Setting the alarm to a time not on a minute boundary results in repeated
interrupts being generated by the DA9052/3 PMIC device until the kernel
RTC core sees that the alarm has rung.  Sometimes the number and frequency
of interrupts can cause the kernel to disable the IRQ line used by the
DA9052/3 PMIC with disasterous consequences.  This patch fixes the
problem.

Even though the DA9052/3 PMIC is capable generating periodic interrupts,
ie TICKS, the method used to distinguish RTC_AF from RTC_PF events was
flawed and can not work in conjunction with the regmap_irq kernel core.
Thus that flawed detection has also been removed by the DA9052/3 PMIC RTC
driver's irq handler, so that it no longer reports the wrong type of event
to the kernel RTC core.

The internal static functions within the DA9052/3 PMIC RTC driver have
been changed to pass the 'da9052_rtc' structure instead of the 'da9052'
because there is no backwards pointer from the 'da9052' structure.

This patch fixes the three issues described above.  The first is serious
because usiing the RTC alarm set to a non minute boundary will eventually
cause all component drivers that depend on the interrupt line to fail.
The solution adopted is to round up to alarm time to the next highest
minute.

The second bug, reporting a RTC_PF event instead of an RTC_AF event turns
out to not matter with the current implementation of the kernel RTC core
as it seems to ignore the event type.  However, should that change in the
future it is better to fix the issue now and not have 'problems waiting to
happen'

The third set of changes are to make the da9052_rtc structure available to
all the local internal functions in the driver.  This was done during
testing so that diagnostic data could be stored there.  Should the
solution to the first issue be found not acceptable, then the alternative
of using the TICKS interrupt at the fixed one second interval in order to
step to the exact second of the requested alarm requires an extra (alarm
time) piece of data to be stored.  In devices that use the alarm function
to wake up from sleep, accuracy to the second will result in the device
being awake for up to nearly a minute longer than expected.
Signed-off-by: NAnthony Olech <anthony.olech.opensource@diasemi.com>
Cc: David Dajun Chen <dchen@diasemi.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing of_node_put() to decrement the reference count.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use of_get_child_by_name() to obtain reference to charger node instead of
of_find_node_by_name() which can walk outside of the parent node.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds an RTC platform device for DECstation systems so that they can
use the rtc-cmos driver for their RTC device.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This brings in drivers/char/rtc.c functionality required for DECstation
and, should the maintainers decide to switch, Alpha systems to use
rtc-cmos.

Specifically these features are made available:

* RTC iomem rather than x86/PCI port I/O mapping, controlled with the
  RTC_IOMAPPED macro as with the original driver.  The DS1287A chip in all
  DECstation systems is mapped in the host bus address space as a
  contiguous block of 64 32-bit words of which the least significant byte
  accesses the RTC chip for both reads and writes.  All the address and
  data window register accesses are made transparently by the chipset glue
  logic so that the device appears directly mapped on the host bus.

* A way to set the size of the address space explicitly with the
  newly-added `address_space' member of the platform part of the RTC
  device structure.  This avoids the unreliable heuristics that does not
  work in a setup where the RTC is not explicitly accessed with the usual
  address and data window register pair.

* The ability to use the RTC periodic interrupt as a system clock
  device, which is implemented by arch/mips/kernel/cevt-ds1287.c for
  DECstation systems and takes the RTC interrupt away from the RTC driver.
   Eventually hooking back to the clock device's interrupt handler should
  be possible for the purpose of the alarm clock and possibly also
  update-in-progress interrupt, but this is not done by this change.

  o To avoid interfering with the clock interrupt all the places where
    the RTC interrupt mask is fiddled with are only executed if and IRQ
    has been assigned to the RTC driver.

  o To avoid changing the clock setup Register A is not fiddled with
    if CMOS_RTC_FLAGS_NOFREQ is set in the newly-added `flags' member of
    the platform part of the RTC device structure.  Originally, in
    drivers/char/rtc.c, this was keyed with the absence of the RTC
    interrupt, just like the interrupt mask, but there only the periodic
    interrupt frequency is set, whereas rtc-cmos also sets the divider
    bits.  Therefore a new flag is introduced so that systems where the
    RTC interrupt is not usable rather than used as a system clock device
    can fully initialise the RTC.

* A small clean-up is made to the IRQ assignment code that makes the IRQ
  number hardcoded to -1 rather than arbitrary -ENXIO (or whatever error
  happens to be returned by platform_get_irq) where no IRQ has been
  assigned to the RTC driver (NO_IRQ might be another candidate, but it
  looks like this macro has inconsistent or missing definitions and
  limited use and might therefore be unsafe).

