- 14 12月, 2016 27 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull another libata patch from Tejun Heo: "One more patch from Adam added. It makes libata skip probing for NCQ prio unless the feature is explicitly requested by the user. This is necessary because some controllers lock up after the optional feature is probed" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: avoid probing NCQ Prio Support if not explicitly requested
-
由 Adam Manzanares 提交于
Previously, when the ata device was being initialized we were probing for NCQ prio support by checking the identify information and also checking the log page that holds information about ncq prio support. This caused an error on an Intel HBA so the code is now updated to only probe for NCQ prio support when the sysfs variable controlling NCQ prio support is enabled. tj: Update formatting, switch to spin_[un]lock_irq() and update locking a bit, use REVALIDATE instead of RESET, and return -EIO instead of -EINVAL on config failure. Signed-off-by: NAdam Manzanares <adam.manzanares@wdc.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata updates from Tejun Heo: - Adam added opt-in ATA command priority support. - There are machines which hide multiple nvme devices behind an ahci BAR. Dan Williams proposed a solution to force-switch the mode but deemed too hackishd. People are gonna discuss the proper way to handle the situation in nvme standard meetings. For now, detect and warn about the situation. - Low level driver specific changes. Christoph Hellwig pipes in about the hidden nvme warning: "I wish that was the case. We've pretty much agreed that we'll want to implement it as a virtual PCIe root bridge, similar to Intels other 'innovation' VMD that we work around that way. But Intel management has apparently decided that they don't want to spend more cycles on this now that Lenovo has an optional BIOS that doesn't force this broken mode anymore, and no one outside of Intel has enough information to implement something like this. So for now I guess this warning is it, until Intel reconsideres and spends resources on fixing up the damage their Chipset people caused" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: warn about remapped NVMe devices ahci-remap.h: add ahci remapping definitions nvme: move NVMe class code to pci_ids.h pata: imx: support controller modes up to PIO4 pata: imx: add support of setting timings for PIO modes pata: imx: set controller PIO mode with .set_piomode callback pata: imx: sort headers out ata: set ncq_prio_enabled iff device has support ata: ATA Command Priority Disabled By Default ata: Enabling ATA Command Priorities block: Add iocontext priority to request ahci: qoriq: added ls1046a platform support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue updates from Tejun Heo: "Mostly patches to initialize workqueue subsystem earlier and get rid of keventd_up(). The patches were headed for the last merge cycle but got delayed due to a bug found late minute, which is fixed now. Also, to help debugging, destroy_workqueue() is more chatty now on a sanity check failure." * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: move wq_numa_init() to workqueue_init() workqueue: remove keventd_up() debugobj, workqueue: remove keventd_up() usage slab, workqueue: remove keventd_up() usage power, workqueue: remove keventd_up() usage tty, workqueue: remove keventd_up() usage mce, workqueue: remove keventd_up() usage workqueue: make workqueue available early during boot workqueue: dump workqueue state on sanity check failures in destroy_workqueue()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu update from Tejun Heo: "This includes just one patch to reject non-power-of-2 alignments and trigger warning. Interestingly, this actually caught a bug in XEN ARM64" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: ensure the requested alignment is power of two
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging/IIO updates from Greg KH: "Here's the "big" staging/iio pull request for 4.10-rc1. Not as big as 4.9 was, but still just over a thousand changes. We almost broke even of lines added vs. removed, as the slicoss driver was removed (got a "clean" driver for the same hardware through the netdev tree), and some iio drivers were also dropped, but I think we ended up adding a few thousand lines to the source tree in the end. Other than that it's a lot of minor fixes all over the place, nothing major stands out at all. All of these have been in linux-next for a while. There will be a merge conflict with Al's vfs tree in the lustre code, but the resolution for that should be pretty simple, that too has been in linux-next" * tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits) staging: comedi: comedidev.h: Document usage of 'detach' handler staging: fsl-mc: remove unnecessary info prints from bus driver staging: fsl-mc: add sysfs ABI doc staging/lustre/o2iblnd: Fix misspelled attemps->attempts staging/lustre/o2iblnd: Fix misspelling intialized->intialized staging/lustre: Convert all bare unsigned to unsigned int staging/lustre/socklnd: Fix whitespace problem staging/lustre/o2iblnd: Add missing space staging/lustre/lnetselftest: Fix potential integer overflow staging: greybus: audio_module: remove redundant OOM message staging: dgnc: Fix lines longer than 80 characters staging: dgnc: fix blank line after '{' warnings. staging/android: remove Sync Framework tasks from TODO staging/lustre/osc: Revert erroneous list_for_each_entry_safe use staging: slicoss: remove the staging driver staging: lustre: libcfs: remove lnet upcall code staging: lustre: remove set but unused variables staging: lustre: osc: set lock data for readahead lock staging: lustre: import: don't reconnect during connect interpret staging: lustre: clio: remove mtime check in vvp_io_fault_start() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial updates from Greg KH: "Here's the tty/serial patchset for 4.10-rc1. It's been a quiet kernel cycle for this subsystem, just a small number of changes. A few new serial drivers, and some cleanups to the old vgacon logic, and other minor serial driver changes as well. