- 21 1月, 2016 6 次提交
-
-
由 Chris Wilson 提交于
Broadwell and later currently use the same unordered command sequence to update the seqno in the HWS status page and then assert the user interrupt. We should apply the w/a from legacy (where we do an mmio read to delay the seqno read after the interrupt), but this is not enough to enforce coherent seqno visibilty on Skylake. Rather than search for the proper post-interrupt seqno barrier, use a strongly ordered command sequence to write the seqno, then assert the user interrupt from the ring. v2: Move around the wa tail dwords to avoid adding duplicate code. v3: Add references, comments on workarounds and bit5 check. References: https://bugs.freedesktop.org/show_bug.cgi?id=93693 Testcase: igt/gem_ring_sync_loop #skl Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453297415-17793-1-git-send-email-mika.kuoppala@intel.com
-
由 Mika Kuoppala 提交于
The capability to detect unclaimed register access was recently introduced for vlv/chv platforms. Apparently there are plenty of unclaimed access on these platforms, resulting in new dmesg warns. But as we are trying to form a beachhead for CI/Bat, all new warns are adding to the noise and thus not desirable at this point in time. Make it so that if in these platforms the automatic arming was responsible for mmio_debug enabling, ignore the warns. If user/dev wants to fix these, he can still do so by i915.mmio_debug=1234. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453285943-24614-1-git-send-email-mika.kuoppala@intel.com
-
由 Daniel Vetter 提交于
We've had this since forever, and's randomly reporting issues and as such causing piles&piles of CI noise. Mika is working on proper debug infrastructure for this, and on fixing this properly. Meanwhile make CI more useful for everyone else. Cc: Mika Kuoppala <mika.kuoppala@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93121Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453233656-12955-1-git-send-email-daniel.vetter@ffwll.ch
-
由 Dave Gordon 提交于
There are a few bits of code which the transformations implemented by the previous patch reveal to be suboptimal, once the notion of a per- ring default context has gone away. So this tidies up the leftovers. It could have been squashed into the previous patch, but that would have made that patch less clearly a simple transformation. In particular, any change which alters the code block structure or indentation has been deferred into this separate patch, because such things tend to make diffs more difficult to read. v4: Rebased Signed-off-by: NDave Gordon <david.s.gordon@intel.com> Reviewed-by: NNick Hoath <nicholas.hoath@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-4-git-send-email-david.s.gordon@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Dave Gordon 提交于
Now that we've eliminated a lot of uses of ring->default_context, we can eliminate the pointer itself. All the engines share the same default intel_context, so we can just keep a single reference to it in the dev_priv structure rather than one in each of the engine[] elements. This make refcounting more sensible too, as we now have a refcount of one for the one pointer, rather than a refcount of one but multiple pointers. From an idea by Chris Wilson. v2: transform an extra instance of ring->default_context introduced by 42f1cae8 drm/i915: Restore inhibiting the load of the default context That patch's commentary includes: v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling The code implementing that now also benefits from the replacement of the multiple (per-ring) pointers to the default context with a single pointer to the unique kernel context. v4: Rebased, remove underused local (Nick Hoath) Signed-off-by: NDave Gordon <david.s.gordon@intel.com> Reviewed-by: NNick Hoath <nicholas.hoath@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-3-git-send-email-david.s.gordon@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Dave Gordon 提交于
There are a number of places where the driver needs a request, but isn't working on behalf of any specific user or in a specific context. At present, we associate them with the per-engine default context. A future patch will abolish those per-engine context pointers; but we can already eliminate a lot of the references to them, just by making the allocator allow NULL as a shorthand for "an appropriate context for this ring", which will mean that the callers don't need to know anything about how the "appropriate context" is found (e.g. per-ring vs per-device, etc). So this patch renames the existing i915_gem_request_alloc(), and makes it local (static inline), and replaces it with a wrapper that provides a default if the context is NULL, and also has a nicer calling convention (doesn't require a pointer to an output parameter). Then we change all callers to use the new convention: OLD: err = i915_gem_request_alloc(ring, user_ctx, &req); if (err) ... NEW: req = i915_gem_request_alloc(ring, user_ctx); if (IS_ERR(req)) ... OLD: err = i915_gem_request_alloc(ring, ring->default_context, &req); if (err) ... NEW: req = i915_gem_request_alloc(ring, NULL); if (IS_ERR(req)) ... v4: Rebased Signed-off-by: NDave Gordon <david.s.gordon@intel.com> Reviewed-by: NNick Hoath <nicholas.hoath@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-2-git-send-email-david.s.gordon@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 20 1月, 2016 7 次提交
