- 13 12月, 2016 21 次提交
-
-
由 Yan, Zheng 提交于
When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
For readahead/fadvise cases, caller of ceph_readpages does not hold buffer capability. Pages can be added to page cache while there is no buffer capability. This can cause data integrity issue. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Nikolay Borisov 提交于
try_get_cap_refs can be used as a condition in a wait_event* calls. This is all fine until it has to call __ceph_do_pending_vmtruncate, which in turn acquires the i_truncate_mutex. This leads to a situation in which a task's state is !TASK_RUNNING and at the same time it's trying to acquire a sleeping primitive. In essence a nested sleeping primitives are being used. This causes the following warning: WARNING: CPU: 22 PID: 11064 at kernel/sched/core.c:7631 __might_sleep+0x9f/0xb0() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8109447d>] prepare_to_wait_event+0x5d/0x110 ipmi_msghandler tcp_scalable ib_qib dca ib_mad ib_core ib_addr ipv6 CPU: 22 PID: 11064 Comm: fs_checker.pl Tainted: G O 4.4.20-clouder2 #6 Hardware name: Supermicro X10DRi/X10DRi, BIOS 1.1a 10/16/2015 0000000000000000 ffff8838b416fa88 ffffffff812f4409 ffff8838b416fad0 ffffffff81a034f2 ffff8838b416fac0 ffffffff81052b46 ffffffff81a0432c 0000000000000061 0000000000000000 0000000000000000 ffff88167bda54a0 Call Trace: [<ffffffff812f4409>] dump_stack+0x67/0x9e [<ffffffff81052b46>] warn_slowpath_common+0x86/0xc0 [<ffffffff81052bcc>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8109447d>] ? prepare_to_wait_event+0x5d/0x110 [<ffffffff8109447d>] ? prepare_to_wait_event+0x5d/0x110 [<ffffffff8107767f>] __might_sleep+0x9f/0xb0 [<ffffffff81612d30>] mutex_lock+0x20/0x40 [<ffffffffa04eea14>] __ceph_do_pending_vmtruncate+0x44/0x1a0 [ceph] [<ffffffffa04fa692>] try_get_cap_refs+0xa2/0x320 [ceph] [<ffffffffa04fd6f5>] ceph_get_caps+0x255/0x2b0 [ceph] [<ffffffff81094370>] ? wait_woken+0xb0/0xb0 [<ffffffffa04f2c11>] ceph_write_iter+0x2b1/0xde0 [ceph] [<ffffffff81613f22>] ? schedule_timeout+0x202/0x260 [<ffffffff8117f01a>] ? kmem_cache_free+0x1ea/0x200 [<ffffffff811b46ce>] ? iput+0x9e/0x230 [<ffffffff81077632>] ? __might_sleep+0x52/0xb0 [<ffffffff81156147>] ? __might_fault+0x37/0x40 [<ffffffff8119e123>] ? cp_new_stat+0x153/0x170 [<ffffffff81198cfa>] __vfs_write+0xaa/0xe0 [<ffffffff81199369>] vfs_write+0xa9/0x190 [<ffffffff811b6d01>] ? set_close_on_exec+0x31/0x70 [<ffffffff8119a056>] SyS_write+0x46/0xa0 This happens since wait_event_interruptible can interfere with the mutex locking code, since they both fiddle with the task state. Fix the issue by using the newly-added nested blocking infrastructure in 61ada528 ("sched/wait: Provide infrastructure to deal with nested blocking") Link: https://lwn.net/Articles/628628/Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Zhi Zhang 提交于
Fix printing wrong return variable for invalidate_inode_pages2_range in ceph_direct_read_write(). Signed-off-by: NZhi Zhang <zhang.david2011@gmail.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Tobias Klauser 提交于
Include linux/crush/mapper.h in crush/mapper.c to get the prototypes of crush_find_rule and crush_do_rule which are defined there. This fixes the following GCC warnings when building with 'W=1': net/ceph/crush/mapper.c:40:5: warning: no previous prototype for ‘crush_find_rule’ [-Wmissing-prototypes] net/ceph/crush/mapper.c:793:5: warning: no previous prototype for ‘crush_do_rule’ [-Wmissing-prototypes] Signed-off-by: NTobias Klauser <tklauser@distanz.ch> [idryomov@gmail.com: corresponding !__KERNEL__ include] Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
drivers/block/rbd.c: In function ‘rbd_watch_cb’: drivers/block/rbd.c:3690:5: error: ‘struct_v’ may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/block/rbd.c:3759:5: note: ‘struct_v’ was declared here Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
->get_authorizer(), ->verify_authorizer_reply(), ->sign_message() and ->check_message_signature() shouldn't be doing anything with or on the connection (like closing it or sending messages). Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
