- 11 12月, 2006 28 次提交
-
-
由 Andrew Morton 提交于
The present per-task IO accounting isn't very useful. It simply counts the number of bytes passed into read() and write(). So if a process reads 1MB from an already-cached file, it is accused of having performed 1MB of I/O, which is wrong. (David Wright had some comments on the applicability of the present logical IO accounting: For billing purposes it is useless but for workload analysis it is very useful read_bytes/read_calls average read request size write_bytes/write_calls average write request size read_bytes/read_blocks ie logical/physical can indicate hit rate or thrashing write_bytes/write_blocks ie logical/physical guess since pdflush writes can be missed I often look for logical larger than physical to see filesystem cache problems. And the bytes/cpusec can help find applications that are dominating the cache and causing slow interactive response from page cache contention. I want to find the IO intensive applications and make sure they are doing efficient IO. Thus the acctcms(sysV) or csacms command would give the high IO commands). This patchset adds new accounting which tries to be more accurate. We account for three things: reads: attempt to count the number of bytes which this process really did cause to be fetched from the storage layer. Done at the submit_bio() level, so it is accurate for block-backed filesystems. I also attempt to wire up NFS and CIFS. writes: attempt to count the number of bytes which this process caused to be sent to the storage layer. This is done at page-dirtying time. The big inaccuracy here is truncate. If a process writes 1MB to a file and then deletes the file, it will in fact perform no writeout. But it will have been accounted as having caused 1MB of write. So... cancelled_writes: account the number of bytes which this process caused to not happen, by truncating pagecache. We _could_ just subtract this from the process's `write' accounting. But that means that some processes would be reported to have done negative amounts of write IO, which is silly. So we just report the raw number and punt this decision up to userspace. Now, we _could_ account for writes at the physical I/O level. But - This would require that we track memory-dirtying tasks at the per-page level (would require a new pointer in struct page). - It would mean that IO statistics for a process are usually only available long after that process has exitted. Which means that we probably cannot communicate this info via taskstats. This patch: Wire up the kernel-private data structures and the accessor functions to manipulate them. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Sergei Shtylyov 提交于
Fix the CRC errors in the higher UltraDMA modes with the Promise PDC20268 and newer chips that always occur on non-x86 machines and when there are more than 2 adapters on x86 machines. Fix the overclocking issue for PDC20269 and newer chips that occurs when an UltraDMA/133 capable drive is connected. Here's the summary of changes: - add code to detect the PLL input clock detection and setup it output clock, remove the PowerMac hacks; - replace the macros accessing the indexed regiters with functions, switch to using them where appropriate, gather the PIO/MWDMA/UDMA timings into tables; - rewrite the speedproc() handler to set the drive's transfer mode first, and then override the timing registers set by hardware on UltraDMA/133 chips; - use better criterion for determining higher UltraDMA modes, and add comment concerning the doubtful value of the code enabling IORDY/prefetch; - replace the stupid 'pdcnew_new_' prefixes with mere 'pdcnew_'; - get rid of unneded spaces, parens and type casts, clean up some printk's, add some new lines here and there... This work is loosely based on these former patches by Albert Lee: [1] http://marc.theaimsgroup.com/?l=linux-ide&m=110992442032300 [2] http://marc.theaimsgroup.com/?l=linux-ide&m=110992457729382 [3] http://marc.theaimsgroup.com/?l=linux-ide&m=110992474205555 [4] http://marc.theaimsgroup.com/?l=linux-ide&m=111019224802939 Some PLL clock detection code was backported from his pata_pdc2027x driver... This code has been successfully tested by me on PDC2026[89] chips. I tried to keep this rework as several patches but it made no sense: [2] was largely a modification of the non-working timing override code, [3] by itself extended the overclocking issue to the case of non-UltraDMA/133 drives, and finally, the cleanup patch based on [1] ended up rejected... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Albert Lee <albertcc@tw.ibm.com> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
There are some kernel-only bits in the middle of <linux/futex.h> which should be removed in what we export to userspace. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
kernel.cap-bound uses only OP_SET and OP_AND Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Corey Minyard 提交于
Fix various problems pointed out by Andrew Morton and others: * platform_device_unregister checks for NULL, no need to check here. * Formatting fixes. * Remove big macro and convert to a function. * Use strcmp instead of defining a broken case-insensitive comparison, and make the output parameter info match the case of the input one (change "I/O" to "i/o"). * Return the length instead of 0 from the hotmod parameter handler. * Remove some unused cruft. * The trydefaults parameter only has to do with scanning the "standard" addresses, don't check for that on ACPI. Signed-off-by: NCorey Minyard <cminyard@acm.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Remove all =0 and =NULL from static initializers. They are not needed and removing them saves space in the object files. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alessandro Zummo 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Victor 提交于
