSC is not defined it still
builds, but prints a warning at run time and marks the test as skipped.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This list has gotten too long. Split it into individual lines and sort
them, so in future we can add new entries more cleanly.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is just a simple test which confirms that the individual IPC
syscalls are all available.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch adds a set of new elements to the existing PACA dump list
inside an xmon session which can be listed below improving the overall
xmon debug support.

With this patch, a typical xmon PACA dump looks something like this.

paca for cpu 0x0 @ c00000000fdc0000:
 possible             = yes
 present              = yes
 online               = yes
 lock_token           = 0x8000            	(0xa)
 paca_index           = 0x0               	(0x8)
 kernel_toc           = 0xc000000001393200	(0x10)
 kernelbase           = 0xc000000000000000	(0x18)
 kernel_msr           = 0xb000000000001033	(0x20)
 emergency_sp         = 0xc00000003fff0000	(0x28)
 mc_emergency_sp      = 0xc00000003ffec000	(0x2e0)
 in_mce               = 0x0               	(0x2e8)
 hmi_event_available  = 0x0               	(0x2ea)
 data_offset          = 0x1fe7b0000       	(0x30)
 hw_cpu_id            = 0x0               	(0x38)
 cpu_start            = 0x1               	(0x3a)
 kexec_state          = 0x0               	(0x3b)
 slb_shadow[0]:       = 0xc000000008000000 0x40016e7779000510
 slb_shadow[1]:       = 0xd000000008000001 0x400142add1000510
 vmalloc_sllp         = 0x510             	(0x1b8)
 slb_cache_ptr        = 0x4               	(0x1ba)
 slb_cache[0]:        = 0x000000000003f000
 slb_cache[1]:        = 0x0000000000000001
 slb_cache[2]:        = 0x0000000000000003
 slb_cache[3]:        = 0x0000000000001000
 slb_cache[4]:        = 0x0000000000001000
 slb_cache[5]:        = 0x0000000000000000
 slb_cache[6]:        = 0x0000000000000000
 slb_cache[7]:        = 0x0000000000000000
 dscr_default         = 0x0               	(0x58)
 __current            = 0xc000000001331e80	(0x290)
 kstack               = 0xc000000001393e30	(0x298)
 stab_rr              = 0x11              	(0x2a0)
 saved_r1             = 0xc0000001fffef5e0	(0x2a8)
 trap_save            = 0x0               	(0x2b8)
 soft_enabled         = 0x0               	(0x2ba)
 irq_happened         = 0x1               	(0x2bb)
 io_sync              = 0x0               	(0x2bc)
 irq_work_pending     = 0x0               	(0x2bd)
 nap_state_lost       = 0x0               	(0x2be)
 sprg_vdso            = 0x0               	(0x2c0)
 tm_scratch           = 0x8000000100009033	(0x2c8)
 core_idle_state_ptr  = (null)            	(0x2d0)
 thread_idle_state    = 0x0               	(0x2d8)
 thread_mask          = 0x0               	(0x2d9)
 subcore_sibling_mask = 0x0               	(0x2da)
 user_time            = 0x0               	(0x2f0)
 system_time          = 0x0               	(0x2f8)
 user_time_scaled     = 0x0               	(0x300)
 starttime            = 0x3f462418b5cf4   	(0x308)
 starttime_user       = 0x3f4622a57092a   	(0x310)
 startspurr           = 0xd62a5718        	(0x318)
 utime_sspurr         = 0x0               	(0x320)
 stolen_time          = 0x0               	(0x328)
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Endian swap slb_shadow before display, minor formatting]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The kernel log buffer is often much longer than the size of a terminal
so paginate it's output.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The paca display is already more than 24 lines, which can be problematic
if you have an old school 80x24 terminal, or more likely you are on a
virtual terminal which does not scroll for whatever reason.