Verified to work correctly with a DECstation 5000/240 system.

[akpm@linux-foundation.org: fix weird code layout]
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Compared source code of rtc-lib.c::rtc_year_days() with
efirtc.c::rtc_year_days(), found the code in rtc-efi decreases value of
day twice when it computing year days.  rtc-lib.c::rtc_year_days() has
already decrease days and return the year days from 0 to 365.
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWolfram Sang <wsa@sang-engineering.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't replace the value we got from the I2C layer, just pass it on.
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no cleanup needed when something fails in probe, so no need for
goto.  Directly return when something fails.
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

History is in git, no need for sperate versioning.  Also remove the
success printout, RTC core does it, too.
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds APM X-Gene SoC RTC DTS entry
Signed-off-by: NRameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: NLoc Ho <lho@apm.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the APM X-Gene SoC RTC driver.
Signed-off-by: NRameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: NLoc Ho <lho@apm.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: NLoc Ho <lho@apm.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In __rtc_read_alarm(), if the alarm time retrieved by
rtc_read_alarm_internal() from the device contains invalid values (e.g.
month=2,mday=31) and the year not set (=-1), the initialization will
loop infinitely because the year-fixing loop expects the time being
invalid due to leap year.

Fix reduces the loop to the leap years and adds final validity check.
Signed-off-by: NAles Novak <alnovak@suse.cz>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Reported-by: NJiri Bohac <jbohac@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace seq_printf where possible.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the last pr_warning callsites in fs branch
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, if allocation constraint to node is NUMA_NO_NODE, we search a
partial slab on numa_node_id() node.  This doesn't work properly on a
system having memoryless nodes, since it can have no memory on that node
so there must be no partial slab on that node.

On that node, page allocation always falls back to numa_mem_id() first.
So searching a partial slab on numa_node_id() in that case is the proper
solution for the memoryless node case.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Han Pingtian <hanpt@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When kswapd exits, it can end up taking locks that were previously held
by allocating tasks while they waited for reclaim.  Lockdep currently
warns about this:

On Wed, May 28, 2014 at 06:06:34PM +0800, Gu Zheng wrote:
>  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-R} usage.
>  kswapd2/1151 [HC0[0]:SC0[0]:HE1:SE1] takes:
>   (&sig->group_rwsem){+++++?}, at: exit_signals+0x24/0x130
>  {RECLAIM_FS-ON-W} state was registered at:
>     mark_held_locks+0xb9/0x140
>     lockdep_trace_alloc+0x7a/0xe0
>     kmem_cache_alloc_trace+0x37/0x240
>     flex_array_alloc+0x99/0x1a0
>     cgroup_attach_task+0x63/0x430
>     attach_task_by_pid+0x210/0x280
>     cgroup_procs_write+0x16/0x20
>     cgroup_file_write+0x120/0x2c0
>     vfs_write+0xc0/0x1f0
>     SyS_write+0x4c/0xa0
>     tracesys+0xdd/0xe2
>  irq event stamp: 49
>  hardirqs last  enabled at (49):  _raw_spin_unlock_irqrestore+0x36/0x70
>  hardirqs last disabled at (48):  _raw_spin_lock_irqsave+0x2b/0xa0
>  softirqs last  enabled at (0):  copy_process.part.24+0x627/0x15f0
>  softirqs last disabled at (0):            (null)
>
>  other info that might help us debug this:
>   Possible unsafe locking scenario:
>
>         CPU0
>         ----
>    lock(&sig->group_rwsem);
>    <Interrupt>
>      lock(&sig->group_rwsem);
>
>   *** DEADLOCK ***
>
>  no locks held by kswapd2/1151.
>
>  stack backtrace:
>  CPU: 30 PID: 1151 Comm: kswapd2 Not tainted 3.10.39+ #4
>  Call Trace:
>    dump_stack+0x19/0x1b
>    print_usage_bug+0x1f7/0x208
>    mark_lock+0x21d/0x2a0
>    __lock_acquire+0x52a/0xb60
>    lock_acquire+0xa2/0x140
>    down_read+0x51/0xa0
>    exit_signals+0x24/0x130
>    do_exit+0xb5/0xa50
>    kthread+0xdb/0x100
>    ret_from_fork+0x7c/0xb0