The new Atmel AT91SAM9261 and AT91SAM9260 processors do not have the internal RTC peripheral. This RTC driver is therefore AT91RM9200-specific. This patch renames rtc-at91.c to rtc-at91rm9200.c, and changes the name of the configuration option. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Update more I2C drivers that live outside drivers/i2c to understand that using adapter->dev is not The Way. When actually referring to the adapter hardware, adapter->class_dev.dev is the answer. When referring to a device connected to it, client->dev.dev is the answer. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Scott Wood 提交于
Add rtc_merge_alarm(), which can be used by rtc drivers to turn a partially specified alarm expiry (i.e. most significant fields set to -1, as with the RTC_ALM_SET ioctl()) into a fully specified expiry. If the most significant specified field is earlier than the current time, the least significant unspecified field is incremented. Signed-off-by: NScott Wood <scottwood@freescale.com> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
This driver seems to be for a PCI device. drivers/crypto/geode-aes.c:384: warning: implicit declaration of function 'pci_release_regions' drivers/crypto/geode-aes.c:397: warning: implicit declaration of function 'pci_request_regions' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
freezer.h uses task_struct fields so it should include sched.h. CC [M] fs/jfs/jfs_txnmgr.o In file included from fs/jfs/jfs_txnmgr.c:49: include/linux/freezer.h: In function 'frozen': include/linux/freezer.h:9: error: dereferencing pointer to incomplete type include/linux/freezer.h:9: error: 'PF_FROZEN' undeclared (first use in this function) include/linux/freezer.h:9: error: (Each undeclared identifier is reported only once include/linux/freezer.h:9: error: for each function it appears in.) include/linux/freezer.h: In function 'freezing': include/linux/freezer.h:17: error: dereferencing pointer to incomplete type include/linux/freezer.h:17: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'freeze': include/linux/freezer.h:26: error: dereferencing pointer to incomplete type include/linux/freezer.h:26: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'do_not_freeze': include/linux/freezer.h:34: error: dereferencing pointer to incomplete type include/linux/freezer.h:34: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'thaw_process': include/linux/freezer.h:43: error: dereferencing pointer to incomplete type include/linux/freezer.h:43: error: 'PF_FROZEN' undeclared (first use in this function) include/linux/freezer.h:44: warning: implicit declaration of function 'wake_up_process' include/linux/freezer.h: In function 'frozen_process': include/linux/freezer.h:55: error: dereferencing pointer to incomplete type include/linux/freezer.h:55: error: dereferencing pointer to incomplete type include/linux/freezer.h:55: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h:55: error: 'PF_FROZEN' undeclared (first use in this function) fs/jfs/jfs_txnmgr.c: In function 'freezing': include/linux/freezer.h:18: warning: control reaches end of non-void function make[2]: *** [fs/jfs/jfs_txnmgr.o] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
Document how to decode a binary IOCTL number. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Mention the new fault-injection test framework. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Add some kernel coding style comments, mostly pulled from emails by Andrew Morton, Jesper Juhl, and Randy Dunlap. - add paragraph on switch/case indentation (with fixes) - add paragraph on multiple-assignments - add more on Braces - add section on Spaces; add typeof, alignof, & __attribute__ with sizeof; add more on postfix/prefix increment/decrement operators - add paragraph on function breaks in source files; add info on function prototype parameter names - add paragraph on EXPORT_SYMBOL placement - add section on /*-comment style, long-comment style, and data declarations and comments - correct some chapter number references that were missed when chapters were renumbered Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Stephen Street 提交于
Stabilize PIO mode transfers against a range of word sizes and FIFO thresholds and fixes word size setup/override issues. 1) 16 and 32 bit DMA/PIO transfers broken due to timing differences. 2) Potential for bad transfer counts due to transfer size assumptions. 3) Setup function broken is multiple ways. 4) Per transfer bit_per_word changes break DMA setup in pump_tranfers. 5) False positive timeout are not errors. 6) Changes in pxa2xx_spi_chip not effective in calls to setup. 7) Timeout scaling wrong for PXA255 NSSP. 8) Driver leaks memory while busy during unloading. Known issues: SPI_CS_HIGH and SPI_LSB_FIRST settings in struct spi_device are not handled. Testing: This patch has been test against the "random length, random bits/word, random data (verified on loopback) and stepped baud rate by octaves (3.6MHz to 115kHz)" test. It is robust in PIO mode, using any combination of tx and rx thresholds, and also in DMA mode (which internally computes the thresholds). Much thanks to Ned Forrester for exhaustive reviews, fixes and testing. The driver is substantially better for his efforts. Signed-off-by: NStephen Street <stephen@streetfiresound.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
