Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Acked-by: NLuis R. Rodriguez <mcgrof@qca.qualcomm.com>
Cc: linux-mips@linux-mips.org
Cc: mcgrof@infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/3516/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add copyright records according to the recent changes in
the PCI code. Also fix up the descriptions.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Signed-off-by: NImre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3503/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The variables set by this function are not used anymore.
Remove the function and the relevant variables as well.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3501/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The PCI controllers in the AR71XX and in the
AR724X SoCs are different, and both of them
uses different IRQ wiring.

The patch modifies the 'pcibios_map_irq' function
in order to allow to use different IRQ maps for
the different SoCs. The patch also adds a function,
which lets the board setup code to override the
default IRQ map.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3500/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Th current implementation causes NULL pointer dereference
if 'pci_data' is not set:

pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI
address [0x10000000-0x1000ffff])
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4
Oops[#1]:
Cpu 0
$ 0   : 00000000 80420000 00000000 00000000
$ 4   : 00000000 00000000 00000001 00000001
$ 8   : 00000001 0000032c 81c54700 00000001
$12   : 0000032d 0000000f 00000000 ffffffff
$16   : 81c14c00 00000001 802dac74 80195f98
$20   : 802ea050 00000000 00000000 00000000
$24   : 00000003 800617f0
$28   : 81c20000 81c21e70 00000000 802e78a4
Hi    : 00000000
Lo    : 4190ab00
epc   : 802daca0 0x802daca0
    Not tainted
ra    : 802e78a4 0x802e78a4
Status: 1000c003    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019374 (MIPS 24Kc)
Modules linked in:
Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000
        802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290
        80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000
        00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000
        00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000

This can be avoided by calling the 'ar724x_pci_add_data'
function from the board specific setup code. However it
makes no sense to use that function for every board,
especially when the board does not needs to set the
platform_data field of any PCI device.

The patch allows the board setup code to specify a board
specific function if that is required.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3499/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The PCI Host Controller of the AR724x SoC has a
built-in IRQ controller. The current code does
not supports that, so the IRQ lines wired to this
controller are not usable. This leads to failed
'request_irq' calls:

  ath9k 0000:00:00.0: request_irq failed
  ath9k: probe of 0000:00:00.0 failed with error -89

This patch adds support for the IRQ controller
in order to make PCI IRQs work.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc:  linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3496/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Replace the 'ath724x' to 'ar724x' in function, variable and
structure names to reflect the name of the real SoC.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Acked-by: NRené Bolldorf <xsecute@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3490/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The current code unconditionally registers the AR724X
specific PCI controller, even if the kernel is running
on a different SoC.

Add a common function for PCI controller registration,
and only register the AR724X PCI controller if the kernel
is running on an AR724X SoC.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3488/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The declared function in this header file is used by the
ath79 platform code only. Move the header to the platform
directory.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Acked-by: NRené Bolldorf <xsecute@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3486/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The 'pcibios_map_irq' and 'pcibios_plat_dev_init'
are common functions and only instance one of them
can be present in a single kernel.

Currently these functions can be built only if the
CONFIG_SOC_AR724X option is selected. However the
ath79 platform contain support for the AR71XX SoCs,.
The AR71XX SoCs have a differnet PCI controller,
and those will require a different code.

Move the common PCI code into a separeate file in
order to be able to use that with other SoCs as
well.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Acked-by: NRené Bolldorf <xsecute@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3485/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>