The length of the reply is protocol-dependent - for cephx it's ceph_x_authorize_reply. Nothing sensible can be passed from the messenger layer anyway. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b), the client gets back a ceph_x_authorize_reply, which it is supposed to verify to ensure the authenticity and protect against replay attacks. The code for doing this is there (ceph_x_verify_authorizer_reply(), ceph_auth_verify_authorizer_reply() + plumbing), but it is never invoked by the the messenger. AFAICT this goes back to 2009, when ceph authentication protocols support was added to the kernel client in 4e7a5dcd ("ceph: negotiate authentication protocol; implement AUTH_NONE protocol"). The second param of ceph_connection_operations::verify_authorizer_reply is unused all the way down. Pass 0 to facilitate backporting, and kill it in the next commit. Cc: stable@vger.kernel.org Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
It's called during inital setup, when everything should be allocated with GFP_KERNEL. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
This is useless and more importantly not allowed on the writeback path, because crypto_alloc_skcipher() allocates memory with GFP_KERNEL, which can recurse back into the filesystem: kworker/9:3 D ffff92303f318180 0 20732 2 0x00000080 Workqueue: ceph-msgr ceph_con_workfn [libceph] ffff923035dd4480 ffff923038f8a0c0 0000000000000001 000000009eb27318 ffff92269eb28000 ffff92269eb27338 ffff923036b145ac ffff923035dd4480 00000000ffffffff ffff923036b145b0 ffffffff951eb4e1 ffff923036b145a8 Call Trace: [<ffffffff951eb4e1>] ? schedule+0x31/0x80 [<ffffffff951eb77a>] ? schedule_preempt_disabled+0xa/0x10 [<ffffffff951ed1f4>] ? __mutex_lock_slowpath+0xb4/0x130 [<ffffffff951ed28b>] ? mutex_lock+0x1b/0x30 [<ffffffffc0a974b3>] ? xfs_reclaim_inodes_ag+0x233/0x2d0 [xfs] [<ffffffff94d92ba5>] ? move_active_pages_to_lru+0x125/0x270 [<ffffffff94f2b985>] ? radix_tree_gang_lookup_tag+0xc5/0x1c0 [<ffffffff94dad0f3>] ? __list_lru_walk_one.isra.3+0x33/0x120 [<ffffffffc0a98331>] ? xfs_reclaim_inodes_nr+0x31/0x40 [xfs] [<ffffffff94e05bfe>] ? super_cache_scan+0x17e/0x190 [<ffffffff94d919f3>] ? shrink_slab.part.38+0x1e3/0x3d0 [<ffffffff94d9616a>] ? shrink_node+0x10a/0x320 [<ffffffff94d96474>] ? do_try_to_free_pages+0xf4/0x350 [<ffffffff94d967ba>] ? try_to_free_pages+0xea/0x1b0 [<ffffffff94d863bd>] ? __alloc_pages_nodemask+0x61d/0xe60 [<ffffffff94ddf42d>] ? cache_grow_begin+0x9d/0x560 [<ffffffff94ddfb88>] ? fallback_alloc+0x148/0x1c0 [<ffffffff94ed84e7>] ? __crypto_alloc_tfm+0x37/0x130 [<ffffffff94de09db>] ? __kmalloc+0x1eb/0x580 [<ffffffffc09fe2db>] ? crush_choose_firstn+0x3eb/0x470 [libceph] [<ffffffff94ed84e7>] ? __crypto_alloc_tfm+0x37/0x130 [<ffffffff94ed9c19>] ? crypto_spawn_tfm+0x39/0x60 [<ffffffffc08b30a3>] ? crypto_cbc_init_tfm+0x23/0x40 [cbc] [<ffffffff94ed857c>] ? __crypto_alloc_tfm+0xcc/0x130 [<ffffffff94edcc23>] ? crypto_skcipher_init_tfm+0x113/0x180 [<ffffffff94ed7cc3>] ? crypto_create_tfm+0x43/0xb0 [<ffffffff94ed83b0>] ? crypto_larval_lookup+0x150/0x150 [<ffffffff94ed7da2>] ? crypto_alloc_tfm+0x72/0x120 [<ffffffffc0a01dd7>] ? ceph_aes_encrypt2+0x67/0x400 [libceph] [<ffffffffc09fd264>] ? ceph_pg_to_up_acting_osds+0x84/0x5b0 [libceph] [<ffffffff950d40a0>] ? release_sock+0x40/0x90 [<ffffffff95139f94>] ? tcp_recvmsg+0x4b4/0xae0 [<ffffffffc0a02714>] ? ceph_encrypt2+0x54/0xc0 [libceph] [<ffffffffc0a02b4d>] ? ceph_x_encrypt+0x5d/0x90 [libceph] [<ffffffffc0a02bdf>] ? calcu_signature+0x5f/0x90 [libceph] [<ffffffffc0a02ef5>] ? ceph_x_sign_message+0x35/0x50 [libceph] [<ffffffffc09e948c>] ? prepare_write_message_footer+0x5c/0xa0 [libceph] [<ffffffffc09ecd18>] ? ceph_con_workfn+0x2258/0x2dd0 [libceph] [<ffffffffc09e9903>] ? queue_con_delay+0x33/0xd0 [libceph] [<ffffffffc09f68ed>] ? __submit_request+0x20d/0x2f0 [libceph] [<ffffffffc09f6ef8>] ? ceph_osdc_start_request+0x28/0x30 [libceph] [<ffffffffc0b52603>] ? rbd_queue_workfn+0x2f3/0x350 [rbd] [<ffffffff94c94ec0>] ? process_one_work+0x160/0x410 [<ffffffff94c951bd>] ? worker_thread+0x4d/0x480 [<ffffffff94c95170>] ? process_one_work+0x410/0x410 [<ffffffff94c9af8d>] ? kthread+0xcd/0xf0 [<ffffffff951efb2f>] ? ret_from_fork+0x1f/0x40 [<ffffffff94c9aec0>] ? kthread_create_on_node+0x190/0x190 Allocating the cipher along with the key fixes the issue - as long the key doesn't change, a single cipher context can be used concurrently in multiple requests. We still can't take that GFP_KERNEL allocation though. Both ceph_crypto_key_clone() and ceph_crypto_key_decode() are called from GFP_NOFS context, so resort to memalloc_noio_{save,restore}() here. Reported-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
