Trivial patch: now the hid-wacom driver supports also Intuos4 WL tablet.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This option was ment as a safety mechanism in case the system treats the wacom
tablet battery as the main power supply. It's no longer required as now we can
distinguish between system power supply and device power supply.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for BT-driven configuration of the TiVo remote.
Reported-by: NJoshua Dillon <jvdillon@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X.
Update Kconfig entry accordingly, remove EXPERT dependency.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The driver currently only supports the PS1000 controller.
It fixes the report descriptor by removing a non-existing axis and
clearing the constant bit on the d-pad and button input reports.
Signed-off-by: NAndreas Hübner <andreas@k4n.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Before commit 534a7b8e ("HID: Add full support for Logitech Unifying
receivers") Logitech Unifying receiver can work as generic device
without special driver, after that commit these devices does not works
without special driver.

After this patch they will use generic driver if special driver is disabled.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

While at it, also fix some minor codingstyle issues.
Signed-off-by: NDenis Kovalev <Denis.Kovalev@dataart.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix mismatch between Kconfig name and Makefile expectation.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.

What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).

lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)

Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Perixx Peripad 701 is an hybrid device which presents a touchpad and
a keyboard on the same surface. The switch between the two is controlled
by a physical switch, and the firmware sends the events on the right
interface (mouse, keyboard or multitouch).
This patch enables the multitouch interface of this device to work.

We need to manually set the device as a trackpad (we cannot infer it
from the reports descriptors as the device works under Windows, a system
that does not allow multitouch touchpad).
We also need to set the hid feature MAX CONTACT NUMBER to 2 or the device
stops sending events once it has been pressed by two touches.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

To cleanup Kconfig space and ease selection for users there is now
a single entry that selects all roccat related drivers at once.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.).
Signed-off-by: NMasatoshi Hoshikawa <hoshikawa@xiroku.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Replace mistakenly used '==' by '='.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

ppc6xx_defconfig reveals this:

drivers/built-in.o: In function `hidinput_cleanup_battery': drivers/hid/hid-input.c:351: undefined reference to`power_supply_unregister'
drivers/built-in.o: In function `hidinput_setup_battery': drivers/hid/hid-input.c:338: undefined reference to `power_supply_register'
make[1]: *** [.tmp_vmlinux1] Error 1

The defconfig in question doens't mention either option and kbuild is
genertaing

	CONFIG_HID_BATTERY_STRENGTH=y
	CONFIG_POWER_SUPPLY=m

which is wrong. Put a proper dependency in place.
Reported-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]
Signed-off-by: NAaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We depend on memless force-feedback support, therefore correctly select the
related config options.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for Roccat Isku keyboard.
Userland tools can be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch merge the last old-style hid multitouch driver to
the generic one.
It also adds 2 more quanta pids.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some HID devices, such as my Bluetooth mouse, report their battery
strength as an event.  Rather than passing it through as a strange
absolute input event, this patch registers it with the power_supply
subsystem as a battery, so that the device's Battery Strength can be
reported to usermode.

The battery appears in sysfs names
/sys/class/power_supply/hid-<UNIQ>-battery, and it is a child of the
battery-containing device, so it should be clear what it's the battery of.

Unfortunately on my current Fedora 16 system, while the battery does
appear in the UI, it is listed as a Laptop Battery with 0% charge (since
it ignores the "capacity" property of the battery and instead computes
it from the "energy*" fields, which we can't supply given the limited
information contained within the HID Report).

Still, this patch is the first step.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The wiimote supports several extensions. This adds a separate source file which
handles all extensions and can be disabled at compile-time.

The driver reacts on "plug"-events on the extension port and starts a worker
which initializes or deinitializes the extensions.

Currently, the initialization logic is not fully understood and we can only
detect and enable all extensions when all extensions are deactivated. Therefore,
we need to disable all extensions, then detect and activate them again to react
on "plug"-events.
However, deactivating extensions will generate a new "plug"-event and we will
never leave that loop. Hence, we only support extensions if they are plugged
before the wiimote is connected (or before the ext-input device is opened). In
the future we may support full extension hotplug support, but
reverse-engineering this may take a while.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Rename the Kconfig entry for hyperv mouse driver so that it has
HID_ prefix as all the other drivers; while at it, place the entry
for this driver to properly ordered place in Makefile and Kconfig.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The file  hid-hyperv.c implements a hid compliant mouse driver for use on a
Hyper-V based system. This driver is currently in the staging area and as part
of the effort to move this driver out of staging, I had posted the driver code
for community review a few weeks ago. This current patch addresses all the
review comments I have gotten to date. All the relevant patches have already
been submitted to the staging tree as well.