The reverse get function allows the final piece of the switching for the old IDE layer Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Zankel 提交于
This is a long outstanding patch to finally fix the syscall interface. The constants used for the system calls are those we have provided in our libc patches. This patch also fixes the shmbuf and stat structure, and fcntl definitions. Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Zankel 提交于
The Xtensa port contained many header files that were never needed. This rather lengthy patch removes all those files. Unfortunately, there were many dependencies that needed to be updated, so this patch touches quite a few source files. Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Zankel 提交于
Update the architecture specific interrupt handling code for Xtensa to support the new API. Use generic BUG macros in bug.h, and some minor fixes. Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Ramiro Voicu hits the BUG_ON(!pte_none(*pte)) in zeromap_pte_range: kernel bugzilla 7645. Right: read_zero_pagealigned uses down_read of mmap_sem, but another thread's racing read of /dev/zero, or a normal fault, can easily set that pte again, in between zap_page_range and zeromap_page_range getting there. It's been wrong ever since 2.4.3. The simple fix is to use down_write instead, but that would serialize reads of /dev/zero more than at present: perhaps some app would be badly affected. So instead let zeromap_page_range return the error instead of BUG_ON, and read_zero_pagealigned break to the slower clear_user loop in that case - there's no need to optimize for it. Use -EEXIST for when a pte is found: BUG_ON in mmap_zero (the other user of zeromap_page_range), though it really isn't interesting there. And since mmap_zero wants -EAGAIN for out-of-memory, the zeromaps better return that than -ENOMEM. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Ramiro Voicu: <Ramiro.Voicu@cern.ch> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
The as-instr/ld-option need to create temporary files, but create them in the output directory, when compiling external modules. Reformat them a bit and use $(CC) instead of $(AS) as the former is used by kbuild to assemble files. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> Cc: Jan Beulich <jbeulich@novell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: <jpdenheijer@gmail.com> Cc: Horst Schirmeier <horst@schirmeier.com> Cc: Daniel Drake <dsd@gentoo.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Verych 提交于
`make -d help | grep Makefile` shows patterns, where make tries to rebuild included and top makefiles. While `make -rR is now default' commit should fix this, actually, it was just a little janitorial. This fix is aimed to complete cancelling implicit rules. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Don Mullis 提交于
Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: NDon Mullis <dwm@meer.net> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
When CONFIG_PROC_FS=n and CONFIG_PROC_SYSCTL=n but CONFIG_SYSVIPC=y, we get this build error: kernel/built-in.o:(.data+0xc38): undefined reference to `proc_ipc_doulongvec_minmax' kernel/built-in.o:(.data+0xc88): undefined reference to `proc_ipc_doulongvec_minmax' kernel/built-in.o:(.data+0xcd8): undefined reference to `proc_ipc_dointvec' kernel/built-in.o:(.data+0xd28): undefined reference to `proc_ipc_dointvec' kernel/built-in.o:(.data+0xd78): undefined reference to `proc_ipc_dointvec' kernel/built-in.o:(.data+0xdc8): undefined reference to `proc_ipc_dointvec' kernel/built-in.o:(.data+0xe18): undefined reference to `proc_ipc_dointvec' make: *** [vmlinux] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NEric Biederman <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
This driver is an AC97 codec according to its help text. However, if SOUND is disabled, the "select SND_AC97_BUS" still inserts that into the .config file: # # Sound # # CONFIG_SOUND is not set CONFIG_SND_AC97_BUS=m Even if the config software followed dependency chains on selects, we should try to limit usage of "select" to library-type code that is needed (e.g., CRC functions) instead of bus-type support. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Fix ieee80211-softmac compile problem where it's using schedule_work() on a delayed_work struct. Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 12月, 2006 12 次提交
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWS [PATCH] i386: Fix io_apic.c warning [PATCH] i386: export smp_num_siblings for oprofile [PATCH] x86: Work around gcc 4.2 over aggressive optimizer [PATCH] x86: Fix boot hang due to nmi watchdog init code [PATCH] x86: Fix verify_quirk_intel_irqbalance() [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig
-
由 Randy Dunlap 提交于
Since Voyager and Visual WS already define ARCH_SETUP, it looks like PARAVIRT shouldn't be offered for them. In file included from arch/i386/kernel/setup.c:63: include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin= ed In file included from include/asm/msr.h:5, from include/asm/processor.h:17, from include/asm/thread_info.h:16, from include/linux/thread_info.h:21, from include/linux/preempt.h:9, from include/linux/spinlock.h:49, from include/linux/capability.h:45, from include/linux/sched.h:46, from arch/i386/kernel/setup.c:26: include/asm/paravirt.h:163:1: warning: this is the location of the previous= definition In file included from arch/i386/kernel/setup.c:63: include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin= ed In file included from include/asm/msr.h:5, from include/asm/processor.h:17, from include/asm/thread_info.h:16, from include/linux/thread_info.h:21, from include/linux/preempt.h:9, from include/linux/spinlock.h:49, from include/linux/capability.h:45, from include/linux/sched.h:46, from arch/i386/kernel/setup.c:26: include/asm/paravirt.h:163:1: warning: this is the location of the previous= definition Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
