- 26 2月, 2010 1 次提交
-
-
由 Dominik Brodowski 提交于
Currently, only those mem resources are validated which are already registered at the time the first PCMCIA card is inserted. As we can only validate resources immediately after card insert, store "registered" mem resources in mem_db, and only upon validation move them to mem_db_valid. When allocationg mem resources, mem_db_valid is then preferred to mem_db. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 24 2月, 2010 1 次提交
-
-
由 Bjorn Helgaas 提交于
No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 23 2月, 2010 2 次提交
-
-
由 Dominik Brodowski 提交于
Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Dominik Brodowski 提交于
As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 18 2月, 2010 5 次提交
-
-
由 Dominik Brodowski 提交于
If a new interval overlaps or extends an existing interval in add_interval(), do not fail, but extend the existing interval. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Protect the pccard_operations callback "set_mem_map" by a new mutex ops_mutex. This mutex also protects the following values in struct pcmcia_socket: pccard_mem_map win[] pccard_mem_map cis_mem void __iomem *cis_virt Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As PCMCIA is the only real user of CIS access functions, include cistpl.c in the PCMCIA module, not in the PCMCIA & CardBus core module. Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 18 1月, 2010 3 次提交
-
-
由 Dominik Brodowski 提交于
Add a lot of documentation to the rsrc_nonstatic io memory probe functions. Also, add a first memory probe call -- just checking whether request_resource() succeeds -- upon adding of resources. Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
In pccard_validate_cis(), validate the card CIS, not the CIS cache. Also, destroy the CIS cache if pccard_validate_cis fails. Furthermore, do not remove the fake CIS in destroy_cis_cache() but do so explicitely in the code paths where it makes sense. Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Do not release any iomem resources already in use. Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 08 12月, 2009 1 次提交
-
-
由 Dominik Brodowski 提交于
Fix several CodingStyle issues in drivers/pcmcia/ . checkpatch.pl no longer reports errors in the PCMCIA core. The remaining warnings mostly relate to wrong indent -- PCMCIA historically used 4 spaces --, to lines over 80 characters and to hundreds of typedefs. The cleanup of those will follow in the future. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 19 10月, 2009 1 次提交
-
-
由 Dominik Brodowski 提交于
pccard_read_tuple(), which is only used by the PCMCIA core, should handle TUPLE_RETURN_COMMON more sensibly: If a specific function (which may be 0) is requested, set tuple.Attributes = 0 as was done in all PCMCIA drivers. If, however, BIND_FN_ALL is requested, return the "common" tuple. As to the callers of pccard_read_tuple(): - All calls to pcmcia_validate_cis() had set the "function" parameter to BIND_FN_ALL. Therefore, remove the "function" parameter and make the parameter to pccard_read_tuple explicit. - Calls to CISTPL_VERS_1 and CISTPL_MANFID now set BIND_FN_ALL. This was already the case for calls to CISTPL_LONGLINK_MFC. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 17 10月, 2009 1 次提交
-
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 02 11月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
Signed-Off-By: NKay Sievers <kay.sievers@vrfy.org> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 23 8月, 2008 3 次提交
-
-
由 Dominik Brodowski 提交于
CS_OUT_OF_RESOURCE was almost only used to note -ENOMEM situations. Therefore, use -ENOMEM explicitely, and also print out warnings. CC: netdev@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 28 7月, 2008 1 次提交
-
-
由 Dominik Brodowski 提交于
Bug found by Harvey Harrison and Stephen Rothwell. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 24 6月, 2008 4 次提交
-
-
由 Magnus Damm 提交于
The code in include/pcmcia/bulkmem.h was only kept for compatibility reasons. Therefore, move the remaining region_info_t definition to ds.h [linux@dominikbrodowski.net: do not modify the IOCTL, move definition to ds.h, and update changelog] Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As cisinfo_t only contains one unsigned_int, pccard_validate_cis can be simplified by passing that around directly. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Let pcmcia_ioctl interact with rsrc_nonstatic using functions which rsrc_nonstatic.c has to use anyway. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 David Brownell 提交于
Simplify sysfs attribute registration for sockets without static resource mappings by using an attribute_group. This shrinks object size a bit: use loops in sysfs code, but have more data. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 01 5月, 2008 1 次提交
-
-
由 Sam Ravnborg 提交于
Silence the following warnings: WARNING: drivers/pcmcia/built-in.o(.data+0x6e8): Section mismatch in reference from the variable pcmcia_bus_interface to the function .devinit.text:pcmcia_bus_add_socket() WARNING: drivers/pcmcia/built-in.o(.data+0xa88): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devinit.text:pccard_sysfs_add_rsrc() WARNING: drivers/pcmcia/built-in.o(.data+0xa90): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devexit.text:pccard_sysfs_remove_rsrc() The variables of type class_interface contains references to __devinit and __devexit functions which is OK. Silence warnings by annotating the variables with __refdata. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 2月, 2008 1 次提交
-
-
由 Olof Johansson 提交于
Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Cc: <linux-pcmcia@lists.infradead.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 6月, 2006 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 31 3月, 2006 2 次提交
-
-
由 Dominik Brodowski 提交于
Remove the inclusion of include/config.h as it isn't needed any longer. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Use mutexes in the PCMICA core, as they suffice for what needs to be done. Includes a bugfix from and Signed-off-by Andrew Morton. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 06 1月, 2006 3 次提交
-
-
由 Dominik Brodowski 提交于
Convert users of kmalloc and memset to kzalloc Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Andrew Morton 提交于
Also return a value if CONFIG_PCMCIA_PROBE is not set. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Add a return value to pcmcia_validate_mem. Only if we have enough memory available to map the CIS, we should proceed in trying to determine information about the device. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 31 10月, 2005 1 次提交
-
-
由 Brian Gerst 提交于
Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: NBrian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2005 1 次提交
-
-
由 Dmitry Torokhov 提交于
Driver core: pass interface to class intreface methods Pass interface as argument to add() and remove() class interface methods. This way a subsystem can implement generic add/remove handlers and then call interface-specific ones. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 9月, 2005 2 次提交
-
-
由 Dominik Brodowski 提交于
Only start up nonstatic sockets if both IO and MEM resources are available. Thanks to Russell King and Matthew Wilcox for tracking this down. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Allow for excluding only one port in /etc/pcmcia/config.otps Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 28 6月, 2005 2 次提交
-
-
由 Dominik Brodowski 提交于
Don't auto-configure yenta sockets for PCMCIA devices if it is connected to the root PCI bus on the x86 or x86_64 architectures. Previously, this was handled by the "ioport_resource"/"iomem_resource" check a few lines below, but with the new ACPI-based resource handling this doesn't catch all cases any longer. pci-yenta-cardbus-fix.patch and this patch should solve the initialization time trouble. However, the ACPI-based PCI resource handling is badly broken, IMHO: - many resources of devices don't show up in the resource trees ( /proc/iomem and /proc/ioports) any longer. This means that PCMCIA, but also possibly other subsystems (ISA, PnP, ...) do not know which resources it cannot use. - verify_root_windows() should fail if there are no iomem _or_ ioport resources, not only if there are no iomem _and_ ioport resources. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
- properly bail out in set_cis_map if call to socket driver's set_mem_map failed - don't abort do_mem_probe cycle if one entry failed (!CONFIG_PCMCIA_PROBE) - don't do iomem probing in chunks larger than 0x800000 (1 << 23) as yenta_socket and vrc4173_cardu.c fail to set_mem_map for windows equal to or larger than (1 << 24). Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-