-
-
由 Ville Syrjälä 提交于
In this atomic age, we can't trust the plane->fb pointer anymore. It might get update too late. Instead we are supposed to use the plane_state->fb pointer instead. Let's do that in intel_plane_obj_offset() and avoid problems from dereferencing the potentially stale plane->fb pointer. Paulo found this with 'kms_frontbuffer_tracking --show-hidden --run-subtest nop-1p-rte' but it can be reproduced with just plain old kms_setplane. I was too lazy to bisect this, so not sure exactly when it broke. The most obvious candidate commit ce7f1728 ("drm/i915: Fix i915_ggtt_view_equal to handle rotation correctly") was actually still fine, so it must have broken some time after that. Here's the resulting fireworks: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa02d2d9a>] intel_fill_fb_ggtt_view+0x1b/0x15a [i915] PGD 8a5f6067 PUD 8a5f5067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart netconsole mousedev hid_generic psmouse usbhid atkbd libps2 coretemp hwmon efi_pstore intel_rapl iosf_mbi x86_pkg_temp_thermal efivars pcspkr e1000e sdhci_pci ptp pps_core sdhci i2c_i801 mmc_core i2c_hid hid i8042 serio evdev sch_fq_codel ip_tables x_tables ipv6 autofs4 CPU: 1 PID: 260 Comm: kms_plane Not tainted 4.4.0-skl+ #171 Hardware name: Intel Corporation Skylake Client platform/Skylake Y LPDDR3 RVP3, BIOS SKLSE2R1.R00.B104.B00.1511030553 11/03/2015 task: ffff88008bde2d80 ti: ffff88008a6ec000 task.ti: ffff88008a6ec000 RIP: 0010:[<ffffffffa02d2d9a>] [<ffffffffa02d2d9a>] intel_fill_fb_ggtt_view+0x1b/0x15a [i915] RSP: 0018:ffff88008a6efa10 EFLAGS: 00010086 RAX: 0000000000000001 RBX: ffff8801674f4240 RCX: 0000000000000014 RDX: ffff88008a7440c0 RSI: 0000000000000000 RDI: ffff88008a6efa40 RBP: ffff88008a6efa30 R08: ffff88008bde3598 R09: 0000000000000001 R10: ffff88008b782000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88008a7440c0 R14: 0000000000000000 R15: ffff88008a7449c0 FS: 00007fa0c07a28c0(0000) GS:ffff88016ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000008a6ff000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801674f4240 0000000000000000 ffff88008a7440c0 0000000000000000 ffff88008a6efaa0 ffffffffa02daf25 ffffffff814ec80e 0000000000070298 ffff8800850d0000 ffff88008a6efaa0 ffffffffa02c49c2 0000000000000002 Call Trace: [<ffffffffa02daf25>] intel_plane_obj_offset+0x2d/0xa9 [i915] [<ffffffff814ec80e>] ? _raw_spin_unlock_irqrestore+0x4b/0x60 [<ffffffffa02c49c2>] ? gen9_write32+0x2e8/0x3b8 [i915] [<ffffffffa02eecfc>] skl_update_plane+0x203/0x4c5 [i915] [<ffffffffa02ca1ab>] intel_plane_atomic_update+0x53/0x6a [i915] [<ffffffffa02494a4>] drm_atomic_helper_commit_planes_on_crtc+0x142/0x1d5 [drm_kms_helper] [<ffffffffa02de44b>] intel_atomic_commit+0x1262/0x1350 [i915] [<ffffffffa024a0ee>] ? __drm_atomic_helper_crtc_duplicate_state+0x2f/0x41 [drm_kms_helper] [<ffffffffa01ef089>] ? drm_atomic_check_only+0x3e3/0x552 [drm] [<ffffffffa01ef245>] drm_atomic_commit+0x4d/0x52 [drm] [<ffffffffa024996b>] drm_atomic_helper_update_plane+0xcb/0x118 [drm_kms_helper] [<ffffffffa01e42e8>] __setplane_internal+0x1c8/0x224 [drm] [<ffffffffa01e477f>] drm_mode_setplane+0x14e/0x172 [drm] [<ffffffffa01d8117>] drm_ioctl+0x265/0x3ad [drm] [<ffffffffa01e4631>] ? drm_mode_cursor_common+0x158/0x158 [drm] [<ffffffff810d00ab>] ? current_kernel_time64+0x5e/0x98 [<ffffffff810a76ea>] ? trace_hardirqs_on_caller+0x17a/0x196 [<ffffffff8119880f>] do_vfs_ioctl+0x42b/0x4ea [<ffffffff811a2b72>] ? __fget_light+0x4d/0x71 [<ffffffff81198911>] SyS_ioctl+0x43/0x61 [<ffffffff814ed057>] entry_SYSCALL_64_fastpath+0x12/0x6f Cc: drm-intel-fixes@lists.freedesktop.org Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Testcase: igt/kms_plane Reported-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453220597-28973-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Tvrtko Ursulin 提交于
Having this on stack triggers the -Wframe-larger-than=1024 and is not nice to put such big things on the kernel stack anyway. This required a little bit of refactoring to handle the new failure path from vlv_force_pll_on. v2: Corrected some whitespace. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: John Harrison <john.c.harrison@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453217117-26125-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
