trivial fix to spelling mistake

Link: http://lkml.kernel.org/r/1466672144-831-1-git-send-email-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The value `bytes' comes from the filesystem which is about to be
mounted.  We cannot trust that the value is always in the range we
expect it to be.

Check its value before using it to calculate the length for the crc32_le
call.  It value must be larger (or equal) sumoff + 4.

This fixes a kernel bug when accidentially mounting an image file which
had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance.
The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a
s_bytes value of 1.  This caused an underflow when substracting sumoff +
4 (20) in the call to crc32_le.

  BUG: unable to handle kernel paging request at ffff88021e600000
  IP:  crc32_le+0x36/0x100
  ...
  Call Trace:
    nilfs_valid_sb.part.5+0x52/0x60 [nilfs2]
    nilfs_load_super_block+0x142/0x300 [nilfs2]
    init_nilfs+0x60/0x390 [nilfs2]
    nilfs_mount+0x302/0x520 [nilfs2]
    mount_fs+0x38/0x160
    vfs_kern_mount+0x67/0x110
    do_mount+0x269/0xe00
    SyS_mount+0x9f/0x100
    entry_SYSCALL_64_fastpath+0x16/0x71

Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tetsuo has reported the following potential oom_killer_disable vs.
oom_reaper race:

 (1) freeze_processes() starts freezing user space threads.
 (2) Somebody (maybe a kenrel thread) calls out_of_memory().
 (3) The OOM killer calls mark_oom_victim() on a user space thread
     P1 which is already in __refrigerator().
 (4) oom_killer_disable() sets oom_killer_disabled = true.
 (5) P1 leaves __refrigerator() and enters do_exit().
 (6) The OOM reaper calls exit_oom_victim(P1) before P1 can call
     exit_oom_victim(P1).
 (7) oom_killer_disable() returns while P1 not yet finished
 (8) P1 perform IO/interfere with the freezer.

This situation is unfortunate.  We cannot move oom_killer_disable after
all the freezable kernel threads are frozen because the oom victim might
depend on some of those kthreads to make a forward progress to exit so
we could deadlock.  It is also far from trivial to teach the oom_reaper
to not call exit_oom_victim() because then we would lose a guarantee of
the OOM killer and oom_killer_disable forward progress because
exit_mm->mmput might block and never call exit_oom_victim.

It seems the easiest way forward is to workaround this race by calling
try_to_freeze_tasks again after oom_killer_disable.  This will make sure
that all the tasks are frozen or it bails out.

Fixes: 449d777d ("mm, oom_reaper: clear TIF_MEMDIE for all tasks queued for oom_reaper")
Link: http://lkml.kernel.org/r/1466597634-16199-1-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to some high-load testing, these two BUG assertions were
encountered, this led system panic.  Actually, there were some
discussions about removing these two BUG() assertions, it would not
bring any side effect.

Then, I did the the following changes,

1) use the existing macro CATCH_BH_JBD_RACES to wrap BUG() in the
   ocfs2_read_blocks_sync function like before.

2) disable the macro CATCH_BH_JBD_RACES in Makefile by default.

Link: http://lkml.kernel.org/r/1466574294-26863-1-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the memory compaction free scanner cannot successfully split a free
page (only possible due to per-zone low watermark), terminate the free
scanner rather than continuing to scan memory needlessly.  If the
watermark is insufficient for a free page of order <= cc->order, then
terminate the scanner since all future splits will also likely fail.

This prevents the compaction freeing scanner from scanning all memory on
very large zones (very noticeable for zones > 128GB, for instance) when
all splits will likely fail while holding zone->lock.

compaction_alloc() iterating a 128GB zone has been benchmarked to take
over 400ms on some systems whereas any free page isolated and ready to
be split ends up failing in split_free_page() because of the low
watermark check and thus the iteration continues.

The next time compaction occurs, the freeing scanner will likely start
at the end of the zone again since no success was made previously and we
get the same lengthy iteration until the zone is brought above the low
watermark.  All thp page faults can take >400ms in such a state without
this fix.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606211820350.97086@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When kmemleak dumps contents of leaked objects it reads whole objects
regardless of user-requested size.  This upsets KASAN.  Disable KASAN
checks around object dump.

