- 04 7月, 2012 6 次提交
-
-
由 Heiko Carstens 提交于
Only if the sensed cpu is not running a status is stored, which is reflected by condition code 1. If the cpu is running, condition code 0 should be returned. Just the opposite of what the code is doing. Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Heiko Carstens 提交于
The smp and the kvm code have different defines for the sigp order codes. Let's just have a single place where these are defined. Also move the sigp condition code and sigp cpu status bits to the new sigp.h header file. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Heiko Carstens 提交于
condition code "status stored" for sigp sense running always implies that only the "not running" status bit is set. Therefore no need to check if it is set. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marc Zyngier 提交于
In order to avoid compilation failure when KVM is not compiled in, guard the mmu_notifier specific sections with both CONFIG_MMU_NOTIFIER and KVM_ARCH_WANT_MMU_NOTIFIER, like it is being done in the rest of the KVM code. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Guo Chao 提交于
Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Michael S. Tsirkin 提交于
On UP i386, when APIC is disabled # CONFIG_X86_UP_APIC is not set # CONFIG_PCI_IOAPIC is not set code looking at apicdrivers never has any effect but it still gets compiled in. In particular, this causes build failures with kvm, but it generally bloats the kernel unnecessarily. Fix by defining both __apicdrivers and __apicdrivers_end to be NULL when CONFIG_X86_LOCAL_APIC is unset: I verified that as the result any loop scanning __apicdrivers gets optimized out by the compiler. Warning: a .config with apic disabled doesn't seem to boot for me (even without this patch). Still verifying why, meanwhile this patch is compile-tested only. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NH. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 25 6月, 2012 8 次提交
-
-
由 Michael S. Tsirkin 提交于
Implementation of PV EOI using shared memory. This reduces the number of exits an interrupt causes as much as by half. The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. We set it before injecting an interrupt and clear before injecting a nested one. Guest tests it using a test and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. There's a new MSR to set the address of said register in guest memory. Otherwise not much changed: - Guest EOI is not required - Register is tested & ISR is automatically cleared on exit For testing results see description of previous patch 'kvm_para: guest side for eoi avoidance'. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
Each time we need to cancel injection we invoke same code (cancel_injection callback). Move it towards the end of function using the familiar goto on error pattern. Will make it easier to do more cleanups for PV EOI. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
Commit eb0dc6d0368072236dcd086d7fdc17fd3c4574d4 introduced apic attention bitmask but kvm still syncs lapic unconditionally. As that commit suggested and in anticipation of adding more attention bits, only sync lapic if(apic_attention). Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
Document the new EOI MSR. Couldn't decide whether this change belongs conceptually on guest or host side, so a separate patch. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
__test_and_clear_bit is actually atomic with respect to the local CPU. Add a note saying that KVM on x86 relies on this behaviour so people don't accidentaly break it. Also warn not to rely on this in portable code. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
We perform ISR lookups twice: during interrupt injection and on EOI. Typical workloads only have a single bit set there. So we can avoid ISR scans by 1. counting bits as we set/clear them in ISR 2. on set, caching the injected vector number 3. on clear, invalidating the cache The real purpose of this is enabling PV EOI which needs to quickly validate the vector. But non PV guests also benefit: with this patch, and without interrupt nesting, apic_find_highest_isr will always return immediately without scanning ISR. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 19 6月, 2012 1 次提交
-
-
由 Takuya Yoshikawa 提交于