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: 8250_mid fix calltrace when hotplug 8250 serial controller console: Move userspace I/O out of console_lock to fix lockdep warning tty: nozomi: avoid sprintf buffer overflow serial: 8250_pci: Detach low-level driver during PCI error recovery serial: core: don't check port twice in a row mxs-auart: count FIFO overrun errors serial: 8250_dw: Add support for IrDA SIR mode serial: 8250: Expose set_ldisc function serial: 8250: Add IrDA to UART capabilities serial: 8250_dma: power off device after TX is done serial: 8250_port: export serial8250_rpm_{get|put}_tx() serial: sunsu: Free memory when probe fails serial: sunhv: Free memory when remove() is called vt: fix Scroll Lock LED trigger name tty: typo in comments in drivers/tty/vt/keyboard.c tty: amba-pl011: Add earlycon support for SBSA UART tty: nozomi: use permission-specific DEVICE_ATTR variants tty: serial: Make the STM32 serial port depend on it's arch serial: ifx6x60: Free memory when probe fails serial: ioc4_serial: Free memory when kzalloc fails during probe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI updates from Rafael Wysocki: "The ACPICA code in the kernel gets updated as usual (included is upstream revision 20160930 and a few commits from the next one, with the rest waiting for an issue discovered in linux-next to be addressed) which brings in a couple of fixes and cleanups On top of that initial support for APEI on ARM64 is added, two new pieces of documentation are introduced, the properties-parsing code is updated to follow changes in the (external) documentation it is based on and there are a few updates of SoC drivers, some new blacklist entries, plus some assorted fixes and cleanups Specifics: - ACPICA update including upstream revision 20160930 and several commits beyond it (Bob Moore, Lv Zheng) - Initial support for ACPI APEI on ARM64 (Tomasz Nowicki) - New document describing the handling of _OSI and _REV in Linux (Len Brown) - New document describing the usage rules for _DSD properties (Rafael Wysocki) - Update of the ACPI properties-parsing code to reflect recent changes in the (external) documentation it is based on (Rafael Wysocki) - Updates of the ACPI LPSS and ACPI APD SoC drivers for additional hardware support (Andy Shevchenko, Nehal Shah) - New blacklist entries for _REV and video handling (Alex Hung, Hans de Goede, Michael Pobega) - ACPI battery driver fix to fall back to _BIF if _BIX fails (Dave Lambley) - NMI notifications handling fix for APEI (Prarit Bhargava) - Error code path fix for the ACPI CPPC library (Dan Carpenter) - Assorted cleanups (Andy Shevchenko, Longpeng Mike)" * tag 'acpi-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits) ACPICA: Utilities: Add new decode function for parser values ACPI / osl: Refactor acpi_os_get_root_pointer() to drop 'else':s ACPI / osl: Propagate actual error code for kstrtoul() ACPI / property: Document usage rules for _DSD properties ACPI: Document _OSI and _REV for Linux BIOS writers ACPI / APEI / ARM64: APEI initial support for ARM64 ACPI / APEI: Fix NMI notification handling ACPICA: Tables: Add an error message complaining driver bugs ACPICA: Tables: Add acpi_tb_unload_table() ACPICA: Tables: Cleanup acpi_tb_install_and_load_table() ACPICA: Events: Fix acpi_ev_initialize_region() return value ACPICA: Back port of "ACPICA: Dispatcher: Tune interpreter lock around AcpiEvInitializeRegion()" ACPICA: Namespace: Add acpi_ns_handle_to_name() ACPI / CPPC: set an error code on probe error path ACPI / video: Add force_native quirk for HP Pavilion dv6 ACPI / video: Add force_native quirk for Dell XPS 17 L702X ACPI / property: Hierarchical properties support update ACPI / LPSS: enable hard LLP for DMA ACPI / battery: If _BIX fails, retry with _BIF ACPI / video: Move ACPI_VIDEO_NOTIFY_* defines to acpi/video.h ..
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management updates from Rafael Wysocki: "Again, cpufreq gets more changes than the other parts this time (one new driver, one old driver less, a bunch of enhancements of the existing code, new CPU IDs, fixes, cleanups) There also are some changes in cpuidle (idle injection rework, a couple of new CPU IDs, online/offline rework in intel_idle, fixes and cleanups), in the generic power domains framework (mostly related to supporting power domains containing CPUs), and in the Operating Performance Points (OPP) library (mostly related to supporting devices with multiple voltage regulators) In addition to that, the system sleep state selection interface is modified to make it easier for distributions with unchanged user space to support suspend-to-idle as the default system suspend method, some issues are fixed in the PM core, the latency tolerance PM QoS framework is improved a bit, the Intel RAPL power capping driver is cleaned up and there are some fixes and cleanups in the devfreq subsystem Specifics: - New cpufreq driver for Broadcom STB SoCs and a Device Tree binding for it (Markus Mayer) - Support for ARM Integrator/AP and Integrator/CP in the generic DT cpufreq driver and elimination of the old Integrator cpufreq driver (Linus Walleij) - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier, and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie, Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik) - cpufreq core fix to eliminate races that may lead to using inactive policy objects and related cleanups (Rafael Wysocki) - cpufreq schedutil governor update to make it use SCHED_FIFO kernel threads (instead of regular workqueues) for doing delayed work (to reduce the response latency in some cases) and related cleanups (Viresh Kumar) - New cpufreq sysfs attribute for resetting statistics (Markus Mayer) - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis, Viresh Kumar) - Support for using generic cpufreq governors in the intel_pstate driver (Rafael Wysocki) - Support for per-logical-CPU P-state limits and the EPP/EPB (Energy Performance Preference/Energy Performance Bias) knobs in the intel_pstate driver (Srinivas Pandruvada) - New CPU ID for Knights Mill in intel_pstate (Piotr Luc) - intel_pstate driver modification to use the P-state selection algorithm based on CPU load on platforms with the system profile in the ACPI tables set to "mobile" (Srinivas Pandruvada) - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki, Srinivas Pandruvada) - cpufreq powernv driver updates including fast