On powerpc ABIv2, if no debug-info is found and we use kallsyms, we need
to fixup the function entry to point to the local entry point. Use
offset of 8 since current toolchains always generate 2 instructions (8
bytes).
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/92253021e77a104b23b615c8c23bf9501dfe60bf.1430217967.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use symbol table lookups by default if DWARF is not necessary, since
powerpc ABIv2 encodes local entry points in the symbol table and the
function entry address in DWARF may not be appropriate for kprobes, as
described here:

https://sourceware.org/bugzilla/show_bug.cgi?id=17638

"The DWARF address ranges deliberately include the *whole* function,
both global and local entry points."
...
"If you want to set probes on a local entry point, you should look up
the symbol in the main symbol table (not DWARF), and check the st_other
bits; they will indicate whether the function has a local entry point,
and what its offset from the global entry point is.  Note that GDB does
the same when setting a breakpoint on a function entry."
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/88a10e22f4aaba2aef812824ca4b10d7beeea012.1430217967.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

ppc64 ELF ABIv2 has a Global Entry Point (GEP) and a Local Entry Point
(LEP). For purposes of probing, we need the LEP - the offset to which is
encoded in st_other.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/ab9cc5e2b9de4cbaaf50f6ef2346a6a81100bad1.1430217967.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow perf probe to work on ppc ABIv1 without the need to specify the
leading dot '.' for functions. 'perf probe do_fork' works with this
patch.

We do this by changing how symbol name comparison works on ppc ABIv1 -
we simply ignore and skip over the initial dot, if one exists, during
symbol name comparison.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/652a8f3bfa919bd02a1836a128370eaed59b4a34.1430217967.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use the proper prefix when ignoring SyS symbols on ppc ABIv1. While at
it, generalize symbol selection so architectures can implement their own
logic.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/adf1f98b121ecaf292777fe5cc69fe1038feabce.1430217967.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If using the symbol table, symbol addresses are not being fixed up
properly, resulting in probes being placed at wrong addresses:

  # perf probe do_fork
  Added new event:
    probe:do_fork        (on do_fork)

  You can now use it in all perf tools, such as:

	  perf record -e probe:do_fork -aR sleep 1

  # cat /sys/kernel/debug/tracing/kprobe_events
  p:probe/do_fork _text+635952
  # printf "%x" 635952
  9b430
  # grep do_fork /boot/System.map
  c0000000000ab430 T .do_fork

Fix by checking for ELF type ET_DYN used by ppc64 kernels.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/41392bb856ef62d929995e0b61967689b7915207.1430217967.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In verbose mode perf bench numa shows also GB/s speed, system and user cpu
time for each particular thread. Using of getrusage() can provide much more
per process or per thread stats in future.
Signed-off-by: NPetr Holasek <pholasek@redhat.com>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1429198699-25039-3-git-send-email-pholasek@redhat.com
[ Rename 'usage' variable to not shadow util.h's usage() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent
change to get it working for Sparc broke arm and arm64 platforms.

Use sysconf to determine the number of online CPUs only parsing
/proc/cpuinfo when sysconf is not available.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150423140454.GJ1652@arm.com
[ Made it fall back to parsing /proc when getconf not found ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As the --children option changes the output of perf report (and perf
top) it sometimes confuses users.  Add more words and examples to help
understanding of the option's behavior - and how to disable it ;-).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1429684425-14987-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Separating metrics values for exclude_idle bit.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-7-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Separating metrics values for guest and host, so we get proper values.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Separating metrics values for exclude_hv bit.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Changing metrics context calculation to allow more than 2 types of
context.

Following patches will add support for the rest of the exclude_* bits so
we need separate array element for all context combinations.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently in perf IPC and other metrics cannot be directly shown
separately for both user and kernel in a single run. The problem was
that the metrics matching code did not check event qualifiers.

With this patch the following case works correctly.

% perf stat -e cycles:k,cycles:u,instructions:k,instructions:u true

 Performance counter stats for 'true':

           531,718      cycles:k
           203,895      cycles:u
           338,151      instructions:k            #    0.64  insns per cycle
           105,961      instructions:u            #    0.52  insns per cycle

       0.002989739 seconds time elapsed

Previously it would misreport the ratios because they were matching the
wrong value.

