- 21 12月, 2005 6 次提交
-
-
由 Knut Petersen 提交于
Whenever ywrap scrolling is selected together with 180 degree screen rotation, 2.6.15-rc6 and earlier versions are broken. fb_pan_display() expects non-negative yoffsets, but ud_update_start() calls it with yoffsets down to -(yres - font height). This patch transforms yoffset to the correct range 0 ... vyres-1. Some obviously unneeded parentheses are removed, too. Verified with cyblafb, should be applied before 2.6.15-final because it does fix the framebuffer rotation code introduced early in the 2.6.15 release cycle. Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
-
由 Antonino A. Daplas 提交于
Reported by: janis huang (Bugzilla Bug 5747) Fix on oops in intelfb. Not sure what's happening, looks like dinfo->name pointer is invalidated after initialization. Remove intelfb_get_fix, it's not needed and move the majority of the code to the initialization routine. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Fix intelfb trying to free a non-existent resource in its error path. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
The g5 thermal control for liquid cooled machines has a small bug, when the temperatures gets too high, it boosts all fans to the max, but incorrectly sets the liquids pump to the min instead of the max speed, thus causing the overtemp condition not to clear and the machine to shut down after a while. This fixes it to set the pumps to max speed instead. This problem might explain some of the reports of random shutdowns that some g5 users have been reporting in the past. Many thanks to Marcus Rothe for spending a lot of time trying various patches & sending log logs before I found out that typo. Note that overtemp handling is still not perfect and the machine might still shutdown, that patch should reduce if not eliminate such occcurences in "normal" conditions with high load. I'll implement a better handling with proper slowing down of the CPUs later. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 20 12月, 2005 28 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Edson Seabra 提交于
The CPM2 interrupt handler does not return success to the IRQ subsystem, which causes it to kill the IRQ line after 100,000 interrupts. Signed-off-by: NEdson Seabra <Edson.Seabra@cyclades.com> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Since we don't restore the volatile registers in the syscall exit path, we need to make sure we don't leak any potentially interesting values from the kernel to userspace. This was already the case for all except r11. This makes it use r11 for an MSR value, so r11 will have an (uninteresting) MSR value in it on return to userspace. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Trond Myklebust 提交于
When mixing -olock and -onolock mounts on the same client, we have to check that fl->fl_u.nfs_fl.owner is set before dereferencing it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
gss_create_upcall() should not error just because rpc.gssd closed the pipe on its end. Instead, it should requeue the pending requests and then retry. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure we call unmap_mapping_range() and sync dirty pages to disk before doing an NFS direct write. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If we get something like the following, [ 125.300636] [<c04086e1>] schedule_timeout+0x54/0xa5 [ 125.305931] [<c040866e>] io_schedule_timeout+0x29/0x33 [ 125.311495] [<c02880c4>] blk_congestion_wait+0x70/0x85 [ 125.317058] [<c014136b>] throttle_vm_writeout+0x69/0x7d [ 125.322720] [<c014714d>] shrink_zone+0xe0/0xfa [ 125.327560] [<c01471d4>] shrink_caches+0x6d/0x6f [ 125.332581] [<c01472a6>] try_to_free_pages+0xd0/0x1b5 [ 125.338056] [<c013fa4b>] __alloc_pages+0x135/0x2e8 [ 125.343258] [<c03b74ad>] tcp_sendmsg+0xaa0/0xb78 [ 125.348281] [<c03d4666>] inet_sendmsg+0x48/0x53 [ 125.353212] [<c0388716>] sock_sendmsg+0xb8/0xd3 [ 125.358147] [<c0388773>] kernel_sendmsg+0x42/0x4f [ 125.363259] [<c038bc00>] sock_no_sendpage+0x5e/0x77 [ 125.368556] [<c03ee7af>] xs_tcp_send_request+0x2af/0x375 then the socket is blocked until memory is reclaimed, and no progress can ever be made. Try to access the emergency pools by using GFP_ATOMIC. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Linus Torvalds 提交于
-
由 Neil Brown 提交于
I had thought that keeping the reported tail level clearly different from the module name was a good idea, but I've changed my mind. 'raid5' is better and probably less confusing than 'RAID-5'. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Collins 提交于
This is just a basic cleanup. No change in functionality. Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Michael Chan 提交于
