PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.

This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
        -default, BIOS default setting
        -powersave, highest power saving mode, enable all available ASPM
state and clock power management
        -performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.

In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.

Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The "pci=routeirq" option was added in 2004, and I don't get any valid
reports anymore.  The option is still mentioned in kernel-parameters.txt.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The PCI bus names included in /proc/iomem and /proc/ioports are
of the form 'PCI Bus #XX' where XX is the bus number.  This patch
changes the naming to 'PCI Bus XXXX:YY' where XXXX is the domain
number and YY is the bus number.  For example, PCI bus 14 in
domain 0 will show as 'PCI Bus 0000:14' instead of 'PCI Bus #14'.
This change makes the naming consistent with other architectures
such as ia64 where multiple PCI domain support has been around
longer.
Signed-off-by: NGary Hade <garyhade@us.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

#if 0 the no longer used pci_cleanup_aer_correct_error_status().
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[PATCH] pcie AER: don't check _OSC when acpi is disabled

when acpi=off or pci=noacpi, get warning

AER service couldn't init device 0000:00:0a.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:0e.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:0f.0:pcie01 - no _OSC support
AER service couldn't init device 0000:80:0b.0:pcie01 - no _OSC support
AER service couldn't init device 0000:80:0e.0:pcie01 - no _OSC support
AER service couldn't init device 0000:80:0f.0:pcie01 - no _OSC support

so don't check _OSC in aer_osc_setup
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch finally removes the global list of PCI devices.  We are
relying entirely on the list held in the driver core now, and do not
need a separate "shadow" list as no one uses it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the parisc usage of the global_list, as it's not needed anymore.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This function was obviously never being used since early 2.5 days as any
device that it would try to remove would never really be removed from
the system due to the PCI device list being held in the driver core, not
the general list of PCI devices.

As we have not had a single report of a problem here in 4 years, I think
it's safe to remove now.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This lets us check if the device is really added to the driver core or
not, which is what we need when walking some of the bus lists.  The flag
is there in anticipation of getting rid of the other PCI device list,
which is what we used to check in this situation.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

no_pci_devices() should use the driver core list of PCI devices, not our
"separate" one.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We currently keep 2 lists of PCI devices in the system, one in the
driver core, and one all on its own.  This second list is sorted at boot
time, in "BIOS" order, to try to remain compatible with older kernels
(2.2 and earlier days).  There was also a "nosort" option to turn this
sorting off, to remain compatible with even older kernel versions, but
that just ends up being what we have been doing from 2.5 days...

Unfortunately, the second list of devices is not really ever used to 
determine the probing order of PCI devices or drivers[1].  That is done
using the driver core list instead.  This change happened back in the
early 2.5 days.

Relying on BIOS ording for the binding of drivers to specific device
names is problematic for many reasons, and userspace tools like udev
exist to properly name devices in a persistant manner if that is needed,
no reliance on the BIOS is needed.

Matt Domsch and others at Dell noticed this back in 2006, and added a
boot option to sort the PCI device lists (both of them) in a
breadth-first manner to help remain compatible with the 2.4 order, if
needed for any reason.  This option is not going away, as some systems
rely on them.

This patch removes the sorting of the internal PCI device list in "BIOS"
mode, as it's not needed at all anymore, and hasn't for many years.
I've also removed the PCI flags for this from some other arches that for
some reason defined them, but never used them.

This should not change the ordering of any drivers or device probing.

[1] The old-style pci_get_device and pci_find_device() still used this
sorting order, but there are very few drivers that use these functions,
as they are deprecated for use in this manner.  If for some reason, a
driver rely on the order and uses these functions, the breadth-first
boot option will resolve any problem.

Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This was marked incorrectly for some reason.  Allow the ibmphp driver to
be built even if PCI_LEGACY is not enabled.

Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes the depandancy of the cpcihp driver from the PCI_LEGACY
config option by removing its usage of the pci_find_bus() function.


Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NScott Murray <scottm@somanetworks.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This cleans up the search.c file, now using the pci list of devices that
are created for the driver core, instead of relying on our separate list
of devices.  It's better to use the functions already created for this
kind of thing, instead of rolling our own all the time.

This work is done in anticipation of getting rid of that second list of
pci devices all together.

And it ends up saving code, always a nice benefit.

