- 20 11月, 2008 40 次提交
-
-
由 Wang Chen 提交于
1. Make device driver to allocate memory for netdev. 2. Convert all directly reference of netdev->priv to netdev_priv(). Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
This patch is to kill directly reference of netdev->priv too. Because the private data needs special memory: lower 16MB DMA. alloc_etherdev() can not do this work. So we can't use netdev->priv to point to netdev's private data. Use netdev->ml_priv instead. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
1. Use netdev_priv(dev) to replace dev->priv. 2. Alloc netdev's private data by alloc_netdev(). Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steve Glendinning 提交于
LAN9500 supports tx checksum offload, which slightly decreases cpu utilisation. The benefit isn't very large because we still require the skb to be linearized, but it does save a few cycles. This patch adds support for it, and enables it by default. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Randy Dunlap found that SFC_MTD was selected when sfc was built-in and the MTD core was a module. Don't allow that combination. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The use of xchg() hasn't been necessary since 2.2.something when proper locking was added to packet schedulers. In the case of classifiers they mostly weren't even necessary before that since they're mainly used to assign a NULL pointer to the filter root in the ->destroy path; the root is destroyed immediately after that. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The use of xchg() hasn't been necessary since 2.2.something when proper locking was added to packet schedulers. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add classful DRR scheduler as a more flexible replacement for SFQ. The main difference to the algorithm described in "Efficient Fair Queueing using Deficit Round Robin" is that this implementation doesn't drop packets from the longest queue on overrun because its classful and limits are handled by each individual child qdisc. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
A netlink attribute padding of zero triggers this sparse warning: include/linux/netlink.h:245:8: warning: memset with byte count of 0 Avoid the memset when the size parameter is constant and requires no padding. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
This patch is to kill directly reference of netdev->priv too. Because the private data should be allocated in DMA area, alloc_etherdev() can't satisfy this needs. Use netdev->ml_priv to point to lance_private. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Currently, if multiple unicast addresses are programmed into a mv643xx_eth interface, the core networking will resort to enabling promiscuous mode on the interface, as mv643xx_eth does not implement ->set_rx_mode(). This patch switches mv643xx_eth over from ->set_multicast_list() to ->set_rx_mode(), and implements support for secondary unicast addresses. The hardware can handle multiple unicast addresses as long as their first 11 nibbles are the same (i.e. are of the form xx:xx:xx:xx:xx:xy where the x part is the same for all addresses), so if that is the case, we use that mode. If it's not the case, we enable unicast promiscuous mode in the hardware, which is slightly better than enabling promiscuous mode for multicasts as well, which is what would happen before. While we are at it, change the programming sequence so that we don't clear all filter bits first, so we don't lose all incoming packets while the filter is being reprogrammed. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Since txq_alloc_desc_index() is a very simple function, and since descriptor ring index handling for transmit reclaim, receive processing and receive refill is already handled inline as well, inline txq_alloc_desc_index() into its two call sites. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
The mv643xx_eth driver uses the rdl()/wrl() macros to read and write hardware registers. Per-port registers are accessed in the following way: #define PORT_STATUS(p) (0x0444 + ((p) << 10)) [...] static inline u32 rdl(struct mv643xx_eth_private *mp, int offset) { return readl(mp->shared->base + offset); } [...] port_status = rdl(mp, PORT_STATUS(mp->port_num)); By giving the per-port 'struct mv643xx_eth_private' its own 'void __iomem *base' pointer that points to the per-port register area, we can get rid of both the double indirection and the << 10 that is done for every per-port register access -- this patch does that. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Fix up a couple of coding style issues caught by checkpatch. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Fixes sparse warnings: net/ipv4/ip_sockglue.c:146:15: warning: incorrect type in assignment (different base types) net/ipv4/ip_sockglue.c:146:15: expected restricted __be16 [assigned] [usertype] sin_port net/ipv4/ip_sockglue.c:146:15: got unsigned short [unsigned] [short] [usertype] <noident> net/ipv4/ip_sockglue.c:130:6: warning: symbol 'ip_cmsg_recv_dstaddr' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brice Goglin 提交于
Removes the use of a hardcoded sram_size, determine string_spec location from the MCP header instead. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brice Goglin 提交于
Properly attribute transmit and receive drops by incrementing the per-slice counter. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
From: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Since all the memory, which pointed by netdev->priv, are allocated in advance instead of by alloc_netdev(). Use netdev->ml_priv to point to those memory. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
1. When alloc_etherdev(), no memory be allocated to netdev->priv. 2. And it's need to get a whole page for priv. For these reasons, use netdev->ml_priv to point to the page is the best method to convert directly reference of netdev->priv. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
SKF_AD_NLATTR allows us to find the first matching attribute in a stream of netlink attributes from one offset to the end of the netlink message. This is not suitable to look for a specific matching inside a set of nested attributes. For example, in ctnetlink messages, if we look for the CTA_V6_SRC attribute in a message that talks about an IPv4 connection, SKF_AD_NLATTR returns the offset of CTA_STATUS which has the same value of CTA_V6_SRC but outside the nest. To differenciate CTA_STATUS and CTA_V6_SRC, we would have to make assumptions on the size of the attribute and the usual offset, resulting in horrible BSF code. This patch adds SKF_AD_NLATTR_NEST, which is a variant of SKF_AD_NLATTR, that looks for an attribute inside the limits of a nested attributes, but not further. This patch validates that we have enough room to look for the nested attributes - based on a suggestion from Patrick McHardy. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
When suspending the device the ring structure is freed which causes it to loose track of the count. To resolve this we need to move the ring count outside of the ring structure and store it in the adapter struct. In addition to resolving the suspend/resume issue this patch also addresses issues seen in the event of memory allocation errors causing uneven ring sizes on multiple queues. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This update replaces the xchg calls that were added with a pair of assignments as there is no need for the xchg calls and they were found to cause issues on some architectures. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch adds the 82576 device to the description for igb in Kconfig. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This patch prepares RCU migration of listening_hash table for TCP/DCCP protocols. listening_hash table being small (32 slots per protocol), we add a spinlock for each slot, instead of a single rwlock for whole table. This should reduce hold time of readers, and writers concurrency. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only (give me hw!) Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert to new network device ops interface. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert to new network device ops interface. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert to new network device ops interface. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-