Link: http://lkml.kernel.org/r/1466617631-68387-1-git-send-email-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While working on s390 support for gigantic hugepages I ran into the
following "Bad page state" warning when freeing gigantic pages:

  BUG: Bad page state in process bash  pfn:580001
  page:000003d116000040 count:0 mapcount:0 mapping:ffffffff00000000 index:0x0
  flags: 0x7fffc0000000000()
  page dumped because: non-NULL mapping

This is because page->compound_mapcount, which is part of a union with
page->mapping, is initialized with -1 in prep_compound_gigantic_page(),
and not cleared again during destroy_compound_gigantic_page().  Fix this
by clearing the compound_mapcount in destroy_compound_gigantic_page()
before clearing compound_head.

Interestingly enough, the warning will not show up on x86_64, although
this should not be architecture specific.  Apparently there is an
endianness issue, combined with the fact that the union contains both a
64 bit ->mapping pointer and a 32 bit atomic_t ->compound_mapcount as
members.  The resulting bogus page->mapping on x86_64 therefore contains
00000000ffffffff instead of ffffffff00000000 on s390, which will falsely
trigger the PageAnon() check in free_pages_prepare() because
page->mapping & PAGE_MAPPING_ANON is true on little-endian architectures
like x86_64 in this case (the page is not compound anymore,
->compound_head was already cleared before).  As a result, page->mapping
will be cleared before doing the checks in free_pages_check().

Not sure if the bogus "PageAnon() returning true" on x86_64 for the
first tail page of a gigantic page (at this stage) has other theoretical
implications, but they would also be fixed with this patch.

Link: http://lkml.kernel.org/r/1466612719-5642-1-git-send-email-gerald.schaefer@de.ibm.comSigned-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we can have compound pages held on per cpu pagevecs, which
leads to a lot of memory unavailable for reclaim when needed.  In the
systems with hundreads of processors it can be GBs of memory.

On of the way of reproducing the problem is to not call munmap
explicitly on all mapped regions (i.e.  after receiving SIGTERM).  After
that some pages (with THP enabled also huge pages) may end up on
lru_add_pvec, example below.

  void main() {
  #pragma omp parallel
  {
	size_t size = 55 * 1000 * 1000; // smaller than  MEM/CPUS
	void *p = mmap(NULL, size, PROT_READ | PROT_WRITE,
		MAP_PRIVATE | MAP_ANONYMOUS , -1, 0);
	if (p != MAP_FAILED)
		memset(p, 0, size);
	//munmap(p, size); // uncomment to make the problem go away
  }
  }

When we run it with THP enabled it will leave significant amount of
memory on lru_add_pvec.  This memory will be not reclaimed if we hit
OOM, so when we run above program in a loop:

	for i in `seq 100`; do ./a.out; done

many processes (95% in my case) will be killed by OOM.

The primary point of the LRU add cache is to save the zone lru_lock
contention with a hope that more pages will belong to the same zone and
so their addition can be batched.  The huge page is already a form of
batched addition (it will add 512 worth of memory in one go) so skipping
the batching seems like a safer option when compared to a potential
excess in the caching which can be quite large and much harder to fix
because lru_add_drain_all is way to expensive and it is not really clear
what would be a good moment to call it.

Similarly we can reproduce the problem on lru_deactivate_pvec by adding:
madvise(p, size, MADV_FREE); after memset.

This patch flushes lru pvecs on compound page arrival making the problem
less severe - after applying it kill rate of above example drops to 0%,
due to reducing maximum amount of memory held on pvec from 28MB (with
THP) to 56kB per CPU.
Suggested-by: NMichal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/1466180198-18854-1-git-send-email-lukasz.odzioba@intel.comSigned-off-by: NLukasz Odzioba <lukasz.odzioba@intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Ming Li <mingli199x@qq.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_css_alloc() was returning NULL on failure while cgroup core
expected it to return an ERR_PTR value leading to the following NULL
deref after a css allocation failure.  Fix it by return
ERR_PTR(-ENOMEM) instead.  I'll also update cgroup core so that it
can handle NULL returns.

