- 07 4月, 2009 1 次提交
-
-
由 Hans Verkuil 提交于
s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2009 6 次提交
-
-
由 Hans Verkuil 提交于
Convert this driver to v4l2_subdev. Note that currently the only card with analog support in this driver is the HVR-1800. The analog tuner support in this driver is limited to what is needed for this board. When analog support is added for other cards, then the tuner load code will probably have to be expanded to take care of those boards. For example, there is currently no support for either radio tuners or tda9887 demods. I'd like to thank Steven Toth for testing this on his HVR-1800. Tested-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The new support for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board broke the existing boards. Interrupts for the netup part were enabled and handled without testing whether the current board actually had a netup -> instant and fatal crash. I've added tests to do this only for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
Add support for NetUP Dual DVB-S2 CI card The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips, STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator. http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CISigned-off-by: NIgor M. Liplianin <liplianin@netup.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
DVBWorld DVBS2 PCI-e 2005 card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/DVBWorld_DVB-S2_2005_PCI-Express_Card The card tested by me (Igor). Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
TeVii S470 DVB-S2 PCI-e card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/TeVii_S470 The card tested by me (Igor). Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/TBS_6920 The card tested by me (Igor). Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 12月, 2008 1 次提交
-
-
由 Igor M. Liplianin 提交于
Add Compro VideoMate E650F (DVB-T part only). The card based on cx23885 PCI-Express chip, xc3028 tuner and ce6353 demodulator. Cc: Steven Toth <stoth@linuxtv.org> Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 10月, 2008 8 次提交
-
-
由 Darron Broad 提交于
To optimise data storage even further one other redundant var has been removed. This also removes a redundant assignment. Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NDarron Broad <darron@kewl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
cx23885: Checkpatch compliance Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
cx23885 frontend allocation code needs to exist in the higher function, and it also needs to ensure videobug is also correctly initialised on a per frontend basis. This code uses the previous num_frontends patch to safely init each future MFE frontend on a single tsport as as safely as possible - given that we don't have any of those boards. Again, better to add all of this safety code now, while the MFE patch set is fresh in everyone mind, than to try and add it 12-24 months from now, when the subject is cold. Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Bug: the tree generated an oops when the cx23885 was laoded. This avoids the oops by ensuring the mutex is correctly initialised before it's used. Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Darron Broad 提交于
This add frontend R/W mutual exclusion. Prior to this point in time it was possible to open both frontends simultaneously which an MFE card cannot support. In order to stop this, a delayed open is performed which has the following function: - Return EBUSY after a configurable amount of time if a frontend is unavailable due to the other being in use. - Only allow opening of a frontend if the kernel thread of the other has stopped. This solution was chosen to allow switching between frontends to work as seamlessly as possible. When both frontends are actually opened simultaneously then one will only open, but if quick switching is performed between one of many then the new open will succeed in a clean fashion rather than interrupting a kernel thread. Signed-off-by: NDarron Broad <darron@kewl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Darron Broad 提交于
When using MFE on a setup with both and HVR-3000 and ASUS P7131 card it was noticed that frontend allocation for saa7134 adapters was missing. This patch adds that allocation for both saa7134 and cx23885 adapters. Signed-off-by: NDarron Broad <darron@kewl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Darron Broad 提交于
A number of reference to videobuf_dvb_get_frontend used an invalid index. This has been fixed. The section for the HVR3000 in advise_acquire was redundant as the same logic is used on the HVR4000. This has been removed and both cards now use the same function. A number of small errors and whitespace errors are also fixed. Signed-off-by: NDarron Broad <darron@kewl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
A detailed description from the original patches 2 years ago: "The WinTV-HVR3000 has a single transport bus which is shared between a DVB-T and DVB-S modulator. These patches build on the bus acquisition cx88 work from a few weeks ago to add support for this. So to applications the HVR3000 looks like this: /dev/dvb/adapter0/fe0 (cx24123 DVB-S demod) /dev/dvb/adapter0/fe1 (cx22702 DVB-T demod) Additional boards continue as before, eg: /dev/dvb/adapter1/fe0 (lgdt3302 ATSC demod) The basic change is removing the single instance of the videobuf_dvb in cx8802_dev and saa7134_dev(?) and replacing it with a list and some supporting functions. *NOTE* This branch was taken before v4l-dvb was closed for 2.6.19 so two or three current cx88 patches appear to be reversed by this tree, this will be cleaned up in the near future. The patches missing change the mutex handing to core->lock, fix an enumeration problem." It should be recognised that a number of people have been maintaining this patchset. Significant levels of Kudos to everyone one involved, including but not limited to: Darron Broad Fabio M. Di Nitto Carlo Scarfoglio Hans Werner Without the work of these people, and countless others, my two year old patches would of died on the Mercurial linuxtv.org vine a long time ago. TODO: Revise these patches a little further so that the need for demux1 and dvr0 is optional, not mandatory on the HVR3000. HISTORY (darron): This is the last update to MFE prepared by Hans which is based upon the `scratchpad' diff created by Carlo. All MFE work prior to that point must be attributed to Fabio who ported and maintained Steve's original patch up to that time. Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NDarron Broad <darron@kewl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 10月, 2008 9 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Firmware selection is very tricky on this device. This patch do a better selection of the proper firmware type, by using a code to hint if the firmware to be loaded should be D2620 or D2633. It also allows overriding the hint at the control structure. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Dont pass devptr in xc5000_attach, dont store it in xc5000_priv. This pointer is passed into the tuner_callback function, which always expects a pointer to fe->dvb->priv or i2c_adapter->algo_data. This prevents future possible bugs in new drivers, such as using a "devptr" other that the standard fe->dvb->priv in a DVB driver. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
This patch is on behalf of Stephen Backway <stev391@email.com>, and represents two patches I received (and some subsequent whitespace cleanup I had due to how I pulled the patches). From the original author: a) Add DVB support for the Leadtek Winfast PxDVR3200 H. b) The tuner callback previously checked the command 3 times: 1) To see if it was the XC2028_RESET_CLK 2) To see if it was not the XC2028_RESET_TUNER 3) To see if it was the XC2028_RESET_TUNER This patch removes the third check. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NStephen Backway <stev391@email.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Code reduction. Tuner callback now assumes that tsport is passed as the void arg. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Add support for the DViCO FusionHDTV DVB-T Dual Express card, based on work by Chris Pascoe and Stephen Backway. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
The Hauppauge HVR1400 and HVR1500 can now use the common cx23885 tuner callback. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Tuners currently hook different things to the private pointer in their callback function. Longer term we should make that private pointer consistent, but for now separate out the guts of the cx23885 tuner callback so we can reuse it. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 04 9月, 2008 1 次提交
-
-
由 Steven Toth 提交于
I need this so I can better isolate my linux email from my corporate email. Signed-off-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 20 7月, 2008 2 次提交
-
-
由 Michael Krufky 提交于
The new revision of this board uses the same pci subsystem id as the first revision, but uses a S5H1411 demodulator instead of the S5H1409. In the case of the FusionHDTV7 Dual Express, if s5h1409_attach fails, try s5h1411_attach. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Only one frontend is enabled right now. The second frontend can lock, but transport doesn't work yet. The device will be supported as a single tuner device until the second frontend is working. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 14 5月, 2008 2 次提交
-
-
由 Michael Krufky 提交于
The current code passes a context pointer in the xc5000_config struct. This context pointer is used in the tuner_callback function, used to reset the device after firmware download. The xc5000_config struct is a static structure, whose .priv member was being assigned before calling xc5000_attach(). If there are more than one of the same device type installed on a single system, the last one to assign xc5000_config.priv will "win", and all others will cease to function properly. This patch passes the context pointer in xc5000_attach() rather that storing it within the static struct xc5000_config. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The cx23885 driver used to use dvb-pll for LG-TDVS-H064F support on the FusionHDTV5 Express. This has since been converted to use tuner-simple instead, once digital tuning support was added to tuner-simple. Since cx23885 no longer uses dvb-pll, remove the #include "dvb-pll.h", and the DVB_PLL Kconfig selection. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 4月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 4月, 2008 9 次提交
-
-
由 Steven Toth 提交于
DVB-T mode is now supported using the DiBcom dib7000p demodulator and the Xceive xc3028L silicon tuner. Analog mode is not supported. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Reviewed-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This patch fixes several issues on SCODE: 1) The extracting tool weren't generating the proper tags for SCODE. This has almost no effect, since those tags shouldn't be used; 2) DIBCOM52 were using a wrong IF. It should be 5200, instead of 5700; 3) seek_firmware were wanting an exact match for firmware type. This is wrong. As result, no SCODE firmware were loaded; 4) A few files were including the wrong file for seeking demod firmwares; 5) XC3028_FE_DEFAULT can be used, if user doesn't want to load a firmware. However, this weren't documentated. This feature require more testing. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
This adds support for DVB-T mode only, analog is not supported. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
This adds support for DVB-T mode only, analog mode is not supported. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Janne Grunau 提交于
The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: NJanne Grunau <janne-dvb@grunau.be> Acked-by: NHermann Pitton <hermann.pitton@arcor.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
allow device-specific configuration of rf agc rf top and if top Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Convert cx88-dvb, dvb-bt8xx, b2c2-flexcop, cxusb and cx23885 to use tuner-simple instead of dvb-pll for LG TDVS-H06xF Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-