- 11 3月, 2011 3 次提交
-
-
由 Ricardo Labiaga 提交于
Fix bug where we currently retry the EXCHANGEID call again, eventhough we already have a valid clientid. Instead, delay and retry the CREATE_SESSION call. Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jovi Zhang 提交于
this commit fix compilation warning as following: linux-2.6/fs/nfs/nfs4proc.c:3265: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NJovi Zhang <bookjovi@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Although they run as rpciod background tasks, under normal operation (i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck() and nfs4_do_close() want to be fully synchronous. This means that when we exit, we want all references to the rpc_task to be gone, and we want any dentry references etc. held by that task to be released. For this reason these functions call __rpc_wait_for_completion_task(), followed by rpc_put_task() in the expectation that the latter will be releasing the last reference to the rpc_task, and thus ensuring that the callback_ops->rpc_release() has been called synchronously. This patch fixes a race which exists due to the fact that rpciod calls rpc_complete_task() (in order to wake up the callers of __rpc_wait_for_completion_task()) and then subsequently calls rpc_put_task() without ensuring that these two steps are done atomically. In order to avoid adding new spin locks, the patch uses the existing waitqueue spin lock to order the rpc_task reference count releases between the waiting process and rpciod. The common case where nobody is waiting for completion is optimised for by checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task reference count is 1: in those cases we drop trying to grab the spin lock, and immediately free up the rpc_task. Those few processes that need to put the rpc_task from inside an asynchronous context and that do not care about ordering are given a new helper: rpc_put_task_async(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 3月, 2011 1 次提交
-
-
由 Neil Horman 提交于
The "bad_page()" page allocator sanity check was reported recently (call chain as follows): bad_page+0x69/0x91 free_hot_cold_page+0x81/0x144 skb_release_data+0x5f/0x98 __kfree_skb+0x11/0x1a tcp_ack+0x6a3/0x1868 tcp_rcv_established+0x7a6/0x8b9 tcp_v4_do_rcv+0x2a/0x2fa tcp_v4_rcv+0x9a2/0x9f6 do_timer+0x2df/0x52c ip_local_deliver+0x19d/0x263 ip_rcv+0x539/0x57c netif_receive_skb+0x470/0x49f :virtio_net:virtnet_poll+0x46b/0x5c5 net_rx_action+0xac/0x1b3 __do_softirq+0x89/0x133 call_softirq+0x1c/0x28 do_softirq+0x2c/0x7d do_IRQ+0xec/0xf5 default_idle+0x0/0x50 ret_from_intr+0x0/0xa default_idle+0x29/0x50 cpu_idle+0x95/0xb8 start_kernel+0x220/0x225 _sinittext+0x22f/0x236 It occurs because an skb with a fraglist was freed from the tcp retransmit queue when it was acked, but a page on that fraglist had PG_Slab set (indicating it was allocated from the Slab allocator (which means the free path above can't safely free it via put_page. We tracked this back to an nfsv4 setacl operation, in which the nfs code attempted to fill convert the passed in buffer to an array of pages in __nfs4_proc_set_acl, which gets used by the skb->frags list in xs_sendpages. __nfs4_proc_set_acl just converts each page in the buffer to a page struct via virt_to_page, but the vfs allocates the buffer via kmalloc, meaning the PG_slab bit is set. We can't create a buffer with kmalloc and free it later in the tcp ack path with put_page, so we need to either: 1) ensure that when we create the list of pages, no page struct has PG_Slab set or 2) not use a page list to send this data Given that these buffers can be multiple pages and arbitrarily sized, I think (1) is the right way to go. I've written the below patch to allocate a page from the buddy allocator directly and copy the data over to it. This ensures that we have a put_page free-able page for every entry that winds up on an skb frag list, so it can be safely freed when the frame is acked. We do a put page on each entry after the rpc_call_sync call so as to drop our own reference count to the page, leaving only the ref count taken by tcp_sendpages. This way the data will be properly freed when the ack comes in Successfully tested by myself to solve the above oops. Note, as this is the result of a setacl operation that exceeded a page of data, I think this amounts to a local DOS triggerable by an uprivlidged user, so I'm CCing security on this as well. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Trond Myklebust <Trond.Myklebust@netapp.com> CC: security@kernel.org CC: Jeff Layton <jlayton@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2011 1 次提交
-
-
由 Andy Adamson 提交于
As stated in section 2.4 of RFC 5661, subsequent instances of the client need to present the same co_ownerid. Concatinate the client's IP dot address, host name, and the rpc_auth pseudoflavor to form the co_ownerid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 1月, 2011 1 次提交
-
-
由 Andy Adamson 提交于
Indicate support for referrals. Do not set any PNFS roles. Check the flags returned by the server for validity. Do not use exchange flags from an old client ID instance when recovering a client ID. Update the EXCHID4_FLAG_XXX set to RFC 5661. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 1月, 2011 7 次提交
-
-
由 Trond Myklebust 提交于
