- 10 7月, 2015 1 次提交
-
-
由 Aleksey S. Kazantsev 提交于
MV88E6320 and MV88E6321 are largely compatible to MV886352, but are members of a different chip family. Signed-off-by: NAleksey S. Kazantsev <ioctl@yandex.ru> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2015 15 次提交
-
-
由 Scott Feldman 提交于
Implement ndo_change_mtu: on MTU change, reallocate Rx ring bufs and signal HW of new port MTU value. Signed-off-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Tested-by: NSimon Horman <simon.horman@netronome.com> Acked-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vaishali Thakkar 提交于
Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @a@ identifier f, x; @@ -static f(...) { return pci_register_driver(&x); } @b depends on a@ identifier e, a.x; statement S; @@ -static e(...) { -pci_unregister_driver(&x); -DBG_PRINT(INIT_DBG,"S"); - } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_pci_driver; @@ -module_exit(e); +module_pci_driver(x); Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
If we don't have access to the new User GTS (T5+), use the old doorbell mechanism; otherwise use the new BAR2 mechanism. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Updating the driver to read the stats of only available channels. T6 and later has only 2 channels Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
The driver was retrieving the parameters for the bounds of its slice of the L2T from the firmware and then throwing those away and using the entire table. This corrects that problem. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vaishali Thakkar 提交于
Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @a@ identifier f, x; @@ -static f(...) { return pci_register_driver(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { pci_unregister_driver(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_pci_driver; @@ -module_exit(e); +module_pci_driver(x); Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
When packet encapsulation is in use, the MTU needs to be reduced for headroom reservation. The existing code takes the updated MTU value only from the host side. But vSwitch extensions, such as Open vSwitch, require the flexibility to change the MTU to different values from within a guest during the lifecycle of a vNIC, when the encapsulation protocol is changed. The patch supports this kind of MTU changes. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add multiqueue capabilities to ifb netdevice. This removes last bottleneck for ingress when mq qdisc can be used to shard load from multiple RX queues on physical device. Tested: # netem based setup, installed at receiver side ETH=eth0 IFB=ifb10 EST="est 1sec 4sec" # Optional rate estimator RTT_HALF=2ms #REORDER=20us #LOSS="loss 1" TXQ=8 ip link add ifb10 numtxqueues $TXQ type ifb ip link set dev $IFB up tc qdisc add dev $ETH ingress 2>/dev/null tc filter add dev $ETH parent ffff: \ protocol ip u32 match u32 0 0 flowid 1:1 \ action mirred egress redirect dev $IFB tc qdisc del dev $IFB root 2>/dev/null tc qdisc add dev $IFB root handle 1: mq for i in `seq 1 $TXQ` do slot=$( printf %x $(( i )) ) tc qd add dev $IFB parent 1:$slot $EST netem \ limit 100000 delay $RTT_HALF $REORDER $LOSS done lpaa24:~# tc -s -d qd sh dev ifb10 qdisc mq 1: root Sent 316544766 bytes 5265927 pkt (dropped 0, overlimits 0 requeues 0) backlog 98880b 1648p requeues 0 qdisc netem 8002: parent 1:1 limit 100000 delay 2.0ms Sent 39601416 bytes 658721 pkt (dropped 0, overlimits 0 requeues 0) rate 38235Kbit 79657pps backlog 12240b 204p requeues 0 qdisc netem 8003: parent 1:2 limit 100000 delay 2.0ms Sent 39472866 bytes 657227 pkt (dropped 0, overlimits 0 requeues 0) rate 38234Kbit 79655pps backlog 10620b 176p requeues 0 qdisc netem 8004: parent 1:3 limit 100000 delay 2.0ms Sent 39703417 bytes 659699 pkt (dropped 0, overlimits 0 requeues 0) rate 38320Kbit 79831pps backlog 12780b 213p requeues 0 qdisc netem 8005: parent 1:4 limit 100000 delay 2.0ms Sent 39565149 bytes 658011 pkt (dropped 0, overlimits 0 requeues 0) rate 38174Kbit 79530pps backlog 11880b 198p requeues 0 qdisc netem 8006: parent 1:5 limit 100000 delay 2.0ms Sent 39506078 bytes 657354 pkt (dropped 0, overlimits 0 requeues 0) rate 38195Kbit 79571pps backlog 12480b 208p requeues 0 qdisc netem 8007: parent 1:6 limit 100000 delay 2.0ms Sent 39675994 bytes 658849 pkt (dropped 0, overlimits 0 requeues 0) rate 38323Kbit 79838pps backlog 12600b 210p requeues 0 qdisc netem 8008: parent 1:7 limit 100000 delay 2.0ms Sent 39532042 bytes 658367 pkt (dropped 0, overlimits 0 requeues 0) rate 38177Kbit 79536pps backlog 13140b 219p requeues 0 qdisc netem 8009: parent 1:8 limit 100000 delay 2.0ms Sent 39488164 bytes 657705 pkt (dropped 0, overlimits 0 requeues 0) rate 38192Kbit 79568pps backlog 13Kb 222p requeues 0 Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Carol Soto 提交于