switching support (for the schedutil governor), fixes and cleanus (Akshay Adiga, Andrew Donnellan, Denis Kirjanov) - acpi-cpufreq driver rework to switch it over to the new CPU offline/online state machine (Sebastian Andrzej Siewior) - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth Prakash) - Idle injection rework (to make it use the regular idle path instead of a home-grown custom one) and related powerclamp thermal driver updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej Siewior) - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy Shevchenko, Piotr Luc) - intel_idle driver cleanups and switch over to using the new CPU offline/online state machine (Anna-Maria Gleixner, Sebastian Andrzej Siewior) - cpuidle DT driver update to support suspend-to-idle properly (Sudeep Holla) - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian, Rafael Wysocki) - Preliminary support for power domains including CPUs in the generic power domains (genpd) framework and related DT bindings (Lina Iyer) - Assorted fixes and cleanups in the generic power domains (genpd) framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven) - Preliminary support for devices with multiple voltage regulators and related fixes and cleanups in the Operating Performance Points (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd) - System sleep state selection interface rework to make it easier to support suspend-to-idle as the default system suspend method (Rafael Wysocki) - PM core fixes and cleanups, mostly related to the interactions between the system suspend and runtime PM frameworks (Ulf Hansson, Sahitya Tummala, Tony Lindgren) - Latency tolerance PM QoS framework imorovements (Andrew Lutomirski) - New Knights Mill CPU ID for the Intel RAPL power capping driver (Piotr Luc) - Intel RAPL power capping driver fixes, cleanups and switch over to using the new CPU offline/online state machine (Jacob Pan, Thomas Gleixner, Sebastian Andrzej Siewior) - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc, rockchip-dfi devfreq drivers and the devfreq core (Axel Lin, Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar) - Fix for false-positive KASAN warnings during resume from ACPI S3 (suspend-to-RAM) on x86 (Josh Poimboeuf) - Memory map verification during resume from hibernation on x86 to ensure a consistent address space layout (Chen Yu) - Wakeup sources debugging enhancement (Xing Wei) - rockchip-io AVS driver cleanup (Shawn Lin)" * tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits) devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks devfreq: rk3399_dmc: Remove dangling rcu_read_unlock() devfreq: exynos: Don't use OPP structures outside of RCU locks Documentation: intel_pstate: Document HWP energy/performance hints cpufreq: intel_pstate: Support for energy performance hints with HWP cpufreq: intel_pstate: Add locking around HWP requests PM / sleep: Print active wakeup sources when blocking on wakeup_count reads PM / core: Fix bug in the error handling of async suspend PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend PM / Domains: Fix compatible for domain idle state PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators() PM / OPP: Allow platform specific custom set_opp() callbacks PM / OPP: Separate out _generic_set_opp() PM / OPP: Add infrastructure to manage multiple regulators PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage() PM / OPP: Manage supply's voltage/current in a separate structure PM / OPP: Don't use OPP structure outside of rcu protected section PM / OPP: Reword binding supporting multiple regulators per device PM / OPP: Fix incorrect cpu-supply property in binding cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state() ..
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm updates from Dave Airlie: "This is the main pull request for drm for 4.10 kernel. New drivers: - ZTE VOU display driver (zxdrm) - Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson) - MXSFB support (mxsfb) Core: - Format handling has been reworked - Better atomic state debugging - drm_mm leak debugging - Atomic explicit fencing support - fbdev helper ops - Documentation updates - MST fbcon fixes Bridge: - Silicon Image SiI8620 driver Panel: - Add support for new simple panels i915: - GVT Device model - Better HDMI2.0 support on skylake - More watermark fixes - GPU idling rework for suspend/resume - DP Audio workarounds - Scheduler prep-work - Opregion CADL handling - GPU scheduler and priority boosting amdgfx/radeon: - Support for virtual devices - New VM manager for non-contig VRAM buffers - UVD powergating - SI register header cleanup - Cursor fixes - Powermanagement fixes nouveau: - Powermangement reworks for better voltage/clock changes - Atomic modesetting support - Displayport Multistream (MST) support. - GP102/104 hang and cursor fixes - GP106 support hisilicon: - hibmc support (BMC chip for aarch64 servers) armada: - add tracing support for overlay change - refactor plane support - de-midlayer the driver omapdrm: - Timing code cleanups rcar-du: - R8A7792/R8A7796 support - Misc fixes. sunxi: - A31 SoC display engine support imx-drm: - YUV format support - Cleanup plane atomic update mali-dp: - Misc fixes dw-hdmi: - Add support for HDMI i2c master controller tegra: - IOMMU support fixes - Error handling fixes tda998x: - Fix connector registration - Improved robustness - Fix infoframe/audio compliance virtio: - fix busid issues - allocate more vbufs qxl: - misc fixes and cleanups. vc4: - Fragment shader threading - ETC1 support - VEC (tv-out) support msm: - A5XX GPU support - Lots of atomic changes tilcdc: - Misc fixes and cleanups. etnaviv: - Fix dma-buf export path - DRAW_INSTANCED support - fix driver on i.MX6SX exynos: - HDMI refactoring fsl-dcu: - fbdev changes" * tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits) drm/nouveau/kms/nv50: fix atomic regression on original G80 drm/nouveau/bl: Do not register interface if Apple GMUX detected drm/nouveau/bl: Assign different names to interfaces drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2 drm/nouveau/ltc: protect clearing of comptags with mutex drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap drm/nouveau/core: recognise GP106 chipset drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode drm/nouveau/gr/gf100-: properly ack all FECS error interrupts drm/nouveau/fifo/gf100-: recover from host mmu faults drm: Add fake controlD* symlinks for backwards compat drm/vc4: Don't use drm_put_dev drm/vc4: Document VEC DT binding drm/vc4: Add support for the VEC (Video Encoder) IP drm: Add TV connector states to drm_connector_state drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum drm/vc4: Fix ->clock_select setting for the VEC encoder drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well drm/amdgpu: use pin rather than pin_restricted in a few cases ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Linus Torvalds 提交于