由 Matt Roper 提交于
This reverts commit 396e33ae. This commit was triggering some FIFO underrun warnings on ILK-IVB platforms (but surprisingly not on HSW/BDW that share more or less the same codepaths). These underruns were caught by the continuous integration (CI) system and could be reproduced consistently when running the basic acceptance tests (BAT) on the affected platforms. Note that this revert will cause a visible regression for some end-users; the "flicker when mouse moves between monitors in X" issue that was reported before this patch was merged will now return. However regressions that are visible to CI have higher priority since they prevent proper testing of future patches on those platforms. Hopefully we'll be able to figure out the cause of the underruns quickly and remerge an improved version of this patch to fix the regression. Cc: Daniel Vetter <daniel@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93640Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NDaniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453232584-8543-1-git-send-email-matthew.d.roper@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
Without the DOC:, kernel-doc confuses the documentation block for something else. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453101588-18008-3-git-send-email-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Apparently accidental or misplaced /** kernel-doc comments, confusing the tool. Turn them to normal comments. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453101588-18008-2-git-send-email-jani.nikula@intel.com
-
由 Jani Nikula 提交于
The comments were never proper kernel-doc, but with SDVO it's not worth the trouble to make them kernel-doc. Just turn them into normal comments. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453101588-18008-1-git-send-email-jani.nikula@intel.com
-
由 Arun Siluvery 提交于
In GuC submission mode, driver has to provide a list of registers to be save/restored during gpu reset, make the max no. of registers value consistent with that of the value defined in FW. If they are not in sync then register save/restore during gpu reset won't work as expected. Cc: Alex Dai <yu.dai@intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453132776-22229-1-git-send-email-arun.siluvery@linux.intel.comReviewed-by: NAlex Dai <yu.dai@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 19 1月, 2016 2 次提交
-
-
由 Chris Wilson 提交于
This is an expected error given the lack of the firmware so emit it at KERN_NOTICE and not KERN_ERROR. Also include the firmware URL in the user facing message so that the user can investigate and fix the issue on their own, and also explain the consequence in plain language. The complete failure message, including the first line from the firmware loader, becomes i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1.bin failed with error -2 i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452706695-13518-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Geliang Tang 提交于
Use hlist_for_each_entry() instead of hlist_for_each() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@163.com> Link: http://patchwork.freedesktop.org/patch/msgid/b80568b2990ebcc145229a132f045e852ac51ad6.1453126187.git.geliangtang@163.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 18 1月, 2016 10 次提交
-
-
由 Ville Syrjälä 提交于
Pass BIT(DRM_ROTATE_0) instead of DRM_ROTATE_0 to skl_update_scaler(). The former is a mask, the latter just the bit number. Fortunately the only thing skl_update_scaler() does with the rotation is check if it's 90/270 degrees or not, and so in this case it would still do the right thing. Cc: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1444917718-28495-1-git-send-email-ville.syrjala@linux.intel.com Fixes: 6156a456 ("drm/i915: skylake primary plane scaling using shared scalers") Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
-
由 Ville Syrjälä 提交于
On SKL+ plane scaling is mutually exclusive with color keying. The code check for this, but during some refactoring the code got changed to also reject primary plane windowing when color keying is used. There is no such restriction in the hardware, so restore the original logic. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 061e4b8d ("drm/i915: clean up atomic plane check functions, v2.") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452883613-28549-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
由 Alex Dai 提交于
During driver unloading, the guc_client created for command submission needs to be released to avoid memory leak. The struct_mutex needs to be held before tearing down GuC. v1: Move i915_guc_submission_disable out of i915_guc_submission_fini and take struct_mutex lock before release GuC client. (Dave Gordon) v2: Add the locking for failure case in guc_fw_fetch. (Dave Gordon) Add i915_guc_submission_fini for failure case in intel_guc_ucode_load. Signed-off-by: NAlex Dai <yu.dai@intel.com> Reviewed-by: NDave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452711710-4505-1-git-send-email-yu.dai@intel.com