The patch is fairly big, but quite mechanic as it just adds context
indexes everywhere.
Reported-by: NWilliam Cohen <wcohen@redhat.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-3-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This comes from the desire of having -e/--expr to have the same meaning
as for 'strace', while other perf tools use it for --event, which
'trace' honours, i.e. all perf tools have --event in common, but trace
uses -e for strace's --expr.

Clarify it in the --help output.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5j94bcsdmcbeu2xthnzsj60d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cut't'paste error, fix it.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-26abqh0wg9dci3fqcppyrpxy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix perf-probe --del option to delete all matched probes in both
of kprobes and uprobes at once.

When we have 2 or more events on different binaries as below,

  ----
  # ./perf probe -l
  probe:vfs_read       (on vfs_read@ksrc/linux-3/fs/read_write.c)
  probe_libc:malloc    (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17
  ----

Trying to remove all event with '*' just removes kprobe events at first.
  ----
  # ./perf probe -d \*
  Removed event: probe:vfs_read
  ----

And in 2nd try, it removes all uprobe events.
  ----
  # ./perf probe -d \*
  Removed event: probe_libc:malloc
  ----

This fixes to remove all event at once as below.
  ----
  # ./perf probe -d \*
  Removed event: probe:vfs_read
  Removed event: probe_libc:malloc
  ----
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150423134614.26128.18106.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The --funcs option should be given exclusively.  This adds
PARSE_OPT_EXCUSIVE flag on --funcs (-F) option.

Without this, 'perf probe --funcs -l' just shows the list of probes.

With this, it shows error message correctly.

This also fixes the help message and the documentation.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150423134612.26128.58189.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allowing symbolic events processing to report back error.

  $ perf record -e 'cycles/period=krava/' ls
  event syntax error: '../period=krava/'
                                 \___ expected numeric value

  $ perf record -e 'cycles/name=1/' ls
  event syntax error: '..es/name=1/'
                                 \___ expected string value
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-10-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allowing tracepoint events processing to report back error.

  $ perf record -e 'sched:krava' ls
  event syntax error: 'sched:krava'
                       \___ unknown tracepoint
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-9-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allowing static terms like 'name,period,config,config1..' processing to
report back error.

  $ perf record -e 'cpu/event=1,name=1/' ls
  event syntax error: '..=1,name=1/'
                                 \___ expected string value

  $ perf record -e 'cpu/event=1,period=krava/' ls
  event syntax error: '..,period=krava/'
                                 \___ expected numeric value

  $ perf record -e 'cpu/config=krava1/' ls
  event syntax error: '../config=krava1/'
                                 \___ expected numeric value
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-8-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allowing event's term processing to report back error, like:

  $ perf record -e 'cpu/even=0x1/' ls
  event syntax error: 'cpu/even=0x1/'
                           \___ unknown term

  valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-7-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Saving the terms location within term struct, so it could be used later
for report.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Changing parse_events_add_pmu interface to allow propagating of the
parse_events_error info.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not sure why we allowed the fail state, but it's wrong.  Wrong type for
'name' term can cause segfault, and there's probably more fun hidden.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allowing flex parser to report back event parsing error, like:

  $ perf record -e cycles,cache-mises ls
  event syntax error: '..es,cache-mises'
                                 \___ parser error
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:

  struct parse_events_error {
    int   idx;
    char *str;
    char *help;
  };

where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.

The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:

  $ sudo perf record -e 'sched:krava' ls
  event syntax error: 'sched:krava'
                       \___ unknown tracepoint
  ...

  $ perf record -e 'cpu/even=0x1/' ls
  event syntax error: 'cpu/even=0x1/'
                           \___ unknown term

  valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
  ...

  $ perf record -e cycles,cache-mises ls
  event syntax error: '..es,cache-mises'
                                 \___ parser error
  ...

The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add new AUX area member (aux_watermark) of struct perf_event_attr to
debug prints and byte swapping.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-27-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample.  Some of that
information will be available in the 'flags' member of struct
perf_sample.

With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.

Consequently add an option to display the flags.

The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.