This also removes one compiler warning for when CONFIG_PCI_LEGACY is
enabled as we no longer internally use the deprecated functions anymore.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes the pci_get_device_reverse function as there should not be
any need to walk pci devices backwards anymore.  All users of this call
are now gone from the tree, so it is safe to remove it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This isn't needed, we can just walk the devices in bus order with no
problems at all, as we really want to remove pci_get_device_reverse from
the kernel tree.
Acked-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No one is using this function anymore for quite some time, so remove it.
Everyone calls pci_dev_present() instead anyway...
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

An unused function that bloated the kernel only when CONFIG_EMBEDDED was
enabled...
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Create Documentation/PCI/ and move PCI-related files to it.
Fix a few instances of trailing whitespace.
Update references to the new file locations.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  security: fix up documentation for security_module_enable
  Security: Introduce security= boot parameter
  Audit: Final renamings and cleanup
  SELinux: use new audit hooks, remove redundant exports
  Audit: internally use the new LSM audit hooks
  LSM/Audit: Introduce generic Audit LSM hooks
  SELinux: remove redundant exports
  Netlink: Use generic LSM hook
  Audit: use new LSM hooks instead of SELinux exports
  SELinux: setup new inode/ipc getsecid hooks
  LSM: Introduce inode_getsecid and ipc_getsecid hooks

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

security_module_enable() can only be called during kernel init.
Signed-off-by: NJames Morris <jmorris@namei.org>

Add the security= boot parameter. This is done to avoid LSM
registration clashes in case of more than one bult-in module.

User can choose a security module to enable at boot. If no
security= boot parameter is specified, only the first LSM
asking for registration will be loaded. An invalid security
module name will be treated as if no module has been chosen.

LSM modules must check now if they are allowed to register
by calling security_module_enable(ops) first. Modify SELinux
and SMACK to do so.

Do not let SMACK register smackfs if it was not chosen on
boot. Smackfs assumes that smack hooks are registered and
the initial task security setup (swapper->security) is done.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Rename the se_str and se_rule audit fields elements to
lsm_str and lsm_rule to avoid confusion.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Setup the new Audit LSM hooks for SELinux.
Remove the now redundant exported SELinux Audit interface.

Audit: Export 'audit_krule' and 'audit_field' to the public
since their internals are needed by the implementation of the
new LSM hook 'audit_rule_known'.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Convert Audit to use the new LSM Audit hooks instead of
the exported SELinux interface.

Basically, use:
security_audit_rule_init
secuirty_audit_rule_free
security_audit_rule_known
security_audit_rule_match

instad of (respectively) :
selinux_audit_rule_init
selinux_audit_rule_free
audit_rule_has_selinux
selinux_audit_rule_match
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Introduce a generic Audit interface for security modules
by adding the following new LSM hooks:

audit_rule_init(field, op, rulestr, lsmrule)
audit_rule_known(krule)
audit_rule_match(secid, field, op, rule, actx)
audit_rule_free(rule)

Those hooks are only available if CONFIG_AUDIT is enabled.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Remove the following exported SELinux interfaces:
selinux_get_inode_sid(inode, sid)
selinux_get_ipc_sid(ipcp, sid)
selinux_get_task_sid(tsk, sid)
selinux_sid_to_string(sid, ctx, len)

They can be substitued with the following generic equivalents
respectively:
new LSM hook, inode_getsecid(inode, secid)
new LSM hook, ipc_getsecid*(ipcp, secid)
LSM hook, task_getsecid(tsk, secid)
LSM hook, sid_to_secctx(sid, ctx, len)
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Don't use SELinux exported selinux_get_task_sid symbol.
Use the generic LSM equivalent instead.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Stop using the following exported SELinux interfaces:
selinux_get_inode_sid(inode, sid)
selinux_get_ipc_sid(ipcp, sid)
selinux_get_task_sid(tsk, sid)
selinux_sid_to_string(sid, ctx, len)
kfree(ctx)

and use following generic LSM equivalents respectively:
security_inode_getsecid(inode, secid)
security_ipc_getsecid*(ipcp, secid)
security_task_getsecid(tsk, secid)
security_sid_to_secctx(sid, ctx, len)
security_release_secctx(ctx, len)

Call security_release_secctx only if security_secid_to_secctx
succeeded.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Setup the new inode_getsecid and ipc_getsecid() LSM hooks
for SELinux.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

Introduce inode_getsecid(inode, secid) and ipc_getsecid(ipcp, secid)
LSM hooks. These hooks will be used instead of similar exported
SELinux interfaces.

Let {inode,ipc,task}_getsecid hooks set the secid to 0 by default
if CONFIG_SECURITY is not defined or if the hook is set to
NULL (dummy). This is done to notify the caller that no valid
secid exists.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>
Reviewed-by: NPaul Moore <paul.moore@hp.com>

This patch effectively reverts commit d0498d9a
aka "[NET]: Do not allocate unneeded memory for dev->priv alignment."
It was found to be buggy because of final unconditional += NETDEV_ALIGN_CONST
removal.

For example, for sizeof(struct net_device) being 2048 bytes, "alloc_size"
was also 2048 bytes, but allocator with debugging options turned on started
giving out !32-byte aligned memory resulting in redzones overwrites.