-
由 Tvrtko Ursulin 提交于
LRC lifetime is well defined so we can cache the page pointing to the object backing store in the context in order to avoid walking over the object SG page list from the interrupt context without the big lock held. v2: Also cache the mapping. (Chris Wilson) v3: Unmap on the error path. v4: No need to cache the page. (Chris Wilson) v5: No need to dirty the page on unpin. (Chris Wilson) v6: kmap() cannot fail and use kmap_to_page to simplify unpin. (Chris Wilson) Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1452877965-32042-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
由 Tvrtko Ursulin 提交于
Purpose is to avoid calling i915_gem_obj_ggtt_offset from the interrupt context without the big lock held. v2: Renamed gtt_start to gtt_offset. (Daniel Vetter) v3: Cache the VMA instead of address. (Chris Wilson) Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1452870629-13830-2-git-send-email-tvrtko.ursulin@linux.intel.com
-
由 Tvrtko Ursulin 提交于
LRC code was calling GEM API like i915_gem_obj_ggtt_offset from places where the struct_mutex cannot be grabbed (irq handlers). To avoid that this patch caches some interesting bits and values in the engine and context structures. Some usages are also removed where they are not needed like a few asserts which are either impossible or have been checked already during engine initialization. Side benefit is also that interrupt handlers and command submission stop evaluating invariant conditionals, like what Gen we are running on, on every interrupt and every command submitted. This patch deals with logical ring context id and descriptors while subsequent patches will deal with the remaining issues. v2: * Cache the VMA instead of the address. (Chris Wilson) * Incorporate Dave Gordon's good comments and function name. v3: * Extract ctx descriptor template to a function and group functions dealing with ctx descriptor & co together near top of the file. (Dave Gordon) Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452870629-13830-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
由 Tvrtko Ursulin 提交于
No need to call ktime_get_raw_ns twice per unlimited wait and can also elimate a local variable. v2: Added comment about silencing the compiler warning. (Daniel Vetter) Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NDave Gordon <david.s.gordon@intel.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452870672-13901-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
由 Daniel Vetter 提交于
Pull in Dave's drm-next pull request to have a clean base for 4.6. Also, we need the various atomic state extensions Maarten recently created. Conflicts are just adjacent changes that all resolve to nothing in git diff. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next misc i915 fixes all over the place. * tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel: drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long. drm/i915: intel_hpd_init(): Fix suspend/resume reprobing drm/i915: shut up gen8+ SDE irq dmesg noise, again drm/i915: Restore inhibiting the load of the default context drm/i915: Tune down rpm wakelock debug checks drm/i915: Avoid writing relocs with addresses in non-canonical form drm/i915: Move Braswell stop_machine GGTT insertion workaround
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Since your main drm-next pull isn't out of the door yet I figured I might as well flush out drm-misc instead of delaying for 4.6. It's really just random stuff all over, biggest thing probably connector_mask tracking from Maarten. * tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/sysfs: use kobj_to_dev() drm/i915: Init power domains early in driver load drm: Do not set connector->encoder in drivers apple-gmux: Add initial documentation drm: move MODULE_PARM_DESC to other file drm/edid: index CEA/HDMI mode tables using the VIC drm/atomic: Remove drm_atomic_connectors_for_crtc. drm/i915: Update connector_mask during readout, v2. drm: Remove opencoded drm_gem_object_release_handle() drm: Do not set outparam on error during GEM handle allocation drm/docs: more leftovers from the big vtable documentation pile drm/atomic-helper: Reject legacy flips on a disabled pipe drm/atomic: add connector mask to drm_crtc_state. drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2. drm/atomic: Add __drm_atomic_helper_connector_reset, v2. drm/i915: Set connector_state->connector using the helper. drm: Use a normal idr allocation for the obj->name drm: Only bump object-reference count when adding first handle drm: Balance error path for GEM handle allocation ...