Pull fbdev update from Tomi Valkeinen: "No one has stepped up to take the job, so I've marked fbdev as orphan" * tag 'fbdev-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: fbdev: remove current maintainer
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO updates from Alex Williamson: - VFIO updates for v4.10 primarily include a new Mediated Device interface, which essentially allows software defined devices to be exposed to users through VFIO. The host vendor driver providing this virtual device polices, or mediates user access to the device. These devices often incorporate portions of real devices, for instance the primary initial users of this interface expose vGPUs which allow the user to map mediated devices, or mdevs, to a portion of a physical GPU. QEMU composes these mdevs into PCI representations using the existing VFIO user API. This enables both Intel KVM-GT support, which is also expected to arrive into Linux mainline during the v4.10 merge window, as well as NVIDIA vGPU, and also Channel I/O devices (aka CCW devices) for s390 virtualization support. (Kirti Wankhede, Neo Jia) - Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin) - Fixes to VFIO capability chain handling (Eric Auger) - Error handling fixes for fallout from mdev (Christophe JAILLET) - Notifiers to expose struct kvm to mdev vendor drivers (Jike Song) - type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia) * tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits) vfio iommu type1: Fix size argument to vfio_find_dma() in pin_pages/unpin_pages vfio iommu type1: Fix size argument to vfio_find_dma() during DMA UNMAP. vfio iommu type1: WARN_ON if notifier block is not unregistered kvm: set/clear kvm to/from vfio_group when group add/delete vfio: support notifier chain in vfio_group vfio: vfio_register_notifier: classify iommu notifier vfio: Fix handling of error returned by 'vfio_group_get_from_dev()' vfio: fix vfio_info_cap_add/shift vfio/pci: Drop unnecessary pcibios_err_to_errno() MAINTAINERS: Add entry VFIO based Mediated device drivers docs: Sample driver to demonstrate how to use Mediated device framework. docs: Sysfs ABI for mediated device framework docs: Add Documentation for Mediated devices vfio: Define device_api strings vfio_platform: Updated to use vfio_set_irqs_validate_and_prepare() vfio_pci: Updated to use vfio_set_irqs_validate_and_prepare() vfio: Introduce vfio_set_irqs_validate_and_prepare() vfio_pci: Update vfio_pci to use vfio_info_add_capability() vfio: Introduce common function to add capabilities vfio iommu: Add blocking notifier to notify DMA_UNMAP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull gcc plugins updates from Kees Cook: "Minor changes to the gcc plugins: - add the gcc plugins Makefile to MAINTAINERS to route things correctly - hide cyc_complexity behind !CONFIG_TEST for the future unhiding of plugins generally" * tag 'gcc-plugins-v4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Adjust Kconfig to avoid cyc_complexity MAINTAINERS: add GCC plugins Makefile
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull pstore updates from Kees Cook: "Improvements and fixes to pstore subsystem: - add additional checks for bad platform data - remove bounce buffer in console writer - protect read/unlink race with a mutex - correctly give up during dump locking failures - increase ftrace bandwidth by splitting ftrace buffers per CPU" * tag 'pstore-v4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ramoops: add pdata NULL check to ramoops_probe pstore: Convert console write to use ->write_buf pstore: Protect unlink with read_mutex pstore: Use global ftrace filters for function trace filtering ftrace: Provide API to use global filtering for ftrace ops pstore: Clarify context field przs as dprzs pstore: improve error report for failed setup pstore: Merge per-CPU ftrace records into one pstore: Add ftrace timestamp counter ramoops: Split ftrace buffer space into per-CPU zones pstore: Make ramoops_init_przs generic for other prz arrays pstore: Allow prz to control need for locking pstore: Warn on PSTORE_TYPE_PMSG using deprecated function pstore: Make spinlock per zone instead of global pstore: Actually give up during locking failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC updates from Borislav Petkov: - add KNM support to sb_edac (Piotr Luc) - add AMD Zen support to amd64_edac (Yazen Ghannam) - misc small cleanups, improvements and fixes (Colin Ian King, Dave Hansen, Pan Bian, Thor Thayer, Wei Yongjun, Yanjiang Jin, yours truly) * tag 'edac_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (26 commits) EDAC, amd64: Fix improper return value EDAC, amd64: Improve amd64-specific printing macros EDAC, amd64: Autoload amd64_edac_mod on Fam17h systems EDAC, amd64: Define and register UMC error decode function EDAC, amd64: Determine EDAC capabilities on Fam17h systems EDAC, amd64: Determine EDAC MC capabilities on Fam17h EDAC, amd64: Add Fam17h debug output EDAC, amd64: Add Fam17h scrubber support EDAC, mce_amd: Don't report poison bit on Fam15h, bank 4 EDAC, amd64: Read MC registers on AMD Fam17h EDAC, amd64: Reserve correct PCI devices on AMD Fam17h EDAC, amd64: Add AMD Fam17h family type and ops EDAC, amd64: Extend ecc_enabled() to Fam17h EDAC, amd64: Don't force-enable ECC checking on newer systems EDAC, amd64: Add Deferred Error type EDAC, amd64: Rename __log_bus_error() to be more specific EDAC, amd64: Change target of pci_name from F2 to F3 EDAC, mce_amd: Rename nb_bus_decoder to dram_ecc_decoder EDAC: Add LRDDR4 DRAM type EDAC, mpc85xx: Implement remove method for the platform driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management