em28xx.h contains lots of different stuff inside. The better is to break it on
some files.

This patch removes the register names, moving them to a separate file.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This is more conservative than just removing the msleep() from
em28xx_write_regs_req(), since some old hardware may still need it.
So, it will remove the sleep time only for those chips where this
removal were tested.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The analog entries are wrong. Fix it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Modifies em28xx-dvb not to use videobuf-dvb, but instead to include the code
for registering dvb devices locally and use the URB management code in the
em28xx driver directly. DVB data streaming should now work.
Signed-off-by: NAidan Thornton <makosoft@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Move the URB setup and management code to em28xx-core.c and generalise
it slighlty so that the DVB code can use it.
Signed-off-by: NAidan Thornton <makosoft@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing
this issue.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

em28xx-cards.c:
 - Fix reversed val/rst values in both analog_gpio and digital_gpio
   vectors
 - Fix crash that would was occurring during every analog startup
   while looping over gpio_ctl
 - Remove what appears to be a redundant setting of gpio_ctl->val
 - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC
   scanning from working)

em28xx-dvb.c:
 - Tuner should be in digital mode when issuing the reset
 - Add copyright
 - Change struct definition (corresponds to fix in em28xx-cards.c for
   gpio_ctl looping)
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> and Aidan
Thornton" <makosoft@googlemail.com> for pointing some errors with the
previous scenario.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

em28xx based devices with xc3028 may require some specific gpio values.
This patch adds a generic handling for such values.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds em28xx-dvb. This driver is highly based on cx88-dvb and
saa7134-dvb.

This code currently loads and unloads successfully. However, some
changes are needed to properly support the mpeg streams and to setup
em28xx to work on DVB mode.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Removes some fields from data structs.

There are some fields that are just caching some calculus for buffer
size. The calculus were moved to the places it were needed and the now
unused fields were removed.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch fixes three related issues and a fourth trivial one:

- Use buffers even if no-one's currently waiting for them (fixes
  underrun issues);

- Don't return incomplete/mangled frames at the start of streaming and
  in the case of buffer underruns;

- Fix an issue which could cause the driver to write to a buffer that's
  been freed after videobuf_queue_cancel is called (exposed by the
  previous two fixes - for some reason, ignoring buffers that weren't
  being waited on worked around the issue);

- Fix a bug which could cause only one field to be filled in the first
  buffer (or first few buffers) after streaming is started.
Signed-off-by: NAidan Thornton <makosoft@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It seems that we don't need a timeout for em28xx.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It fixes a couple of minor bugs, comments out a bogus BUG_ON, sets fh->type
correctly, uses dev->width and dev->height for now, and adds a missing spinlock
init (nasty - caused a system lockup). It also adds some debug code which
probably isn't all that useful. I haven't tested this version of the patch yet,
though, so I'm not sure what you can expect if you try it.
Signed-off-by: NAidan Thornton <makosoft@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The usage of videobuf-vmalloc allows to cleanup em28xx logic.

Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):

  39113    4876      40   44029    abfd old/em28xx.ko
  36731    4868      40   41639    a2a7 /home/v4l/master/v4l/em28xx.ko

Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.

A test with time command presented an even better result:

This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:

	The old driver:

$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used

	The videobuf-based driver:

$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used

	Conclusion:

The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

em28xx driver is capable of handling more than one usb device. However, isoc
transfers require a large amount of data to be transfered.

Before this patch, just one em28xx board were enough to allocate more than 50%
URBs:

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=480/800 us (60%), #Int=  0, #Iso=  2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1

So, only one board could use an USB host at the same time. After the patch, it
is possible to use more than one em28xx at the same time, on the same usb host,
if the image size is slower or equal to 345600, since those images will
require about 30% of the URBs:

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=232/800 us (29%), #Int=  0, #Iso=  2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1

So, in thesis, after the patch, it would be possible to use up to 3 boards by
each usb host, if the devices are generating small images.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch makes the following needlessly global functions static:
- em28xx-core.c:em28xx_write_reg_bits()
- em28xx-video.c:em28xx_vdev_init()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT
means the same thing.