  mkdir: page allocation failure: order:6, mode:0x240c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO)
  CPU: 0 PID: 8738 Comm: mkdir Not tainted 4.7.0-rc3+ #123
  ...
  Call Trace:
    dump_stack+0x68/0xa1
    warn_alloc_failed+0xd6/0x130
    __alloc_pages_nodemask+0x4c6/0xf20
    alloc_pages_current+0x66/0xe0
    alloc_kmem_pages+0x14/0x80
    kmalloc_order_trace+0x2a/0x1a0
    __kmalloc+0x291/0x310
    memcg_update_all_caches+0x6c/0x130
    mem_cgroup_css_alloc+0x590/0x610
    cgroup_apply_control_enable+0x18b/0x370
    cgroup_mkdir+0x1de/0x2e0
    kernfs_iop_mkdir+0x55/0x80
    vfs_mkdir+0xb9/0x150
    SyS_mkdir+0x66/0xd0
    do_syscall_64+0x53/0x120
    entry_SYSCALL64_slow_path+0x25/0x25
  ...
  BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
  IP:  init_and_link_css+0x37/0x220
  PGD 34b1e067 PUD 3a109067 PMD 0
  Oops: 0002 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 8738 Comm: mkdir Not tainted 4.7.0-rc3+ #123
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.2-20160422_131301-anatol 04/01/2014
  task: ffff88007cbc5200 ti: ffff8800666d4000 task.ti: ffff8800666d4000
  RIP: 0010:[<ffffffff810f2ca7>]  [<ffffffff810f2ca7>] init_and_link_css+0x37/0x220
  RSP: 0018:ffff8800666d7d90  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: ffffffff810f2499 RSI: 0000000000000000 RDI: 0000000000000008
  RBP: ffff8800666d7db8 R08: 0000000000000003 R09: 0000000000000000
  R10: 0000000000000001 R11: 0000000000000000 R12: ffff88005a5fb400
  R13: ffffffff81f0f8a0 R14: ffff88005a5fb400 R15: 0000000000000010
  FS:  00007fc944689700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f3aed0d2b80 CR3: 000000003a1e8000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
    cgroup_apply_control_enable+0x1ac/0x370
    cgroup_mkdir+0x1de/0x2e0
    kernfs_iop_mkdir+0x55/0x80
    vfs_mkdir+0xb9/0x150
    SyS_mkdir+0x66/0xd0
    do_syscall_64+0x53/0x120
    entry_SYSCALL64_slow_path+0x25/0x25
  Code: 89 f5 48 89 fb 49 89 d4 48 83 ec 08 8b 05 72 3b d8 00 85 c0 0f 85 60 01 00 00 4c 89 e7 e8 72 f7 ff ff 48 8d 7b 08 48 89 d9 31 c0 <48> c7 83 d0 00 00 00 00 00 00 00 48 83 e7 f8 48 29 f9 81 c1 d8
  RIP   init_and_link_css+0x37/0x220
   RSP <ffff8800666d7d90>
  CR2: 00000000000000d0
  ---[ end trace a2d8836ae1e852d1 ]---

Link: http://lkml.kernel.org/r/20160621165740.GJ3262@mtj.duckdns.orgSigned-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_migrate() uses local_irq_disable/enable() but can be called
with irq disabled from migrate_page_copy().  This ends up enabling irq
while holding a irq context lock triggering the following lockdep
warning.  Fix it by using irq_save/restore instead.

  =================================
  [ INFO: inconsistent lock state ]
  4.7.0-rc1+ #52 Tainted: G        W
  ---------------------------------
  inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
  kcompactd0/151 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&(&ctx->completion_lock)->rlock){+.?.-.}, at: [<000000000038fd96>] aio_migratepage+0x156/0x1e8
  {IN-SOFTIRQ-W} state was registered at:
     __lock_acquire+0x5b6/0x1930
     lock_acquire+0xee/0x270
     _raw_spin_lock_irqsave+0x66/0xb0
     aio_complete+0x98/0x328
     dio_complete+0xe4/0x1e0
     blk_update_request+0xd4/0x450
     scsi_end_request+0x48/0x1c8
     scsi_io_completion+0x272/0x698
     blk_done_softirq+0xca/0xe8
     __do_softirq+0xc8/0x518
     irq_exit+0xee/0x110
     do_IRQ+0x6a/0x88
     io_int_handler+0x11a/0x25c
     __mutex_unlock_slowpath+0x144/0x1d8
     __mutex_unlock_slowpath+0x140/0x1d8
     kernfs_iop_permission+0x64/0x80
     __inode_permission+0x9e/0xf0
     link_path_walk+0x6e/0x510
     path_lookupat+0xc4/0x1a8
     filename_lookup+0x9c/0x160
     user_path_at_empty+0x5c/0x70
     SyS_readlinkat+0x68/0x140
     system_call+0xd6/0x270
  irq event stamp: 971410
  hardirqs last  enabled at (971409):  migrate_page_move_mapping+0x3ea/0x588
  hardirqs last disabled at (971410):  _raw_spin_lock_irqsave+0x3c/0xb0
  softirqs last  enabled at (970526):  __do_softirq+0x460/0x518
  softirqs last disabled at (970519):  irq_exit+0xee/0x110

