include/linux/of_net.h:16: warning: type qualifiers ignored on function return type
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c)
renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h
but changed drivers/usb/phy/phy-fsm-usb.c to include not existing
"phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building:
  ...
  drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1

This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h
to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting
in another build breakage:
  ...
  In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
  drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1

Fix both issues.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit c1117afb (USB: OHCI: make ohci-pci a separate driver)
neglected to preserve the entries for the pci_suspend and pci_resume
driver callbacks.  As a result, OHCI controllers don't work properly
during suspend and after hibernation.

This patch adds the missing callbacks to the driver.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: NSteve Cotton <steve@s.cotton.clara.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit dcd7b8bd ("staging: comedi: put
module _after_ detach" by myself) reversed a couple of calls in
`comedi_device_attach()` when recovering from an error returned by the
low-level driver's 'attach' handler.  Unfortunately, that introduced a
NULL pointer dereference bug as `dev->driver` is NULL after the call to
`comedi_device_detach()`.   We still have a pointer to the low-level
comedi driver structure in the `driv` variable, so use that instead.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Being a low-level component, various drivers (e.g.  olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe.  Therefore the OLPC EC driver must be initialised before other
drivers try to use it.  This was the case until it was recently moved
out of arch/x86 and restructured around commits ac250415 ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86:
OLPC: switch over to using new EC driver on x86").

Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.

Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC.  The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Paul Fox <pgf@laptop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit fba87559 ("disable TX in be_close()") disabled TX in be_close()
to protect be_xmit() from touching freed up queues in the AER recovery
flow.  But, TX must be disabled *before* cleaning up TX completions in
the close() path, not after. This allows be_tx_compl_clean() to free up
all TX-req skbs that were notified to the HW.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Revert commit c04c697c (ACPI / video: Always call acpi_video_init_brightness()
on init), because it breaks eDP backlight at 1920x1080 on Acer Aspire S3
for Trevor Bortins.

References: https://bugs.freedesktop.org/show_bug.cgi?id=68355Reported-and-bisected-by: NTrevor Bortins <enabfluw@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

By popular demand, this patch brings back a couple of sysfs attributes
removed by commit 663e0890
"[SCSI] zfcp: remove access control tables interface".
The content has been irrelevant for years, but the files must be
there forever for whatever user space tools that may rely on them.

Since these files always return a constant value, a new stripped
down show-macro was required. Otherwise build warnings would have
been introduced.
Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

BUG: sleeping function called from invalid context at kernel/workqueue.c:2752
in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700
CPU: 1 Not tainted 3.9.3+ #69
Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30)
<snip>
Call Trace:
([<00000000001165de>] show_trace+0x106/0x154)
 [<00000000001166a0>] show_stack+0x74/0xf4
 [<00000000006ff646>] dump_stack+0xc6/0xd4
 [<000000000017f3a0>] __might_sleep+0x128/0x148
 [<000000000015ece8>] flush_work+0x54/0x1f8
 [<00000000001630de>] __cancel_work_timer+0xc6/0x128
 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c
 [<0000000000161816>] execute_in_process_context+0x96/0xa8
 [<00000000004d33d8>] device_release+0x60/0xc0
 [<000000000048af48>] kobject_release+0xa8/0x1c4
 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130
 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp]
 [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp]
 [<000000000016b75a>] kthread+0xf2/0xfc
 [<000000000070c9de>] kernel_thread_starter+0x6/0xc
 [<000000000070c9d8>] kernel_thread_starter+0x0/0xc

Apparently, the ref_count for some scsi_device drops down to zero,
triggering device removal through execute_in_process_context(), while
the lldd error recovery thread iterates through a scsi device list.
Unfortunately, execute_in_process_context() decides to immediately
execute that device removal function, instead of scheduling asynchronous
execution, since it detects process context and thinks it is safe to do
so. But almost all calls to shost_for_each_device() in our lldd are
inside spin_lock_irq, even in thread context. Obviously, schedule()
inside spin_lock_irq sections is a bad idea.

Change the lldd to use the proper iterator function,
__shost_for_each_device(), in combination with required locking.

Occurences that need to be changed include all calls in zfcp_erp.c,
since those might be executed in zfcp error recovery thread context
with a lock held.

Other occurences of shost_for_each_device() in zfcp_fsf.c do not
need to be changed (no process context, no surrounding locking).