This patch adds a new command "#", which takes a single (hex) numeric
argument: lines per page. It will cause the output of "dp" and "dpa"
to be broken into pages, if necessary.

Sample output:

0:mon> # 10
0:mon> dp1
paca for cpu 0x1 @ c00000000fdc0480:
 possible         = yes
 present          = yes
 online           = yes
 lock_token       = 0x8000            	(0x8)
 paca_index       = 0x1               	(0xa)
 kernel_toc       = 0xc000000000eb2400	(0x10)
 kernelbase       = 0xc000000000000000	(0x18)
 kernel_msr       = 0xb000000000001032	(0x20)
 emergency_sp     = 0xc00000003ffe8000	(0x28)
 mc_emergency_sp  = 0xc00000003ffe4000	(0x2e0)
 in_mce           = 0x0               	(0x2e8)
 data_offset      = 0x7f170000        	(0x30)
 hw_cpu_id        = 0x8               	(0x38)
 cpu_start        = 0x1               	(0x3a)
 kexec_state      = 0x0               	(0x3b)
[Hit a key (a:all, q:truncate, any:next page)]
0:mon>
 __current        = 0xc00000007e696620	(0x290)
 kstack           = 0xc00000007e6ebe30	(0x298)
 stab_rr          = 0xb               	(0x2a0)
 saved_r1         = 0xc00000007ef37860	(0x2a8)
 trap_save        = 0x0               	(0x2b8)
 soft_enabled     = 0x0               	(0x2ba)
 irq_happened     = 0x1               	(0x2bb)
 io_sync          = 0x0               	(0x2bc)
 irq_work_pending = 0x0               	(0x2bd)
 nap_state_lost   = 0x0               	(0x2be)
0:mon>
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
[mpe: Use bool, make some variables static]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

of_get_next_parent can be used to simplify the while() loop and
avoid the need of a temp variable.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

of_get_next_parent can be used to simplify the while() loop and
avoid the need of a temp variable.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 3c8464a9 ("powerpc:
Delete old PrPMC 280/2800 support") we got rid of most of the C
code, and the Makefile/Kconfig hooks, but it seems I left the
platform's DTS file orphaned in the tree as well as the boot code.
Here we get rid of them both.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

CONFIG_INPUT_KEYBDEV does not exist and no additional keyboard-specific
options are needed to get the keyboard working.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

.exit.text is discarded at run time and there are some references from
that to .exit.data, so we need to discard .exit.data at run time as well.

Fixes these errors:

`.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o
`.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

No need to have two atomic opertions (update and fetch/check) when
decreasing PE's number of passed devices as one atomic operation
is enough.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When adding a vPHB in cxl_pci_vphb_add(), we allocate a pci_controller
struct using pcibios_alloc_controller(). However, we don't free it in
cxl_pci_vphb_remove(), causing a leak.

Call pcibios_free_controller() in cxl_pci_vphb_remove() to free the vPHB
data structure correctly.
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Export pcibios_free_controller(), so it can be used by the cxl module to
free virtual PHBs.
Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch provides individual system call numbers for the following
System V IPC system calls, on PowerPC, so that they do not need to be
multiplexed:
* semop, semget, semctl, semtimedop
* msgsnd, msgrcv, msgget, msgctl
* shmat, shmdt, shmget, shmctl
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that pseries selects PCI_MSI && PCI, EEH will always be true, and
therefore CONFIG_PSERIES_MSI will always be true. So drop it, and move
msi.o to obj-y.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Make it entirely clear in the Makefile that we always build the pci
related files by moving them to obj-y.

Note that CONFIG_EEH is now always enabled on pseries, because it
depends on PSERIES && PCI.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that we always have CONFIG_PCI=y for pseries, we can stop guarding
code with CONFIG_PCI ifdefs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The pseries build with PCI=n looks to have been broken for at least 5
years, and no one's noticed or cared.