  other info that might help us debug this:
   Possible unsafe locking scenario:

	 CPU0
	 ----
    lock(&(&ctx->completion_lock)->rlock);
    <Interrupt>
      lock(&(&ctx->completion_lock)->rlock);

    *** DEADLOCK ***

  3 locks held by kcompactd0/151:
   #0:  (&(&mapping->private_lock)->rlock){+.+.-.}, at:  aio_migratepage+0x42/0x1e8
   #1:  (&ctx->ring_lock){+.+.+.}, at:  aio_migratepage+0x5a/0x1e8
   #2:  (&(&ctx->completion_lock)->rlock){+.?.-.}, at:  aio_migratepage+0x156/0x1e8

  stack backtrace:
  CPU: 20 PID: 151 Comm: kcompactd0 Tainted: G        W       4.7.0-rc1+ #52
  Call Trace:
    show_trace+0xea/0xf0
    show_stack+0x72/0xf0
    dump_stack+0x9a/0xd8
    print_usage_bug.part.27+0x2d4/0x2e8
    mark_lock+0x17e/0x758
    mark_held_locks+0xa2/0xd0
    trace_hardirqs_on_caller+0x140/0x1c0
    mem_cgroup_migrate+0x266/0x370
    aio_migratepage+0x16a/0x1e8
    move_to_new_page+0xb0/0x260
    migrate_pages+0x8f4/0x9f0
    compact_zone+0x4dc/0xdc8
    kcompactd_do_work+0x1aa/0x358
    kcompactd+0xba/0x2c8
    kthread+0x10a/0x110
    kernel_thread_starter+0x6/0xc
    kernel_thread_starter+0x0/0xc
  INFO: lockdep is turned off.

Link: http://lkml.kernel.org/r/20160620184158.GO3262@mtj.duckdns.org
Link: http://lkml.kernel.org/g/5767CFE5.7080904@de.ibm.com
Fixes: 74485cf2 ("mm: migrate: consolidate mem_cgroup_migrate() calls")
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We account HugeTLB's shared page table to all processes who share it.
The accounting happens during huge_pmd_share().

If somebody populates pud entry under us, we should decrease pagetable's
refcount and decrease nr_pmds of the process.

By mistake, I increase nr_pmds again in this case.  :-/ It will lead to
"BUG: non-zero nr_pmds on freeing mm: 2" on process' exit.

Let's fix this by increasing nr_pmds only when we're sure that the page
table will be used.

Link: http://lkml.kernel.org/r/20160617122506.GC6534@node.shutemov.name
Fixes: dc6c9a35 ("mm: account pmd page tables to the process")
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Nzhongjiang <zhongjiang@huawei.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit d0834a6c.

After revert of 5c0a85fa ("mm: make faultaround produce old ptes")
faultaround doesn't have dependencies on hardware accessed bit, so let's
revert this one too.

Link: http://lkml.kernel.org/r/1465893750-44080-3-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 5c0a85fa.

The commit causes ~6% regression in unixbench.

Let's revert it for now and consider other solution for reclaim problem
later.

Link: http://lkml.kernel.org/r/1465893750-44080-2-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are different versions of Boris' name and email in the log, and
one typo.  Add his emails in mailmap to have all of his contributions
under the same name/email tuple.

Link: http://lkml.kernel.org/r/20160609130323.27706-2-antoine.tenart@free-electrons.comSigned-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I used "Antoine Ténart" at first but then moved to a name without accent
as this cause some issues from time to time...  Add my email in the
mailmap file to have a consistent shortlog output.