As per Greg's suggestion, this patch does not get rid of the code from
the staging area. Once the mouse driver lands under the hid directory,
we will cleanup the staging directory.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Support the following models: Super Joy Box 3 Pro, Super Dual Box Pro
and Super Joy Box 5 Pro. These models have support for pressure
sensitive buttons and they can force the controller to either digital
or analog mode, both of which are not supported yet.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Remove Kconfig dependency for hid-primax driver on CONFIG_EXPERT.
Please see changelog of 73d5e8f7 ("HID: fix up 'EMBEDDED' mess in
Kconfig") for reasoning behind this.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Primax keyboards with the issue this driver addresses report modifier
keys as in band key events instead of as out of band modifier bits,
resulting in the modifier keys generating key up events immediately
before the keys they are intended to modify.  This driver rewrites
the raw report data from such keyboards into USB HID 1.11 compliant
report data.  It only matches the USB vendor and product IDs for the
keyboard it has been tested on. Since there are several keyboards,
notably a number of laptops and folding USB keyboards known to have
similar unresolved problem reports, the list is expected to grow.
Signed-off-by: NTerry Lambert <tlambert@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

With this driver, all the devices paired to a single Unifying
receiver are exposed to user processes in separated /input/dev
nodes.

Keyboards with different layouts can be treated differently,
Multiplayer games on single PC (like home theater PC) can
differentiate input coming from different kbds paired to the
same receiver.

Up to now, when Logitech Unifying receivers are connected to a
Linux based system, a single keyboard and a single mouse are
presented to the HID Layer, even if the Unifying receiver can
pair up to six compatible devices. The Unifying receiver by default
multiplexes all incoming events (from multiple keyboards/mice)
into these two.
Signed-off-by: NNestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This registers a power_supply device for every remote to retrieve the current
battery charge level. Since this information is not sent by the wiimote
continously, we need to explicitely request it.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This panel is also known as the Dell ST2220Tc.

Signed-off-by: jeffbrown@android.com
Reviewed-By: NBenjamin Tissoires <Benjamin_Tissoires@logitech.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Do this for backwards compatibility reasons (LOGIWHEELS_FF has
been split-off from LOGITECH_FF), so that users don't have
regressions with 'default' kernel configs.

Reported-and-tested-by: simon@mungewell.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The description of lg4ff driver has to be changed to reflect the fact that the
driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been
renamed to LOGIWHEELS_FF
Signed-off-by: NMichal Malý <madcatxster@gmail.com>
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The config option needs to be a 'bool' and not a tristate, otheriwse
force feedback support never makes it into the module.
Signed-off-by: NSergei Kolzun <x0r@dv-life.ru>
Cc: stable@kernel.org
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for the CSR panel built by XAT.
Signed-off-by: NIce Chien <ice.chien@accupoint.com.tw>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add stub driver for the Nintendo Wii Remote. The wii remote uses
the HID protocol to communicate with the host over bluetooth. Hence,
add dependency for HIDP and place driver in hid subsystem.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add force feedback support for Holtek On Line Grip based HID devices.

The protocol is more complex than that of most other rumblepads, but the
device still needs to be handled as a memoryless one.

Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super
Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>.
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Tested-by: NCleber de Mattos Casali <clebercasali@yahoo.com.br>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

As module roccat is needed by all devices, it's the toplevel
menu entry with all devices dependent.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
place to another every now and then. The issue are relative motion events
erroneously reported by the device, each having a distance value of +256. This
256 can in fact never occur due to real motion, therefore those events can
safely be ignored.  The driver also drops useless EV_REL events with a value of
0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.
Signed-off-by: NStefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added Chunghwa hid multitouch panel support into hid-multitouch.
Signed-off-by: NAustin Zhang <zhang.austin@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch sorts the defs for the MT_CLS. I choose to split
generic classes and device specific ones to be able to add
more generic classes in the future.

It also put eGalax devices at their right place (alphabetically)
in mt_devices.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>