- replace an ad-hoc array with a struct - rename to calc_signature() for consistency Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
It's going to be used as a temporary buffer for in-place en/decryption with ceph_crypt() instead of on-stack buffers, so rename to enc_buf. Ensure alignment to avoid GFP_ATOMIC allocations in the crypto stack. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Starting with 4.9, kernel stacks may be vmalloced and therefore not guaranteed to be physically contiguous; the new CONFIG_VMAP_STACK option is enabled by default on x86. This makes it invalid to use on-stack buffers with the crypto scatterlist API, as sg_set_buf() expects a logical address and won't work with vmalloced addresses. There isn't a different (e.g. kvec-based) crypto API we could switch net/ceph/crypto.c to and the current scatterlist.h API isn't getting updated to accommodate this use case. Allocating a new header and padding for each operation is a non-starter, so do the en/decryption in-place on a single pre-assembled (header + data + padding) heap buffer. This is explicitly supported by the crypto API: "... the caller may provide the same scatter/gather list for the plaintext and cipher text. After the completion of the cipher operation, the plaintext data is replaced with the ciphertext data in case of an encryption and vice versa for a decryption." Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Since commit 0a990e70 ("ceph: clean up service ticket decoding"), th->session_key isn't assigned until everything is decoded. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
Pass what's going to be encrypted - that's msg_b, not ticket_blob. ceph_x_encrypt_buflen() returns the upper bound, so this doesn't change the maxlen calculation, but makes it a bit clearer. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
- 12 12月, 2016 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Two more MIPS fixes for 4.9: - RTC: Return -ENODEV so an external RTC will be tried - Fix mask of GPE frequency These two have been tested on Imagination's automated test system and also both received positive reviews on the linux-mips mailing list" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Lantiq: Fix mask of GPE frequency MIPS: Return -ENODEV from weak implementation of rtc_mips_set_time
-
- 11 12月, 2016 4 次提交
-
-
由 Hauke Mehrtens 提交于
The hardware documentation says bit 11:10 are used for the GPE frequency selection. Fix the mask in the define to match these bits. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NThomas Langer <thomas.langer@intel.com> Cc: linux-mips@linux-mips.org Cc: john@phrozen.org Patchwork: https://patchwork.linux-mips.org/patch/14648/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Luuk Paulussen 提交于
The sync_cmos_clock function in kernel/time/ntp.c first tries to update the internal clock of the cpu by calling the "update_persistent_clock64" architecture specific function. If this returns -ENODEV, it then tries to update an external RTC using "rtc_set_ntp_time". On the mips architecture, the weak implementation of the underlying function would return 0 if it wasn't overridden. This meant that the sync_cmos_clock function would never try to update an external RTC (if both CONFIG_GENERIC_CMOS_UPDATE and CONFIG_RTC_SYSTOHC are configured) Returning -ENODEV instead, means that an external RTC will be tried. Signed-off-by: NLuuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Reviewed-by: NRichard Laing <richard.laing@alliedtelesis.co.nz> Reviewed-by: NScott Parlane <scott.parlane@alliedtelesis.co.nz> Reviewed-by: NChris Packham <chris.packham@alliedtelesis.co.nz> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14649/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Fix pointer size when caam is used with AArch64 boot loader on AArch32 kernel. - Fix ahash state corruption in marvell driver. - Fix buggy algif_aed tag handling. - Prevent mcryptd from being used with incompatible algorithms which can cause crashes" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_aead - fix uninitialized variable warning crypto: mcryptd - Check mcryptd algorithm compatibility crypto: algif_aead - fix AEAD tag memory handling crypto: caam - fix pointer size for AArch64 boot loader, AArch32 kernel crypto: marvell - Don't corrupt state of an STD req for re-stepped ahash crypto: marvell - Don't copy hash operation twice into the SRAM