Patch does small optimization in ->priv'less case: bumping size to next
32-byte boundary was always done to ensure ->priv will also be aligned.
But, no ->priv, no need to do that.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

do not return a -EINVAL when mmap()-ing PCI holes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits)
  [SCSI] iscsi: bidi support for iscsi_tcp
  [SCSI] iscsi: bidi support at the generic libiscsi level
  [SCSI] iscsi: extended cdb support
  [SCSI] zfcp: Fix error handling for blocked unit for send FCP command
  [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock
  [SCSI] zfcp: fix 31 bit compile warnings
  [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands
  [SCSI] bsg: remove minor in struct bsg_device
  [SCSI] bsg: use better helper list functions
  [SCSI] bsg: replace kobject_get with blk_get_queue
  [SCSI] bsg: takes a ref to struct device in fops->open
  [SCSI] qla1280: remove version check
  [SCSI] libsas: fix endianness bug in sas_ata
  [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next)
  [SCSI] aacraid: Do not describe check_reset parameter with its value
  [SCSI] aacraid: Fix down_interruptible() to check the return value
  [SCSI] sun3_scsi_vme: add MODULE_LICENSE
  [SCSI] st: rename flush_write_buffer()
  [SCSI] tgt: use KMEM_CACHE macro
  [SCSI] initio: fix big endian problems for auto request sense
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (43 commits)
  firewire: cleanups
  firewire: fix synchronization of gap counts
  firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)
  firewire: remove unused struct member
  firewire: use bitwise and to get reg in handle_registers
  firewire: replace more hex values with defined csr constants
  firewire: reread config ROM when device reset the bus
  firewire: replace static ROM cache by allocated cache
  firewire: fw-ohci: work around generation bug in TI controllers (fix AV/C and more)
  firewire: fw-ohci: extend logging of bus generations and node ID
  firewire: fw-ohci: conditionally log busReset interrupts
  firewire: fw-ohci: don't append to AT context when it's not active
  firewire: fw-ohci: log regAccessFail events
  firewire: fw-ohci: make sure HCControl register LPS bit is set
  firewire: fw-ohci: missing PPC PMac feature calls in failure path
  firewire: fw-ohci: untangle a mixed unsigned/signed expression
  firewire: debug interrupt events
  firewire: fw-ohci: catch self_id_count == 0
  firewire: fw-ohci: add self ID error check
  firewire: fw-ohci: refactor probe, remove, suspend, resume
  ...

The kernel now panics reliably on boot if you have a SATAPI device
connected.

The problem was introduced by the libata merge trying to pull out all
the SFF code into a separate module.  Unfortunately, if you're a satapi
device you usually need to call atapi_request_sense, which has a bare
invocation of a SFF callback which is NULL on non-SFF HBAs.  Fix this by
making the call conditional.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits)
  ocfs2/net: Add debug interface to o2net
  ocfs2: Only build ocfs2/dlm with the o2cb stack module
  ocfs2/cluster: Get rid of arguments to the timeout routines
  ocfs2: Put tree in MAINTAINERS
  ocfs2: Use BUG_ON
  ocfs2: Convert ocfs2 over to unlocked_ioctl
  ocfs2: Improve rename locking
  fs/ocfs2/aops.c: test for IS_ERR rather than 0
  ocfs2: Add inode stealing for ocfs2_reserve_new_inode
  ocfs2: Add ac_alloc_slot in ocfs2_alloc_context
  ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits
  ocfs2: Enable cross extent block merge.
  ocfs2: Add support for cross extent block
  ocfs2: Move /sys/o2cb to /sys/fs/o2cb
  sysfs: Allow removal of symlinks in the sysfs root
  ocfs2:  Reconnect after idle time out.
  ocfs2/dlm: Cleanup lockres print
  ocfs2/dlm: Fix lockname in lockres print function
  ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c
  ocfs2/dlm: Dumps the purgelist into a debugfs file
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits)
  [GFS2] fix assertion in log_refund()
  [GFS2] fix GFP_KERNEL misuses
  [GFS2] test for IS_ERR rather than 0
  [GFS2] Invalidate cache at correct point
  [GFS2] fs/gfs2/recovery.c: suppress warnings
  [GFS2] Faster gfs2_bitfit algorithm
  [GFS2] Streamline quota lock/check for no-quota case
  [GFS2] Remove drop of module ref where not needed
  [GFS2] gfs2_adjust_quota has broken unstuffing code
  [GFS2] possible null pointer dereference fixup
  [GFS2] Need to ensure that sector_t is 64bits for GFS2
  [GFS2] re-support special inode
  [GFS2] remove gfs2_dev_iops
  [GFS2] fix file_system_type leak on gfs2meta mount
  [GFS2] Allow bmap to allocate extents
  [GFS2] Fix a page lock / glock deadlock
  [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops
  [GFS2] gfs2/ops_file.c should #include "ops_inode.h"
  [GFS2] be*_add_cpu conversion
  [GFS2] Fix bug where we called drop_bh incorrectly
  ...

TF_MASK is no longer defined, use X86_EFLAGS_TF.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>