The previous algorithm for dealing with overlapping concurrent writes
was generating unnecessary warnings for scenarios which could be
legitimate, and did not always handle partially overlapping requests
correctly.  Improve it algorithm as follows:

* While local or remote write requests are in progress, conflicting new
  local write requests will be delayed (commit 82172f7).

* When a conflict between a local and remote write request is detected,
  the node with the discard flag decides how to resolve the conflict: It
  will ask its peer to discard conflicting requests which are fully
  contained in the local request and retry requests which overlap only
  partially.  This involves a protocol change.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

fold
	if (x >= (N+1))
		return 0;
	if (x < N)
		return 0;
into
	if (x != N)
		return 0;
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Before submitting a new local write request, wait for any conflicting
local or remote requests to complete.

We could assume that the new request occurred first and that the
conflicting requests overwrote it (and therefore discard the new
reques), but we know for sure that the new request occurred after the
conflicting requests and so this behavior would we weird.  We would also
end up with the wrong result if the new request is not fully contained
within the conflicting requests.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Nothing in this function accesses mdev->tconn->net_conf, so there is no
need for get_net_conf() / put_net_conf() anymore.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Instead of keeping a separate tree for local and remote write requests
for finding requests and for conflict detection, use the same tree for
both purposes.  Introduce a flag to allow distinguishing the two
possible types of entries in this tree.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

This flag is set when a processes puts itself to sleep to wait for a
conflicting request to complete.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Move drbd_update_congested() to drbd_main.c, and drbd_req_new() and
drbd_req_free() to drbd_req.c: those functions are not used anywhere
else.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

sed -i \
       -e 's/mdev->req_lock/mdev->tconn->req_lock/g' \
       -e 's/mdev->unused_spare_tle/mdev->tconn->unused_spare_tle/g' \
       -e 's/mdev->newest_tle/mdev->tconn->newest_tle/g' \
       -e 's/mdev->oldest_tle/mdev->tconn->oldest_tle/g' \
       -e 's/mdev->out_of_sequence_requests/mdev->tconn->out_of_sequence_requests/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

sed -i \
       -e 's/mdev->agreed_pro_version/mdev->tconn->agreed_pro_version/g' \
       -e 's/mdev->last_received/mdev->tconn->last_received/g' \
       -e 's/mdev->ko_count/mdev->tconn->ko_count/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Patch mostly:

sed -i -e 's/mdev->data/mdev->tconn->data/g' \
       -e 's/mdev->meta/mdev->tconn->meta/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Patch partly generated by:

sed -i -e 's/get_net_conf(mdev)/get_net_conf(mdev->tconn)/g' \
       -e 's/put_net_conf(mdev)/put_net_conf(mdev->tconn)/g' \
       -e 's/get_net_conf(odev)/get_net_conf(odev->tconn)/g' \
       -e 's/put_net_conf(odev)/put_net_conf(odev->tconn)/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Besides moving the struct member, everything else is generated by:

sed -i -e 's/mdev->net_conf/mdev->tconn->net_conf/g' \
       -e 's/odev->net_conf/odev->tconn->net_conf/g' \
       *.[ch]
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

We do not do collision detection for read requests, but we still need to
look up the request objects when we receive a package over the network.
Using the same data structure for read and write requests results in
simpler code once the tl_hash and app_reads_hash tables are removed.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Found these with the help of ispell -l.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

It is no longer sufficient to trigger on local WRITE,
we need to check on (rq_state & RQ_IN_ACT_LOG)
before calling drbd_al_complete_io also in the error path.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

When we receive a barrier ack, we walk the ring list of drbd requests
in the transfer log of the respective epoch, do some housekeeping,
and free those objects.

We tried to keep epochs of mirrored and unmirrored drbd requests
separate, and assert that no local-only requests are present in a
barrier_acked epoch.

It turns out that this has quite a number of corner cases and would
add bloated code without functional benefit.

We now revert the (insufficient) commits
 drbd: Fixed an issue with AHEAD -> SYNC_SOURCE transitions
 drbd: Ensure that an epoch contains only requests of one kind
and instead fix the processing of barrier acks to cope with
a mix of local-only and mirrored requests.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The assert in drbd_req.c:755 forces us to have only requests of
one kind in an epoch. The two kinds we distinguish here are:
local-only or mirrored.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

We may not get from SyncSource to Ahead if we have sent some
P_RS_DATA_REPLY packets to the peer and are waiting for
P_WRITE_ACK.

Again, this is not relevant for proper tuned systems, but makes
sure that the not-tuned system does not get diverging bitmaps.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The FAULT_ACTIVE macro just wraps the drbd_insert_fault macro for no
apparent reason.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

commit e2041475e6ddb081734d161f6421977323f5a9b9
drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmap

Contained a bad chunk that tried to optimize away drbd barriers during
bitmap exchange, but accidentally dropped them for normal mode as well.

Impact: depending on activity log size and access pattern, activity log
extents may not be recycled in time, causeing IO to block indefinetely.

Fix: skip drbd barriers only if there is no connection to send them on,
or the request being completed has not been on the network at all.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

* C_STARTING_SYNC_S, C_STARTING_SYNC_T In these states the bitmap gets
  written to disk. Locking out of app-IO is done by using the
  drbd_queue_bitmap_io() and drbd_bitmap_io() functions these days.
  It is no longer necessary to lock out app-IO based on the connection
  state.
  App-IO that may come in after the BITMAP_IO flag got cleared before the
  state transition to C_SYNC_(SOURCE|TARGET) does not get mirrored, sets
  a bit in the local bitmap, that is already set, therefore changes nothing.

* C_WF_BITMAP_S In this state we send updates (P_OUT_OF_SYNC packets).
  With that we make sure they have the same number of bits when going
  into the C_SYNC_(SOURCE|TARGET) connection state.

* C_UNCONNECTED: The receiver starts, no need to lock out IO.

* C_DISCONNECTING: in drbd_disconnect() we had a wait_event()
  to wait until ap_bio_cnt reaches 0. Removed that.

* C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE
  C_PROTOCOL_ERROR, C_TEAR_DOWN: Same as C_DISCONNECTING

* C_WF_REPORT_PARAMS: IO still possible since that is still
  like C_WF_CONNECTION.

And we do not need to send barriers in C_WF_BITMAP_S connection state.

Allow concurrent accesses to the bitmap when receiving the bitmap.
Everything gets ORed anyways.

A drbd_free_tl_hash() is in after_state_chg_work(). At that point
all the work items of the last connections must have been processed.

Introduced a call to drbd_free_tl_hash() into drbd_free_mdev()
for paranoia reasons.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Since inc_ap_bio() might sleep already
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>