In order to enable migration support, we will want to move some of the structures that are subject to migration into the struct nfs_server. In particular, if we are to move the state_owner and state_owner_id to being a per-filesystem structure, then we should label the resulting open/lock owners with a per-filesytem label to ensure global uniqueness. This patch does so by adding the super block s_dev to the open/lock owner name. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
A layout can request return-on-close. How this interacts with the forgetful model of never sending LAYOUTRETURNS is a bit ambiguous. We forget any layouts marked roc, and wait for them to be completely forgotten before continuing with the close. In addition, to compensate for races with any inflight LAYOUTGETs, and the fact that we do not get any layout stateid back from the server, we set the barrier to the worst case scenario of current_seqid + number of outstanding LAYOUTGETS. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs using the previous stateid are completed. This requires choosing the stateid to encode earlier, so we can abort if one is not available (we want to use the open stateid, but a LAYOUTGET is already out using it), and adding a count of the number of outstanding rpc calls using layout state (which for now consist solely of LAYOUTGETs). Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
No functional changes, just some code minor code rearrangement and comments. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Currently session draining only drains the fore channel. The back channel processing must also be drained. Use the back channel highest_slot_used to indicate that a callback is being processed by the callback thread. Move the session complete to be per channel. When the session is draininig, wait for any current back channel processing to complete and stop all new back channel processing by returning NFS4ERR_DELAY to the back channel client. Drain the back channel, then the fore channel. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Use the small id to pointer translator service to provide a unique callback identifier per SETCLIENTID call used to identify the v4.0 callback service associated with the clientid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 1月, 2011 2 次提交
-
-
由 Aneesh Kumar K.V 提交于
This patch make nfsv4 use the generic xattr handling code to get the nfsv4 acl. This will help us to add richacl support to nfsv4 in later patches Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Aneesh Kumar K.V 提交于
We want to skip VFS applying mode for NFS. So set MS_POSIXACL always and selectively use umask. Ideally we would want to use umask only when we don't have inheritable ACEs set. But NFS currently don't allow to send umask to the server. So this is best what we can do and this is consistent with NFSv3 Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 22 12月, 2010 2 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Note that cl_lease_time is in jiffies. This can cause a very long wait in the NFS4ERR_CLID_INUSE case. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 12月, 2010 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
An update of mode bits can result in ACL value being changed. We need to mark the acl cache invalid when we update mode. Similarly we need to update file attribute when we change ACL value Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 11月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 10月, 2010 1 次提交
-
-
由 Geert Uytterhoeven 提交于
On m68k, which is 32-bit: fs/nfs/nfs4proc.c: In function ‘nfs41_sequence_done’: fs/nfs/nfs4proc.c:432: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘int’ fs/nfs/nfs4proc.c: In function ‘nfs4_setup_sequence’: fs/nfs/nfs4proc.c:576: warning: format ‘%ld’ expects type ‘long int’, but argument 5 has type ‘int’ On 32-bit, ptrdiff_t is int; on 64-bit, ptrdiff_t is long. Introduced by commit dfb4f309 ("NFSv4.1: keep seq_res.sr_slot as pointer rather than an index") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 10月, 2010 1 次提交
-
-
由 J. Bruce Fields 提交于
The sanity checks here are incorrect; in the worst case they allow values that crash the client. They're also over-reliant on the preprocessor. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 10月, 2010 3 次提交
-
-
由 Andy Adamson 提交于
Add the ability to actually send LAYOUTGET and GETDEVICEINFO. This also adds in the machinery to handle layout state and the deviceid cache. Note that GETDEVICEINFO is not called directly by the generic layer. Instead it is called by the drivers while parsing the LAYOUTGET opaque data in response to an unknown device id embedded therein. RFC 5661 only encodes device ids within the driver-specific opaque data. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NDean Hildebrand <dhildebz@umich.edu> Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com> Signed-off-by: NMike Sager <sager@netapp.com> Signed-off-by: NRicardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
This information will be used to determine which layout driver, if any, to use for subsequent IO on this filesystem. Each driver is assigned an integer id, with 0 reserved to indicate no driver. The server can in theory return multiple ids. However, our current client implementation only notes the first entry and ignores the rest. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ricardo Labiaga 提交于
Used by the client to determine if the server has a granular enough time stamp. Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 10月, 2010 3 次提交
-
-
由 Bryan Schumaker 提交于