Link: http://lkml.kernel.org/r/20160609130323.27706-1-antoine.tenart@free-electrons.comSigned-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit d0164adc ("mm, page_alloc: distinguish between being unable
to sleep, unwilling to sleep and avoiding waking kswapd") modified
__GFP_WAIT to explicitly identify the difference between atomic callers
and those that were unwilling to sleep.  Later the definition was
removed entirely.

The GFP_RECLAIM_MASK is the set of flags that affect watermark checking
and reclaim behaviour but __GFP_ATOMIC was never added.  Without it,
atomic users of the slab allocator strip the __GFP_ATOMIC flag and
cannot access the page allocator atomic reserves.  This patch addresses
the problem.

The user-visible impact depends on the workload but potentially atomic
allocations unnecessarily fail without this path.

Link: http://lkml.kernel.org/r/20160610093832.GK2527@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Reported-by: NMarcin Wojtas <mw@semihalf.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>	[4.4+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we may put reserved by mempool elements into quarantine via
kasan_kfree().  This is totally wrong since quarantine may really free
these objects.  So when mempool will try to use such element,
use-after-free will happen.  Or mempool may decide that it no longer
need that element and double-free it.

So don't put object into quarantine in kasan_kfree(), just poison it.
Rename kasan_kfree() to kasan_poison_kfree() to respect that.

Also, we shouldn't use kasan_slab_alloc()/kasan_krealloc() in
kasan_unpoison_element() because those functions may update allocation
stacktrace.  This would be wrong for the most of the remove_element call
sites.

(The only call site where we may want to update alloc stacktrace is
 in mempool_alloc(). Kmemleak solves this by calling
 kmemleak_update_trace(), so we could make something like that too.
 But this is out of scope of this patch).

Fixes: 55834c59 ("mm: kasan: initial memory quarantine implementation")
Link: http://lkml.kernel.org/r/575977C3.1010905@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: NKuthonuzo Luruo <kuthonuzo.luruo@hpe.com>
Acked-by: NAlexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the contact info for Muli, clean-up my name, and update the
mailing list to the IOMMU mailing list.

Link: http://lkml.kernel.org/r/1465493059-11840-2-git-send-email-jdmason@kudzu.usSigned-off-by: NJon Mason <jdmason@kudzu.us>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

jbd2_alloc is explicit about its allocation preferences wrt.  the
allocation size.  Sub page allocations go to the slab allocator and
larger are using either the page allocator or vmalloc.  This is all good
but the logic is unnecessarily complex.

1) as per Ted, the vmalloc fallback is a left-over:

 : jbd2_alloc is only passed in the bh->b_size, which can't be PAGE_SIZE, so
 : the code path that calls vmalloc() should never get called.  When we
 : conveted jbd2_alloc() to suppor sub-page size allocations in commit
 : d2eecb03, there was an assumption that it could be called with a size
 : greater than PAGE_SIZE, but that's certaily not true today.

Moreover vmalloc allocation might even lead to a deadlock because the
callers expect GFP_NOFS context while vmalloc is GFP_KERNEL.

2) __GFP_REPEAT for requests <= PAGE_ALLOC_COSTLY_ORDER is ignored
   since the flag was introduced.

Let's simplify the code flow and use the slab allocator for sub-page
requests and the page allocator for others.  Even though order > 0 is
not currently used as per above leave that option open.

Link: http://lkml.kernel.org/r/1464599699-30131-18-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

PGALLOC_GFP uses __GFP_REPEAT but it is only used in pte_alloc_one,
pte_alloc_one_kernel which does order-0 request.  This means that this
flag has never been actually useful here because it has always been used
only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-17-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pgtable_alloc_one uses __GFP_REPEAT flag for L2_USER_PGTABLE_ORDER but
the order is either 0 or 3 if L2_KERNEL_PGTABLE_SHIFT for HPAGE_SHIFT.
This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-16-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

PGALLOC_GFP uses __GFP_REPEAT but {pgd,pmd}_alloc allocate from
{pgd,pmd}_cache but both caches are allocating up to PAGE_SIZE objects.
This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-15-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

page_table_alloc then uses the flag for a single page allocation.  This
means that this flag has never been actually useful here because it has
always been used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-14-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

{pud,pmd}_alloc_one is using __GFP_REPEAT but it always allocates from
pgtable_cache which is initialzed to PAGE_SIZE objects.  This means that
this flag has never been actually useful here because it has always been
used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-13-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

{pud,pmd}_alloc_one are allocating from {PGT,PUD}_CACHE initialized in
pgtable_cache_init which doesn't have larger than sizeof(void *) << 12
size and that fits into !costly allocation request size.

