not used in the instances anymore.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Duplicate the flags argument into mask bitmap.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helpers: atomic_inc_unless_negative()/atomic_dec_unless_positive()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and convert the comment before it into linuxdoc form.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

convert the last remaining caller to inode_permission()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helper: would_dump(bprm, file).  Checks if we are allowed to
read the file and if we are not - sets ENFORCE_NODUMP.  Exported,
used in places that previously open-coded the same logics.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

capability overrides apply only to the default case; if fs has ->permission()
that does _not_ call generic_permission(), we have no business doing them.
Moreover, if it has ->permission() that does call generic_permission(), we
have no need to recheck capabilities.

Besides, the capability overrides should apply only if we got EACCES from
acl_permission_check(); any other value (-EIO, etc.) should be returned
to caller, capabilities or not capabilities.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Call the given function for all superblocks of given type.  Function
gets a superblock (with s_umount locked shared) and (void *) argument
supplied by caller of iterator.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Btrfs (and I'd venture most other fs's) stores its indexes in nice disk order
for readdir, but unfortunately in the case of anything that stats the files in
order that readdir spits back (like oh say ls) that means we still have to do
the normal lookup of the file, which means looking up our other index and then
looking up the inode.  What I want is a way to create dummy dentries when we
find them in readdir so that when ls or anything else subsequently does a
stat(), we already have the location information in the dentry and can go
straight to the inode itself.  The lookup stuff just assumes that if it finds a
dentry it is done, it doesn't perform a lookup.  So add a DCACHE_NEED_LOOKUP
flag so that the lookup code knows it still needs to run i_op->lookup() on the
parent to get the inode for the dentry.  I have tested this with btrfs and I
went from something that looks like this

http://people.redhat.com/jwhiter/ls-noreada.png

To this

http://people.redhat.com/jwhiter/ls-good.png

Thats a savings of 1300 seconds, or 22 minutes.  That is a significant savings.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Assume that /sys/kernel/debug/dummy64 is debugfs file created by
debugfs_create_x64().

	# cd /sys/kernel/debug
	# echo 0x1234567812345678 > dummy64
	# cat dummy64
	0x0000000012345678

	# echo 0x80000000 > dummy64
	# cat dummy64
	0xffffffff80000000

A value larger than INT_MAX cannot be written to the debugfs file created
by debugfs_create_u64 or debugfs_create_x64 on 32bit machine.  Because
simple_attr_write() uses simple_strtol() for the conversion.

To fix this, use simple_strtoll() instead.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't update *inode in __follow_mount_rcu() until we'd verified that
there is mountpoint there.  Kudos to Hugh Dickins for catching that
one in the first place and eventually figuring out the solution (and
catching a braino in the earlier version of patch).
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add missing ->i_mutex, convert to lookup_one_len() instead of
(broken) open-coded analog, cope with getting something like
a//b as relative pathname.  Simplify the hell out of it, while
we are there...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

... and it's getting it wrong, too - missing ->d_revalidate() calls when
it's dealing with filesystem (procfs) that has non-trivial ->d_revalidate()...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and we want to report these failures in ->lookup() anyway.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

it's NFS-exportable, so...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

NULL is not a possible return value for that method, TYVM...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... unfortunately, cifs bug got copied.  Fix is essentially the same.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

deal with d_move() races properly; rename_lock read-retry loop,
rcu_read_lock() held while walking to root, d_lock held over
subtraction from namelen and copying the component to stabilize
->d_name.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Both __d_unalias() and __d_materialise_dentry() need loop prevention.
Grab rename_lock in caller, check for loops there...

As a side benefit, we have dentry_lock_for_move() called only under
rename_lock, which seriously reduces deadlock potential of the
execrable "locking order" used for ->d_lock.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch contains a few misc fixes which resolve a recently
reported issue. This patch has been a real team effort and has
received a lot of testing.

The first issue is that the ail lock needs to be held over a few
more operations. The lock thats added into gfs2_releasepage() may
possibly be a candidate for replacing with RCU at some future
point, but at this stage we've gone for the obvious fix.

The second issue is that gfs2_write_inode() can end up calling
a glock recursively when called from gfs2_evict_inode() via the
syncing code, so it needs a guard added.

The third issue is that we either need to not truncate the metadata
pages of inodes which have zero link count, but which we cannot
deallocate due to them still being in use by other nodes, or we need
to ensure that those pages have all made it through the journal and
ail lists first. This patch takes the former approach, but the
latter has also been tested and there is nothing to choose between
them performance-wise. So again, we could revise that decision
in the future.