Following the obvious breakages backward, the first commit I can find
that builds is the parent of 2eb4afb6 ("powerpc/pci: Move pseries
code into pseries platform specific area") from April 2009.

A distro would never ship a PCI=n kernel, so it is only useful for folks
building custom kernels. Also on KVM the virtio devices appear on PCI,
so it would only be useful if you were building kernels specifically to
run on PowerVM and with no PCI devices.

The added code complexity, and testing load (which we've clearly not
been doing), is not justified by the small reduction in kernel size for
such a niche use case.

So just make PCI non-optional on pseries.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

My recent commit d2036f30 ("scripts/kconfig/Makefile: Allow
KBUILD_DEFCONFIG to be a target"), contained a bug in that when it
checks if KBUILD_DEFCONFIG is a file it forgets to prepend $(srctree) to
the path.

This causes the build to fail when building out of tree (with O=), and
when the value of KBUILD_DEFCONFIG is 'defconfig'. In that case we will
fail to find the 'defconfig' file, because we look in the build
directory not $(srctree), and so we will call Make again with
'defconfig' as the target. From there we loop infinitely calling 'make
defconfig' again and again.

The fix is simple, we need to look for the file under $(srctree).

Fixes: d2036f30 ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Reported-by: NOlof Johansson <olof@lixom.net>
Acked-by: NMichal Marek <mmarek@suse.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We need to properly identify whether a hugepage is an explicit or
a transparent hugepage in follow_huge_addr(). We used to depend
on hugepage shift argument to do that. But in some case that can
result in wrong results. For ex:

On finding a transparent hugepage we set hugepage shift to PMD_SHIFT.
But we can end up clearing the thp pte, via pmdp_huge_get_and_clear.
We do prevent reusing the pfn page via the usage of
kick_all_cpus_sync(). But that happens after we updated the pte to 0.
Hence in follow_huge_addr() we can find hugepage shift set, but transparent
huge page check fail for a thp pte.

NOTE: We fixed a variant of this race against thp split in commit
691e95fd
("powerpc/mm/thp: Make page table walk safe against thp split/collapse")

Without this patch, we may hit the BUG_ON(flags & FOLL_GET) in
follow_page_mask occasionally.

In the long term, we may want to switch ppc64 64k page size config to
enable CONFIG_ARCH_WANT_GENERAL_HUGETLB
Reported-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

After commit e2b3d202
("powerpc: Switch 16GB and 16MB explicit hugepages to a
different page table format"), we don't need to support
is_hugepd() for 64K page size.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

pi_buff is being memset before it is sanity checked. Move the
memset after the null pi_buff sanity check to avoid an oops.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This avoid errors like

        unsigned int usize = 1 << 30;
        int size = 1 << 30;
        unsigned long addr = 64UL << 30 ;

        value = _ALIGN_DOWN(addr, usize); -> 0
        value = _ALIGN_DOWN(addr, size);  -> 0x1000000000
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Always include a timeout when waiting for secondary cpus to enter OPAL
in the kexec path, rather than only when crashing.
Signed-off-by: NSamuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

show_interrupts() expects the irq_chip name to be max 8 characters
otherwise everything get misaligned

# cat /proc/interrupts
           CPU0
 17:          0   CPM PIC   0 Level     error
 19:          0  MPC8XX SIU  15 Level     tbint
 20:         90   CPM PIC   4 Level     cpm_uart
 38:      29746  MPC8XX SIU   5 Level     fs_enet-mac
 39:          0  MPC8XX SIU   7 Level     fs_enet-mac
 47:        401   CPM PIC   5 Level     fsl_spi
 68:          1  MPC8XX SIU   2 Level     phy_interrupt, phy_interrupt, phy_interrupt
LOC:    7225485   Local timer interrupts for timer event device
LOC:          9   Local timer interrupts for others
SPU:          0   Spurious interrupts
PMI:          0   Performance monitoring interrupts
MCE:          0   Machine check exceptions
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>