By requsting more attributes during a readdir, we can mimic the readdir plus operation that was in NFSv3. To test, I ran the command `ls -lU --color=none` on directories with various numbers of files. Without readdir plus, I see this: n files | 100 | 1,000 | 10,000 | 100,000 | 1,000,000 --------+-----------+-----------+-----------+-----------+---------- real | 0m00.153s | 0m00.589s | 0m05.601s | 0m56.691s | 9m59.128s user | 0m00.007s | 0m00.007s | 0m00.077s | 0m00.703s | 0m06.800s sys | 0m00.010s | 0m00.070s | 0m00.633s | 0m06.423s | 1m10.005s access | 3 | 1 | 1 | 4 | 31 getattr | 2 | 1 | 1 | 1 | 1 lookup | 104 | 1,003 | 10,003 | 100,003 | 1,000,003 readdir | 2 | 16 | 158 | 1,575 | 15,749 total | 111 | 1,021 | 10,163 | 101,583 | 1,015,784 With readdir plus enabled, I see this: n files | 100 | 1,000 | 10,000 | 100,000 | 1,000,000 --------+-----------+-----------+-----------+-----------+---------- real | 0m00.115s | 0m00.206s | 0m01.079s | 0m12.521s | 2m07.528s user | 0m00.003s | 0m00.003s | 0m00.040s | 0m00.290s | 0m03.296s sys | 0m00.007s | 0m00.020s | 0m00.120s | 0m01.357s | 0m17.556s access | 3 | 1 | 1 | 1 | 7 getattr | 2 | 1 | 1 | 1 | 1 lookup | 4 | 3 | 3 | 3 | 3 readdir | 6 | 62 | 630 | 6,300 | 62,993 total | 15 | 67 | 635 | 6,305 | 63,004 Readdir plus disabled has about a 16x increase in the number of rpc calls and is 4 - 5 times slower on large directories. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
We can use vmapped pages to read more information from the network at once. This will reduce the number of calls needed to complete a readdir. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> [trondmy: Added #include for linux/vmalloc.h> in fs/nfs/dir.c] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Otherwise, we cannot recover state correctly. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 10月, 2010 2 次提交
-
-
由 Trond Myklebust 提交于
In the case of a server reboot, the state recovery thread starts by calling nfs4_state_end_reclaim_reboot() in order to avoid edge conditions when the server reboots while the client is in the middle of recovery. However, if the client has already marked the nfs4_state as requiring reboot recovery, then the above behaviour will cause the recovery thread to treat the open as if it was part of such an edge condition: the open will be recovered as if it was part of a lease expiration (and all the locks will be lost). Fix is to remove the call to nfs4_state_mark_reclaim_reboot from nfs4_async_handle_error(), and nfs4_handle_exception(). Instead we leave it to the recovery thread to do this for us. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
由 Trond Myklebust 提交于
NFSv4 open recovery is currently broken: since we do not clear the state->flags states before attempting recovery, we end up with the 'can_open_cached()' function triggering. This again leads to no OPEN call being put on the wire. Reported-by: NSachin Prabhu <sprabhu@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
- 24 9月, 2010 1 次提交
-
-
由 Benny Halevy 提交于
Having to explicitly initialize sr_slotid to NFS4_MAX_SLOT_TABLE resulted in numerous bugs. Keeping the current slot as a pointer to the slot table is more straight forward and robust as it's implicitly set up to NULL wherever the seq_res member is initialized to zeroes. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 22 9月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
This fixes an Oopsable condition that was introduced by commit d3d4152a (nfs: make sillyrename an async operation) Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 9月, 2010 3 次提交
-
-
由 Jeff Layton 提交于
A synchronous rename can be interrupted by a SIGKILL. If that happens during a sillyrename operation, it's possible for the rename call to be sent to the server, but the task exits before processing the reply. If this happens, the sillyrenamed file won't get cleaned up during nfs_dentry_iput and the server is left with a dangling .nfs* file hanging around. Fix this problem by turning sillyrename into an asynchronous operation and have the task doing the sillyrename just wait on the reply. If the task is killed before the sillyrename completes, it'll still proceed to completion. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Right now, v3 and v4 have their own variants. Create a standard struct that will work for v3 and v4. v2 doesn't get anything but a simple error and so isn't affected by this. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Each NFS version has its own version of the rename args container. Standardize them on a common one that's identical to the one NFSv4 uses. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 9月, 2010 6 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Remove all remaining references to the struct nameidata from the low level NFS layers. Again pass down a partially initialised struct nfs_open_context when we want to do atomic open+create. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Remove references to 'struct nameidata' from the low-level open_revalidate code, and replace them with a struct nfs_open_context which will be correctly initialised upon success. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Start moving the 'struct nameidata' dependent code out of the lower level NFS code in preparation for the removal of open intents. Instead of the struct nameidata, we pass down a partially initialised struct nfs_open_context that will be fully initialised by the atomic open upon success. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-