The following commit did not care about the error handling path: commit c1a7b32a KVM: Avoid wasting pages for small lpage_info arrays If memory allocation fails, vfree() will be called with the address returned by kzalloc(). This patch fixes this issue. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 18 6月, 2012 2 次提交
-
-
由 Christoffer Dall 提交于
This is a preparatory patch for the KVM/ARM implementation. KVM/ARM will use the KVM_IRQ_LINE ioctl, which is currently conditional on __KVM_HAVE_IOAPIC, but ARM obviously doesn't have any IOAPIC support and we need a separate define. Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marc Zyngier 提交于
The KVM code sometimes uses CONFIG_HAVE_KVM_IRQCHIP to protect code that is related to IRQ routing, which not all in-kernel irqchips may support. Use KVM_CAP_IRQ_ROUTING instead. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 14 6月, 2012 4 次提交
-
-
由 Cornelia Huck 提交于
The list of exit reasons for the kvm_userspace_exit event was missing recent additions; bring it into sync again. Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Heinz Graalfs 提交于
For processing under KVM it is required to detect the actual SCLP console type in order to set it as preferred console. Signed-off-by: NHeinz Graalfs <graalfs@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Christian Borntraeger 提交于
The initial cpu reset sets the cpu in the stopped state. Several places check for the cpu state (e.g. sigp set prefix) and not setting the STOPPED state triggered errors with newer guest kernels after reboot. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xudong Hao 提交于
EPT Dirty bit use bit 9 as Intel SDM definition, to avoid conflict, change PT_FIRST_AVAIL_BITS_SHIFT to 10. Signed-off-by: NXudong Hao <xudong.hao@intel.com> Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 12 6月, 2012 1 次提交
-
-
由 Takuya Yoshikawa 提交于
Size is not needed to return one from pre-allocated objects. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 06 6月, 2012 4 次提交
-
-
git://github.com/agraf/linux-2.6由 Avi Kivity 提交于
Alex says: "Changes this time include: - Generalize KVM_GUEST support to overall ePAPR code - Fix reset for Book3S HV - Fix machine check deferral when CONFIG_KVM_GUEST=y - Add support for BookE register DECAR" * 'for-upstream' of git://github.com/agraf/linux-2.6: KVM: PPC: Not optimizing MSR_CE and MSR_ME with paravirt. KVM: PPC: booke: Added DECAR support KVM: PPC: Book3S HV: Make the guest hash table size configurable KVM: PPC: Factor out guest epapr initialization Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
I see this in 3.5-rc1: arch/x86/kvm/mmu.c: In function ‘kvm_test_age_rmapp’: arch/x86/kvm/mmu.c:1271: warning: ‘iter.desc’ may be used uninitialized in this function The line in question was introduced by commit 1e3f42f0 static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp, unsigned long data) { - u64 *spte; + u64 *sptep; + struct rmap_iterator iter; <- line 1271 int young = 0; /* The reason I think is that the compiler assumes that the rmap value could be 0, so static u64 *rmap_get_first(unsigned long rmap, struct rmap_iterator *iter) { if (!rmap) return NULL; if (!(rmap & 1)) { iter->desc = NULL; return (u64 *)rmap; } iter->desc = (struct pte_list_desc *)(rmap & ~1ul); iter->pos = 0; return iter->desc->sptes[iter->pos]; } will not initialize iter.desc, but the compiler isn't smart enough to see that for (sptep = rmap_get_first(*rmapp, &iter); sptep; sptep = rmap_get_next(&iter)) { will immediately exit in this case. I checked by adding if (!*rmapp) goto out; on top which is clearly equivalent but disables the warning. This patch uses uninitialized_var to disable the warning without increasing code size. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christoffer Dall 提交于
Introduces a couple of print functions, which are essentially wrappers around standard printk functions, with a KVM: prefix. Functions introduced or modified are: - kvm_err(fmt, ...) - kvm_info(fmt, ...) - kvm_debug(fmt, ...) - kvm_pr_unimpl(fmt, ...) - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...) Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Borntraeger 提交于
Since Carsten is now working on a different project, Cornelia will work as the 2nd s390/kvm maintainer. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> CC: Carsten Otte <cotte@de.ibm.com> CC: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 05 6月, 2012 14 次提交
-
-
由 Orit Wasserman 提交于
