1. 01 8月, 2007 2 次提交
  2. 20 7月, 2007 3 次提交
    • P
      mm: Remove slab destructors from kmem_cache_create(). · 20c2df83
      Paul Mundt 提交于
      Slab destructors were no longer supported after Christoph's
      c59def9f change. They've been
      BUGs for both slab and slub, and slob never supported them
      either.
      
      This rips out support for the dtor pointer from kmem_cache_create()
      completely and fixes up every single callsite in the kernel (there were
      about 224, not including the slab allocator definitions themselves,
      or the documentation references).
      Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      20c2df83
    • N
      mm: fault feedback #1 · d0217ac0
      Nick Piggin 提交于
      Change ->fault prototype.  We now return an int, which contains
      VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
       FAULT_RET_ code tells the VM whether a page was found, whether it has been
      locked, and potentially other things.  This is not quite the way he wanted
      it yet, but that's changed in the next patch (which requires changes to
      arch code).
      
      This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
      that a page is locked which requires filemap_nopage to go away (because we
      can no longer remain backward compatible without that flag), but we were
      going to do that anyway.
      
      struct fault_data is renamed to struct vm_fault as Linus asked. address
      is now a void __user * that we should firmly encourage drivers not to use
      without really good reason.
      
      The page is now returned via a page pointer in the vm_fault struct.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d0217ac0
    • N
      mm: merge populate and nopage into fault (fixes nonlinear) · 54cb8821
      Nick Piggin 提交于
      Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
      the virtual address -> file offset differently from linear mappings.
      
      ->populate is a layering violation because the filesystem/pagecache code
      should need to know anything about the virtual memory mapping.  The hitch here
      is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
       But it is more logical to pass pgoff rather than have the ->nopage function
      calculate it itself anyway (because that's a similar layering violation).
      
      Having the populate handler install the pte itself is likewise a nasty thing
      to be doing.
      
      This patch introduces a new fault handler that replaces ->nopage and
      ->populate and (later) ->nopfn.  Most of the old mechanism is still in place
      so there is a lot of duplication and nice cleanups that can be removed if
      everyone switches over.
      
      The rationale for doing this in the first place is that nonlinear mappings are
      subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
      to duplicate the synchronisation logic rather than just consolidate the two.
      
      After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
      pagecache.  Seems like a fringe functionality anyway.
      
      NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
      users have hit mainline yet.
      
      [akpm@linux-foundation.org: cleanup]
      [randy.dunlap@oracle.com: doc. fixes for readahead]
      [akpm@linux-foundation.org: build fix]
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
      Cc: Mark Fasheh <mark.fasheh@oracle.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      54cb8821
  3. 18 7月, 2007 1 次提交
  4. 17 7月, 2007 1 次提交
  5. 07 7月, 2007 1 次提交
  6. 17 6月, 2007 3 次提交
  7. 17 5月, 2007 1 次提交
    • C
      Remove SLAB_CTOR_CONSTRUCTOR · a35afb83
      Christoph Lameter 提交于
      SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Jens Axboe <jens.axboe@oracle.com>
      Cc: Steven French <sfrench@us.ibm.com>
      Cc: Michael Halcrow <mhalcrow@us.ibm.com>
      Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
      Cc: Miklos Szeredi <miklos@szeredi.hu>
      Cc: Steven Whitehouse <swhiteho@redhat.com>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Dave Kleikamp <shaggy@austin.ibm.com>
      Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
      Cc: "J. Bruce Fields" <bfields@fieldses.org>
      Cc: Anton Altaparmakov <aia21@cantab.net>
      Cc: Mark Fasheh <mark.fasheh@oracle.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Jan Kara <jack@ucw.cz>
      Cc: David Chinner <dgc@sgi.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a35afb83
  8. 11 5月, 2007 1 次提交
  9. 09 5月, 2007 3 次提交
  10. 08 5月, 2007 1 次提交
    • C
      slab allocators: Remove SLAB_DEBUG_INITIAL flag · 50953fe9
      Christoph Lameter 提交于
      I have never seen a use of SLAB_DEBUG_INITIAL.  It is only supported by
      SLAB.
      
      I think its purpose was to have a callback after an object has been freed
      to verify that the state is the constructor state again?  The callback is
      performed before each freeing of an object.
      
      I would think that it is much easier to check the object state manually
      before the free.  That also places the check near the code object
      manipulation of the object.
      
      Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
      compiled with SLAB debugging on.  If there would be code in a constructor
      handling SLAB_DEBUG_INITIAL then it would have to be conditional on
      SLAB_DEBUG otherwise it would just be dead code.  But there is no such code
      in the kernel.  I think SLUB_DEBUG_INITIAL is too problematic to make real
      use of, difficult to understand and there are easier ways to accomplish the
      same effect (i.e.  add debug code before kfree).
      
      There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
      clear in fs inode caches.  Remove the pointless checks (they would even be
      pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.
      
      This is the last slab flag that SLUB did not support.  Remove the check for
      unimplemented flags from SLUB.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      50953fe9
  11. 28 3月, 2007 1 次提交
  12. 07 3月, 2007 1 次提交
  13. 02 3月, 2007 2 次提交
  14. 21 2月, 2007 1 次提交
    • E
      [PATCH] shm: make sysv ipc shared memory use stacked files · bc56bba8
      Eric W. Biederman 提交于
      The current ipc shared memory code runs into several problems because it
      does not quite use files like the rest of the kernel.  With the option of
      backing ipc shared memory with either hugetlbfs or ordinary shared memory
      the problems got worse.  With the added support for ipc namespaces things
      behaved so unexpected that we now have several bad namespace reference
      counting bugs when using what appears at first glance to be a reasonable
      idiom.
      