Also, the inode eviction process is now better documented.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Tested-by: NBob Peterson <rpeterso@redhat.com>
Tested-by: NAbhijith Das <adas@redhat.com>
Reported-by: NBarry J. Marson <bmarson@redhat.com>
Reported-by: NDavid Teigland <teigland@redhat.com>

Make sure that child is still a child of parent before nested locking
of child->d_lock in unlazy_walk(); otherwise we are risking a violation
of locking order and deadlocks.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

In 34c87901 "Shrink stack space usage in cifs_construct_tcon" we
change the size of the username name buffer from MAX_USERNAME_SIZE
(256) to 28.  This call to snprintf() needs to be updated as well.
Reported by Dan Carpenter.
Reviewed-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

When using NTLMSSP authentication mechanism, if server mandates
signing, keep the flags in type 3 messages of the NTLMSSP exchange
same as in type 1 messages (i.e. keep the indicated capabilities same).

Some of the servers such as Samba, expect the flags such as
Negotiate_Key_Exchange in type 3 message of NTLMSSP exchange as well.
Some servers like Windows do not.

https://bugzilla.samba.org/show_bug.cgi?id=8212Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

There is a potential race during filesystem mounting which has recently
been reported. It occurs when the userland gfs_controld is able to
process requests fast enough that it tries to use the sysfs interface
before the lock module is properly initialised. This is a pretty
unusual case as normally the lock module initialisation is very quick
compared with gfs_controld.

This patch adds an interruptible completion which is used to ensure that
userland will wait for the initialisation of the lock module to
complete.

There are other potential solutions to this problem, but this is the
quickest at this stage and has been tested both with and without
mount.gfs2 present in the system.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Reported-by: NDavid Booher <dbooher@adams.net>

Right now, there is nothing that forces the log to get flushed when a node
drops its rindex glock so that another node can grow the filesystem. If the
log doesn't get flushed, GFS2 can corrupt the sd_log_le_rg list in the
following way.

A node puts an rgd on the list in rg_lo_add(), and then the rindex glock is
dropped so the other node can grow the filesystem. When the node reacquires the
rindex glock, that rgd gets deleted in clear_rgrpdi() before ever being
removed from the list by gfs2_log_flush().

This code simply forces a log flush when the rindex glock is invalidated,
solving the problem.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Attribute IDs assigned in RFC 5661 now require three bitmaps.
Fixes hitting a BUG_ON in xdr_shrink_bufhead when getting ACLs.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Cc:stable@kernel.org [2.6.39]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...as that function can sleep.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Regression introduced in commit 724d9f1c.

Prior to that, expand_dfs_referral would regenerate the mount data string
and then call cifs_parse_mount_options to re-parse it (klunky, but it
worked). The above commit moved cifs_parse_mount_options out of cifs_mount,
so the re-parsing of the new mount options no longer occurred. Fix it by
making expand_dfs_referral re-parse the mount options.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

This needs to be done regardless of whether that KConfig option is set
or not.
Reported-by: NSven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Add an FS-Cache helper to bulk uncache pages on an inode.  This will
only work for the circumstance where the pages in the cache correspond
1:1 with the pages attached to an inode's page cache.

This is required for CIFS and NFS: When disabling inode cookie, we were
returning the cookie and setting cifsi->fscache to NULL but failed to
invalidate any previously mapped pages.  This resulted in "Bad page
state" errors and manifested in other kind of errors when running
fsstress.  Fix it by uncaching mapped pages when we disable the inode
cookie.

This patch should fix the following oops and "Bad page state" errors
seen during fsstress testing.

  ------------[ cut here ]------------
  kernel BUG at fs/cachefiles/namei.c:201!
  invalid opcode: 0000 [#1] SMP
  Pid: 5, comm: kworker/u:0 Not tainted 2.6.38.7-30.fc15.x86_64 #1 Bochs Bochs
  RIP: 0010: cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  RSP: 0018:ffff88002ce6dd00  EFLAGS: 00010282
  RAX: ffff88002ef165f0 RBX: ffff88001811f500 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000282
  RBP: ffff88002ce6dda0 R08: 0000000000000100 R09: ffffffff81b3a300
  R10: 0000ffff00066c0a R11: 0000000000000003 R12: ffff88002ae54840
  R13: ffff88002ae54840 R14: ffff880029c29c00 R15: ffff88001811f4b0
  FS:  00007f394dd32720(0000) GS:ffff88002ef00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007fffcb62ddf8 CR3: 000000001825f000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/u:0 (pid: 5, threadinfo ffff88002ce6c000, task ffff88002ce55cc0)
  Stack:
   0000000000000246 ffff88002ce55cc0 ffff88002ce6dd58 ffff88001815dc00
   ffff8800185246c0 ffff88001811f618 ffff880029c29d18 ffff88001811f380
   ffff88002ce6dd50 ffffffff814757e4 ffff88002ce6dda0 ffffffff8106ac56
  Call Trace:
   cachefiles_lookup_object+0x78/0xd4 [cachefiles]
   fscache_lookup_object+0x131/0x16d [fscache]
   fscache_object_work_func+0x1bc/0x669 [fscache]
   process_one_work+0x186/0x298
   worker_thread+0xda/0x15d
   kthread+0x84/0x8c
   kernel_thread_helper+0x4/0x10
  RIP  cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  ---[ end trace 1d481c9af1804caa ]---

I tested the uncaching by the following means:

 (1) Create a big file on my NFS server (104857600 bytes).