This is because the kswapd thread is still marked as a reclaimer at the
time of exit.  But because it is exiting, nobody is actually waiting on
it to make reclaim progress anymore, and it's nothing but a regular
thread at this point.  Be tidy and strip it of all its powers
(PF_MEMALLOC, PF_SWAPWRITE, PF_KSWAPD, and the lockdep reclaim state)
before returning from the thread function.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull arm64 updates from Catalin Marinas:
 - Optimised assembly string/memory routines (based on the AArch64
   Cortex Strings library contributed to glibc but re-licensed under
   GPLv2)
 - Optimised crypto algorithms making use of the ARMv8 crypto extensions
   (together with kernel API for using FPSIMD instructions in interrupt
   context)
 - Ftrace support
 - CPU topology parsing from DT
 - ESR_EL1 (Exception Syndrome Register) exposed to user space signal
   handlers for SIGSEGV/SIGBUS (useful to emulation tools like Qemu)
 - 1GB section linear mapping if applicable
 - Barriers usage clean-up
 - Default pgprot clean-up

Conflicts as per Catalin.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (57 commits)
  arm64: kernel: initialize broadcast hrtimer based clock event device
  arm64: ftrace: Add system call tracepoint
  arm64: ftrace: Add CALLER_ADDRx macros
  arm64: ftrace: Add dynamic ftrace support
  arm64: Add ftrace support
  ftrace: Add arm64 support to recordmcount
  arm64: Add 'notrace' attribute to unwind_frame() for ftrace
  arm64: add __ASSEMBLY__ in asm/insn.h
  arm64: Fix linker script entry point
  arm64: lib: Implement optimized string length routines
  arm64: lib: Implement optimized string compare routines
  arm64: lib: Implement optimized memcmp routine
  arm64: lib: Implement optimized memset routine
  arm64: lib: Implement optimized memmove routine
  arm64: lib: Implement optimized memcpy routine
  arm64: defconfig: enable a few more common/useful options in defconfig
  ftrace: Make CALLER_ADDRx macros more generic
  arm64: Fix deadlock scenario with smp_send_stop()
  arm64: Fix machine_shutdown() definition
  arm64: Support arch_irq_work_raise() via self IPIs
  ...

Russell King points out that my ARM merge (commit eb3d3ec5) was
broken wrt the arch/arm/mach-mvebu/board-v7.c file, leaving in a stale
l2x0_of_init() call (it's now handled by the DT description).

Which is kind of embarrassing, since I knew about it as it wasn't the
only file that had similar merge issues.  At least I got the other ones
right.
Reported-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull Microblaze updates from Michal Simek:
 - cleanup PCI and DMA handling
 - use generic device.h
 - some cleanups

* tag 'microblaze-3.16-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix typo in head.S s/substract/subtract/
  microblaze: remove check for CONFIG_XILINX_CONSOLE
  microblaze: Use generic device.h
  microblaze: Do not setup empty unmap_sg function
  microblaze: Remove device_to_mask
  microblaze: Clean device dma_ops structure
  microblaze: Cleanup PCI_DRAM_OFFSET handling
  microblaze: Do not setup pci_dma_ops
  microblaze: Return default dma operations
  microblaze: Enable SERIAL_OF_PLATFORM

Pull ARM updates from Russell King:

 - Major clean-up of the L2 cache support code.  The existing mess was
   becoming rather unmaintainable through all the additions that others
   have done over time.  This turns it into a much nicer structure, and
   implements a few performance improvements as well.

 - Clean up some of the CP15 control register tweaks for alignment
   support, moving some code and data into alignment.c

 - DMA properties for ARM, from Santosh and reviewed by DT people.  This
   adds DT properties to specify bus translations we can't discover
   automatically, and to indicate whether devices are coherent.

 - Hibernation support for ARM

 - Make ftrace work with read-only text in modules

 - add suspend support for PJ4B CPUs

 - rework interrupt masking for undefined instruction handling, which
   allows us to enable interrupts earlier in the handling of these
   exceptions.

 - support for big endian page tables

 - fix stacktrace support to exclude stacktrace functions from the
   trace, and add save_stack_trace_regs() implementation so that kprobes
   can record stack traces.

 - Add support for the Cortex-A17 CPU.

 - Remove last vestiges of ARM710 support.

 - Removal of ARM "meminfo" structure, finally converting us solely to
   memblock to handle the early memory initialisation.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
  ARM: ensure C page table setup code follows assembly code (part II)
  ARM: ensure C page table setup code follows assembly code
  ARM: consolidate last remaining open-coded alignment trap enable
  ARM: remove global cr_no_alignment
  ARM: remove CPU_CP15 conditional from alignment.c
  ARM: remove unused adjust_cr() function
  ARM: move "noalign" command line option to alignment.c
  ARM: provide common method to clear bits in CPU control register
  ARM: 8025/1: Get rid of meminfo
  ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
  ARM: 8066/1: correction for ARM patch 8031/2
  ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
  ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
  ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
  ARM: 8047/1: rwsem: use asm-generic rwsem implementation
  ARM: l2c: trial at enabling some Cortex-A9 optimisations
  ARM: l2c: add warnings for stuff modifying aux_ctrl register values
  ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
  ARM: l2c: remove old .set_debug method
  ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
  ...