The problem was introduced in Linux 2.6.37 by commit
b62a8d9b
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit".
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org #2.6.37+
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch adds wait_event_interruptible_lock_irq_timeout(), which is a
straight-forward descendant of wait_event_interruptible_timeout() and
wait_event_interruptible_lock_irq().

The zfcp driver used to call wait_event_interruptible_timeout()
in combination with some intricate and error-prone locking. Using
wait_event_interruptible_lock_irq_timeout() as a replacement
nicely cleans up that locking.

This rework removes a situation that resulted in a locking imbalance
in zfcp_qdio_sbal_get():

BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10
    last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp]

It was introduced by commit c2af7545
"[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new
code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit
without a required lock being held. The problem occured when a
special, non-SCSI I/O request was being submitted in process context,
when the adapter's queues had been torn down. In this case the bug
surfaced when the Fibre Channel port connection for a well-known address
was closed during a concurrent adapter shut-down procedure, which is a
rare constellation.

This patch also fixes these warnings from the sparse tool (make C=1):

drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in
 'zfcp_qdio_sbal_check' - wrong count at exit
drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in
 'zfcp_qdio_sbal_get' - unexpected unlock

Last but not least, we get rid of that crappy lock-unlock-lock
sequence at the beginning of the critical section.

It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held.
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org #2.6.35+
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

As Sergei Shtylyov explained in the #mipslinux IRC channel:
[Mon 2013-08-19 12:28:21 PM PDT] <headless> guys, are you sure it's not "DMA off stack" case?
[Mon 2013-08-19 12:28:35 PM PDT] <headless> it's a known stack corruptor on non-coherent arches
[Mon 2013-08-19 12:31:48 PM PDT] <DonkeyHotei> headless: for usb/ehci?
[Mon 2013-08-19 12:34:11 PM PDT] <DonkeyHotei> headless: explain
[Mon 2013-08-19 12:35:38 PM PDT] <headless> usb_control_msg() (or other such func) should not use buffer on stack. DMA from/to stack is prohibited
[Mon 2013-08-19 12:35:58 PM PDT] <headless> and EHCI uses DMA on control xfers (as well as all the others)
Signed-off-by: NDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to get an interface specification if we know it's the
wrong one.
Signed-off-by: NDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Already existing property flags are filled wrong for properties created from
initial FDT. This could cause problems if this DYNAMIC device-tree functions
are used later, i.e. properties are attached/detached/replaced. Simply dumping
flags from the running system show, that some initial static (not allocated via
kzmalloc()) nodes are marked as dynamic.

I putted some debug extensions to property_proc_show(..) :
..
+       if (OF_IS_DYNAMIC(pp))
+               pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n");
+       if (OF_IS_DETACHED(pp))
+               pr_err("DEBUG: xxx : OF_IS_DETACHED\n");

when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you
will see that those flags are filled wrong, basically in most cases it will dump
a DYNAMIC or DETACHED status, which is in not true.
(BTW. this OF_IS_DETACHED is a own define for debug purposes which which just
make a test_bit(OF_DETACHED, &x->_flags)

If nodes are dynamic kernel is allowed to kfree() them. But it will crash
attempting to do so on the nodes from FDT -- they are not allocated via
kzmalloc().
Signed-off-by: NWladislav Wiebe <wladislav.kw@gmail.com>
Acked-by: NAlexander Sverdlin <alexander.sverdlin@nsn.com>
Cc: stable@vger.kernel.org
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

Some Poulsbo cards seem to incorrectly report SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED instead of SDVO_CMD_STATUS_PENDING, which causes the display to be turned off.
Signed-off-by: NGuillaume Clement <gclement@baobob.org>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We want ppc64 to be able to select between optimised assembly
checksum routines in big endian and the generic lib/checksum.c
routines in little endian.

The lpfc driver is forcing CONFIG_GENERIC_CSUM on which means
we are unable to make the decision to enable it in the arch
Kconfig. If the option exists it is always forced on.

This got introduced in 3.10 via commit 6a7252fd ([SCSI] lpfc:
fix up Kconfig dependencies). I spoke to Randy about it and
the original issue was with CRC_T10DIF not being defined.

