In these drivers, scsi_remove_host() is called too late, at the point
it is called, the driver has already shut down too far to accept any
I/O that the shutdown might generate.  Any generated I/O actually
triggers a panic.

Fix this by calling scsi_remove_host() as early as possible and not
calling scsi_host_put() until just before we kfree the ahc_softc.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch moves aic7xxx over to the dma_get_required_mask() API and
dumps its open coded memory check.

It also appears from this bug:

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=167049

That 39 bit addressing doesn't work on older cards.  I surmise that the
AHC_LARGE_SCBS flag is the one that marks cards capable of using 39 bit
addressing, so I also folded that check into the code.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

#include of C files and macro tricks to rename symbols are evil and just
cause trouble.  Let's doublicate the two functions as they're going to
go away soon enough anyway.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

There's a spurious (and illegal since it's marked __exit) call to
ahc_linux_exit() in ahc_linux_init() which causes a double list
deletion of the transport class; remove it.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

I ran into this one sending bus resets across the hardware.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch upports all relevant code fixes and bumps the driver version
to 7.0 to signify starting a new tree.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Several people noticed we dropped quite a bit on benchmark figures.
OK, it was my fault but unfortunately I discovered I ran out of brown
paper bags a while ago and forgot to reorder them.

The issue is that a construct introduced in the conversion of the
driver to use the transport class keyed off whether the block request
was tagged or not.  However, the aic7xxx driver doesn't properly set
up the block layer TCQ (it uses the wrong API), so the driver now
things all requests are untagged and we keep it to a queue depth of a
single element.  Oops.

The fix is to use the correct TCQ API.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The aic7xxx can support Data Group transfers at periods > 12.5, so
eliminate that restriction.  Additionally wide is a requirement for DT
so ensure wide is set if users request DT.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Basically DT isn't reported or handled at all.  The problem is that
lines of code like this:

spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ;

don't do what you think they do when spi_dt is a single bit variable.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

now that we do normal PCI probing there's no need to keep a list of
all HBAs.

Rejections fixed up and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

always probe in bus order, avoid any reordering
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Apparently these are the only drives that try to negotiate IU and QAS
at u160 speeds.  The aic7xxx driver can't cope with this.  The fix is
to eliminate the IU and QAS setting routines.  I've #if 0'd them out,
just in case we ever get the sequencer documentation out of Adaptec,
since we'd then be able to fix the driver.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Following the go around over the SONY DVD that needs artificial limits,
this should be the correct code for all cases (minus the debugging
prints).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

 - the eisa layer only probes when it's actually safe, no need for
   a driver option
 - store the id table directly in linux format instead of convering
   at runtime
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

especially the now dead scsi_cmnd overlay
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

For setting coupled parameters, we need to be comparing against the goal
settings, not the current ones.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Since the aic driver is now taught to speak in terms of the generic
linux devices, we can now also dispense with the transport class get
routines (since we update the parameters when the driver sees they
change) and also plumb it into the spi transport transfer agreement
reporting infrastructure.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix a c99ism.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The new period/dt setting routines don't get the coupling of these
parameters correct.  This means that Domain Validation never gets DT
set, and thus the drive gets restricted to U80.

Fix this by restoring the couplings in the set routines.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Tampering with the settings has to be done under the host lock ...
slave_alloc isn't called under any lock, so this has to be done
explicitly.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The allocation of all of our components should be done in slave alloc.
Currently it's rather fancifully refcounted in the queuecommand
callback.  This patch moves allocation and destroy to their correct
places in slave_alloc/slave_destory.  Now we can guarantee that
everywhere a device is requested, it's actually been allocated, so don't
check for this anymore.

Additionally, the per device busy timer was the only source of potential
use after free.  It's been deleted because Linux does the correct thing
with busy returns, so there's no need to implement a separate timer in
the driver.

Finally, implement code that forces all the device parameters to zero
(i.e. async and narrow) in the slave alloc, inform the spi class of the
bios recorded maximums and wait until slave configure before trying
anything more adventurous.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This should finish the spurious queue removal from aic7xxx (there are
other queues that are probably unnecessary, but at least the major and
obviously unnecessary ones are done with).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This was rendered obsolete by the busyq removal; remove some of the last
remnants of its presence.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

pci_alloc_consistent is under 4G by default.  Also simplify the
definition of bus_dmamap_t.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

There's not much sense in sharing code anymore now that aic7xxx uses
various transport class facilities.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The aic7xxx driver has two spurious queues in it's linux glue code: the
busyq which queues incoming commands to the driver and the completeq
which queues finished commands before sending them back to the mid-layer

This patch just removes the busyq and makes the aic finally return the
correct status to get the mid-layer to manage its queueing, so a command
is either committed to the sequencer or returned to the midlayer for
requeue.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This is similar to the previous sym2 problem.  For Domain Validation to
work we can't allow any period setting to turn wide on if it was
previously off.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

My version of gcc doesn't warn about this error (declaration in the
middle of a set of statements).

The fix is simple (this also corrects return code; for init functions it
should be zero or error). 

Now that we export all the parameters, this is easy to do.
It also means that we can dump about 2000 lines of code that
were dedicated to doing this internally.

Additionally, this removes all the aic7xxx driver abuse
of SCSI timers which were embedded in the DV routines.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This is just a simplistic patch to export all of the
aic7xxx internal transport parameters via the SPI
transport class.  It doesn't actually alter the way the
driver works at all.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.

Arjan noticed there's some hunk in here that shouldn't.  Updated patch
below:
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!