Merge branch 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull ARM64 EFI update from Peter Anvin:
 "By agreement with the ARM64 EFI maintainers, we have agreed to make
  -tip the upstream for all EFI patches.  That is why this patchset
  comes from me :)

  This patchset enables EFI stub support for ARM64, like we already have
  on x86"

* 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64: efi: only attempt efi map setup if booting via EFI
  efi/arm64: ignore dtb= when UEFI SecureBoot is enabled
  doc: arm64: add description of EFI stub support
  arm64: efi: add EFI stub
  doc: arm: add UEFI support documentation
  arm64: add EFI runtime services
  efi: Add shared FDT related functions for ARM/ARM64
  arm64: Add function to create identity mappings
  efi: add helper function to get UEFI params from FDT
  doc: efi-stub.txt updates for ARM
  lib: add fdt_empty_tree.c

Pull x86 EFI updates from Peter Anvin:
 "A collection of EFI changes.  The perhaps most important one is to
  fully save and restore the FPU state around each invocation of EFI
  runtime, and to not choke on non-ASCII characters in the boot stub"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efivars: Add compatibility code for compat tasks
  efivars: Refactor sanity checking code into separate function
  efivars: Stop passing a struct argument to efivar_validate()
  efivars: Check size of user object
  efivars: Use local variables instead of a pointer dereference
  x86/efi: Save and restore FPU context around efi_calls (i386)
  x86/efi: Save and restore FPU context around efi_calls (x86_64)
  x86/efi: Implement a __efi_call_virt macro
  x86, fpu: Extend the use of static_cpu_has_safe
  x86/efi: Delete most of the efi_call* macros
  efi: x86: Handle arbitrary Unicode characters
  efi: Add get_dram_base() helper function
  efi: Add shared printk wrapper for consistent prefixing
  efi: create memory map iteration helper
  efi: efi-stub-helper cleanup

Pull x86 cdso updates from Peter Anvin:
 "Vdso cleanups and improvements largely from Andy Lutomirski.  This
  makes the vdso a lot less ''special''"

* 'x86/vdso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso, build: Make LE access macros clearer, host-safe
  x86/vdso, build: Fix cross-compilation from big-endian architectures
  x86/vdso, build: When vdso2c fails, unlink the output
  x86, vdso: Fix an OOPS accessing the HPET mapping w/o an HPET
  x86, mm: Replace arch_vma_name with vm_ops->name for vsyscalls
  x86, mm: Improve _install_special_mapping and fix x86 vdso naming
  mm, fs: Add vm_ops->name as an alternative to arch_vma_name
  x86, vdso: Fix an OOPS accessing the HPET mapping w/o an HPET
  x86, vdso: Remove vestiges of VDSO_PRELINK and some outdated comments
  x86, vdso: Move the vvar and hpet mappings next to the 64-bit vDSO
  x86, vdso: Move the 32-bit vdso special pages after the text
  x86, vdso: Reimplement vdso.so preparation in build-time C
  x86, vdso: Move syscall and sysenter setup into kernel/cpu/common.c
  x86, vdso: Clean up 32-bit vs 64-bit vdso params
  x86, mm: Ensure correct alignment of the fixmap

Pull x86-64 espfix changes from Peter Anvin:
 "This is the espfix64 code, which fixes the IRET information leak as
  well as the associated functionality problem.  With this code applied,
  16-bit stack segments finally work as intended even on a 64-bit
  kernel.

  Consequently, this patchset also removes the runtime option that we
  added as an interim measure.

  To help the people working on Linux kernels for very small systems,
  this patchset also makes these compile-time configurable features"

* 'x86/espfix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "x86-64, modify_ldt: Make support for 16-bit segments a runtime option"
  x86, espfix: Make it possible to disable 16-bit support
  x86, espfix: Make espfix64 a Kconfig option, fix UML
  x86, espfix: Fix broken header guard
  x86, espfix: Move espfix definitions into a separate header file
  x86-32, espfix: Remove filter for espfix32 due to race
  x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack

Pull x86 x32 ABI fix from Peter Anvin:
 "A single fix for the x32 ABI: the io_setup() and io_submit() system
  call need to use the compat stubs"

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, x32: Use compat shims for io_{setup,submit}

Signed-off-by: NAntonio Ospite <ao2@ao2.it>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Merge misc updates from Andrew Morton:

 - a few fixes for 3.16.  Cc'ed to stable so they'll get there somehow.