Add extra check for total vfs for SRIOV to check if that value is bigger than total vfs in pci SRIOV capabalities. Fix a check and print of the number of maximum vfs that hw can handle. Fix a check and print of the number of maximum vfs per port that driver can handle. Signed-off-by: NCarol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Enable SG support for Zynq SOC family devices. Signed-off-by: NPunnaiah Choudary Kalluri <punnaia@xilinx.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li, Liang Z 提交于
There are two duplicated xenvif_zerocopy_callback() definitions. Remove one of them. Signed-off-by: NLiang Li <liang.z.li@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Mellanox driver has the knowledge if rxhash is a L4 hash, if it receives a non fragmented TCP or UDP frame and NETIF_F_RXCSUM is enabled on netdev. ip_summed value is CHECKSUM_UNNECESSARY in this case. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Ido Shamay <idos@mellanox.com> Acked-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2015 1 次提交
-
-
由 Hariprasad Shenai 提交于
Part of commit 49aa284fe64c4c1 ("cxgb4: Add support for devlog") change introduced a real bug where the Device Log Sequence Numbers are no longer being converted from firmware Big-Endian to local CPU-Endian format. This patch moves all of the translation into the devlog_show() routine. The only endianness code now in devlog_open() is the small loop to find the earliest (lowest Sequence Number) Device Log entry in the circular buffer. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2015 1 次提交
-
-
In enic_poll, we clean tx and rx queues, when low latency busy socket polling is happening, enic_poll will only clean tx queue. After cleaning tx, it should return total budget for re-poll. There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and fails. Unlock napi_poll before unmasking the interrupt. v2: Do not change tx wonk done behaviour. Consider only rx work done for completing napi. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2015 18 次提交
-
-
由 Lars Poeschel 提交于
Add a early_enable module parameter to the omap_wdt that starts the watchdog on module insertion. The default value is 0 which does not start the watchdog - which also does not change the behavior if the parameter is not given. Signed-off-by: NLars Poeschel <poeschel@lemonage.de> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Joerg Roedel 提交于
This function contains the common parts between the initialization of dma_ops_domains and usual protection domains. This also fixes a long-standing bug which was uncovered by recent changes, in which the api_lock was not initialized for dma_ops_domains. Reported-by: NGeorge Wang <xuw2015@gmail.com> Tested-by: NGeorge Wang <xuw2015@gmail.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Vladimir Zapolskiy 提交于
To be consistent with other kernel interface namings, rename of_get_named_gen_pool() to of_gen_pool_get(). In the original function name "_named" suffix references to a device tree property, which contains a phandle to a device and the corresponding device driver is assumed to register a gen_pool object. Due to a weak relation and to avoid any confusion (e.g. in future possible scenario if gen_pool objects are named) the suffix is removed. [sfr@canb.auug.org.au: crypto/marvell/cesa - fix up for of_get_named_gen_pool() rename] Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Zapolskiy 提交于