      So to attack these problems and hopefully make the code more maintainable
      this patch simply uses the files provided by other parts of the kernel and
      builds it's own files out of them.  The shm files are allocated in do_shmat
      and freed when their reference count drops to zero with their last unmap.
      The file and vm operations that we don't want to implement or we don't
      implement completely we just delegate to the operations of our backing
      file.
      
      This means that we now get an accurate shm_nattch count for we have a
      hugetlbfs inode for backing store, and the shm accounting of last attach
      and last detach time work as well.
      
      This means that getting a reference to the ipc namespace when we create the
      file and dropping the referenece in the release method is now safe and
      correct.
      
      This means we no longer need a special case for clearing VM_MAYWRITE
      as our file descriptor now only has write permissions when we have
      requested write access when calling shmat.  Although VM_SHARED is now
      cleared as well which I believe is harmless and is mostly likely a
      minor bug fix.
      
      By using the same set of operations for both the hugetlb case and regular
      shared memory case shmdt is not simplified and made slightly more correct
      as now the test "vma->vm_ops == &shm_vm_ops" is 100% accurate in spotting
      all shared memory regions generated from sysvipc shared memory.
      Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
      Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bc56bba8
  15. 15 2月, 2007 2 次提交
  16. 13 2月, 2007 3 次提交
  17. 12 2月, 2007 1 次提交
  18. 24 1月, 2007 1 次提交
  19. 14 12月, 2006 1 次提交
    • R
      [PATCH] getting rid of all casts of k[cmz]alloc() calls · 5cbded58
      Robert P. J. Day 提交于
      Run this:
      
      	#!/bin/sh
      	for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
      	  echo "De-casting $f..."
      	  perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
      	done
      
      And then go through and reinstate those cases where code is casting pointers
      to non-pointers.
      
      And then drop a few hunks which conflicted with outstanding work.
      
      Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Jeff Dike <jdike@addtoit.com>
      Cc: Greg KH <greg@kroah.com>
      Cc: Jens Axboe <jens.axboe@oracle.com>
      Cc: Paul Fulghum <paulkf@microgate.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Cc: Karsten Keil <kkeil@suse.de>
      Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
      Cc: Jeff Garzik <jeff@garzik.org>
      Cc: James Bottomley <James.Bottomley@steeleye.com>
      Cc: Ian Kent <raven@themaw.net>
      Cc: Steven French <sfrench@us.ibm.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Neil Brown <neilb@cse.unsw.edu.au>
      Cc: Jaroslav Kysela <perex@suse.cz>
      Cc: Takashi Iwai <tiwai@suse.de>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      5cbded58
  20. 09 12月, 2006 1 次提交
  21. 08 12月, 2006 4 次提交
  22. 22 11月, 2006 1 次提交
    • D
      WorkStruct: Pass the work_struct pointer instead of context data · 65f27f38
      David Howells 提交于
      Pass the work_struct pointer to the work function rather than context data.
      The work function can use container_of() to work out the data.
      
      For the cases where the container of the work_struct may go away the moment the
      pending bit is cleared, it is made possible to defer the release of the
      structure by deferring the clearing of the pending bit.
      
      To make this work, an extra flag is introduced into the management side of the
      work_struct.  This governs auto-release of the structure upon execution.
      
      Ordinarily, the work queue executor would release the work_struct for further
      scheduling or deallocation by clearing the pending bit prior to jumping to the
      work function.  This means that, unless the driver makes some guarantee itself
      that the work_struct won't go away, the work function may not access anything
      else in the work_struct or its container lest they be deallocated..  This is a
      problem if the auxiliary data is taken away (as done by the last patch).
      
      However, if the pending bit is *not* cleared before jumping to the work
      function, then the work function *may* access the work_struct and its container
      with no problems.  But then the work function must itself release the
      work_struct by calling work_release().
      
      In most cases, automatic release is fine, so this is the default.  Special
      initiators exist for the non-auto-release case (ending in _NAR).
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      65f27f38
  23. 05 11月, 2006 1 次提交
    • L
      Revert unintentional "volatile" changes in ipc/msg.c · 80491eb9
      Linus Torvalds 提交于
      Commit 5a06a363 ("[PATCH] ipc/msg.c:
      clean up coding style") breaks fakeroot on Alpha (variously hangs or
      oopses), according to a report by Falk Hueffner.
      
      The fact that the code seems to rely on compiler access ordering through
      the use of "volatile" is a pretty certain sign that the code has locking
      problems, and we should fix those properly and then remove the whole
      "volatile" entirely.
      
      But in the meantime, the movement of "volatile" was unintentional, and
      should be reverted.
      
      Cc: Falk Hueffner <falk@debian.org>
      Cc: Andrew Morton <akpm@osdl.org>
      Acked-by: NIngo Molnar <mingo@elte.hu>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      80491eb9
  24. 04 11月, 2006 1 次提交
    • P
      [PATCH] Fix ipc entries removal · c7e12b83
      Pavel Emelianov 提交于
      Fix two issuses related to ipc_ids->entries freeing.
      
      1. When freeing ipc namespace we need to free entries allocated
         with ipc_init_ids().
      
      2. When removing old entries in grow_ary() ipc_rcu_putref()
         may be called on entries set to &ids->nullentry earlier in
         ipc_init_ids().
         This is almost impossible without namespaces, but with
         them this situation becomes possible.
      
      Found during OpenVZ testing after obvious leaks in beancounters.
      Signed-off-by: NPavel Emelianov <xemul@openvz.org>
      Cc: Kirill Korotaev <dev@openvz.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      c7e12b83
  25. 04 10月, 2006 2 次提交