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test. Overwriting memory in this region can cause ASF problems. Update version and release date. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The tw32_f() function (register write with immediate read flush) can hang when used on some registers to switch clock frequencies and power. A new tw32_wait_f() is added for such registers with the delay before the read and after the read. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add some missing workarounds in tg3_set_power_state(): 1. Workaround to prevent overdrawing current on 5714. 2. Do not power down 5700's PHY because of hw limitation. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Locate the pdev_peer for dual port 5714 NIC devices in addition to 5704 devices. The name is also changed to tg3_find_peer() from tg3_find_5704_peer(). It is also necessary to call netdev_priv() to get to the peer's private tg3 structure. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
On sparc and sparc64, the rtc driver doesn't compile with PCI support disabled. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
Make sctp_writeable() use sk_wmem_alloc rather than sk_wmem_queued to determine the sndbuf space available. It also removes all the modifications to sk_wmem_queued as it is not currently used in SCTP. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
When we insert a new xfrm_state which potentially subsumes an existing one, make sure all cached bundles are flushed so that the new SA is used immediately. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Strictly speaking, the NPTL kernel helpers are required for pre ARMv6 only. They are available on ARMv6+ as well for obvious compatibility reasons. However there are cases where extra memory barriers are needed when using an SMP ARMv6 machine but not on pre-ARMv6. This patch adds a memory barrier kernel helper that glibc can use as needed for pre-ARMv6 binaries to be forward compatible with an SMP kernel on ARMv6, as well as the necessary dmb instructions to the cmpxchg helper. Signed-off-by: NNicolas Pitre <nico@cam.org> Acked-by: NDaniel Jacobowitz <dan@codesourcery.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
The route expiration time is stored in rt6i_expires in jiffies. The argument of rt6_route_add() for adding a route is not the expiration time in jiffies nor in clock_t, but the lifetime (or time left before expiration) in clock_t. Because of the confusion, we sometimes saw several strange errors (FAILs) in TAHI IPv6 Ready Logo Phase-2 Self Test. The symptoms were analyzed by Mitsuru Chinen <CHINEN@jp.ibm.com>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart De Schuymer 提交于
A typo caused some bridged IPv6 packets to get dropped randomly, as reported by Sebastien Chaumontet. The patch below fixes this (using skb->nh.raw instead of raw) and also makes the jumbo packet length checking up-to-date with the code in net/ipv6/exthdrs.c::ipv6_hop_jumbo. Signed-off-by: NBart De Schuymer <bdschuym@pandora.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristian Slavov 提交于
I reported a problem and gave hints to the solution, but nobody seemed to react. So I prepared a patch against 2.6.14.4. Tested on 2.6.14.4 with "ip monitor addr" and with the program attached, while adding and removing IPv6 address. Both programs didn't receive any messages. Tested 2.6.14.4 + this patch, and both programs received add and remove messages. Signed-off-by: NKristian Slavov <kristian.slavov@nomadiclab.com> Acked-by: NJamal Hadi salim <hadi@cyberus.ca> ACKed-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
IP6_NF_TARGET_NFQUEUE depends on IP6_NF_IPTABLES, not IP_NF_IPTABLES. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As noticed by Phil Oester, the GRE NAT protocol helper is initialized before the NAT core, which makes registration fail. Change the linking order to make NAT be initialized first. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2005 6 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- This patch updates MAINTAINERS file by replacing quilt to git SCM Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- Fix a broken logic that didn't cover all standards. - Fix compilation failure with gcc 2.95.3. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Oliver Endriss 提交于
- Enable SPDIF output for DVB-S rev 2.3. Firmware 2623 or higher required. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Ricardo Cerqueira 提交于
- Tuner 100 is the TUNER_PHILIPS_FMD1216ME_MK3, not TUNER_ABSENT. This was causing the tuner module to be skipped, and rendered boards with this value in the eeprom (like the HVR1100) unable to tune Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Jean Delvare 提交于
- Fix compilation failure with gcc 2.95.3. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Linus Torvalds 提交于
Also renamed in honor of Portland being snowed in and everybody sliding around on the highways like greased pumpkins. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-