To be consistent with other genalloc interface namings, rename dev_get_gen_pool() to gen_pool_get(). The original omitted "dev_" prefix is removed, since it points to argument type of the function, and so it does not bring any useful information. [akpm@linux-foundation.org: update arch/arm/mach-socfpga/pm.c] Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mark Brown <broonie@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Kent's email address in MAINTAINERS seems to be invalid. This was his last sign-off address, so use that if appropriate. Fix the S: status entry while there. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NKent Overstreet <kent.overstreet@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: "James E.J. Bottomley" <JBottomley@odin.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: Hariprasad S <hariprasad@chelsio.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: Santosh Raspatur <santosh@chelsio.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Gordon 提交于
do_device_access() takes a separate parameter to indicate the direction of data transfer, which it used to use to select the appropriate function out of sg_pcopy_{to,from}_buffer(). However these two functions now have So this patch makes it bypass these wrappers and call the underlying function sg_copy_buffer() directly; this has the same calling style as do_device_access() i.e. a separate direction-of-transfer parameter and no pointers-to-const, so skipping the wrappers not only eliminates the warning, it also make the code simpler :) [akpm@linux-foundation.org: fix very broken build] Signed-off-by: NDave Gordon <david.s.gordon@intel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Quentin Lambert 提交于
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: NQuentin Lambert <lambert.quentin@gmail.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
This patch initalises all low memory struct pages and 2G of the highest zone on each node during memory initialisation if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set. That config option cannot be set but will be available in a later patch. Parallel initialisation of struct page depends on some features from memory hotplug and it is necessary to alter alter section annotations. Signed-off-by: NMel Gorman <mgorman@suse.de> Tested-by: NNate Zimmer <nzimmer@sgi.com> Tested-by: NWaiman Long <waiman.long@hp.com> Tested-by: NDaniel J Blueman <daniel@numascale.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Simon Guinot 提交于
The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't support TCP/IP checksumming with frame sizes larger than 1600 bytes. This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set to a value greater than 1600 bytes. Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Guinot 提交于
The mvneta driver supports the Ethernet IP found in the Armada 370, XP, 380 and 385 SoCs. Since at least one more hardware feature is available for the Armada XP SoCs then a way to identify them is needed. This patch introduces a new compatible string "marvell,armada-xp-neta". Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Now CONFIG_OF can be enabled on sh: drivers/of/irq.c:472:8: error: redefinition of 'struct intc_desc' include/linux/sh_intc.h:109:8: note: originally defined here As "intc_desc" is used all over the place in sh platform code, while drivers/of/irq.c has a local definition used in a single function, rename the latter by prefixing it with "of_". Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
- 30 6月, 2015 4 次提交
-
-
由 Jeremy Linton 提交于
of_irq_parse_raw() needs to return the correct interrupt controller node when an interrupt-map property doesn't exist. It allows of_irq_parse_raw() to return the node pointer of the interrupt controller, rather than the parent bus. This allows ics_rtas_host_match() to detect that the controller is a legacy 8259 and avoid using xics. This avoids an RTAS assertion/crash during early kernel bootstrapping. Signed-off-by: NJeremy Linton <lintonrjeremy@gmail.com> Reviewed-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Nik Nyby 提交于
This fixes a typo in the IPG_FRAMETOOLONGERRORS constant. Signed-off-by: NNik Nyby <nikolas@gnu.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Markus Elfring 提交于
The free_io_pgtable_ops() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Will Deacon 提交于
Commit 83a60ed8 ("iommu/arm-smmu: fix ARM_SMMU_FEAT_TRANS_OPS condition") accidentally negated the ID0_ATOSNS predicate in the ATOS feature check, causing the driver to attempt ATOS requests on SMMUv2 hardware without the ATOS feature implemented. This patch restores the predicate to the correct value. Cc: <stable@vger.kernel.org> # 4.0+ Reported-by: NVarun Sethi <varun.sethi@freescale.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-