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Limit the number of can filters to avoid > MAX_ORDER allocations. Fix from Marc Kleine-Budde. 2) Limit GSO max size in netvsc driver to avoid problems with NVGRE configurations. From Stephen Hemminger. 3) Return proper error when memory allocation fails in ser_gigaset_init(), from Dan Carpenter. 4) Missing linkage undo in error paths of ipvlan_link_new(), from Gao Feng. 5) Missing necessayr SET_NETDEV_DEV in lantiq and cpmac drivers, from Florian Fainelli. 6) Handle probe deferral properly in smsc911x driver. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: mlx5: Fix Kconfig help text net: smsc911x: back out silently on probe deferrals ibmveth: set correct gso_size and gso_type net: ethernet: cpmac: Call SET_NETDEV_DEV() net: ethernet: lantiq_etop: Call SET_NETDEV_DEV() vhost-vsock: fix orphan connection reset cxgb4/cxgb4vf: Assign netdev->dev_port with port ID driver: ipvlan: Unlink the upper dev when ipvlan_link_new failed ser_gigaset: return -ENOMEM on error instead of success NET: usb: cdc_mbim: add quirk for supporting Telit LE922A can: peak: fix bad memory access and free sequence phy: Don't increment MDIO bus refcount unless it's a different owner netvsc: reduce maximum GSO size drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links can: raw: raw_setsockopt: limit number of can_filter that can be set
-
- 10 12月, 2016 10 次提交
-
-
由 Christopher Covington 提交于
Since the following commit, Infiniband and Ethernet have not been mutually exclusive. Fixes: 4aa17b28 mlx5: Enable mutual support for IB and Ethernet Signed-off-by: NChristopher Covington <cov@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Walleij 提交于
When trying to get a regulator we may get deferred and we see this noise: smsc911x 1b800000.ethernet-ebi2 (unnamed net_device) (uninitialized): couldn't get regulators -517 Then the driver continues anyway. Which means that the regulator may not be properly retrieved and reference counted, and may be switched off in case noone else is using it. Fix this by returning silently on deferred probe and let the system work it out. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
This patch is based on an earlier one submitted by Jon Maxwell with the following commit message: "We recently encountered a bug where a few customers using ibmveth on the same LPAR hit an issue where a TCP session hung when large receive was enabled. Closer analysis revealed that the session was stuck because the one side was advertising a zero window repeatedly. We narrowed this down to the fact the ibmveth driver did not set gso_size which is translated by TCP into the MSS later up the stack. The MSS is used to calculate the TCP window size and as that was abnormally large, it was calculating a zero window, even although the sockets receive buffer was completely empty." We rely on the Virtual I/O Server partition in a pseries environment to provide the MSS through the TCP header checksum field. The stipulation is that users should not disable checksum offloading if rx packet aggregation is enabled through VIOS. Some firmware offerings provide the MSS in the RX buffer. This is signalled by a bit in the RX queue descriptor. Reviewed-by: NBrian King <brking@linux.vnet.ibm.com> Reviewed-by: NPradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: NJonathan Maxwell <jmaxwell37@gmail.com> Reviewed-by: NDavid Dai <zdai@us.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "Several fixes to the DSM (ACPI device specific method) marshaling implementation. I consider these urgent enough to send for 4.9 consideration since they fix the kernel's handling of ARS (Address Range Scrub) commands. Especially for platforms without machine-check-recovery capabilities, successful execution of ARS commands enables the platform to potentially break out of an infinite reboot problem if a media error is present in the boot path. There is also a one line fix for a device-dax read-only mapping regression. Commits 9a901f54 ("acpi, nfit: fix extended status translations for ACPI DSMs") and 325896ff ("device-dax: fix private mapping restriction, permit read-only") are true regression fixes for changes introduced this cycle. Commit efda1b5d ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") fixes the kernel's handling of zero-length results, this never would have worked in the past, but we only just recently discovered a BIOS implementation that emits this arguably spec non-compliant result. The remaining two commits are additional fall out from thinking through the implications of a zero / truncated length result of the ARS Status command. In order to mitigate the risk that these changes introduce yet more regressions they are backstopped by a new unit test in commit a7de92da ("tools/testing/nvdimm: unit test acpi_nfit_ctl()") that mocks up inputs to acpi_nfit_ctl()" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix private mapping restriction, permit read-only tools/testing/nvdimm: unit test acpi_nfit_ctl() acpi, nfit: fix bus vs dimm confusion in xlat_status acpi, nfit: validate ars_status output buffer size acpi, nfit, libnvdimm: fix / harden ars_status output length handling acpi, nfit: fix extended status translations for ACPI DSMs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "This is quite late but SCT Write Same support added during this cycle is broken subtly but seriously and it'd be best to disable it before v4.9 gets released. This contains two commits - one low impact sata_mv fix and the mentioned disabling of SCT Write Same" * 'for-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata-scsi: disable SCT Write Same for the moment ata: sata_mv: check for errors when parsing nr-ports from dt
-
git://github.com/ceph/ceph-client由 Linus Torvalds 提交于
Pull ceph fix from Ilya Dryomov: "A fix for an issue with ->d_revalidate() in ceph, causing frequent kernel crashes. Marked for stable - it goes back to 4.6, but started popping up only in 4.8" * tag 'ceph-for-4.9-rc9' of git://github.com/ceph/ceph-client: ceph: don't set req->r_locked_dir in ceph_d_revalidate
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Final batch of SoC fixes A few fixes that have trickled in over the last week, all fixing minor errors in devicetrees -- UART pin assignment on Allwinner H3, correcting number of SATA ports on a Marvell-based Linkstation platform and a display clock fix for Freescale/NXP i.MX7D that fixes a freeze when starting up X" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: orion5x: fix number of sata port for linkstation ls-gl ARM: dts: imx7d: fix LCDIF clock assignment dts: sun8i-h3: correct UART3 pin definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k fixes from Geert Uytterhoeven: - build fix for drivers calling ndelay() in a conditional block without curly braces - defconfig updates * tag 'm68k-for-v4.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix ndelay() macro m68k/defconfig: Update defconfigs for v4.9-rc1
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fix from Dave Airlie: "Just a single fix for amdgpu to just suspend the gpu on 'shutdown' instead of shutting it down fully, as for some reason the hw was getting upset in some situations" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: just suspend the hw on pci shutdown
-
由 Linus Torvalds 提交于
This reverts commit 53855d10. It shouldn't have come in yet - it depends on the changes in linux-next that will come in during the next merge window. As Matthew Wilcox says, the test suite is broken with the current state without the revert. Requested-by: NMatthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 12月, 2016 3 次提交
-
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: ethernet: Make sure we set dev->dev.parent This patch series builds atop: ec988ad7 ("phy: Don't increment MDIO bus refcount unless it's a different owner") FMAN is the one that potentially needs patching as well (call SET_NETDEV_DEV), but there appears to be no way that init_phy is called right now, or there is not such an in-tree user. Madalin, can you comment on that? ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The TI CPMAC driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad7 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The Lantiq Etop driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad7 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-