updates from Zhang Rui: - Thermal core code reorganization and cleanup. Two new files are created for thermal sysfs I/F code and thermal helper functions (Eduardo Valentin). - Sanitize hotplug and locking for x86_pkg_temp driver (Thomas Gleixner) - Update MAINTAINER file for pwm-fan driver and Samsung thermal driver (Lukasz Majewski) - Fix module auto-load for max77620, tango and db8500 thermal driver (Javier Martinez Canillas) - Fix a bug that thermal hwmon sysfs I/F returns wrong critical trip point temperature value (Krzysztof Kozlowski) - Add Skylake PCH 100 series support for intel_pch_thermal driver (OGAWA Hirofumi) - Small fixes and cleanups for platform thermal drivers (Julia Lawall, Luis Henriques, Leo Yan, Stephen Boyd, Shawn Lin, Javi Merino and Lukasz Luba) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (76 commits) MAINTAINERS: Samsung: Update maintainer for PWM FAN and SAMSUNG THERMAL thermal/x86 pkg temp: Convert to hotplug state machine thermal/x86_pkg_temp: Sanitize package management thermal/x86_pkg_temp: Move work into package struct thermal/x86_pkg_temp: Move work scheduled flag into package struct thermal/x86_pkg_temp: Sanitize locking thermal/x86_pkg_temp: Cleanup code some more thermal/x86_pkg_temp: Cleanup namespace thermal/x86_pkg_temp: Get rid of ref counting thermal/x86_pkg_temp: Sanitize callback (de)initialization thermal/x86_pkg_temp: Replace open coded cpu search thermal/x86_pkg_temp: Remove redundant package search thermal/x86_pkg_temp: Cleanup thermal interrupt handling thermal: hwmon: Properly report critical temperature in sysfs devfreq_cooling: pass a pointer to devfreq in the power model callbacks devfreq_cooling: make the structs devfreq_cooling_xxx visible for all dt-bindings: rockchip-thermal: fix the misleading description thermal: rockchip: improve the warning log thermal: db8500: Fix module autoload thermal: tango: Fix module autoload ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk updates from Stephen Boyd: "This is a fairly quiet release. We don't have any patches to the core framework. The only patch that can even be considered "core" adds another clk_get() variant. The rest of the changes are in drivers for various SoCs, and we have a few bits for ARM shmobile architecture code (dts and mach) due to the dependency we're breaking between shmobile architecture code and its clk driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the summary: Core: - Support for devm_get_clk_from_child() used with DT bindings that have subnodes with the 'clocks' property New Drivers: - Allwinner A64 (sun50i) - i.MX imx6ull - Socionext's UniPhier SoC CPUs - Mediatek MT2701 SoCs - Rockchip rk1108 SoCs - Qualcomm MSM8994/MSM8992 SoCS - Qualcomm RPM Clocks - Hisilicon Hi3516CV300 and Hi3798CV200 CRG - Oxford Semiconductor OX820 and OX810SE SoCs - Renesas RZ/G1M and RZ/GIE SoCs - Renesas R-Car RST driver for mode pin states Updates: - Four Allwinner SoCs are migrated to the new style clk driver - Rockchip rk3399,rk3066 PLL optimizations - i.MX LVDS display glitch fixes and AV PLL precision improvements - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support - Explicit demodularization of always builtin drivers - Freescale Qoriq ls1012a and ls1046a support - Exynos 5433 parent typo fix and critical clock tagging - Renesas r8a7743/r8a7745 CPG - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support - stm32f4* LSI, LSE, RTC, and QSPI clocks - pxa27x and pxa25x cpufreq as clks - TI omap36xx sprz319 advisory 2.1 workaround - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() clk: add devm_get_clk_from_child() API clk: st: clk-flexgen: Unmap region obtained by of_iomap clk: keystone: pll: Unmap region obtained by of_iomap clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc clk: cdce925: Fix limit check clk: bcm: Make COMMON_CLK_IPROC into a library clk: qoriq: added ls1012a clock configuration clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock clk: bcm: Support rate change propagation on bcm2835 clocks clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk clk: ti: omap36xx: Work around sprz319 advisory 2.1 clk: clk-wm831x: fix a logic error clk: uniphier: add cpufreq data for LD11, LD20 SoCs clk: uniphier: add CPU-gear change (cpufreq) support clk: qcom: Put venus core0/1 gdscs to hw control mode clk: qcom: gdsc: Add support for gdscs with HW control ...
-
git://github.com/andersson/remoteproc由 Linus Torvalds 提交于
Pull rpmsg updates from Bjorn Andersson: "Argument validation in public functions, function stubs for COMPILE_TEST-ing clients, preparation for exposing rpmsg endponts to user space and minor Qualcomm SMD fixes" * tag 'rpmsg-v4.10' of git://github.com/andersson/remoteproc: dt-binding: soc: qcom: smd: Add label property rpmsg: qcom_smd: Correct return value for O_NONBLOCK rpmsg: Provide function stubs for API rpmsg: Handle invalid parameters in public API rpmsg: Support drivers without primary endpoint rpmsg: Introduce a driver override mechanism rpmsg: smd: Reduce restrictions when finding channel
-
git://github.com/andersson/remoteproc由 Linus Torvalds 提交于
Pull remoteproc updates from Bjorn Andersson: - introduce remoteproc "subdevice" support, which allows remoteproc driver to associate devices to the "running" state of the remoteproc, allowing devices to be probed and removed as the remote processor is booted, shut down or recovering from a crash. - handling of virtio device resources was improved, vring memory is now allocated as part of other memory allocation. This ensures that all vrings for all virtio devices are allocated before we boot the remote processor. - the debugfs mechanism for starting and stopping remoteproc instances was replaced with a sysfs interface, also providing a mechanism for specifying firmware to use by the instance. This allows user space to load and boot use case specific firmware on remote processors. - new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as removal of the unused StE modem loader. - finally support for crash recovery in the Qualcomm Wirelss subsystem (used for WiFi/BT/FM on a number of platforms) and a number of bug fixes and cleanups * tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits) remoteproc: qcom_adsp_pil: select qcom_scm remoteproc: Drop wait in __rproc_boot() remoteproc/ste: