I2O: cleanup - remove i2o_device_class

I2O devices reside on their own bus so there should be no reason
to also have i2c_device class that mirros i2o bus.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lindent run and replaced printk() through the corresponding osm_*() function
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes:
 - Added header "core.h" for i2o_core.ko internal definitions
 - More sparse fixes
 - Changed display of TID's in sysfs attributes from XXX to 0xXXX
 - Use the right functions for accessing I/O and normal memory
 - Removed error handling of SCSI device errors and let the SCSI layer
   take care of it
 - Added new device / removed device handling to SCSI-OSM
 - Make status access volatile
 - Cleaned up activation of I2O controller
 - Removed unnecessary wmb() and rmb() calls
 - Use own struct i2o_io for I/O memory instead of struct i2o_dma
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes:
 - Added Bus-OSM which could be used by user space programs to reset a
   channel on the controller
 - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
   move those to its own file
 - Added sysfs attribute for firmware read and write access for I2O
   controllers
 - Added special handling of firmware read and write access for Adaptec
   controllers
 - Added vendor id and product id as sysfs-attribute to Executive classes
 - Added automatic notification of LCT change handling to Exec-OSM
 - Added flushing function to Block-OSM for later barrier implementation
 - Use PRIVATE messages for Block access on Adaptec controllers, which are
   faster then BLOCK class access
 - Cleaned up support for Promise controller
 - New messages are now detected using the IRQ status register as
   suggested by the I2O spec
 - Added i2o_dma_high() and i2o_dma_low() functions
 - Added facility for SG tablesize calculation when using 32-bit and
   64-bit DMA addresses
 - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
   SG list for 32-bit as well as 64-bit DMA addresses
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes:

 - Removed unnecessary checking of NULL before calling kfree()
 - Make some functions static
 - Changed pr_debug() into osm_debug()
 - Use i2o_msg_in_to_virt() for getting a pointer to the message frame
 - Cleaned up some comments
 - Changed some le32_to_cpu() into readl() where necessary
 - Make error messages of OSM's look the same
 - Cleaned up error handling in i2o_block_end_request()
 - Removed unused error handling of failed messages in Block-OSM, which
   are not allowed by the I2O spec
 - Corrected the blocksize detection in i2o_block
 - Added hrt and lct sysfs-attribute to controller
 - Call done() function in SCSI-OSM after freeing DMA buffers
 - Removed unneeded variable for message size calculation in
   i2o_scsi_queuecommand()
 - Make some changes to remove sparse warnings
 - Reordered some functions
 - Cleaned up controller initialization
 - Replaced some magic numbers by defines
 - Removed unnecessary dma_sync_single_for_cpu() call on coherent DMA
 - Removed some unused fields in i2o_controller and removed some unused
   functions
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes:

 - Fixed sysfs bug where user and parent links where added to the I2O
   device itself
 - Fixed bug when calculating TID for the event handler and cleaned up the
   workflow of i2o_driver_dispatch()
 - Fixed oops when no I2O device could be found for an event delivered to
   Exec-OSM
 - Fixed initialization of spinlock in Exec-OSM
 - Fixed memory leak in i2o_cfg_passthru() and i2o_cfg_passthru()
 - Removed MTRR support
 - Added PCI ID of Promise SX6000 with firmware >= 1.20.x.x
 - Turn of caching for ioremapped memory of in_queue
 - Added initialization sequence for Promise controllers
 - Moved definition of u8 / u16 / u32 for raidutils before first use
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!