Having two ways to say that a tuner is not present is
not nice, since it may lead to bad setups. In fact, with the previous
code, if a device were using has_tuner=0, but the user forces a tuner,
with modprobe option tuner=type, the modprobe option won't work.

Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent.
So, with the previous logic, in this case, the driver should set
has_tuner=0, or has_tuner=1 otherwise.

Instead of adding several additional tests and setups, better just to
remove .has_tuner.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This cleanup moves the board-specific configurations to em28xx-cards.c.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Older em28xx devices does implement standard Audio Class.

However, on newer devices, this were replaced by a Vendor Class. This
patch autodetects that an em28xx lacks Audio Class and auto-loads
em28xx-alsa, for the devices that implements only a Vendor Class.

For devices with Audio Class, snd-usb-audio module will provide an ALSA
interface.

This patch uses the request_module_async function as defined on cx88-mpeg.c, 
originally wrote by Markus Rechberger.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Also fixes the remaining CodingStyle issues that Lindent didn't fix.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Markus Rechberger <mrechberger@gmail.com> for retriving those
commands.

Also, MTS firmware is required for audio to work on HVR950.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It is possible to select audio inputs via em28xx or via ac97 functions.
This patch allows configuring a board to use either one way.

It also do some cleanups at audio setup configurations.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Xc2028.3028 has two type of firmwares: audio-standard specific ones and
baseband MTS firmwares. MTS firmwares provide stereo decoding for 6 MHz
BTSC/EIAJ and for monoaural audio decoding on 8 MHz firmwares.

It seems that the option to use MTS or a standard-specific audio decoding
depends on the way xc2028/3028 is connected.

Instead of wasting 32 (or 64 bits) to signalize if the driver needs to use MTS
firmware, this patch converts it to a bitfield that can be shared with other
proprieties of xc2028/3028.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The HVR-900 requires the MTS version of the xc3028 firmware in order
to get any sound. The below patch selects this firmware variant on
HVR-900 cards, as well as splitting the HVR-950 into its own entry
(since I don't know if it uses the MTS variant and it will have to be
split off eventually anyway).
Signed-off-by: NAidan Thornton <makosoft@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

With the conversion to the vidio_ioctl2, tvnorms array is not required anymore.

Also, removed some code from V4L1 time (VIDEO_MODE_foo), specied at the
non-used video_decoder.h.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There were some vestiges of an old V4L1 I2C driver that were called by em28xx.
This patch removes this dead code, and replaces videodev.h to videodev2.h

Now, this driver doesn't require V4L1 anymore.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Backport read() fixes from Markus Rechberger.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

On some situations, closing an streaming application and re-opening were
returning -EBUSY.

Uses the same locking schema also present on cx88.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Allows shared access support for em28xx. Just one userspace application is
allowed to get stream. The other(s) application(s) can change V4L2 controls,
set video standards, etc.

This patch were splited from Markus Rechberger's tree and backported to 2.6.17
by Pádraig Brady.

The original patch were ported to the latest em28xx version and had CodingStyle
corrected to solve the issues pointed by scripts/checkpatch.pl.

Thanks to Pádraig Brady <P@draigBrady.com> for pointing this.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Adds autodetection support for the Cinergy200 USB and the VGear PocketTV.

Whenever a usb device with generic empia em2800 usb ids is detected the device
gets scanned for connected i2c devices. If the device list matches an em2800
device in the device list the model id gets changed accordingly.
Signed-off-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

attached patch adds support for the vgear pockettv.
It seems to require a write to another register for audio to work.
I checked my old cinergydrv and we did the same register write there. I
therefore enabled it for all em2800 based devices.
Signed-off-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The attached patch modifies the em28xx driver so that there can be ioctls from
multiple different threads.

This is necessary for capture apps like MPlayer that use different threads for
capturing and channel tuning.

Now the locking is only done for the ioctls that change properties of the
device or access the i2c bus.

It also removes some locks that look unnecessary:

In em28xx_init_dev:
  the videodevice is not registered yet so nothing can access the hardware
 meanwhile, the device struct is not assigned to the interface yet so no race
 with disconnect is possible

In em28xx_release_resources:
  it gets only called when dev->lock is already held
Signed-off-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds a function to allow trying to detect boards that shares
the generic IDs.

The current detection method is based at eeprom checksum.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>