Delete unused driver remoteproc: Remove "experimental" warning remoteproc: qcom_adsp_pil: select qcom_scm dt-binding: soc: qcom: smd: Add label property remoteproc: qcom: mdt_loader: add include for sizes remoteproc: Update last rproc_put users to rproc_free remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE remoteproc: wcnss-pil: add QCOM_SMD dependency dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'" remoteproc: Add support for xo clock remoteproc: adsp-pil: fix recursive dependency remoteproc: Introduce Qualcomm ADSP PIL dt-binding: remoteproc: Introduce ADSP loader binding remoteproc: qcom_wcnss: Fix circular module dependency remoteproc: Merge table_ptr and cached_table pointers remoteproc: Remove custom vdev handler list remoteproc: Update max_notifyid as we allocate vrings remoteproc: Decouple vdev resources and devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC updates from Ulf Hansson: "It's been an busy period for mmc. Quite some changes in the mmc core, two new mmc host drivers, some existing drivers being extended to support new IP versions and lots of other updates. MMC core: - Delete eMMC packed command support - Introduce mmc_abort_tuning() to enable eMMC tuning to fail gracefully - Introduce mmc_can_retune() to see if a host can be retuned - Re-work and improve the sequence when sending a CMD6 for mmc - Enable CDM13 polling when switching to HS and HS DDR mode for mmc - Relax checking for CMD6 errors after switch to HS200 - Re-factoring the code dealing with the mmc block queue - Recognize whether the eMMC card supports CMDQ - Fix 4K native sector check - Don't power off the card when starting the host - Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries - Improve error handling and drop meaningless BUG_ONs() - Lots of clean-ups and changes to improve the quality of the code MMC host: - sdhci: Fix tuning sequence and clean-up the related code - sdhci: Add support to via DT override broken SDHCI cap register bits - sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant - sdhci-msm: Update clock management - sdhci-msm: Add support for eMMC HS400 mode - sdhci-msm: Deploy runtime/system PM support - sdhci-iproc: Extend driver support to newer IP versions - sdhci-pci: Add support for Intel GLK - sdhci-pci: Add support for Intel NI byt sdio - sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus - sdhci: Lots of various small improvements and clean-ups - tmio: Add support for tuning - sh_mobile_sdhi: Add support for tuning - sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC - sh_mobile_sdhi: remove support for sh7372 - davinci: Use mmc_of_parse() to enable generic mmc DT bindings - meson: Add new driver to support GX platforms - dw_mmc: Deploy generic runtime/system PM support - dw_mmc: Lots of various small improvements As a part of the mmc changes this time, I have also pulled in an immutable branch/tag (soc-device-match-tag1) hosted by Geert Uytterhoeven, to share the implementation of the new soc_device_match() interface. This is needed by these mmc related changes: - mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0 - soc: fsl: add GUTS driver for QorIQ platforms" * tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits) mmc: sdhci-cadence: add Cadence SD4HC support mmc: sdhci: export sdhci_execute_tuning() mmc: sdhci: Tidy tuning loop mmc: sdhci: Simplify tuning block size logic mmc: sdhci: Factor out tuning helper functions mmc: sdhci: Use mmc_abort_tuning() mmc: mmc: Introduce mmc_abort_tuning() mmc: sdhci: Always allow tuning to fall back to fixed sampling mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops mmc: sdhci: Fix recovery from tuning timeout Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure" mmc: mmc: Relax checking for switch errors after HS200 switch mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate mmc: dw_mmc: display the clock message only one time when card is polling mmc: dw_mmc: add the debug message for polling and non-removable mmc: dw_mmc: check the "present" variable before checking flags ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator updates from Mark Brown: "A quiet release for the regulator API, conference season must've been slowing everyone down: - a new interface allowing drivers to provide an interface for reading a more detailed description of error conditions which allows devices using these regulators to build - ACPI support for the fixed voltage regulator. - cleanups for the TI TWL drivers to reduce code duplication" * tag 'regulator-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits) regulator: tps65086: Fix 25mV ranges for BUCK regulators 1, 2, and 6 regulator: Fix regulator_get_error_flags() signature mismatch regulator: core: add newline in debug message regulator: tps65086: Fix 25mV ranges for BUCK regulators regulator: core: Correct type of mode in regulator_mode_constrain regulator: max77620: add documentation for MPOK property regulator: max77620: add support to configure MPOK regulator: twl6030: Remove unused fields from struct twlreg_info regulator: twl: Remove unused fields from struct twlreg_info regulator: twl: split twl6030 logic into its own file regulator: twl: kill unused functions regulator: twl: make driver DT only regulator: twl-regulator: rework fixed regulator definition regulator: max77620: remove unused variable regulator: pwm: Add missing quotes to DT example regulator: stw481x-vmmc: fix ages old enable error regulator: gpio: properly check return value of of_get_named_gpio regulator: lp873x: Add support for populating input supply regulator: axp20x: Fix axp809 ldo_io registration error on cold boot regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmap ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap fixlet from Mark Brown: "The only change for regmap this merge window is a single fix for an unused variable" * tag 'regmap-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: cache: Remove unused 'blksize' variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds由 Linus Torvalds 提交于
