Instead of abusing a buffer_head flag just add a variant of
sync_dirty_buffer which allows passing the exact type of write
flag required.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If nilfs_attach_checkpoint() gets a memory allocation failure during
creation of ifile, it will return without removing nilfs_sb_info
struct from ns_supers list.  When a concurrently mounted snapshot is
unmounted or another new snapshot is mounted after that, this causes
kernel oops as below:

> BUG: unable to handle kernel NULL pointer dereference at (null)
> IP: [<f83662ff>] nilfs_find_sbinfo+0x74/0xa4 [nilfs2]
> *pde = 00000000
> Oops: 0000 [#1] SMP
<snip>
> Call Trace:
>  [<f835dc29>] ? nilfs_get_sb+0x165/0x532 [nilfs2]
>  [<c1173c87>] ? ida_get_new_above+0x16d/0x187
>  [<c109a7f8>] ? alloc_vfsmnt+0x7e/0x10a
>  [<c1070790>] ? kstrdup+0x2c/0x40
>  [<c1089041>] ? vfs_kern_mount+0x96/0x14e
>  [<c108913d>] ? do_kern_mount+0x32/0xbd
>  [<c109b331>] ? do_mount+0x642/0x6a1
>  [<c101a415>] ? do_page_fault+0x0/0x2d1
>  [<c1099c00>] ? copy_mount_options+0x80/0xe2
>  [<c10705d8>] ? strndup_user+0x48/0x67
>  [<c109b3f1>] ? sys_mount+0x61/0x90
>  [<c10027cc>] ? sysenter_do_call+0x12/0x22

This fixes the problem.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org

[folded build fix from sfr]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This forces nilfs to check compatibility of feature flags so as to
reject a filesystem with unknown features when it mounts or remounts
the filesystem.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This removes nilfs_bmap_union and finally unifies three structures and
the union in bmap/btree code into one.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds is_remount argument to the parse_options() function that
obtains mount options from strings.

Previously, parse_options did not distinguish context whether it's
called for a new mount or remount, so the caller needed additional
verifications outside the function.

This allows parse_options to verify options and print messages
depending on the context.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This replaces seq_printf() with seq_puts() in nilfs_show_options for
mount options which have no argument.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Nilfs has "discard" mount option which issues discard/TRIM commands to
underlying block device, but it lacks a complementary option and has
no way to disable the feature through remount.

This adds "nodiscard" option to resolve this imbalance.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Nilfs enables write barriers by default and has "nobarrier" mount
option to disable this feature.  But it lacks the complementary option
and has no way to re-enable the feature on remount.

This adds "barrier" option to resolve this imbalance.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This will sync super blocks in turns instead of syncing duplicate
super blocks at the time.  This will help searching valid super root
when super block is written into disk before log is written, which is
happen when barrier-less block devices are unmounted uncleanly.  In
the situation, old super block likely points to valid log.

This patch introduces ns_sbwcount member to the nilfs object and adds
nilfs_sb_will_flip() function; ns_sbwcount counts how many times super
blocks write back to the disk.  And, nilfs_sb_will_flip() decides
whether flipping required or not based on the count of ns_sbwcount to
sync super blocks asymmetrically.

The following functions are also changed:

 - nilfs_prepare_super(): flips super blocks according to the
   argument.  The argument is calculated by nilfs_sb_will_flip()
   function.

 - nilfs_cleanup_super(): sets "clean" flag to both super blocks if
   they point to the same checkpoint.

To update both of super block information, caller of
nilfs_commit_super must set the information on both super blocks.
Signed-off-by: NJiro SEKIBA <jir@unicus.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This function checks validity of super block pointers.
If first super block is invalid, it will swap the super blocks.
The function should be called before any super block information updates.
Caller must obtain nilfs->ns_sem.
Signed-off-by: NJiro SEKIBA <jir@unicus.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This moves out section that updates information of the recent log
position stored in super blocks from nilfs_commit_super to a new
routine named nilfs_set_log_cursor.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This function marks error state and write it on super blocks.  This is
a preparation for making super block writeback alternately.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This function write out filesystem state to super blocks in order to
share the same cleanup work.  This is a preparation for making super
block writeback alternately.

Cc: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Mount time field in super block is wrongly updated when nilfs remounts
the partition from read-write to read-only.  This fixes the issue.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This gets rid of unwanted space chars in front of conditional
sentences of nilfs_destroy_cachep().
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Snapshots and regular ro/rw mounts are essentially-different within
the meaning whether the checkpoint is static or not and is marked with
a snapshot flag or not.

The current implemenation, however, allows to remount a snapshot to a
regular rw-mount if the checkpoint number equals the latest one.

This transition is actually impossible since changing a checkpoint to
a snapshot makes another checkpoint, thus the condition is never
satisfied.

This fixes the weird state of affairs, and specifically separates
snapshots and regular rw/ro-mounts.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

deactivate_super was replaced with deactivate_locked_super, but the
comment of nilfs_get_sb remain unchanged.  This renews the comment.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

MS_VERBOSE is deprecated.  This replaces it with MS_SILENT in
reference to get_sb_bdev function.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

An fmode_t argument is passed to kill_block_super() through s_mode
member of the super_block structure.  This is used to release the
block device with the same mode, however, nilfs does not set s_mode
anywhere.