PGALLOC_GFP is used only in radix__pgd_alloc which uses either order-0
or order-4 requests.  The first one doesn't need the flag while the
second does.  Drop __GFP_REPEAT from PGALLOC_GFP and add it for the
order-4 one.

This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-12-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pte_alloc_one{_kernel} allocate PTE_ORDER which is 0.  This means that
this flag has never been actually useful here because it has always been
used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-11-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pmd_alloc_one allocate PMD_ORDER which is 1.  This means that this flag
has never been actually useful here because it has always been used only
for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-10-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pte_alloc_one{_kernel} allocate PTE_ORDER which is 0.  This means that
this flag has never been actually useful here because it has always been
used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-9-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pte_alloc_one{_kernel}, pmd_alloc_one allocate PTE_ORDER resp.
PMD_ORDER but both are not larger than 1.  This means that this flag has
never been actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-8-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pte_alloc_one_kernel uses __get_order_pte but this is obviously always
zero because BITS_FOR_PTE is not larger than 9 yet the page size is
always larger than 4K.  This means that this flag has never been
actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-7-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

{pte,pmd,pud}_alloc_one{_kernel}, late_pgtable_alloc use PGALLOC_GFP for
__get_free_page (aka order-0).

pgd_alloc is slightly more complex because it allocates from pgd_cache
if PGD_SIZE != PAGE_SIZE and PGD_SIZE depends on the configuration
(CONFIG_ARM64_VA_BITS, PAGE_SHIFT and CONFIG_PGTABLE_LEVELS).

As per
config PGTABLE_LEVELS
	int
	default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
	default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
	default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48
	default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48

we should have the following options

  CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:4k size:4096 pages:1
  CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:16k size:16 pages:1
  CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:64k size:512 pages:1
  CONFIG_ARM64_VA_BITS:47 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:16k size:16384 pages:1
  CONFIG_ARM64_VA_BITS:42 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:64k size:65536 pages:1
  CONFIG_ARM64_VA_BITS:39 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:4k size:4096 pages:1
  CONFIG_ARM64_VA_BITS:36 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:16k size:16384 pages:1

All of them fit into a single page (aka order-0).  This means that this
flag has never been actually useful here because it has always been used
only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-6-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

efi_alloc_page_tables uses __GFP_REPEAT but it allocates an order-0
page.  This means that this flag has never been actually useful here
because it has always been used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-4-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMatt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

PGALLOC_GFP uses __GFP_REPEAT but none of the allocation which uses this
flag is for more than order-0.  This means that this flag has never been
actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-3-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the third version of the patchset previously sent [1].  I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree.  I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2.  I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.

Motivation:

While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree.  It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often.  It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.

I think it makes some sense to get rid of them because they are just
making the semantic more unclear.  Please note that GFP_REPEAT is
documented as

* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt

* _might_ fail.  This depends upon the particular VM implementation.
  while !costly requests have basically nofail semantic.  So one could
  reasonably expect that order-0 request with __GFP_REPEAT will not loop
  for ever.  This is not implemented right now though.

I would like to move on with __GFP_REPEAT and define a better semantic
for it.

  $ git grep __GFP_REPEAT origin/master | wc -l
  111
  $ git grep __GFP_REPEAT | wc -l
  36

So we are down to the third after this patch series.  The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests.  This still needs some double checking which I will do later
after all the simple ones are sorted out.

I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them.  Patches should be quite trivial to
review for stupid compile mistakes though.  The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.

[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org

This patch (of 19):

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.  Yet we
have the full kernel tree with its usage for apparently order-0
allocations.  This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).

Let's simply drop __GFP_REPEAT from those places.  This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.

Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When fallocate is interrupted it will undo a range that extends one byte
past its range of allocated pages.  This can corrupt an in-use page by
zeroing out its first byte.  Instead, undo using the inclusive byte
range.