Pull LED updates from Jacek Anaszewski: - userspace LED class driver - it can be useful for testing triggers and can also be used to implement virtual LEDs - LED class driver for NIC78bx device - LED core fixes for preventing potential races while setting brightness when software blinking is enabled - improvements in LED documentation to mention semantics on changing brightness while trigger is active * tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Add ACPI support leds: netxbig: fix module autoload for OF registration leds: pca963x: Add ACPI support leds: leds-cobalt-raq: use builtin_platform_driver led: core: Fix blink_brightness setting race led: core: Use atomic bit-field for the blink-flags leds: Add user LED driver for NIC78bx device leds: verify vendor and change license in mlxcpld driver leds: pca963x: enable low-power state leds: pca9532: Use default trigger value from platform data leds: pca963x: workaround group blink scaling issue cleanup LED documentation and make it match reality leds: lp3952: Export I2C module alias information for module autoload leds: mc13783: Fix MC13892 keypad led access ledtrig-cpu.c: fix english leds/leds-lp5523.txt: make documentation match reality tools/leds: Add uledmon program for monitoring userspace LEDs leds: Use macro for max device node name size leds: Introduce userspace LED class driver mfd: qcom-pm8xxx: Clean up PM8XXX namespace
-
- 13 12月, 2016 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pinctrl updates from Linus Walleij: "Bulk pin control changes for the v4.10 kernel cycle: No core changes this time. Mainly gradual improvement and feature growth in the drivers. New drivers: - New driver for TI DA850/OMAP-L138/AM18XX pinconf - The SX150x was moved over from the GPIO subsystem and reimagined as a pin control driver with GPIO support in a joint effort by three independent users of this hardware. The result was amazingly good! - New subdriver for the Oxnas OX820 Improvements: - The sunxi driver now supports the generic pin control bindings rather than the sunxi-specific. Add debouncing support to the driver. - Simplifications in pinctrl-single adding a generic parser. - Two downstream fixes and move the Raspberry Pi BCM2835 over to use the generic GPIOLIB_IRQCHIP" * tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits) pinctrl: sx150x: use new nested IRQ infrastructure pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505 pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced' pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147] pinctrl: mt8173: set GPIO16 to usb iddig mode pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf devicetree: bindings: pinctrl: Add binding for ti,da850-pupd Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition pinctrl: intel: set default handler to be handle_bad_irq() pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507 pinctrl: sx150x: sort chips by part number pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) pinctrl: imx: fix imx_pinctrl_desc initialization pinctrl: sx150x: support setting multiple pins at once pinctrl: sx150x: various spelling fixes and some white-space cleanup pinctrl: mediatek: use builtin_platform_driver pinctrl: stm32: use builtin_platform_driver pinctrl: sunxi: Testing the wrong variable pinctrl: nomadik: split up and comments MC0 pins ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull documentation update from Jonathan Corbet: "These are the documentation changes for 4.10. It's another busy cycle for the docs tree, as the sphinx conversion continues. Highlights include: - Further work on PDF output, which remains a bit of a pain but should be more solid now. - Five more DocBook template files converted to Sphinx. Only 27 to go... Lots of plain-text files have also been converted and integrated. - Images in binary formats have been replaced with more source-friendly versions. - Various bits of organizational work, including the renaming of various files discussed at the kernel summit. - New documentation for the device_link mechanism. ... and, of course, lots of typo fixes and small updates" * tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits) dma-buf: Extract dma-buf.rst Update Documentation/00-INDEX docs: 00-INDEX: document directories/files with no docs docs: 00-INDEX: remove non-existing entries docs: 00-INDEX: add missing entries for documentation files/dirs docs: 00-INDEX: consolidate process/ and admin-guide/ description scripts: add a script to check if Documentation/00-INDEX is sane Docs: change sh -> awk in REPORTING-BUGS Documentation/core-api/device_link: Add initial documentation core-api: remove an unexpected unident ppc/idle: Add documentation for powersave=off Doc: Correct typo, "Introdution" => "Introduction" Documentation/atomic_ops.txt: convert to ReST markup Documentation/local_ops.txt: convert to ReST markup Documentation/assoc_array.txt: convert to ReST markup docs-rst: parse-headers.pl: cleanup the documentation docs-rst: fix media cleandocs target docs-rst: media/Makefile: reorganize the rules docs-rst: media: build SVG from graphviz files docs-rst: replace bayer.png by a SVG image ...
-
由 Linus Torvalds 提交于
Merge updates from Andrew Morton: - various misc bits - most of MM (quite a lot of MM material is awaiting the merge of linux-next dependencies) - kasan - printk updates - procfs updates - MAINTAINERS - /lib updates - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (123 commits) init: reduce rootwait polling interval time to 5ms binfmt_elf: use vmalloc() for allocation of vma_filesz checkpatch: don't emit unified-diff error for rename-only patches checkpatch: don't check c99 types like uint8_t under tools checkpatch: avoid multiple line dereferences checkpatch: don't check .pl files, improve absolute path commit log test scripts/checkpatch.pl: fix spelling checkpatch: don't try to get maintained status when --no-tree is given lib/ida: document locking requirements a bit better lib/rbtree.c: fix typo in comment of ____rb_erase_color lib/Kconfig.debug: make CONFIG_STRICT_DEVMEM depend on CONFIG_DEVMEM MAINTAINERS: add drm and drm/i915 irc channels MAINTAINERS: add "C:" for URI for chat where developers hang out MAINTAINERS: add drm and drm/i915 bug filing info MAINTAINERS: add "B:" for URI where to file bugs get_maintainer: look for arbitrary letter prefixes in sections printk: add Kconfig option to set default console loglevel printk/sound: handle more message headers printk/btrfs: handle more message headers printk/kdb: handle more message headers ...