Example using Intel PT:

perf script -fip,time,event,sym,addr,flags

...
 1288.721584105: branches:u:   bo              401146 main =>           401152 main
 1288.721584105: transactions:   x                   0           401164 main
 1288.721584105: branches:u:   bx              40117c main =>           40119b main
 1288.721584105: branches:u:   box             4011a4 main =>           40117e main
 1288.721584105: branches:u:   bcx             401187 main =>           401094 g
...
 1288.721591645: branches:u:   bx              4010c4 g =>           4010cb g
 1288.721591645: branches:u:   brx             4010cc g =>           401189 main
 1288.721591645: transactions:                       0           4011a6 main
 1288.721593199: branches:u:   b               4011a9 main =>           4011af main
 1288.721593199: branches:u:   bo              4011bc main =>           40113e main
 1288.721593199: branches:u:   b               401150 main =>           40115a main
 1288.721593199: transactions:   x                   0           401164 main
 1288.721593199: branches:u:   bx              40117c main =>           40119b main
 1288.721593199: branches:u:   box             4011a4 main =>           40117e main
 1288.721593199: branches:u:   bcx             401187 main =>           40105e f
...
 1288.722284747: branches:u:   brx             401093 f =>           401189 main
 1288.722284747: branches:u:   box             4011a4 main =>           40117e main
 1288.722284747: branches:u:   bcx             401187 main =>           40105e f
 1288.722285883: transactions:   bA                  0           401071 f
 1288.722285883: branches:u:   bA              401071 f =>           40116a main
 1288.722285883: branches:u:   bE              40116a main =>                0 [unknown]
 1288.722297174: branches:u:   bB                   0 [unknown] =>           40116a main
...
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support for decoding an AUX area assuming it contains instruction
tracing data.  The AUX area tracing events are stripped and replaced by
synthesized events.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-21-git-send-email-adrian.hunter@intel.com
[ Do not use -Z as an alternative to --itrace ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

New AUX area tracing events must be re-piped by default.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1429608114-18194-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support for decoding an AUX area assuming it contains instruction
tracing data.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-17-git-send-email-adrian.hunter@intel.com
[ Do not use -Z as an alternative to --itrace ]
[ Fixed initialization of itrace_synth_opts struct fields on older gcc versions ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a member to struct dso that can be used by Instruction Trace
implementations to hold a cache for decoded instructions.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-16-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Decoding AUX area data may involve walking object code.  Rather than
repetitively decoding the same instructions, a cache can be used to
cache the results.

This patch implements a fairly generic hashtable with a 32-bit key that
could be used for other purposes as well.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-15-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Provide hooks so that an AUX area decoder can process AUX area tracing
events.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-14-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In order to process AUX area tracing data in time order, the queue with
data with the lowest timestamp must be processed first.  Provide a heap
to keep track of which queue that is.

As with the queues, a decoder does not have to use the heap, but Intel
BTS and Intel PT will use it.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-13-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Provide functions to queue AUX area tracing data buffers for processing.
A AUX area decoder need not use the queues, however Intel BTS and Intel
PT will use them.

There is one queue for each of the mmap buffers that were used for
recording.  Because those mmaps were associated with per-cpu or
per-thread contexts, the data is time-ordered with respect to those
contexts.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1429608111-18160-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add functions to synthesize, count and print AUX area tracing error
events.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-11-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is assumed that AUX area decoding will synthesize events for
consumption by other tools.

At this time, the main use of AUX area tracing will be to capture
instruction trace (aka processor trace) data.

The nature of instruction tracing suggests the initial inclusion of
options for "instructions" and "branches" events, but more could be
added as needed.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-10-git-send-email-adrian.hunter@intel.com
[ Added ref to tools/perf/Documentation/perf-script.txt describing what is parsed ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Hook into session processing so that AUX area decoding can synthesize
events transparently to the tools.

The advantages of transparent decoding are that tools can be used
directly with perf.data files containing AUX area tracing data, which is
easier for the user and more efficient than having a separate decoding
tool.

This will work as follows:

1. Tools will feed auxtrace events to the decoder using
   perf_tool->auxtrace() (support for that still to come).

2. The decoder can process side-band events as needed due
   to the auxtrace->process_event() hook.

3. The decoder can deliver synthesized events into the
   event stream using perf_session__deliver_synth_event().

Note the expectation is that decoding will work on data that is
time-ordered with respect to the per-cpu or per-thread contexts that
were recorded.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-9-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>