For example migration between Westmere and Nehelem hosts, caught in big real mode. The code that fixes the segments for real mode guest was moved from enter_rmode to vmx_set_segments. enter_rmode calls vmx_set_segments for each segment. Signed-off-by: NOrit Wasserman <owasserm@rehdat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
mmu_shrink() needlessly iterates over all VMs even though it will not attempt to free mmu pages from more than one on them. Fix that and also check used mmu pages count outside of VM lock to skip inactive VMs faster. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Practically all patches to ia64 KVM are build fixes; numerous warnings remain; the last patch from the maintainer was committed more than three years ago. It is clear that no one is using this thing. Mark as BROKEN to ensure people don't get hit by pointless build problems. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xudong Hao 提交于
Signed-off-by: NHaitao Shan <haitao.shan@intel.com> Signed-off-by: NXudong Hao <xudong.hao@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xudong Hao 提交于
In EPT page structure entry, Enable EPT A/D bits if processor supported. Signed-off-by: NHaitao Shan <haitao.shan@intel.com> Signed-off-by: NXudong Hao <xudong.hao@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xudong Hao 提交于
Add kernel parameter to control A/D bits support, it's on by default. Signed-off-by: NHaitao Shan <haitao.shan@intel.com> Signed-off-by: NXudong Hao <xudong.hao@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xudong Hao 提交于
Signed-off-by: NHaitao Shan <haitao.shan@intel.com> Signed-off-by: NXudong Hao <xudong.hao@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
lpage_info is created for each large level even when the memory slot is not for RAM. This means that when we add one slot for a PCI device, we end up allocating at least KVM_NR_PAGE_SIZES - 1 pages by vmalloc(). To make things worse, there is an increasing number of devices which would result in more pages being wasted this way. This patch mitigates this problem by using kvm_kvzalloc(). Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
Will be used for lpage_info allocation later. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/{signal,vfs}由 Linus Torvalds 提交于
Pull signal and vfs compile breakage fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: fixups for signal breakage * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: nommu: fix compilation of nommu.c
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Move get_next_mid to ops struct CIFS: Make accessing is_valid_oplock/dump_detail ops struct field safe CIFS: Improve identation in cifs_unlock_range CIFS: Fix possible wrong memory allocation
-
由 Al Viro 提交于
Obvious brainos spotted by Geert. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Greg Ungerer 提交于
Compiling 3.5-rc1 for nommu targets gives: CC mm/nommu.o mm/nommu.c: In function ‘sys_mmap_pgoff’: mm/nommu.c:1489:2: error: ‘ret’ undeclared (first use in this function) mm/nommu.c:1489:2: note: each undeclared identifier is reported only once for each function it appears in It is trivially fixed by replacing 'ret' with the local variable that is already defined for the return value 'retval'. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm由 Linus Torvalds 提交于
Pull frontswap feature from Konrad Rzeszutek Wilk: "Frontswap provides a "transcendent memory" interface for swap pages. In some environments, dramatic performance savings may be obtained because swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk. This tag provides the basic infrastructure along with some changes to the existing backends." Fix up trivial conflict in mm/Makefile due to removal of swap token code changing a line next to the new frontswap entry. This pull request came in before the merge window even opened, it got delayed to after the merge window by me just wanting to make sure it had actual users. Apparently IBM is using this on their embedded side, and Jan Beulich says that it's already made available for SLES and OpenSUSE users. Also acked by Rik van Riel, and Konrad points to other people liking it too. So in it goes. By Dan Magenheimer (4) and Konrad Rzeszutek Wilk (2) via Konrad Rzeszutek Wilk * tag 'stable/frontswap.v16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm: frontswap: s/put_page/store/g s/get_page/load MAINTAINER: Add myself for the frontswap API mm: frontswap: config and doc files mm: frontswap: core frontswap functionality mm: frontswap: core swap subsystem hooks and headers mm: frontswap: add frontswap header file
-