-
由 Joe Perches 提交于
.c and .h source files should not be executable, change the permissions to 0644. [ This would normally go through Andrew Morton, but his ancient patch-based toolchain doesn't do permission changes ] Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
- Regression fix from atomic conversion (rotation on the original G80). - Concurrency fix when clearing compression tags. - Fixes DP link training issues on GP102/4/6. - Fixes backlight handling in the presence of Apple GMUX. - Improvements to GPU error recovery in a number of scenarios. - GP106 support. * 'linux-4.10' of git://github.com/skeggsb/linux: drm/nouveau/kms/nv50: fix atomic regression on original G80 drm/nouveau/bl: Do not register interface if Apple GMUX detected drm/nouveau/bl: Assign different names to interfaces drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2 drm/nouveau/ltc: protect clearing of comptags with mutex drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap drm/nouveau/core: recognise GP106 chipset drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode drm/nouveau/gr/gf100-: properly ack all FECS error interrupts drm/nouveau/fifo/gf100-: recover from host mmu faults
-
git://anongit.freedesktop.org/tegra/linux由 Dave Airlie 提交于
drm/tegra: Changes for v4.10-rc1 This has a couple of fixes for IOMMU support and some fixes for error handling. * tag 'drm/tegra/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Set sgt pointer in BO pin drm/tegra: Support kernel mappings with IOMMU gpu: host1x: Add locking to syncpt gpu: host1x: Store device address to all bufs drm/tegra: gem: Remove some dead code drm/tegra: sor: No need to free devm_ allocated memory drm/tegra: Fix error handling drm/tegra: dpaux: Fix error handling
-
git://anongit.freedesktop.org/tegra/linux由 Dave Airlie 提交于
drm/panel: Changes for v4.10-rc1 This adds support for a couple more panels to the simple-panel driver. There is also a fix for a long-standing bug, but it's not critical since no code will currently trigger it. * tag 'drm/panel/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Add support for AUO G185HAN01 drm/panel: simple: Add support for AUO G133HAN01 drm/panel: simple: Add more properties to Innolux G121I1-L01 drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31 drm/panel: simple: Check against num_timings when setting preferred for timing drm/panel: Add support for Chunghwa CLAA070WP03XG panel drm/panel: simple: Add NVD9128 as a simple panel drm/panel: simple: Add support for AUO T215HVN01 drm/panel: simple: Add support for Sharp LQ150X1LG11 panels dt-bindings: display: Add Sharp LQ150X1LG11 panel binding
-
由 Dave Airlie 提交于
Merge tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc into drm-next single fix for backwards compat. * tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc: drm: Add fake controlD* symlinks for backwards compat
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "The irq department provides: - a major update to the auto affinity management code, which is used by multi-queue devices - move of the microblaze irq chip driver into the common driver code so it can be shared between microblaze, powerpc and MIPS - a series of updates to the ARM GICV3 interrupt controller - the usual pile of fixes and small improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) powerpc/virtex: Use generic xilinx irqchip driver irqchip/xilinx: Try to fall back if xlnx,kind-of-intr not provided irqchip/xilinx: Add support for parent intc irqchip/xilinx: Rename get_irq to xintc_get_irq irqchip/xilinx: Restructure and use jump label api irqchip/xilinx: Clean up print messages microblaze/irqchip: Move intc driver to irqchip ARM: virt: Select ARM_GIC_V3_ITS ARM: gic-v3-its: Add 32bit support to GICv3 ITS irqchip/gic-v3-its: Specialise readq and writeq accesses irqchip/gic-v3-its: Specialise flush_dcache operation irqchip/gic-v3-its: Narrow down Entry Size when used as a divider irqchip/gic-v3-its: Change unsigned types for AArch32 compatibility irqchip/gic-v3: Use nops macro for Cavium ThunderX erratum 23154 irqchip/gic-v3: Convert arm64 GIC accessors to {read,write}_sysreg_s genirq/msi: Drop artificial PCI dependency irqchip/bcm7038-l1: Implement irq_cpu_offline() callback genirq/affinity: Use default affinity mask for reserved vectors genirq/affinity: Take reserved vectors into account when spreading irqs PCI: Remove the irq_affinity mask from struct pci_dev ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer updates from Thomas Gleixner: "The time/timekeeping/timer folks deliver with this update: - Fix a reintroduced signed/unsigned issue and cleanup the whole signed/unsigned mess in the timekeeping core so this wont happen accidentaly again. - Add a new trace clock based on boot time - Prevent injection of random sleep times when PM tracing abuses the RTC for storage - Make posix timers configurable for real tiny systems - Add tracepoints for the alarm timer subsystem so timer based suspend wakeups can be instrumented - The usual pile of fixes and updates to core and drivers" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) timekeeping: Use mul_u64_u32_shr() instead of open coding it timekeeping: Get rid of pointless typecasts timekeeping: Make the conversion call chain consistently unsigned timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion alarmtimer: Add tracepoints for alarm timers trace: Update documentation for mono, mono_raw and boot clock trace: Add an option for boot clock as trace clock timekeeping: Add a fast and NMI safe boot clock timekeeping/clocksource_cyc2ns: Document intended range limitation timekeeping: Ignore the bogus sleep time if pm_trace is enabled selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous" clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map() arm64: dts: rockchip: Arch counter doesn't tick in system suspend clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend posix-timers: Make them configurable posix_cpu_timers: Move the add_device_randomness() call to a proper place timer: Move sys_alarm from timer.c to itimer.c ptp_clock: Allow for it to be optional Kconfig: Regenerate *.c_shipped files after previous changes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull smp hotplug updates from Thomas Gleixner: "This is the final round of converting the notifier mess to the state machine. The removal of the notifiers and the related infrastructure will happen around rc1, as there are conversions outstanding in other trees. The whole exercise removed about 2000 lines of code in total and in course of the conversion several dozen bugs got fixed. The new mechanism allows to test almost every hotplug step standalone, so usage sites can exercise all transitions extensively. There is more room for improvement, like integrating all the pointlessly different architecture mechanisms of synchronizing, setting cpus online etc into the core code" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) tracing/rb: Init the CPU mask on allocation soc/fsl/qbman: Convert to hotplug state machine soc/fsl/qbman: Convert to hotplug state machine zram: Convert to hotplug state machine KVM/PPC/Book3S HV: Convert to hotplug state machine arm64/cpuinfo: Convert to hotplug state machine arm64/cpuinfo: Make hotplug notifier symmetric mm/compaction: Convert to hotplug state machine iommu/vt-d: Convert to hotplug state machine mm/zswap: Convert pool to hotplug state machine mm/zswap: Convert dst-mem to hotplug state machine mm/zsmalloc: Convert to hotplug state machine mm/vmstat: Convert to hotplug state machine mm/vmstat: Avoid on each online CPU loops mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead() tracing/rb: Convert to hotplug state machine oprofile/nmi timer: Convert to hotplug state machine net/iucv: Use explicit clean up labels in iucv_init() x86/pci/amd-bus: Convert to hotplug state machine x86/oprofile/nmi: Convert to hotplug state machine ...
-
由 Lukasz Majewski 提交于
Since I leave Samsung, I would like to step down from maintenance duties. Bartek Zolnierkiewicz will replace. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-