- 22 1月, 2013 35 次提交
-
-
由 Amos Kong 提交于
Currently we write MAC address to pci config space byte by byte, this means that we have an intermediate step where mac is wrong. This patch introduced a new control command to set MAC address, it's atomic. VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility. Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
When we set mac address, software mac address in system and hardware mac address all need to be updated. Current eth_mac_addr() doesn't allow callers to implement error handling nicely. This patch split eth_mac_addr() to prepare part and real commit part, then we can prepare first, and try to change hardware address, then do the real commit if hardware address is set successfully. Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amos Kong 提交于
We want to send vq command to set mac address in virtnet_set_mac_address(), so do this function moving. Fixed a little issue of coding style. Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Nicolas Dichtel says: ==================== The goal of this serie is to add the support of proxy multicast, ie being able to build a static multicast tree. In other words, it adds the support of (*,G) mf[6]c entries. v2: use INADDR_ANY instead of 0 for IPv4 addresses ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This patch add the support of proxy multicast, ie being able to build a static multicast tree. It adds the support of (*,*) and (*,G) entries. The user should define an (*,*) entry which is not used for real forwarding. This entry defines the upstream in iif and contains all interfaces from the static tree in its oifs. It will be used to forward packet upstream when they come from an interface belonging to the static tree. Hence, the user should define (*,G) entries to build its static tree. Note that upstream interface must be part of oifs: packets are sent to all oifs interfaces except the input interface. This ensures to always join the whole static tree, even if the packet is not coming from the upstream interface. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This will ease further addition of new MRT[6]_* values and avoid to update in6.h each time. Note that we reduce the maximum value from 210 to 209, but 210 does not match any known value in ip[6]_mroute_setsockopt(). Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
The original intent of this file was to list limitations in drivers/hardware relating to multicast use, back when some modest hardware from the early 1990s did not support things we might take for granted today. I was intending to delete some now-gone MCA/token ring entries in this file, but once I opened it, I found it only contained information on the earliest (pre-2000) linux networking drivers. Checking the git history shows that the file hasn't been touched since 2005. Clearly nobody is actively consulting this file as a meaningful reference. Rather than add a "YES YES YES" line for all of the drivers we currently have, lets just take advantage of the fact that nobody is using the file to delete it. This has the side benefit of not having to do a line-by-line deletion of the file content as each older driver is expired. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge s390 networking changes from Frank Blaschka. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
Commit 46d3ceab "tcp: TCP Small Queues" has severly degraded performance for single connection RR workloads on HiperSockets with MTU >=16K due to a conflict of the TCP Small Queues approach with our buffer scan threshold which releases buffers not frequently enough yet. This fix restores performance to the same level as before cited commit. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
As of now, s390dbf entries for the cards are discarded as soon as the device is removed. However, this will also bar us of all chances of getting valuable debug information after a device has been removed. This patch will keep the s390dbf entries around until the qeth module is removed. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
Refer to virtual NICs instead of GuestLANs. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
The existing port isolation mode 'forward' will now verify that the adjacent switch port supports the required reflective relay (RR) mode. This patch adds the required error handling for the cases where enabling port isolation mode 'forward' can now fail. Furthermore, once established, we never fall back from one of the port isolation modes to a non-isolated mode without further user-interaction. This includes cases where the isolation mode was enabled successfully, but ceases to work e.g. due to configuration changes at the switch port. Finally, configuring an isolation mode with the device being offline will make onlining the device fail permanently upon errors encountered until either errors are resolved or the isolation mode is changed by the user to a different mode. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
Remove exports that are not used anywhere else. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
The previous code did never retry any idx setup unless retries were done for device offline/online at the beginning of the function. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
YOSHIFUJI Hideaki says: ==================== This series of changes basically clean up NDISC logic, especially on sender side. We originally do For NS/NA/RS: 1) build temporary ICMPv6 header 2) ndisc_build_skb() with temporary ICMPv6 header and rather criptic arguments. - Calculate total length and allocate sk_buff - Build IPv6 header. - copy ICMPv6 header, additional data and ND options. - Fill-in ICMPv6 checksum. Here, structures defined for message format was not used at all, it is difficult to understand what is being sent, and it was not generic. 3) __ndisc_send() - Allocate temporary dst. - Send it. Several issues: - We could not defer decision if we should/can send some ND option. - It is hard to see the packet format at a glance. - ICMPv6 header was built as temporary variable, and then copied to the buffer. - Some code path for Redirect was not shared. With these patches, we do: 1) Calculate (or estimate) message length and option length. 2) Allocate skb (via new ndisc_skb_alloc()). 3) Fill-in ICMPv6 message directly using compound literals. 4) Fill-in ICMPv6 checksum 5) Build IPv6 header (including length) 6) Send the packet (via ndisc_send_skb()). - allocate temporary dst and send it. - We can defer calculating real length of the packet. For example, we can give up filling some option at when filling in. - Message is built directly without temporary buffer. - Structures defined for message format is easier to understand what is being built. - NS/NA/RS/Redirect share same logic. - Reduced code/data size: text data bss dec hex filename 265407 14133 3488 283028 45194 old/net/ipv6/ipv6.o 264955 14109 3488 282552 44fb8 new/net/ipv6/ipv6.o ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Construct NS/NA/RS message directly using C99 compound literals. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Reuse dst if one is attached with skb. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
skb_transport_header() (thus icmp6_hdr()) is available here, use it. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Build ICMPv6 message first and make buffer management easier; we can use skb->len when filling checksum in ICMPv6 header, and then build IP header with length field. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Since we have skb->dev, use it. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
- move ip6_nd_hdr() to its users' source files. In net/ipv6/mcast.c, it will be called ip6_mc_hdr(). - make return type to void since this function never fails. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Suggested by Eric Dumazet <edumazet@google.com>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
This also makes ndisc_opt_addr_data() and ndisc_fill_addr_option() use ndisc_opt_addr_space(). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Add pointer to struct net_device (dev) and remove data_len (= dev->addr_len) and addr_type (= dev->type). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thierry Reding 提交于
The correct name of the transmit DMA channel field in struct emac_priv is txchan, not txch. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2013 5 次提交
-
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
It is wrong to set skb->ip_summed to CHECKSUM_UNNECESSARY unless the device has already checked it. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
This patch calls device_set_wakeup_enable() inside set_wol callback, so that turning on WOL from user mode utility can make the 'wakeup' of pegasus device to be enabled, then remote wakeup may be enabled before putting into sleep. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
remove redundant code from build_inline_wqe() Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-By: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-