This modifies nilfs_get_sb function to properly initialize the s_mode
member.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The second argument of open_bdev_exclusive/close_bdev_exclusive takes
fmode_t flags instead of mount flags.  This fixes the misuse.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds missing endian conversions in comparision of the magic
number of super blocks.  It was coincidence that prior versions didn't
incur problems; the upper byte of the magic number happened to be
equal to the lower byte.  But, semantically it's wrong to depend on
this.

This won't change anything else nor suffer any compatibility issues.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Printing a message after loading a file system is a practice. Add this to
provide a better user-friendly experience.
Signed-off-by: NLi Hong <lihong.hi@gmail.com>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This cleanup patch gives several improvements:

 - Moving all kmem_cache_{create_destroy} calls into one place, which removes
 some small function calls, cleans up error check code and clarify the logic.

 - Mark all initial code in __init section.

 - Remove some very obvious comments.

 - Adjust some declarations.

 - Fix some space-tab issues.
Signed-off-by: NLi Hong <lihong.hi@gmail.com>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Like ext3, nilfs has 'errors' mount option to allow specifying desired
behavior on severe errors.

Currently, the default action is 'errors=continue' and has potential
to advance filesystem corruption for severe errors.

This will change the action to 'errors=remount-ro' to avoid the issue.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set.
And nilfs does not set s_bdi anywhere.  I noticed this problem by the
warning introduced by the recent commit 5129a469 ("Catch filesystem
lacking s_bdi").

 WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e()
 Hardware name: PowerEdge 2850
 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas
 Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38
 Call Trace:
  [<c1028422>] warn_slowpath_common+0x60/0x90
  [<c102845f>] warn_slowpath_null+0xd/0x10
  [<c1095936>] vfs_kern_mount+0xc5/0x14e
  [<c1095a03>] do_kern_mount+0x32/0xbd
  [<c10a811e>] do_mount+0x671/0x6d0
  [<c1073794>] ? __get_free_pages+0x1f/0x21
  [<c10a684f>] ? copy_mount_options+0x2b/0xe2
  [<c107b634>] ? strndup_user+0x48/0x67
  [<c10a81de>] sys_mount+0x61/0x8f
  [<c100280c>] sysenter_do_call+0x12/0x32

This ensures to set s_bdi for nilfs and fixes the sync silent failure.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This kills the following checkpatch warnings:

 WARNING: unnecessary whitespace before a quoted newline
 #869: FILE: super.c:869:
 +     	           "remount to a different snapshot. \n",

 WARNING: unnecessary whitespace before a quoted newline
 #389: FILE: the_nilfs.c:389:
 +     	    printk(KERN_ERR "NILFS: too short segment. \n");
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This fixes various typos I found in comments of nilfs2.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This replaces s_dirt flag use in nilfs with a new flag added on the
nilfs object.  The s_dirt flag was used to indicate if
sop->write_super() should be called, however the current version of
nilfs does not use the callback.  Thus, it can be replaced with the
own flag.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>

nilfs_error() calls nilfs_detach_segment_constructor() if
errors=remount-ro option is specified, and this may lead to a hang due
to recursive locking of, for instance, nilfs->ns_segctor_sem and
others.

In this case, detaching segment constructor is not necessary because
read-only flag is set to the filesystem and further writes are
blocked.

This fixes the potential hang issue by removing the
nilfs_detach_segment_constructor() call from nilfs_error.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds a function to send discard requests for given array of
segment numbers, and calls the function when garbage collection
succeeded.
Signed-off-by: NJiro SEKIBA <jir@unicus.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This adds "norecovery" mount option which disables temporal write
access to read-only mounts or snapshots during mount/recovery.
Without this option, write access will be even performed for those
types of mounts; the temporal write access is needed to mount root
file system read-only after an unclean shutdown.

This option will be helpful when user wants to prevent any write
access to the device.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Eric Sandeen <sandeen@redhat.com>

Although mount recovery of nilfs is integrated in load_nilfs()
procedure, the completion of recovery was isolated from the procedure
and performed at the end of the fill_super routine.

This was somewhat confusing since the recovery is needed for the nilfs
object, not for a super block instance.

To resolve the inconsistency, this will integrate the recovery
completion into load_nilfs().
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This will hide a function call of nilfs_mdt_clear() in
nilfs_mdt_destroy().

This ensures nilfs_mdt_destroy() to do cleanup jobs included in
nilfs_mdt_clear().
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This will displace nilfs_mdt_new() constructor with individual
metadata file constructors like nilfs_dat_new(), new_sufile_new(),
nilfs_cpfile_new(), and nilfs_ifile_new().

This makes it possible for each metadata file to have own
intialization code.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds an optional "object size" argument to nilfs_mdt_new_common()
function; the argument specifies the size of private object attached
to a newly allocated metadata file inode.

This will afford space to keep local variables for meta data files.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

match_bool function is not used anymore.
Signed-off-by: NJiro SEKIBA <jir@unicus.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Since most of fs using nofoobar style option,
modified barrier=off option as nobarrier.
Signed-off-by: NJiro SEKIBA <jir@unicus.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>