-
- 16 1月, 2016 3 次提交
-
-
由 Ville Syrjälä 提交于
rotate_pages() doesn't modify the passed in dma addresses, so make them const. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-4-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Just for clarity set the type for i915_ggtt_view_normal explicitly. While at it fix the indentation fail for i915_ggtt_view_rotated. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-3-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Don't increment obj->framebuffer_references until we know we actually managed to create the framebuffer. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-2-git-send-email-ville.syrjala@linux.intel.com
-
- 15 1月, 2016 6 次提交
-
-
由 Maxime Ripard 提交于
The drm_fbdev_cma_init function always calls the drm_helper_disable_unused_functions. Since it's part of the usual probe process, all the drivers using that helper will end up having their encoder and CRTC disable functions called at probe if their device has not been reported as enabled. This could be fixed by reading out from the registers the current state of the device if it is enabled, but even that will not handle the case where the device is actually disabled. Moreover, the drivers using the atomic modesetting expect that their enable and disable callback to be called when the device is already enabled or disabled (respectively). We can however fix this issue by moving the call to drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the drivers needing it (all the drivers calling drm_fbdev_cma_init and not using the atomic modesetting) explicitly call it. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452785109-6172-14-git-send-email-maxime.ripard@free-electrons.comAcked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Cc: stable@vger.kernel.org Reported-and-tested-by: NDihan Wickremasuriya <nayomal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452695720-7076-1-git-send-email-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Two errors in a single line. The size was read from the wrong offset, and the end index didn't take the five bytes for sequence byte and size of sequence into account. Fix it all, and break up the calculations a bit to make it clearer. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-and-tested-by: NMika Kahola <mika.kahola@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Fixes: 2a33d934 ("drm/i915/bios: add support for MIPI sequence block v3") Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452784327-27258-1-git-send-email-jani.nikula@intel.com
-
由 Francisco Jerez 提交于
We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee that writes performed via the HDC are visible in memory. Fixes an intermittent failure in a Piglit test that writes to a BO from a shader using GL atomic counters (implemented as HDC untyped atomics) and then expects the memory to read back the same value after mapping it on the CPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298Tested-by: NMark Janes <mark.a.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452740379-3194-1-git-send-email-currojerez@riseup.netSigned-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
ilk_program_watermarks() is supposed to merge the active watermarks from all pipes. Thus we need to use the active config too instead of some precomputed stuff. Fixes: aa363136 ("drm/i915: Calculate watermark configuration during atomic check (v2)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452776015-22076-2-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
ilk_compute_pipe_wm() assumes as zeroed pipe_wm structure when it starts. We used to pass such a zeroed struct in, but this got broken when the pipe_wm structure got embedded in the crtc state. To fix it without too much fuzz, we need to resort to a memset(). Fixes: 4e0963c7 ("drm/i915: Calculate pipe watermarks into CRTC state (v3)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452776015-22076-1-git-send-email-ville.syrjala@linux.intel.com
-
- 14 1月, 2016 6 次提交
-
-
由 Jani Nikula 提交于
Add a common function to return "on" or "off" string based on the argument, and drop the local versions of it. This is the onoff version of commit 42a8ca4c Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Aug 27 16:23:30 2015 +0300 drm/i915: add yesno utility function Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452768814-29787-1-git-send-email-jani.nikula@intel.com
-
由 Dave Airlie 提交于
this fixes the build on arm. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This 2nd pull request includes the following, - add configurable plane support and relevant cleanups. - fixup kernel panic issue at drm releasing. - remove unnecessary codes. This has been delayed to resolve a critical issue - which incurrs a kernel panic when driver is released - and review it. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix kernel panic issue at drm releasing drm/exynos: crtc: do not wait for the scanout completion drm/exynos: mixer: properly update all planes on the same vblank event drm/exynos: crtc: rework atomic_{begin,flush} drm/exynos: mixer: unify a check for video-processor window drm/exynos: mixer: also allow ARGB1555 and ARGB4444 drm/exynos: mixer: refactor layer setup drm/exynos: mixer: remove all static blending setup drm/exynos: mixer: set window priority based on zpos drm/exynos: make zpos property configurable drm/exynos: rename zpos to index
-
git://git.pengutronix.de/git/lst/linux由 Dave Airlie 提交于
etnaviv fixes. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: fix workaround for GC500 drm/etnaviv: unlock on error in etnaviv_gem_get_iova()
-
由 Dave Airlie 提交于
Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next new rockchip bits. * 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip: drm: rockchip: Support Synopsys DW MIPI DSI Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver drm/rockchip: return a true clock rate to adjusted_mode
-
由 Thomas Hellstrom 提交于
When the framebuffer is a vmwgfx dma buffer and a proxy surface is created, the vmw_kms_update_proxy() function requires that the proxy surface width and the framebuffer pitch are compatible, otherwise display corruption occurs as seen in gnome-shell/native with software 3D. Since the framebuffer pitch is determined by user-space, allocate a proxy surface the width of which is based on the framebuffer pitch rather than on the framebuffer width. Cc: <stable@vger.kernel.org> Reported-by: NRaphael Hertzog <buxy@kali.org> Tested-by: NMati Aharoni <muts@kali.org> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NBrian Paul <brianp@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-