As such, remove the select of CONFIG_GENERIC_CSUM.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

commit 385904f8 ('sfc: Don't use
efx_filter_{build,hash,increment}() for default MAC filters') used the
wrong name to find the index of default RX MAC filters at insertion/
update time.  This could result in memory corruption and would in any
case silently fail to update the filter.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In commit 77145f1c was introduced
error which cause that reclocking on nv40 not working anymore.
There is missing assigment of return value from pll_calc to ret.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allocating type=0 marks the memory as free. This allows the ltcg memory
to be allocated twice.

Add a BUG_ON in core/mm.c to prevent this ever happening again.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some registers were not initialized in init, this causes them to be
uninitialized after suspend.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Commit dceef5d8 (drm/nouveau/fb: initialise vram controller as pfb
sub-object) moved some code around and introduced these null derefs.
pfb->ram is set to the new ram object outside of this ctor.
Reported-by: NRonald Uitermark <ronald645@gmail.com>
Tested-by: NRonald Uitermark <ronald645@gmail.com>
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This is to fix a problem in the rtl8211 where the driver
wasn't properly enabled the interrupt on link change status.
it has to enable the ineterrupt on the bit 10 in the register 18
(INER).
Reported-by: NSharma Bhupesh <B45370@freescale.com>
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not clear Broadcast/Multicast/Unicast Wake Flag or LanWake in
Config5. This is necessary to preserve WOL state when the driver is
loaded. Although the r8168 vendor driver does not write Config5 (it has
been commented out), Hayes Wang from Realtek said that masking bits like
this is more sensible.
Signed-off-by: NPeter Wu <lekensteyn@gmail.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If via_ircc_open() fails, data structures of the driver left uninitialized,
but probe (via_init_one()) returns zero. That can lead to null pointer dereference
in via_remove_one(), since it does not check drvdata for NULL.

The patch implements proper error code propagation.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the user turns off VNET_HDR support on the
macvtap device, there is no way to provide any
offload information to the user.  So, it's safer
to ignore offload setting then depend on the user
setting them correctly.
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the user turns off IFF_VNET_HDR flag, attempts to change
offload features via TUNSETOFFLOAD do not work.  This could cause
GSO packets to be delivered to the user when the user is
not prepared to handle them.

To solve, allow processing of TUNSETOFFLOAD when IFF_VNET_HDR is
disabled.
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In macvtap, tap_features specific the features of that the user
has specified via ioctl().  If we treat macvtap as a macvlan+tap
then we could all the tap a pseudo-device and give it other features
like SG and GSO.  Then we can stop using the features of lower
device (macvlan) when forwarding the traffic the tap.

This solves the issue of possible checksum offload mismatch between
tap feature and macvlan features.
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a event is being bound to a VCPU there is a window between the
EVTCHNOP_bind_vpcu call and the adjustment of the local per-cpu masks
where an event may be lost.  The hypervisor upcalls the new VCPU but
the kernel thinks that event is still bound to the old VCPU and
ignores it.

There is even a problem when the event is being bound to the same VCPU
as there is a small window beween the clear_bit() and set_bit() calls
in bind_evtchn_to_cpu().  When scanning for pending events, the kernel
may read the bit when it is momentarily clear and ignore the event.

Avoid this by masking the event during the whole bind operation.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
CC: stable@vger.kernel.org

The sizeof() argument in init_evtchn_cpu_bindings() is incorrect
resulting in only the first 64 (or 32 in 32-bit guests) ports having
their bindings being initialized to VCPU 0.

In most cases this does not cause a problem as request_irq() will set
the irq affinity which will set the correct local per-cpu mask.
However, if the request_irq() is called on a VCPU other than 0, there
is a window between the unmasking of the event and the affinity being
set were an event may be lost because it is not locally unmasked on
any VCPU. If request_irq() is called on VCPU 0 then local irqs are
disabled during the window and the race does not occur.

Fix this by initializing all NR_EVENT_CHANNEL bits in the local
per-cpu masks.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: stable@vger.kernel.org

Before this patch, I was seeing the following lockdep splat on my
MPC8315 (PPC32) target:

  [    9.086051] =================================
  [    9.090393] [ INFO: inconsistent lock state ]
  [    9.094744] 3.9.7-ajf-gc39503d #1 Not tainted
  [    9.099087] ---------------------------------
  [    9.103432] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
  [    9.109431] scsi_eh_1/39 [HC1[1]:SC0[0]:HE0:SE1] takes:
  [    9.114642]  (&(&host->lock)->rlock){?.+...}, at: [<c02f4168>] sata_fsl_interrupt+0x50/0x250
  [    9.123137] {HARDIRQ-ON-W} state was registered at:
  [    9.128004]   [<c006cdb8>] lock_acquire+0x90/0xf4
  [    9.132737]   [<c043ef04>] _raw_spin_lock+0x34/0x4c
  [    9.137645]   [<c02f3560>] fsl_sata_set_irq_coalescing+0x68/0x100
  [    9.143750]   [<c02f36a0>] sata_fsl_init_controller+0xa8/0xc0
  [    9.149505]   [<c02f3f10>] sata_fsl_probe+0x17c/0x2e8
  [    9.154568]   [<c02acc90>] driver_probe_device+0x90/0x248
  [    9.159987]   [<c02acf0c>] __driver_attach+0xc4/0xc8
  [    9.164964]   [<c02aae74>] bus_for_each_dev+0x5c/0xa8
  [    9.170028]   [<c02ac218>] bus_add_driver+0x100/0x26c
  [    9.175091]   [<c02ad638>] driver_register+0x88/0x198
  [    9.180155]   [<c0003a24>] do_one_initcall+0x58/0x1b4
  [    9.185226]   [<c05aeeac>] kernel_init_freeable+0x118/0x1c0
  [    9.190823]   [<c0004110>] kernel_init+0x18/0x108
  [    9.195542]   [<c000f6b8>] ret_from_kernel_thread+0x64/0x6c
  [    9.201142] irq event stamp: 160
  [    9.204366] hardirqs last  enabled at (159): [<c043f778>] _raw_spin_unlock_irq+0x30/0x50
  [    9.212469] hardirqs last disabled at (160): [<c000f414>] reenable_mmu+0x30/0x88
  [    9.219867] softirqs last  enabled at (144): [<c002ae5c>] __do_softirq+0x168/0x218
  [    9.227435] softirqs last disabled at (137): [<c002b0d4>] irq_exit+0xa8/0xb4
  [    9.234481]
  [    9.234481] other info that might help us debug this:
  [    9.240995]  Possible unsafe locking scenario:
  [    9.240995]
  [    9.246898]        CPU0
  [    9.249337]        ----
  [    9.251776]   lock(&(&host->lock)->rlock);
  [    9.255878]   <Interrupt>
  [    9.258492]     lock(&(&host->lock)->rlock);
  [    9.262765]
  [    9.262765]  *** DEADLOCK ***
  [    9.262765]
  [    9.268684] no locks held by scsi_eh_1/39.
  [    9.272767]
  [    9.272767] stack backtrace:
  [    9.277117] Call Trace:
  [    9.279589] [cfff9da0] [c0008504] show_stack+0x48/0x150 (unreliable)
  [    9.285972] [cfff9de0] [c0447d5c] print_usage_bug.part.35+0x268/0x27c
  [    9.292425] [cfff9e10] [c006ace4] mark_lock+0x2ac/0x658
  [    9.297660] [cfff9e40] [c006b7e4] __lock_acquire+0x754/0x1840
  [    9.303414] [cfff9ee0] [c006cdb8] lock_acquire+0x90/0xf4
  [    9.308745] [cfff9f20] [c043ef04] _raw_spin_lock+0x34/0x4c
  [    9.314250] [cfff9f30] [c02f4168] sata_fsl_interrupt+0x50/0x250
  [    9.320187] [cfff9f70] [c0079ff0] handle_irq_event_percpu+0x90/0x254
  [    9.326547] [cfff9fc0] [c007a1fc] handle_irq_event+0x48/0x78
  [    9.332220] [cfff9fe0] [c007c95c] handle_level_irq+0x9c/0x104
  [    9.337981] [cfff9ff0] [c000d978] call_handle_irq+0x18/0x28
  [    9.343568] [cc7139f0] [c000608c] do_IRQ+0xf0/0x1a8
  [    9.348464] [cc713a20] [c000fc8c] ret_from_except+0x0/0x14
  [    9.353983] --- Exception: 501 at _raw_spin_unlock_irq+0x40/0x50
  [    9.353983]     LR = _raw_spin_unlock_irq+0x30/0x50
  [    9.364839] [cc713af0] [c043db10] wait_for_common+0xac/0x188
  [    9.370513] [cc713b30] [c02ddee4] ata_exec_internal_sg+0x2b0/0x4f0
  [    9.376699] [cc713be0] [c02de18c] ata_exec_internal+0x68/0xa8
  [    9.382454] [cc713c20] [c02de4b8] ata_dev_read_id+0x158/0x594
  [    9.388205] [cc713ca0] [c02ec244] ata_eh_recover+0xd88/0x13d0
  [    9.393962] [cc713d20] [c02f2520] sata_pmp_error_handler+0xc0/0x8ac
  [    9.400234] [cc713dd0] [c02ecdc8] ata_scsi_port_error_handler+0x464/0x5e8
  [    9.407023] [cc713e10] [c02ecfd0] ata_scsi_error+0x84/0xb8
  [    9.412528] [cc713e40] [c02c4974] scsi_error_handler+0xd8/0x47c
  [    9.418457] [cc713eb0] [c004737c] kthread+0xa8/0xac
  [    9.423355] [cc713f40] [c000f6b8] ret_from_kernel_thread+0x64/0x6c