 - various misc fixes and cleanups

 - most of the ocfs2 queue.  Review is slow...

 - most of MM.  The MM queue is pretty huge this time, but not much in
   the way of feature work.

 - some tweaks under kernel/

 - printk maintenance work

 - updates to lib/

 - checkpatch updates

 - tweaks to init/

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (276 commits)
  fs/autofs4/dev-ioctl.c: add __init to autofs_dev_ioctl_init
  fs/ncpfs/getopt.c: replace simple_strtoul by kstrtoul
  init/main.c: remove an ifdef
  kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND
  init/main.c: add initcall_blacklist kernel parameter
  init/main.c: don't use pr_debug()
  fs/binfmt_flat.c: make old_reloc() static
  fs/binfmt_elf.c: fix bool assignements
  fs/efs: convert printk(KERN_DEBUG to pr_debug
  fs/efs: add pr_fmt / use __func__
  fs/efs: convert printk to pr_foo()
  scripts/checkpatch.pl: device_initcall is not the only __initcall substitute
  checkpatch: check stable email address
  checkpatch: warn on unnecessary void function return statements
  checkpatch: prefer kstrto<foo> to sscanf(buf, "%<lhuidx>", &bar);
  checkpatch: add warning for kmalloc/kzalloc with multiply
  checkpatch: warn on #defines ending in semicolon
  checkpatch: make --strict a default for files in drivers/net and net/
  checkpatch: always warn on missing blank line after variable declaration block
  checkpatch: fix wildcard DT compatible string checking
  ...

autofs_dev_ioctl_init is only called by __init init_autofs4_fs
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove obsolete simple_strtoul in ncp_getopt
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

1. Remove CLONE_KERNEL, it has no users and it is dangerous.

   The (old) comment says "List of flags we want to share for kernel
   threads" but this is not true, we do not want to share ->sighand by
   default. This flag can only be used if the caller is sure that both
   parent/child will never play with signals (say, allow_signal/etc).

2. Change rest_init() to clone kernel_init() without CLONE_SIGHAND.

   In this case CLONE_SIGHAND does not really hurt, and it looks like
   optimization because copy_sighand() can avoid kmem_cache_alloc().

   But in fact this only adds the minor pessimization. kernel_init()
   is going to exec the init process, and de_thread() will need to
   unshare ->sighand and do kmem_cache_alloc(sighand_cachep) anyway,
   but it needs to do more work and take tasklist_lock and siglock.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a module is built into the kernel the module_init() function
becomes an initcall.  Sometimes debugging through dynamic debug can
help, however, debugging built in kernel modules is typically done by
changing the .config, recompiling, and booting the new kernel in an
effort to determine exactly which module caused a problem.

This patchset can be useful stand-alone or combined with initcall_debug.
There are cases where some initcalls can hang the machine before the
console can be flushed, which can make initcall_debug output inaccurate.
Having the ability to skip initcalls can help further debugging of these
scenarios.

Usage: initcall_blacklist=<list of comma separated initcalls>

ex) added "initcall_blacklist=sgi_uv_sysfs_init" as a kernel parameter and
the log contains:

	blacklisting initcall sgi_uv_sysfs_init
	...
	...
	initcall sgi_uv_sysfs_init blacklisted

ex) added "initcall_blacklist=foo_bar,sgi_uv_sysfs_init" as a kernel parameter
and the log contains:

	blacklisting initcall foo_bar
	blacklisting initcall sgi_uv_sysfs_init
	...
	...
	initcall sgi_uv_sysfs_init blacklisted

[akpm@linux-foundation.org: tweak printk text]
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Rob Landley <rob@landley.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pertially revert commit ea676e84 ("init/main.c: convert to
pr_foo()").

Unbeknownst to me, pr_debug() is different from the other pr_foo()
levels: pr_debug() is a no-op when DEBUG is not defined.

Happily, init/main.c does have a #define DEBUG so we didn't break
initcall_debug.  But the functioning of initcall_debug should not be
dependent upon the presence of that #define DEBUG.
Reported-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

old_reloc() is only used in this file, make it static.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix coccinelle warnings.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All KERN_DEBUG callsites being under #ifdef DEBUG we can safely convert
everything to pr_debug without changing current behaviour.

Remove #ifdef DEBUG around pr_debugs only (suggested by Joe Perches)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>