-
由 Andi Kleen 提交于
gcc 4.2 warns linux/arch/i386/kernel/io_apic.c: In function ‘create_irq’: linux/arch/i386/kernel/io_apic.c:2488: warning: ‘vector’ may be used uninitialized in this function The warning is false, but somewhat legitimate so work around it. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Randy Dunlap 提交于
oprofile uses smp_num_siblings without testing for CONFIG_X86_HT. I looked at modifying oprofile, but this way is cleaner & simpler and I didn't see a good reason not to just export it when CONFIG_SMP. WARNING: "smp_num_siblings" [arch/i386/oprofile/oprofile.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
The new PDA code uses a dummy _proxy_pda variable to describe memory references to the PDA. It is never referenced in inline assembly, but exists as input/output arguments. gcc 4.2 in some cases can CSE references to this which causes unresolved symbols. Define it to zero to avoid this. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Ravikiran G Thirumalai 提交于
2.6.19 stopped booting (or booted based on build/config) on our x86_64 systems due to a bug introduced in 2.6.19. check_nmi_watchdog schedules an IPI on all cpus to busy wait on a flag, but fails to set the busywait flag if NMI functionality is disabled. This causes the secondary cpus to spin in an endless loop, causing the kernel bootup to hang. Depending upon the build, the busywait flag got overwritten (stack variable) and caused the kernel to bootup on certain builds. Following patch fixes the bug by setting the busywait flag before returning from check_nmi_watchdog. I guess using a stack variable is not good here as the calling function could potentially return while the busy wait loop is still spinning on the flag. AK: I redid the patch significantly to be cleaner Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Fix verify_quirk_intel_irqbalance(). genapic checks should really happen only on affected versions of the E7520/E7320/E7525 based platforms. AK: This should akpm's Coyote SDV Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606 drm: add flag for mapping PCI DMA buffers read-only. drm: fix up irqflags in drm_lock.c drm: i915 updates drm: i915: fix up irqflags arg drm: i915: Only return EBUSY after we've established we need to schedule a new swap. drm: i915: Fix 'sequence has passed' condition in i915_vblank_swap(). drm: i915: Add SAREA fileds for determining which pipe to sync window buffer swaps to. drm: Make handling of dev_priv->vblank_pipe more robust. drm: DRM_I915_VBLANK_SWAP ioctl: Take drm_vblank_seq_type_t instead drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks. drm: Core vsync: Don't clobber target sequence number when scheduling signal. drm: Core vsync: Add flag DRM_VBLANK_NEXTONMISS. drm: Make locked tasklet handling more robust. drm: drm_rmdraw: Declare id and idx as signed so testing for < 0 works as intended. drm: Change first valid DRM drawable ID to be 1 instead of 0. drm: drawable locking + memory management fixes + copyright drm: Add support for interrupt triggered driver callback with lock held to DRM core. drm: Add support for tracking drawable information to core drm: add support for secondary vertical blank interrupt to i915 ...
-
由 David Howells 提交于
Use direct assignment rather than cmpxchg() as the latter is unavailable and unimplementable on some platforms and is actually unnecessary. The use of cmpxchg() was to guard against two possibilities, neither of which can actually occur: (1) The pending flag may have been unset or may be cleared. However, given where it's called, the pending flag is _always_ set. I don't think it can be unset whilst we're in set_wq_data(). Once the work is enqueued to be actually run, the only way off the queue is for it to be actually run. If it's a delayed work item, then the bit can't be cleared by the timer because we haven't started the timer yet. Also, the pending bit can't be cleared by cancelling the delayed work _until_ the work item has had its timer started. (2) The workqueue pointer might change. This can only happen in two cases: (a) The work item has just been queued to actually run, and so we're protected by the appropriate workqueue spinlock. (b) A delayed work item is being queued, and so the timer hasn't been started yet, and so no one else knows about the work item or can access it (the pending bit protects us). Besides, set_wq_data() _sets_ the workqueue pointer unconditionally, so it can be assigned instead. So, replacing the set_wq_data() with a straight assignment would be okay in most cases. The problem is where we end up tangling with test_and_set_bit() emulated using spinlocks, and even then it's not a problem _provided_ test_and_set_bit() doesn't attempt to modify the word if the bit was set. If that's a problem, then a bitops-proofed assignment will be required - equivalent to atomic_set() vs other atomic_xxx() ops. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kars de Jong 提交于
Amiga PCMCIA NE2000 Ethernet: Add missing initialization of dev->irq Signed-off-by: NKars de Jong <jongk@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-