This fix was suggested by Bhushan Bharat <R65777@freescale.com>, and
was discussed in email at:

  http://linuxppc.10917.n7.nabble.com/MPC8315-reboot-failure-lockdep-splat-possibly-related-tp75162.html

Same patch successfully tested with 3.9.7.  linux-next compiled but
not tested on hardware.

This patch is based off linux-next tag next-20130819
(which is commit 66a01bae29d11916c09f9f5a937cafe7d402e4a5 )
Signed-off-by: NAnthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

There are possible HW configurations in which PFs will have SR-IOV capability
but will have Max VFs set to 0 - this happens when there are Multi-Function
devices where the VFs are allocated to only some of the PFs.

DMAE is configured to support VFs only if the configuring PF has supported VFs.
In case the first PF to be loaded will be one without supported VFs, it will
not configure DMAE to the VF-supporting mode. When VFs of other PFs will be
loaded later on, they will not be able to communicate with their PF.

This changes the requirement for configuring DMAE for VF-supporting mode;
If the device has SR-IOV capabilities there must be some PF that has
max supported VFs > 0, thus it will configure the DMAE for supporting VFs.
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since SR-IOV can be activated dynamically and iproute2 can be called
asynchronously, the various callbacks need a robust sanity check before
attempting to access the SR-IOV database and members since there are numerous
states in which it can find the driver (e.g., PF is down, sriov was not enabled
yet, VF is down, etc.).

In many of the states the callback result will be null pointer dereference.
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During probe, VFs might erroneously try to access the shared memory (which
only PFs are capabale of accessing), causing benign attentions to appear.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When publishing information via getfeatcfg(), bnx2x driver didn't consider
remote errors (e.g., switch that doesn't support DCBX) when setting the
error flags.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After notification that DCBX configuration has ended arrived to the driver,
the driver configured the FW/HW in sleepless context.
As a result, it was possible to reach a race (mostly with CNIC registration)
in which the configuration will return a timeout, failing to set the DCBX
results correctly.

This patch moves the configuration following the DCBX end into the slowpath
RTNL task (i.e., sleepless context protected by the RTNL lock), allowing the
configuration to cope with such races.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 3deb8167 "bnx2x: Add a periodic task for link PHY events"
link state changes can be detected not only via the attention flow but also
from the periodic task.
If the link state will change in such a manner (i.e., via the periodic task),
dropless flow-control will not be configured.

This patch remedies the issue, adding the missing configuration to all required
flows.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

forgot to convert channel index to data register
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fixing support for the Silicon Image 3826 port multiplier, by applying
to it the same quirks applied to the Silicon Image 3726.  Specifically
fixes the repeated timeout/reset process which previously afflicted
the 3726, as described from line 290.  Slightly based on notes from:

https://bugzilla.redhat.com/show_bug.cgi?id=890237Signed-off-by: NTerry Suereth <terry.suereth@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

This fixes a WARN in i915_gem_free_object when the
obj->pages_pin_count isn't 0.

v2: Add locking to unmap, noticed by Chris Wilson. Note that even
though we call unmap with our own dev->struct_mutex held that won't
result in an immediate deadlock since we never go through the dma_buf
interfaces for our own, reimported buffers. But it's still easy to
blow up and anger lockdep, but that's already the case with our ->map
implementation. Fixing this for real will involve per dma-buf ww mutex
locking by the callers. And lots of fun. So go with the duct-tape
approach for now.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Armin K. <krejzi@email.com> (v1)
Tested-by: NDave Airlie <airlied@redhat.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@gmail.com>