 (2) Read the file into the cache with md5sum on the NFS client.  Look in
     /proc/fs/fscache/stats:

	Pages  : mrk=25601 unc=0

 (3) Open the file for read/write ("bash 5<>/warthog/bigfile").  Look in proc
     again:

	Pages  : mrk=25601 unc=25601
Reported-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: NSuresh Jayaraman <sjayaraman@suse.de>
cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to make sure the data relocation inode doesn't go through
the delayed metadata updates, otherwise we get an oops during balance:

kernel BUG at fs/btrfs/relocation.c:4303!
[SNIP]
Call Trace:
 [<ffffffffa03143fd>] ? update_ref_for_cow+0x22d/0x330 [btrfs]
 [<ffffffffa0314951>] __btrfs_cow_block+0x451/0x5e0 [btrfs]
 [<ffffffffa031355d>] ? read_block_for_search+0x14d/0x4d0 [btrfs]
 [<ffffffffa0314beb>] btrfs_cow_block+0x10b/0x240 [btrfs]
 [<ffffffffa031acae>] btrfs_search_slot+0x49e/0x7a0 [btrfs]
 [<ffffffffa032d8af>] btrfs_lookup_inode+0x2f/0xa0 [btrfs]
 [<ffffffff8147bf0e>] ? mutex_lock+0x1e/0x50
 [<ffffffffa0380cf1>] btrfs_update_delayed_inode+0x71/0x160 [btrfs]
 [<ffffffffa037ff27>] ? __btrfs_release_delayed_node+0x67/0x190 [btrfs]
 [<ffffffffa0381cf8>] btrfs_run_delayed_items+0xe8/0x120 [btrfs]
 [<ffffffffa03365e0>] btrfs_commit_transaction+0x250/0x850 [btrfs]
 [<ffffffff810f91d9>] ? find_get_pages+0x39/0x130
 [<ffffffffa0336cd5>] ? join_transaction+0x25/0x250 [btrfs]
 [<ffffffff81081de0>] ? wake_up_bit+0x40/0x40
 [<ffffffffa03785fa>] prepare_to_relocate+0xda/0xf0 [btrfs]
 [<ffffffffa037f2bb>] relocate_block_group+0x4b/0x620 [btrfs]
 [<ffffffffa0334cf5>] ? btrfs_clean_old_snapshots+0x35/0x150 [btrfs]
 [<ffffffffa037fa43>] btrfs_relocate_block_group+0x1b3/0x2e0 [btrfs]
 [<ffffffffa0368ec0>] ? btrfs_tree_unlock+0x50/0x50 [btrfs]
 [<ffffffffa035e39b>] btrfs_relocate_chunk+0x8b/0x670 [btrfs]
 [<ffffffffa031303d>] ? btrfs_set_path_blocking+0x3d/0x50 [btrfs]
 [<ffffffffa03577d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs]
 [<ffffffffa031bea1>] ? btrfs_previous_item+0xb1/0x150 [btrfs]
 [<ffffffffa03577d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs]
 [<ffffffffa035f5aa>] btrfs_balance+0x21a/0x2b0 [btrfs]
 [<ffffffffa0368898>] btrfs_ioctl+0x798/0xd20 [btrfs]
 [<ffffffff8111e358>] ? handle_mm_fault+0x148/0x270
 [<ffffffff814809e8>] ? do_page_fault+0x1d8/0x4b0
 [<ffffffff81160d6a>] do_vfs_ioctl+0x9a/0x540
 [<ffffffff811612b1>] sys_ioctl+0xa1/0xb0
 [<ffffffff81484ec2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP  [<ffffffffa037c1cc>] btrfs_reloc_cow_block+0x22c/0x270 [btrfs]
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

A user reported an error where if we try to balance an fs after a device has
been removed it will blow up.  This is because we get an EIO back and this is
where BUG_ON(ret) bites us in the ass.  To fix we just exit.  Thanks,
Reported-by: NAnand Jain <Anand.Jain@oracle.com>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There are three missed mount options settable by user which are not
currently displayed in mount output.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@oracle.com>