Fixes: 1635f6a7 ("tmpfs: undo fallocation on failure")
Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.comSigned-off-by: NAnthony Romano <anthony.romano@coreos.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Brandon Philips <brandon@ifup.co>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The write at the end of the test to restore nr_hugepages to its previous
value is failing.  This is because it is trying to write the number of
bytes in the char array as opposed to the number of bytes in the string.

Link: http://lkml.kernel.org/r/1465331205-3284-1-git-send-email-mike.kravetz@oracle.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: Eric B Munson <emunson@akamai.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 36324a99 ("oom: clear TIF_MEMDIE after oom_reaper
managed to unmap the address space") changed to use find_lock_task_mm()
for finding a mm_struct to reap, it is guaranteed that mm->mm_users > 0
because find_lock_task_mm() returns a task_struct with ->mm != NULL.
Therefore, we can safely use atomic_inc().

Link: http://lkml.kernel.org/r/1465024759-8074-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit e2fe1456 ("oom_reaper: close race with exiting task") reduced
frequency of needlessly selecting next OOM victim, but was calling
mmput_async() when atomic_inc_not_zero() failed.

Link: http://lkml.kernel.org/r/1464423365-5555-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull UBI/UBIFS fixes from Richard Weinberger:
 "This contains fixes for two critical bugs in UBI and UBIFS:

   - fix the possibility of losing data upon a power cut when UBI tries
     to recover from a write error

   - fix page migration on UBIFS.  It turned out that the default page
     migration function is not suitable for UBIFS"

* tag 'upstream-4.7-rc5' of git://git.infradead.org/linux-ubifs:
  UBIFS: Implement ->migratepage()
  mm: Export migrate_page_move_mapping and migrate_page_copy
  ubi: Make recover_peb power cut aware
  gpio: make library immune to error pointers
  gpio: make sure gpiod_to_irq() returns negative on NULL desc
  gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock

Pull drm fixes from Dave Airlie:
 "This is the drm fixes tree for 4.7-rc5.

  It's a bit larger than normal, due to fixes for production AMD Polaris
  GPUs.  We only merged support for these in 4.7-rc1 so it would be good
  if we got all the fixes into final.  The changes don't hit any other
  hardware.

  Other than the amdgpu Polaris changes:

   - A single fix for atomic modesetting WARN
   - Nouveau fix for when fbdev is disabled
   - i915 fixes for FBC on Haswell and displayport regression
   - Exynos fix for a display panel regression and some other minor changes
   - Atmel fixes for scaling and OF graph interaction
   - Allwiinner build, warning and probing fixes
   - AMD GPU non-polaris fix for num_rbs and some minor fixes

  Also I've just moved house, and my new place is Internet challenged
  due to incompetent incumbent ISPs, hopefully sorted out in a couple of
  weeks, so I might not be too responsive over the next while.  It also
  helps Daniel is on holidays for those couple of weeks as well"

* tag 'drm-fixes-for-v4.7-rc5' of git://people.freedesktop.org/~airlied/linux: (38 commits)
  drm/atomic: Make drm_atomic_legacy_backoff reset crtc->acquire_ctx
  drm/nouveau: fix for disabled fbdev emulation
  drm/i915/fbc: Disable on HSW by default for now
  drm/i915: Revert DisplayPort fast link training feature
  drm/amd/powerplay: enable clock stretch feature for polaris
  drm/amdgpu/gfx8: update golden setting for polaris10
  drm/amd/powerplay: enable avfs feature for polaris
  drm/amdgpu/atombios: add avfs struct for Polaris10/11
  drm/amd/powerplay: add avfs related define for polaris
  drm/amd/powrplay: enable stutter_mode for polaris.
  drm/amd/powerplay: disable UVD SMU handshake for MCLK.
  drm/amd/powerplay: initialize variables which were missed.
  drm/amd/powerplay: enable PowerContainment feature for polaris10/11.
  drm/amd/powerplay: need to notify system bios pcie device ready
  drm/amd/powerplay: fix bug that function parameter was incorect.
  drm/amd/powerplay: fix logic error.
  drm: atmel-hlcdc: Fix OF graph parsing
  drm: atmel-hlcdc: actually disable scaling when no scaling is required
  drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
  drm/amdgpu: precedence bug in amdgpu_device_init()
  ...